developer/roc.rst

.. vim: syntax=rst

.. _roc-developer-guide:

ROC Development
===============

Background / Development Environment
------------------------------------

This document assumes familiarity with Kubernetes and Helm, and that a Kubernetes/Helm development
environment has already been deployed in the developer’s work environment.

This development environment can use any of a number of potential mechanisms -- including KinD, kubeadm, etc.

The Aether-in-a-Box script is one potential way to setup a development environment, but not the only way.
As an alternative to the developer’s local machine, a remote environment can be set up, for example on
cloud infrastructure such as Cloudlab.

.. note:: When ROC is deployed it is unsecured by default, with no Authentication or Authorization.
    To secure ROC so that the Authentication and Authorization can be tested, follow the Securing ROC
    guide below :ref:`securing_roc`

Installing Prerequisites
------------------------

Atomix and onos-operator must be installed::

   # create necessary namespaces
   kubectl create namespace aether

   # add repos
   helm repo add atomix https://charts.atomix.io
   helm repo add onosproject https://charts.onosproject.org
   helm repo update

   # install atomix
   export ATOMIX_VERSION=1.1.2
   helm -n kube-system install atomix atomix/atomix --version $ATOMIX_VERSION

   # install the onos operator
   ONOS_OPERATOR_VERSION=0.5.6
   helm install -n kube-system onos-operator onosproject/onos-operator --version $ONOS_OPERATOR_VERSION

.. note:: The ROC is sensitive to the versions of Atomix and onos-operator installed. The values
    shown above are correct for the 2.1.36- versions of the *aether-roc-umbrella*.

.. list-table:: ROC support component version matrix
   :widths: 40 20 20 20 20 20
   :header-rows: 1

   * - ROC Version
     - atomix/atomix-controller
     - atomix/atomix-raft
     - atomix/atomix-runtime
     - atomix/atomix
     - onosproject/onos-operator
   * - 1.2.25-1.2.45
     - 0.6.7
     - 0.1.8
     - n/a
     - n/a
     - 0.4.8
   * - 1.3.0-1.3.10
     - 0.6.8
     - 0.1.9
     - n/a
     - n/a
     - 0.4.10
   * - 1.3.11-,1.4.0-
     - 0.6.8
     - 0.1.14
     - n/a
     - n/a
     - 0.4.12
   * - 1.4.42-
     - 0.6.8
     - 0.1.15
     - n/a
     - n/a
     - 0.4.14
   * - 2.0.29-
     - 0.6.8
     - 0.1.16
     - n/a
     - n/a
     - 0.5.1
   * - 2.1.8-
     - 0.6.9
     - 0.1.26
     - n/a
     - n/a
     - 0.5.3
   * - 2.1.32-2.1.35
     - n/a
     - n/a
     - 0.1.8
     - n/a
     - 0.5.6
   * - 2.1.36-
     - n/a
     - n/a
     - n/a
     - 1.1.2
     - 0.5.6

.. note::
    Changing between atomix and operators in a cluster may cause problems if there are changes in the definition of
    the CRDs that they include. To fully ensure a clean installation the CRDs should be deleted manually AFTER deleting
    the old version of atomix or Onos Operator.

    Use `kubectl get crds | grep atomix` and `kubectl get crds | grep onos` to see the CRDs present.

Verify that these services were installed properly.
You should see pods for *atomix-controller(s)*
*onos-operator-app*, and *onos-operator-topo*.
Execute these commands::

   helm -n kube-system list
   kubectl -n kube-system get pods | grep -i atomix
   kubectl -n kube-system get pods | grep -i onos


Installing the ``aether-roc-umbrella`` Helm chart
-------------------------------------------------

Add the necessary helm repositories::

   helm repo add aether https://charts.aetherproject.org

``aether-roc-umbrella`` will bring up the ROC and its services::

   helm -n aether install aether-roc-umbrella aether/aether-roc-umbrella

   kubectl wait pod -n aether --for=condition=Ready -l type=config --timeout=300s


.. _posting-the-mega-patch:

Posting the mega-patch
----------------------

The ROC usually comes up in a blank state -- there are no Enterprises, UEs, or other artifacts present in it.
The mega-patch is an example patch that populates the ROC with some sample enterprises, UEs, slices, etc.

Execute the following::

   # launch a port-forward for the API
   # this will continue to run in the background

   kubectl -n aether port-forward service/aether-roc-api   --address 0.0.0.0 8181:8181 &

   curl http://localhost:8181/targets
   # It should show a list of the configure enterprises: [{"name":"defaultent"},{"name":"acme"},{"name":"starbucks"}

   git clone https://github.com/onosproject/aether-roc-api.git

   # execute the mega-patch (it will post via CURL to localhost:8181)
   bash ~/path/to/aether-roc-api/examples/MEGA_Patch_20.curl

.. note:: To configure Aether-In-a-Box - no port-forward is necessary - use the URL *http://<hostname>:31194/aether-roc-api/*

You may wish to customize the mega patch.

For example, by default the patch configures the ``sdcore-adapter`` to push to
``sdcore-test-dummy``.

You could configure it to push to a live aether-in-a-box core by doing something like this::

   sed -i 's^http://aether-roc-umbrella-sdcore-test-dummy/v1/config/5g^http://webui.omec.svc.cluster.local:9089/config^g' MEGA_Patch_21.curl

   #apply the patch
   ./MEGA_Patch_20.curl

(Note that if your Aether-in-a-Box was installed on a different machine that port-forwarding may be necessary)


Expected CURL output from a successful mega-patch post will be a UUID.

You can also verify that the mega-patch was successful by going into the
``aether-roc-gui`` in a browser (see the section on useful port-forwards
below). The GUI may open to a dashboard that is unpopulated -- you can use the
dropdown menu (upper-right hand corner of the screen) to select an object such
as Slice and you will see a list of slices.

   |ROCGUI|

Adding new Enterprises
----------------------

Enterprises are stored in `onos-topo` outside of `onos-config` are are usually only created by system administrators
during the onboarding of new customers (tenants) on Aether.

There is currently no way of adding new Enterprises through the ROC GUI or the ROC API - it can be
done in the 2 ways in the following sections.

Enterprises are specified as Entities using CRDs, and the `onos-operator` ensures that these are created
as `entitites` inside `onos-topo`.

To check that the current list of enterprises (as CRDs), the following command may be used::

   kubectl -n aether get entities

and to check that the `onos-operator` does indeed take effect, the ROC API endpoint `/targets` can be used to list the
`enterprises`.

Another option is to use the `onos-cli` pod to query `onos-topo` directly::

    kubectl -n aether exec deployment/onos-cli -- onos topo get entities -v

Adding new Enterprises through Helm Chart
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

To have an entity added at **start up of the cluster** it can be added through the Helm Chart in the `values.yaml`
under `enterprises`. e.g.::

   enterprises:
   - id: starbucks
     name: Starbucks Enterprise
     lat: 52.5150
     long: 13.3885

This will load the `enterprise` as an Entity CRD through the `onos-operator`.

Adding new Enterprises through `onos-topo`
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

New `enterprises` can be added to a live running system through the `onos-topo` command line (bypassing
the `onos-operator`). For example::

    kubectl -n aether exec deployment/onos-cli -- \
    onos topo create entity new-enterprise \
    -a onos.topo.Configurable='{"address”:”sdcore-adapter-v2-1:5150”,”version”:”2.1.x”,”type”:”aether”}' \
    -a onos.topo.TLSOptions='{"insecure":true}' \
    -a onos.topo.Asset='{"name”:”New Enterprise”}' \
    -a onos.topo.MastershipState='{}' \
    -k enterprise

Uninstalling the ``aether-roc-umbrella`` Helm chart
---------------------------------------------------

To tear things back down, usually as part of a developer loop prior to redeploying again, do the following::

   helm -n aether del aether-roc-umbrella

Useful port forwards
--------------------

Port forwarding is often necessary to allow access to ports inside of Kubernetes pods that use ClusterIP addressing.
Note that you typically need to leave a port-forward running (you can put it in the background).
Also, If you redeploy the ROC and/or if a pod crashes then you might have to restart a port-forward.

.. note:: With Aether-In-a-Box no port-forward is necessary - the GUI can be accessed
    at ``http://<hostname>:31194`` and the API at ``http://<hostname>:31194/aether-roc-api/``

The following port-forwards may be useful::

   # aether-roc-api

   kubectl -n aether port-forward service/aether-roc-api --address 0.0.0.0 8181:8181

   # aether-roc-gui

   kubectl -n aether port-forward service/aether-roc-gui-v2-1 --address 0.0.0.0 8183:80

   # grafana

   kubectl -n aether port-forward service/aether-roc-umbrella-grafana --address 0.0.0.0 8187:80

.. note:: Internally the ``aether-roc-gui`` operates a Reverse Proxy on the ``aether-roc-api``. This
    means that if you have done a ``port-forward`` to ``aether-roc-gui`` say on port ``8183`` there's no
    need to do another on the ``aether-roc-api`` instead you can access the API on
    ``http://localhost:8183/aether-roc-api``

Deploying using custom images
-----------------------------

Custom images may be used by editing the values-override.yaml file.
For example, to deploy a custom ``sdcore-adapter``::

   sdcore-adapter-v2-1:
     prometheusEnabled: false
   image:
     repository: my-private-repo/sdcore-adapter
     tag: my-tag
     pullPolicy: Always

The above example assumes you have published a docker images at ``my-private-repo/sdcore-adapter:my-tag``.
My particular workflow is to deploy a local-docker registry and push my images to that.
Please do not publish ONF images to a public repository unless the image is intended to be public.
Several ONF repositories are private, and therefore their docker artifacts should also be private.

There are alternatives to using a private docker repository.
For example, if you are using kubeadm, then you may be able to simply tag the image locally.
If you’re using KinD, then you can push a local image to into the kind cluster::

   kind load docker-image sdcore-adapter:my-tag

Developing using a custom onos-config
-------------------------------------

The onos-config helm chart is responsible for loading model plugins at runtime. You can override which
plugins it loads, and optionally override the image for onos-config as well. For example::

    onos-config:
      image:
        tag: mytag
        repository: mydockeraccount/onos-config
      modelPlugins:
      - name: aether-2
        image: onosproject/aether-2.0.x:2.0.16-aether-2.0.x
        endpoint: localhost
        port: 5152
      - name: aether-2-1
        image: onosproject/aether-2.1.x:2.1.16-aether-2.1.x
        endpoint: localhost
        port: 5153

In the above example, the onos-config image will be pulled from `mydockeraccount`, and it will install
two plugins for v2 and v4 models, from that same docker account.

Inspecting logs
---------------

Most of the relevant Kubernetes pods are in the aether namespace.
The names may change from deployment to deployment, so start by getting a list of pods::

   kubectl -n aether get pods

Then you can inspect a specific pod/container::

   kubectl -n aether logs deployment/sdcore-adapter-v2-1

.. _securing_roc:

Securing ROC
------------

Running your own Keycloak Server
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. note:: Unfortunately there is no longer a central keycloak server for development as there was
    at `keycloak-dev.onlab.us`, so you must run your own own Keycloak server inside of Kubernetes.

See `Keycloak README.md <https://gerrit.opencord.org/plugins/gitiles/roc-helm-charts/+/refs/heads/master/keycloak/>`_ for details.

It has the following users by default.

+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+
| User             | login    | AetherROCAdmin  | EnterpriseAdmin | starbucks | acme | defaultent | aiab-enterprise |
+==================+==========+=================+=================+===========+======+============+=================+
| Alice Admin      | alicea   |        ✓        |                 |           |      |            |                 |
+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+
| Bob Cratchit     | bobc     |                 |                 |           |      |            |                 |
+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+
| Charlie Brown    | charlieb |                 |                 |           |      |            |                 |
+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+
| Daisy Duke       | daisyd   |                 |         ✓       |      ✓    |      |            |        ✓        |
+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+
| Elmer Fudd       | elmerf   |                 |                 |      ✓    |      |            |        ✓        |
+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+
| Fred Flintstone  | fredf    |                 |         ✓       |           |   ✓  |      ✓     |                 |
+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+
| Gandalf The Grey | gandalfg |                 |                 |           |   ✓  |      ✓     |                 |
+------------------+----------+-----------------+-----------------+-----------+------+------------+-----------------+


When running it should be available at *http://localhost:8080/realms/master/.well-known/openid-configuration*.

.. note:: You can access the Keycloak management page from *http://localhost:8080/admin* but you must
    login as `admin`. Because of the SSO feature of Keycloak this will affect your Aether ROC GUI login too.
    To login as 2 separate users at the same time, use a private browser window for one.

.. note:: Services inside the cluster (e.g. onos-config) should set the issuer to *https://keycloak/realms/master*
    on port 80, while the aether-roc-gui should use `http://localhost:8080/realms/master`

Enabling security in the cluster
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

When deploying ROC with the ``aether-roc-umbrella`` chart, secure mode can be enabled by
specifying an OpenID Connect (OIDC) issuer like::

    helm -n aether install aether-roc-umbrella aether/aether-roc-umbrella \
        --set onos-config.openidc.issuer=http://keycloak/realms/master \
        --set onos-config.openpolicyagent.enabled=true \
        --set onos-config.openpolicyagent.regoConfigMap=aether-roc-umbrella-opa-rbac \
        --set aether-roc-api.openidc.issuer=http://keycloak/realms/master \
        --set aether-roc-gui-v2-1.openidc.issuer=http://localhost:8080/realms/master \
        --set prom-label-proxy-acc.config.openidc.issuer=http://keycloak/realms/master \
        --set prom-label-proxy-amp.config.openidc.issuer=http://keycloak/realms/master

The choice of OIDC issuer in this case is the **local** Keycloak server at *http://keycloak* inside the `aether` namespace.


As any OIDC server can work with ROC you can alternately use ``dex-ldap-umbrella``
(`deprecated <https://github.com/onosproject/onos-helm-charts/tree/master/dex-ldap-umbrella>`_).

Production Environment
^^^^^^^^^^^^^^^^^^^^^^
In a production environment, the public Aether Keycloak (with its LDAP server populated with real Aether users and groups) should be used.
See `public keycloak <https://keycloak.opennetworking.org/auth/realms/master/.well-known/openid-configuration>`_ for more details.

.. note:: Your RBAC access to ROC will be limited by the groups you belong to in its LDAP store.

Role Based Access Control
^^^^^^^^^^^^^^^^^^^^^^^^^

When secured, access to the configuration in ROC is limited by the **groups** that a user belongs to.

* **AetherROCAdmin** - users in this group have full read **and** write access to all configuration.
* *<enterprise>* - users in a group the lowercase name of an enterprise, will have **read** access to that enterprise.
* **EnterpriseAdmin** - users in this group will have read **and** write access the enterprise they belong to.

    For example in *keycloak-389-umbrella* the user *Daisy Duke* belongs to *starbucks* **and**
    *EnterpriseAdmin* and so has read **and** write access to items linked with *starbucks* enterprise.

    By comparison the user *Elmer Fudd* belongs only to *starbucks* group and so has only **read** access to items
    linked with the *starbucks* enterprise.

Requests to a Secure System
^^^^^^^^^^^^^^^^^^^^^^^^^^^

When configuration is retrieved or updated  through *aether-config*, a Bearer Token in the
form of a JSON Web Token (JWT) issued by the selected OIDC Issuer server must accompany
the request as an Authorization Header.

This applies to both the REST interface of ``aether-roc-api`` **and** the *gnmi* interface of
``aether-config``.

In the Aether ROC, a Bearer Token can be generated by logging in and selecting API Key from the
menu. This pops up a window with a copy button, where the key can be copied.

Alternatively with Keycloak a Token may be requested programmatically through the Keycloak API::

    curl --location --request POST 'http://localhost:8080/realms/master/protocol/openid-connect/token' \
    --header 'Content-Type: application/x-www-form-urlencoded' \
    --data-urlencode 'grant_type=password' \
    --data-urlencode 'client_id=aether-roc-gui' \
    --data-urlencode 'username=alicea' \
    --data-urlencode 'password=password' \
    --data-urlencode 'scope=openid profile email groups' | jq "{access_token}"


The key will expire after 24 hours.

.. image:: images/aether-roc-gui-copy-api-key.png
    :width: 580
    :alt: Aether ROC GUI allows copying of API Key to clipboard

Accessing the REST interface from a tool like Postman, should include this Auth token.

.. image:: images/postman-auth-token.png
    :width: 930
    :alt: Postman showing Authentication Token pasted in

Logging
"""""""

The logs of *aether-config* will contain the **username** and **timestamp** of
any **gnmi** call when security is enabled.

.. image:: images/aether-config-log.png
    :width: 887
    :alt: aether-config log message showing username and timestamp

Accessing GUI from an external system
"""""""""""""""""""""""""""""""""""""

To access the ROC GUI from a computer outside the Cluster machine using *port-forwarding* then
it is necessary to:

* Ensure that all *port-forward*'s have **--address=0.0.0.0**
* Add to the IP address of the cluster machine to the **/etc/hosts** of the outside computer as::

    <ip address of cluster> k3u-keycloak aether-roc-gui
* Verify that you can access the Keycloak server by its name *http://localhost:8080/realms/master/.well-known/openid-configuration*
* Access the GUI through the hostname (rather than ip address) ``http://aether-roc-gui:8183``

Troubleshooting Secure Access
"""""""""""""""""""""""""""""

While every effort has been made to ensure that securing Aether is simple and effective,
some difficulties may arise.

One of the most important steps is to validate that the OIDC Issuer (Keycloak server) can be reached
from the browser. The **well_known** URL should be available and show the important endpoints are correct.

.. image:: images/keycloak-389-umbrella-well-known.png
    :width: 580
    :alt: Keycloak Well Known page

If logged out of the Browser when accessing the Aether ROC GUI, accessing any page of the application should
redirect to the Keycloak login page.

.. image:: images/keycloak-ldap-login-page.png
    :width: 493
    :alt: Keycloak Login page

When logged in the User details can be seen by clicking the User's name in the drop down menu.
This shows the **groups** that the user belongs to, and can be used to debug RBAC issues.

.. image:: images/aether-roc-gui-user-details.png
    :width: 700
    :alt: User Details page

When you sign out of the ROC GUI, if you are not redirected to the Keycloak Login Page,
you should check the Developer Console of the browser. The console should show the correct
OIDC issuer (Keycloak server), and that Auth is enabled.

.. image:: images/aether-roc-gui-console-loggedin.png
    :width: 418
    :alt: Browser Console showing correct configuration


ROC Data Model Conventions and Requirements
-------------------------------------------

The MEGA-Patch described above will bring up a fully compliant sample data model.
However, it may be useful to bring up your own data model, customized to a different
site of sites. This subsection documents conventions and requirements for the Aether
modeling within the ROC.

The ROC models must be configured with the following:

* A default enterprise with the id `defaultent`.
* A default site with the id `defaultent-defaultsite`.
  This site should be within the `defaultent` enterprise.
  This site is used by ``subscriber-proxy`` to place detected SIM Cards that cannot
  be matched to an existing site.

Some exercises to get familiar
------------------------------

1. Deploy the ROC and POST the mega-patch, go into the ``aether-roc-gui`` and click
   through the Slice, DeviceGroup, and other objects to see that they were
   created as expected.

2. Examine the log of the ``sdcore-adapter-v2`` container.  It should be
   attempting to push the mega-patch’s changes.  If you don’t have a core
   available, it may be failing the push, but you should see the attempts.

3. Change an object in the GUI.  Watch the ``sdcore-adapter-v2`` log file and
   see that the adapter attempts to push the change.

4. Try POSTing a change via the API.  Observe the ``sdcore-adapter-v2`` log
   file and see that the adapter attempts to push the change.

5. Deploy a 5G Aether-in-a-Box (See :doc:`Setting Up Aether-in-a-Box
   <aiab>`), modify the mega-patch to specify the URL for the Aether-in-a-Box
   ``webui`` container, POST the mega-patch, and observe that the changes were
   correctly pushed via the ``sdcore-adapter-v2`` into the ``sd-core``’s
   ``webui`` container (``webui`` container log will show configuration as it
   is received)

.. |ROCGUI| image:: images/rocgui.png
    :width: 945
    :alt: ROC GUI showing list of Slices