| .. |
| SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org> |
| SPDX-License-Identifier: Apache-2.0 |
| |
| VPN Bootstrap |
| ============= |
| |
| This section walks you through how to set up a VPN between ACE and Aether |
| Central in GCP. We will be using GitOps based Aether CD pipeline for this, so |
| we just need to create a patch to **aether-pod-configs** repository. Note that |
| some of the steps described here are not directly related to setting up a VPN, |
| but rather are a prerequisite for adding a new ACE. |
| |
| .. attention:: |
| |
| If you are adding another ACE to an existing VPN connection, go to |
| :ref:`Add ACE to an existing VPN connection <add_ace_to_vpn>` |
| |
| Before you begin |
| ---------------- |
| |
| * Make sure firewall in front of ACE allows UDP port 500, UDP port 4500, and |
| ESP packets from **gcpvpn1.infra.aetherproject.net(35.242.47.15)** and |
| **gcpvpn2.infra.aetherproject.net(34.104.68.78)** |
| |
| * Make sure that the external IP on ACE side is owned by or routed to the |
| management node |
| |
| To help your understanding, the following sample ACE environment will be used |
| in the rest of this section. Make sure to replace the sample values when you |
| actually create a review request. |
| |
| +-----------------------------+----------------------------------+ |
| | Management node external IP | 128.105.144.189 | |
| +-----------------------------+----------------------------------+ |
| | ASN | 65003 | |
| +-----------------------------+----------------------------------+ |
| | GCP BGP IP address | Tunnel 1: 169.254.0.9/30 | |
| | +----------------------------------+ |
| | | Tunnel 2: 169.254.1.9/30 | |
| +-----------------------------+----------------------------------+ |
| | ACE BGP IP address | Tunnel 1: 169.254.0.10/30 | |
| | +----------------------------------+ |
| | | Tunnel 2: 169.254.1.10/30 | |
| +-----------------------------+----------------------------------+ |
| | PSK | UMAoZA7blv6gd3IaArDqgK2s0sDB8mlI | |
| +-----------------------------+----------------------------------+ |
| | Management Subnet | 10.91.0.0/24 | |
| +-----------------------------+----------------------------------+ |
| | K8S Subnet | Pod IP: 10.66.0.0/17 | |
| | +----------------------------------+ |
| | | Cluster IP: 10.66.128.0/17 | |
| +-----------------------------+----------------------------------+ |
| |
| Download aether-pod-configs repository |
| -------------------------------------- |
| |
| .. code-block:: shell |
| |
| $ cd $WORKDIR |
| $ git clone "ssh://[username]@gerrit.opencord.org:29418/aether-pod-configs" |
| |
| .. _update_global_resource: |
| |
| Update global resource maps |
| --------------------------- |
| |
| Add a new ACE information at the end of the following global resource maps. |
| |
| * ``user_map.tfvars`` |
| * ``cluster_map.tfvars`` |
| * ``vpn_map.tfvars`` |
| |
| As a note, you can find several other global resource maps under the |
| ``production`` directory. Resource definitions that need to be shared among |
| clusters or are better managed in a single file to avoid configuration |
| conflicts are maintained in this way. |
| |
| .. code-block:: diff |
| |
| $ cd $WORKDIR/aether-pod-configs/production |
| $ vi user_map.tfvars |
| |
| # Add the new cluster admin user at the end of the map |
| $ git diff user_map.tfvars |
| --- a/production/user_map.tfvars |
| +++ b/production/user_map.tfvars |
| @@ user_map = { |
| username = "menlo" |
| password = "changeme" |
| global_roles = ["user-base", "catalogs-use"] |
| + }, |
| + test_admin = { |
| + username = "test" |
| + password = "changeme" |
| + global_roles = ["user-base", "catalogs-use"] |
| } |
| } |
| |
| .. code-block:: diff |
| |
| $ cd $WORKDIR/aether-pod-configs/production |
| $ vi cluster_map.tfvars |
| |
| # Add the new K8S cluster information at the end of the map |
| $ git diff cluster_map.tfvars |
| --- a/production/cluster_map.tfvars |
| +++ b/production/cluster_map.tfvars |
| @@ cluster_map = { |
| kube_dns_cluster_ip = "10.53.128.10" |
| cluster_domain = "prd.menlo.aetherproject.net" |
| calico_ip_detect_method = "can-reach=www.google.com" |
| + }, |
| + ace-test = { |
| + cluster_name = "ace-test" |
| + management_subnets = ["10.91.0.0/24"] |
| + k8s_version = "v1.18.8-rancher1-1" |
| + k8s_pod_range = "10.66.0.0/17" |
| + k8s_cluster_ip_range = "10.66.128.0/17" |
| + kube_dns_cluster_ip = "10.66.128.10" |
| + cluster_domain = "prd.test.aetherproject.net" |
| + calico_ip_detect_method = "can-reach=www.google.com" |
| } |
| } |
| } |
| |
| .. code-block:: diff |
| |
| $ cd $WORKDIR/aether-pod-configs/production |
| $ vi vpn_map.tfvars |
| |
| # Add VPN and tunnel information at the end of the map |
| $ git diff vpn_map.tfvars |
| --- a/production/vpn_map.tfvars |
| +++ b/production/vpn_map.tfvars |
| @@ vpn_map = { |
| bgp_peer_ip_address_1 = "169.254.0.6" |
| bgp_peer_ip_range_2 = "169.254.1.5/30" |
| bgp_peer_ip_address_2 = "169.254.1.6" |
| + }, |
| + ace-test = { |
| + peer_name = "production-ace-test" |
| + peer_vpn_gateway_address = "128.105.144.189" |
| + tunnel_shared_secret = "UMAoZA7blv6gd3IaArDqgK2s0sDB8mlI" |
| + bgp_peer_asn = "65003" |
| + bgp_peer_ip_range_1 = "169.254.0.9/30" |
| + bgp_peer_ip_address_1 = "169.254.0.10" |
| + bgp_peer_ip_range_2 = "169.254.1.9/30" |
| + bgp_peer_ip_address_2 = "169.254.1.10" |
| } |
| } |
| |
| .. note:: |
| Unless you have a specific requirement, set ASN and BGP addresses to the next available values in the map. |
| |
| |
| Create ACE specific configurations |
| ---------------------------------- |
| |
| In this step, we will create a directory under `production` with the same name |
| as ACE, and add several Terraform configurations and Ansible inventory needed |
| to configure a VPN connection. |
| |
| Throughout the deployment procedure, this directory will contain all ACE |
| specific configurations. |
| |
| Run the following commands to auto-generate necessary files under the target |
| ACE directory. |
| |
| .. code-block:: shell |
| |
| $ cd $WORKDIR/aether-pod-configs/tools |
| $ cp ace_env /tmp/ace_env |
| $ vi /tmp/ace_env |
| # Set environment variables |
| |
| $ source /tmp/ace_env |
| $ make vpn |
| Created ../production/ace-test |
| Created ../production/ace-test/main.tf |
| Created ../production/ace-test/variables.tf |
| Created ../production/ace-test/gcp_fw.tf |
| Created ../production/ace-test/gcp_ha_vpn.tf |
| Created ../production/ace-test/ansible |
| Created ../production/ace-test/backend.tf |
| Created ../production/ace-test/cluster_val.tfvars |
| Created ../production/ace-test/ansible/hosts.ini |
| Created ../production/ace-test/ansible/extra_vars.yml |
| |
| .. attention:: |
| The predefined templates are tailored to Pronto BOM. You'll need to fix `cluster_val.tfvars` and `ansible/extra_vars.yml` |
| when using a different BOM. |
| |
| Create a review request |
| ----------------------- |
| |
| .. code-block:: shell |
| |
| $ cd $WORKDIR/aether-pod-configs/production |
| $ git status |
| On branch tools |
| Changes not staged for commit: |
| |
| modified: cluster_map.tfvars |
| modified: user_map.tfvars |
| modified: vpn_map.tfvars |
| |
| Untracked files: |
| (use "git add <file>..." to include in what will be committed) |
| |
| ace-test/ |
| |
| $ git add . |
| $ git commit -m "Add test ACE" |
| $ git review |
| |
| Once the review request is accepted and merged, |
| CD pipeline will create VPN tunnels on both GCP and the management node. |
| |
| Verify VPN connection |
| --------------------- |
| |
| You can verify the VPN connections after successful post-merge job by checking |
| the routing table on the management node and trying to ping to one of the |
| central cluster VMs. |
| |
| Make sure two tunnel interfaces, `gcp_tunnel1` and `gcp_tunnel2`, exist |
| and three additional routing entries via one of the tunnel interfaces. |
| |
| .. code-block:: shell |
| |
| # Verify routings |
| $ netstat -rn |
| Kernel IP routing table |
| Destination Gateway Genmask Flags MSS Window irtt Iface |
| 0.0.0.0 128.105.144.1 0.0.0.0 UG 0 0 0 eno1 |
| 10.45.128.0 169.254.0.9 255.255.128.0 UG 0 0 0 gcp_tunnel1 |
| 10.52.128.0 169.254.0.9 255.255.128.0 UG 0 0 0 gcp_tunnel1 |
| 10.66.128.0 10.91.0.8 255.255.128.0 UG 0 0 0 eno1 |
| 10.91.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eno1 |
| 10.168.0.0 169.254.0.9 255.255.240.0 UG 0 0 0 gcp_tunnel1 |
| 128.105.144.0 0.0.0.0 255.255.252.0 U 0 0 0 eno1 |
| 169.254.0.8 0.0.0.0 255.255.255.252 U 0 0 0 gcp_tunnel1 |
| 169.254.1.8 0.0.0.0 255.255.255.252 U 0 0 0 gcp_tunnel2 |
| |
| # Verify ACC VM access |
| $ ping 10.168.0.6 |
| |
| # Verify ACC K8S cluster access |
| $ nslookup kube-dns.kube-system.svc.prd.acc.gcp.aetherproject.net 10.52.128.10 |
| |
| You can further verify whether the ACE routes are propagated well to GCP |
| by checking GCP dashboard **VPC Network > Routes > Dynamic**. |
| |
| |
| Post VPN setup |
| -------------- |
| |
| Once you verify the VPN connections, please update `ansible` directory name to |
| `_ansible` to prevent the ansible playbook from running again. Note that it is |
| no harm to re-run the ansible playbook but not recommended. |
| |
| .. code-block:: shell |
| |
| $ cd $WORKDIR/aether-pod-configs/production/$ACE_NAME |
| $ mv ansible _ansible |
| $ git add . |
| $ git commit -m "Mark ansible done for test ACE" |
| $ git review |
| |
| .. _add_ace_to_vpn: |
| |
| Add another ACE to an existing VPN connection |
| """"""""""""""""""""""""""""""""""""""""""""" |
| |
| VPN connections can be shared when there are multiple ACE clusters in a site. |
| In order to add ACE to an existing VPN connection, you'll have to SSH into the |
| management node and manually update BIRD configuration. |
| |
| .. note:: |
| |
| This step needs improvements in the future. |
| |
| .. code-block:: shell |
| |
| $ sudo vi /etc/bird/bird.conf |
| protocol static { |
| ... |
| route 10.66.128.0/17 via 10.91.0.10; |
| |
| # Add routings for the new ACE's K8S cluster IP range via cluster nodes |
| # TODO: Configure iBGP peering with Calico nodes and dynamically learn these routings |
| route <NEW-ACE-CLUSTER-IP> via <SERVER1> |
| route <NEW-ACE-CLUSTER-IP> via <SERVER2> |
| route <NEW-ACE-CLUSTER-IP> via <SERVER3> |
| } |
| |
| filter gcp_tunnel_out { |
| # Add the new ACE's K8S cluster IP range and the management subnet if required to the list |
| if (net ~ [ 10.91.0.0/24, 10.66.128.0/17, <NEW-ACE-CLUSTER-IP-RANGE> ]) then accept; |
| else reject; |
| } |
| # Save and exit |
| |
| $ sudo birdc configure |
| |
| # Confirm the static routes are added |
| $ sudo birdc show route |
| |