blob: fc2b282bd7e0ff60c54f6fba6ee22febea1ac826 [file] [log] [blame]
.. vim: syntax=rst
.. _roc-developer-guide:
Aether ROC Developer Guide
==========================
Background / Development Environment
------------------------------------
This document assumes familiarity with Kubernetes and Helm, and that a Kubernetes/Helm development
environment has already been deployed in the developer’s work environment.
This development environment can use any of a number of potential mechanisms -- including KinD, kubeadm, etc.
The Aether-in-a-Box script is one potential way to setup a development environment, but not the only way.
As an alternative to the developer’s local machine, a remote environment can be set up, for example on
cloud infrastructure such as Cloudlab.
.. note:: When ROC is deployed it is unsecured by default, with no Authentication or Authorization.
To secure ROC so that the Authentication and Authorization can be tested, follow the Securing ROC
guide below :ref:`securing_roc`
Installing Prerequisites
------------------------
Atomix and onos-operator must be installed::
# create necessary namespaces
kubectl create namespace micro-onos
# add repos
helm repo add atomix https://charts.atomix.io
helm repo add onosproject https://charts.onosproject.org
helm repo update
# install atomix
export ATOMIX_CONTROLLER_VERSION=0.6.8
helm -n kube-system install atomix-controller atomix/atomix-controller --version $ATOMIX_CONTROLLER_VERSION
export ATOMIX_RAFT_VERSION=0.1.16
helm -n kube-system install atomix-raft-storage atomix/atomix-raft-storage --version $ATOMIX_RAFT_VERSION
# install the onos operator
ONOS_OPERATOR_VERSION=0.5.1
helm install -n kube-system onos-operator onosproject/onos-operator --version $ONOS_OPERATOR_VERSION
.. note:: The ROC is sensitive to the versions of Atomix and onos-operator installed. The values
shown above are correct for the 1.4.42- versions of the *aether-roc-umbrella*.
.. list-table:: ROC support component version matrix
:widths: 40 20 20 20
:header-rows: 1
* - ROC Version
- Atomix Controller
- Atomix Raft
- Onos Operator
* - 1.2.25-1.2.45
- 0.6.7
- 0.1.8
- 0.4.8
* - 1.3.0-1.3.10
- 0.6.8
- 0.1.9
- 0.4.10
* - 1.3.11-,1.4.0-
- 0.6.8
- 0.1.14
- 0.4.12
* - 1.4.42-
- 0.6.8
- 0.1.15
- 0.4.14
* - 2.0.29-
- 0.6.8
- 0.1.16
- 0.5.1
Verify that these services were installed properly.
You should see pods for *atomix-controller*, *atomix-raft-storage-controller*,
*onos-operator-config*, and *onos-operator-topo*.
Execute these commands::
helm -n kube-system list
kubectl -n kube-system get pods | grep -i atomix
kubectl -n kube-system get pods | grep -i onos
Create a values-override.yaml
-----------------------------
You’ll want to override several of the defaults in the ROC helm charts::
cat > values-override.yaml <<EOF
import:
onos-gui:
enabled: true
onos-gui:
ingress:
enabled: false
aether-roc-gui-v2:
ingress:
enabled: false
EOF
Installing the ``aether-roc-umbrella`` Helm chart
-------------------------------------------------
Add the necessary helm repositories::
helm repo add aether https://charts.aetherproject.org
``aether-roc-umbrella`` will bring up the ROC and its services::
helm -n micro-onos install aether-roc-umbrella aether/aether-roc-umbrella -f values-override.yaml
kubectl wait pod -n micro-onos --for=condition=Ready -l type=config --timeout=300s
.. _posting-the-mega-patch:
Posting the mega-patch
----------------------
The ROC usually comes up in a blank state -- there are no Enterprises, UEs, or other artifacts present in it.
The mega-patch is an example patch that populates the ROC with some sample enterprises, UEs, slices, etc.
Execute the following::
# launch a port-forward for the API
# this will continue to run in the background
kubectl -n micro-onos port-forward service/aether-roc-api --address 0.0.0.0 8181:8181 &
git clone https://github.com/onosproject/aether-roc-api.git
# execute the mega-patch (it will post via CURL to localhost:8181)
bash ~/path/to/aether-roc-api/examples/MEGA_Patch_20.curl
You may wish to customize the mega patch.
For example, by default the patch configures the ``sdcore-adapter`` to push to
``sdcore-test-dummy``.
You could configure it to push to a live aether-in-a-box core by doing something like this::
sed -i 's^http://aether-roc-umbrella-sdcore-test-dummy/v1/config/5g^http://webui.omec.svc.cluster.local:9089/config^g' MEGA_Patch_20.curl
#apply the patch
./MEGA_Patch_20.curl
(Note that if your Aether-in-a-Box was installed on a different machine that port-forwarding may be necessary)
Expected CURL output from a successful mega-patch post will be a UUID.
You can also verify that the mega-patch was successful by going into the
``aether-roc-gui`` in a browser (see the section on useful port-forwards
below). The GUI may open to a dashboard that is unpopulated -- you can use the
dropdown menu (upper-right hand corner of the screen) to select an object such
as Slice and you will see a list of slices.
|ROCGUI|
Uninstalling the ``aether-roc-umbrella`` Helm chart
---------------------------------------------------
To tear things back down, usually as part of a developer loop prior to redeploying again, do the following::
helm -n micro-onos del aether-roc-umbrella
If the uninstall hangs or if a subsequent reinstall hangs, it could be an issue with some of the CRDs
not getting cleaned up. The following may be useful::
# fix stuck finalizers in operator CRDs
kubectl -n micro-onos patch entities connectivity-service-v2 --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]' && \
kubectl -n micro-onos patch entities plproxy-amp --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]' && \
kubectl -n micro-onos patch entities plproxy-acc --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]' && \
kubectl -n micro-onos patch kind plproxy --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]' && \
kubectl -n micro-onos patch kind aether --type json --patch='[ { "op": "remove", "path": "/metadata/finalizers" } ]'
Useful port forwards
--------------------
Port forwarding is often necessary to allow access to ports inside of Kubernetes pods that use ClusterIP addressing.
Note that you typically need to leave a port-forward running (you can put it in the background).
Also, If you redeploy the ROC and/or if a pod crashes then you might have to restart a port-forward.
The following port-forwards may be useful::
# aether-roc-api
kubectl -n micro-onos port-forward service/aether-roc-api --address 0.0.0.0 8181:8181
# aether-roc-gui
kubectl -n micro-onos port-forward service/aether-roc-gui-v2 --address 0.0.0.0 8183:80
# grafana
kubectl -n micro-onos port-forward service/aether-roc-umbrella-grafana --address 0.0.0.0 8187:80
``aether-roc-api`` and ``aether-roc-gui`` are in our experience the most useful two port-forwards.
``aether-roc-api`` is useful to be able to POST REST API requests.
``aether-roc-gui`` is useful to be able to interactively browse the current configuration.
.. note:: Internally the ``aether-roc-gui`` operates a Reverse Proxy on the ``aether-roc-api``. This
means that if you have done a ``port-forward`` to ``aether-roc-gui`` say on port ``8183`` there's no
need to do another on the ``aether-roc-api`` instead you can access the API on
``http://localhost:8183/aether-roc-api``
Deploying using custom images
-----------------------------
Custom images may be used by editing the values-override.yaml file.
For example, to deploy a custom ``sdcore-adapter``::
sdcore-adapter-v2:
prometheusEnabled: false
image:
repository: my-private-repo/sdcore-adapter
tag: my-tag
pullPolicy: Always
The above example assumes you have published a docker images at ``my-private-repo/sdcore-adapter:my-tag``.
My particular workflow is to deploy a local-docker registry and push my images to that.
Please do not publish ONF images to a public repository unless the image is intended to be public.
Several ONF repositories are private, and therefore their docker artifacts should also be private.
There are alternatives to using a private docker repository.
For example, if you are using kubeadm, then you may be able to simply tag the image locally.
If you’re using KinD, then you can push a local image to into the kind cluster::
kind load docker-image sdcore-adapter:my-tag
Developing using a custom onos-config
-------------------------------------
The onos-config helm chart is responsible for loading model plugins at runtime. You can override which
plugins it loads, and optionally override the image for onos-config as well. For example::
onos-config:
image:
tag: mytag
repository: mydockeraccount/onos-config
modelPlugins:
- name: aether-2
image: mydockeraccount/aether-2.0.x:mytag
endpoint: localhost
port: 5152
- name: aether-4
image: mydockeraccount/aether-4.x:mytag
endpoint: localhost
port: 5153
In the above example, the onos-config image will be pulled from `mydockeraccount`, and it will install
two plugins for v2 and v4 models, from that same docker account.
Inspecting logs
---------------
Most of the relevant Kubernetes pods are in the micro-onos namespace.
The names may change from deployment to deployment, so start by getting a list of pods::
kubectl -n micro-onos get pods
Then you can inspect a specific pod/container::
kubectl -n micro-onos logs deployment/sdcore-adapter-v2
.. _securing_roc:
Securing ROC
------------
keycloak-dev.onlab.us
^^^^^^^^^^^^^^^^^^^^^
Keycloak is an Open Source Identity and Access Management for Modern Applications and
Services. It can be used as an OIDC Issuer than can act as a front end to several authentication systems
e.g. LDAP, Crowd, Google, GitHub
When deploying ROC with the ``aether-roc-umbrella`` chart, secure mode can be enabled by
specifying an OpenID Connect (OIDC) issuer like::
helm -n micro-onos install aether-roc-umbrella aether/aether-roc-umbrella \
--set onos-config.openidc.issuer=https://keycloak-dev.onlab.us/auth/realms/master \
--set aether-roc-api.openidc.issuer=https://keycloak-dev.onlab.us/auth/realms/master \
--set aether-roc-gui-v2.openidc.issuer=https://keycloak-dev.onlab.us/auth/realms/master \
--set prom-label-proxy-acc.config.openidc.issuer=https://keycloak-dev.onlab.us/auth/realms/master \
--set prom-label-proxy-amp.config.openidc.issuer=https://keycloak-dev.onlab.us/auth/realms/master
The choice of OIDC issuer in this case is the **development** Keycloak server at https://keycloak-dev.onlab.us
Its LDAP server is populated with 7 different users in the 2 example enterprises - *starbucks* and *acme*.
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
| User | login | mixedGroup: | charactersGroup | AetherROCAdmin | EnterpriseAdmin | starbucks | acme |
+==================+==========+=============+=================+=================+=================+===========+======+
| Alice Admin | alicea | ✓ | | ✓ | | | |
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
| Bob Cratchit | bobc | ✓ | ✓ | | | | |
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
| Charlie Brown | charlieb | | ✓ | | | | |
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
| Daisy Duke | daisyd | | ✓ | | ✓ | ✓ | |
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
| Elmer Fudd | elmerf | | ✓ | | | ✓ | |
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
| Fred Flintstone | fredf | | ✓ | | ✓ | | ✓ |
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
| Gandalf The Grey | gandalfg | | ✓ | | | | ✓ |
+------------------+----------+-------------+-----------------+-----------------+-----------------+-----------+------+
.. note:: all users have the same password - please contact `aether-roc <https://onf-internal.slack.com/archives/C01S7BVC1FX>`_ slack group if you need it
.. note:: Because of the SSO feature of Keycloak you will need to explicitly logout of Keycloak to change users.
To login as 2 separate users at the same time, use a private browser window for one.
Running your own Keycloak Server
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It is also possible to run your own own Keycloak server inside of Kubernetes.
``keycloak-389-umbrella`` is a Helm chart that combines a Keycloak server with an LDAP
installation (389 Directory Server), and an LDAP administration tool. It can be deployed (with name ``k3u`` in to the
same cluster namespace as ``aether-roc-umbrella``::
helm -n micro-onos install k3u onosproject/keycloak-389-umbrella
To make the deployment available with the hostname ``k3u-keycloak`` requires:
#. a port forward like ``kubectl -n micro-onos port-forward service/k3u-keycloak --address=0.0.0.0 5557:80``
#. editing your ``/etc/hosts`` file (on the machine where your browser runs) so that the name ``k3u-keycloak`` points
to the IP address of the machine where the ``port-forward`` runs (usually ``localhost``).
When running it should be available at *http://k3u-keycloak:5557/auth/realms/master/.well-known/openid-configuration*.
.. note:: You can access the Keycloak management page from *http://k3u-keycloak:5557/auth/admin* but you must
login as `admin`. Because of the SSO feature of Keycloak this will affect your Aether ROC GUI login too.
To login as 2 separate users at the same time, use a private browser window for one.
.. note:: Services inside the cluster (e.g. onos-config) should set the issuer to *https://k3u-keycloak:80/auth/realms/master*
on port 80, while the aether-roc-gui should use port 5557
As any OIDC server can work with ROC you can alternately use ``dex-ldap-umbrella``
(`deprecated <https://github.com/onosproject/onos-helm-charts/tree/master/dex-ldap-umbrella>`_).
See `keycloak-389-umbrella <https://github.com/onosproject/onos-helm-charts/tree/master/keycloak-389-umbrella#readme>`_
for more details.
Production Environment
^^^^^^^^^^^^^^^^^^^^^^
In a production environment, the public Aether Keycloak (with its LDAP server populated with real Aether users and groups) should be used.
See `public keycloak <https://keycloak.opennetworking.org/auth/realms/master/.well-known/openid-configuration>`_ for more details.
.. note:: Your RBAC access to ROC will be limited by the groups you belong to in its LDAP store.
Role Based Access Control
^^^^^^^^^^^^^^^^^^^^^^^^^
When secured, access to the configuration in ROC is limited by the **groups** that a user belongs to.
* **AetherROCAdmin** - users in this group have full read **and** write access to all configuration.
* *<enterprise>* - users in a group the lowercase name of an enterprise, will have **read** access to that enterprise.
* **EnterpriseAdmin** - users in this group will have read **and** write access the enterprise they belong to.
For example in *keycloak-389-umbrella* the user *Daisy Duke* belongs to *starbucks* **and**
*EnterpriseAdmin* and so has read **and** write access to items linked with *starbucks* enterprise.
By comparison the user *Elmer Fudd* belongs only to *starbucks* group and so has only **read** access to items
linked with the *starbucks* enterprise.
Requests to a Secure System
^^^^^^^^^^^^^^^^^^^^^^^^^^^
When configuration is retrieved or updated through *aether-config*, a Bearer Token in the
form of a JSON Web Token (JWT) issued by the selected OIDC Issuer server must accompany
the request as an Authorization Header.
This applies to both the REST interface of ``aether-roc-api`` **and** the *gnmi* interface of
``aether-config``.
In the Aether ROC, a Bearer Token can be generated by logging in and selecting API Key from the
menu. This pops up a window with a copy button, where the key can be copied.
Alternatively with Keycloak a Token may be requested programmatically through the Keycloak API::
curl --location --request POST 'https://keycloak-dev.onlab.us/auth/realms/master/protocol/openid-connect/token' \
--header 'Content-Type: application/x-www-form-urlencoded' \
--data-urlencode 'grant_type=password' \
--data-urlencode 'client_id=aether-roc-gui' \
--data-urlencode 'username=alicea' \
--data-urlencode 'password=password' \
--data-urlencode 'scope=openid profile email groups' | jq "{access_token}"
The key will expire after 24 hours.
.. image:: images/aether-roc-gui-copy-api-key.png
:width: 580
:alt: Aether ROC GUI allows copying of API Key to clipboard
Accessing the REST interface from a tool like Postman, should include this Auth token.
.. image:: images/postman-auth-token.png
:width: 930
:alt: Postman showing Authentication Token pasted in
Logging
"""""""
The logs of *aether-config* will contain the **username** and **timestamp** of
any **gnmi** call when security is enabled.
.. image:: images/aether-config-log.png
:width: 887
:alt: aether-config log message showing username and timestamp
Accessing GUI from an external system
"""""""""""""""""""""""""""""""""""""
To access the ROC GUI from a computer outside the Cluster machine using *port-forwarding* then
it is necessary to:
* Ensure that all *port-forward*'s have **--address=0.0.0.0**
* Add to the IP address of the cluster machine to the **/etc/hosts** of the outside computer as::
<ip address of cluster> k3u-keycloak aether-roc-gui
* Verify that you can access the Keycloak server by its name *https://keycloak-dev.onlab.us/auth/realms/master/.well-known/openid-configuration*
* Access the GUI through the hostname (rather than ip address) ``http://aether-roc-gui:8183``
Troubleshooting Secure Access
"""""""""""""""""""""""""""""
While every effort has been made to ensure that securing Aether is simple and effective,
some difficulties may arise.
One of the most important steps is to validate that the OIDC Issuer (Keycloak server) can be reached
from the browser. The **well_known** URL should be available and show the important endpoints are correct.
.. image:: images/keycloak-389-umbrella-well-known.png
:width: 580
:alt: Keycloak Well Known page
If logged out of the Browser when accessing the Aether ROC GUI, accessing any page of the application should
redirect to the Keycloak login page.
.. image:: images/keycloak-ldap-login-page.png
:width: 493
:alt: Keycloak Login page
When logged in the User details can be seen by clicking the User's name in the drop down menu.
This shows the **groups** that the user belongs to, and can be used to debug RBAC issues.
.. image:: images/aether-roc-gui-user-details.png
:width: 700
:alt: User Details page
When you sign out of the ROC GUI, if you are not redirected to the Keycloak Login Page,
you should check the Developer Console of the browser. The console should show the correct
OIDC issuer (Keycloak server), and that Auth is enabled.
.. image:: images/aether-roc-gui-console-loggedin.png
:width: 418
:alt: Browser Console showing correct configuration
Keycloak installation issues
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The ``fedorea-389ds`` pod may restart a couple of times before it finally reaches running.
There are 2 post install jobs that take some time to start. Overall allow 3 minutes for startup.
Some users are finding that the Fedora pod will never reach a running state on resource
constrained machines. This issue is being investigated.
ROC Data Model Conventions and Requirements
-------------------------------------------
The MEGA-Patch described above will bring up a fully compliant sample data model.
However, it may be useful to bring up your own data model, customized to a different
site of sites. This subsection documents conventions and requirements for the Aether
modeling within the ROC.
The ROC models must be configured with the following:
* A default enterprise with the id `defaultent`.
* A default site with the id `defaultent-defaultsite`.
This site should be within the `defaultent` enterprise.
This site is used by ``subscriber-proxy`` to place detected SIM Cards that cannot
be matched to an existing site.
Some exercises to get familiar
------------------------------
1. Deploy the ROC and POST the mega-patch, go into the ``aether-roc-gui`` and click
through the Slice, DeviceGroup, and other objects to see that they were
created as expected.
2. Examine the log of the ``sdcore-adapter-v2`` container. It should be
attempting to push the mega-patch’s changes. If you don’t have a core
available, it may be failing the push, but you should see the attempts.
3. Change an object in the GUI. Watch the ``sdcore-adapter-v2`` log file and
see that the adapter attempts to push the change.
4. Try POSTing a change via the API. Observe the ``sdcore-adapter-v2`` log
file and see that the adapter attempts to push the change.
5. Deploy a 5G Aether-in-a-Box (See :doc:`Setting Up Aether-in-a-Box
<aiab>`), modify the mega-patch to specify the URL for the Aether-in-a-Box
``webui`` container, POST the mega-patch, and observe that the changes were
correctly pushed via the ``sdcore-adapter-v2`` into the ``sd-core``’s
``webui`` container (``webui`` container log will show configuration as it
is received)
.. |ROCGUI| image:: images/rocgui.png
:width: 945
:alt: ROC GUI showing list of Slices