templates/instance.inf.j2 - ansible/role/ds389 - Gitiles

 {#
 SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org>
 SPDX-License-Identifier: Apache-2.0
 #}

 ;
 ; This is a version 2 ds setup inf file.
 ; It is used by the python versions of setup-ds-*
 ; Most options map 1 to 1 to the original .inf file.
 ; However, there are some differences that I envision
 ; For example, note the split backend section.
 ; You should be able to create, one, many or no backends in an install
 ;
 ; The special value {instance_name} is substituted at installation time.
 ;
 ; By default, all configuration parameters in this file are commented out.
 ; To use an INF file with dscreate, you must at least set the parameters
 ; flagged with [REQUIRED].


 [general]
 # defaults (str)
 # Description: Directory Server enables administrators to use the default values for cn=config entries from a specific version. If you set this parameter to "999999999", which is the default, the instance always uses the default values of the latest version. For example, to configure that the instance uses default values from version 1.3.5, set this parameter to "001003005". The format of this value is XXXYYYZZZ, where X is the major version, Y the minor version, and Z the patch level. Note that each part of the value uses 3 digits and must be filled with leading zeros if necessary.
 # Default value: 999999999
 defaults = 999999999

 # full_machine_name (str)
 # Description: Sets the fully qualified hostname (FQDN) of this system. When installing this instance with GSSAPI authentication behind a load balancer, set this parameter to the FQDN of the load balancer and, additionally, set "strict_host_checking" to "false".
 # Default value: debian-11-priv
 full_machine_name = {{ ds389_machine_name }}

 # start (bool)
 # Description: Starts the instance after the install completes. If false, the instance is created but started.
 # Default value: True
 start = True

 # strict_host_checking (bool)
 # Description: Sets whether the server verifies the forward and reverse record set in the "full_machine_name" parameter. When installing this instance with GSSAPI authentication behind a load balancer, set this parameter to "false". Container installs imply "false".
 # Default value: False
 ;strict_host_checking = False


 [slapd]
 # instance_name (str)
 # Description: Sets the name of the instance. You can refer to this value in other parameters of this INF file using the "{instance_name}" variable. Note that this name cannot be changed after the installation!
 # Default value: localhost
 instance_name = {{ ds389_instance_name }}

 # port (int)
 # Description: Sets the TCP port the instance uses for LDAP connections.
 # Default value: 389
 ;port = 389

 # root_password (str)
 # Description: Sets the password of the "cn=Directory Manager" account ("root_dn" parameter).You can either set this parameter to a plain text password dscreate hashes during the installation or to a "{algorithm}hash" string generated by the pwdhash utility. The password must be at least 8 characters long.  Note that setting a plain text password can be a security risk if unprivileged users can read this INF file!
 # Default value: Directory_Manager_Password
 root_password = {{ ds389_root_password }}

 # secure_port (int)
 # Description: Sets the TCP port the instance uses for TLS-secured LDAP connections (LDAPS).
 # Default value: 636
 ;secure_port = 636

 # self_sign_cert (bool)
 # Description: Sets whether the setup creates a self-signed certificate and enables TLS encryption during the installation. The certificate is not suitable for production, but it enables administrators to use TLS right after the installation. You can replace the self-signed certificate with a certificate issued by a Certificate Authority. If set to False, you can enable TLS later by importing a CA/Certificate and enabling 'dsconf <instance_name> config replace nsslapd-security=on'
 # Default value: True
 self_sign_cert = {{ ds389_self_sign_cert }}

 # self_sign_cert_valid_months (int)
 # Description: Set the number of months the issued self-signed certificate will be valid.
 # Default value: 24
 ;self_sign_cert_valid_months = 24


 [backend-userroot]
 # create_suffix_entry (bool)
 # Description: Set this parameter to "True" to create a generic root node entry for the suffix in the database.
 # Default value: False
 ;create_suffix_entry = False

 # require_index (bool)
 # Description: Set this parameter to "True" to refuse unindexed searches in this database.
 # Default value: False
 ;require_index = False

 # sample_entries (str)
 # Description: Set this parameter to 'yes' to add latest version of sample entries to this database.  Or, use '001003006' to use the 1.3.6 version sample entries.  Use this option, for example, to create a database for testing purposes.
 # Default value: no
 ;sample_entries = no

 # suffix (str)
 # Description: Sets the root suffix stored in this database.  If you do not uncomment and set the suffix attribute the install process will NOT create the backend/suffix.  You can also create multiple backends/suffixes by duplicating this section.
 # Default value:
 suffix = {{ ds389_suffix }}
	{#
	SPDX-FileCopyrightText: © 2020 Open Networking Foundation <support@opennetworking.org>
	SPDX-License-Identifier: Apache-2.0
	#}

	;
	; This is a version 2 ds setup inf file.
	; It is used by the python versions of setup-ds-*
	; Most options map 1 to 1 to the original .inf file.
	; However, there are some differences that I envision
	; For example, note the split backend section.
	; You should be able to create, one, many or no backends in an install
	;
	; The special value {instance_name} is substituted at installation time.
	;
	; By default, all configuration parameters in this file are commented out.
	; To use an INF file with dscreate, you must at least set the parameters
	; flagged with [REQUIRED].


	[general]
	# defaults (str)
	# Description: Directory Server enables administrators to use the default values for cn=config entries from a specific version. If you set this parameter to "999999999", which is the default, the instance always uses the default values of the latest version. For example, to configure that the instance uses default values from version 1.3.5, set this parameter to "001003005". The format of this value is XXXYYYZZZ, where X is the major version, Y the minor version, and Z the patch level. Note that each part of the value uses 3 digits and must be filled with leading zeros if necessary.
	# Default value: 999999999
	defaults = 999999999

	# full_machine_name (str)
	# Description: Sets the fully qualified hostname (FQDN) of this system. When installing this instance with GSSAPI authentication behind a load balancer, set this parameter to the FQDN of the load balancer and, additionally, set "strict_host_checking" to "false".
	# Default value: debian-11-priv
	full_machine_name = {{ ds389_machine_name }}

	# start (bool)
	# Description: Starts the instance after the install completes. If false, the instance is created but started.
	# Default value: True
	start = True

	# strict_host_checking (bool)
	# Description: Sets whether the server verifies the forward and reverse record set in the "full_machine_name" parameter. When installing this instance with GSSAPI authentication behind a load balancer, set this parameter to "false". Container installs imply "false".
	# Default value: False
	;strict_host_checking = False


	[slapd]
	# instance_name (str)
	# Description: Sets the name of the instance. You can refer to this value in other parameters of this INF file using the "{instance_name}" variable. Note that this name cannot be changed after the installation!
	# Default value: localhost
	instance_name = {{ ds389_instance_name }}

	# port (int)
	# Description: Sets the TCP port the instance uses for LDAP connections.
	# Default value: 389
	;port = 389

	# root_password (str)
	# Description: Sets the password of the "cn=Directory Manager" account ("root_dn" parameter).You can either set this parameter to a plain text password dscreate hashes during the installation or to a "{algorithm}hash" string generated by the pwdhash utility. The password must be at least 8 characters long. Note that setting a plain text password can be a security risk if unprivileged users can read this INF file!
	# Default value: Directory_Manager_Password
	root_password = {{ ds389_root_password }}

	# secure_port (int)
	# Description: Sets the TCP port the instance uses for TLS-secured LDAP connections (LDAPS).
	# Default value: 636
	;secure_port = 636

	# self_sign_cert (bool)
	# Description: Sets whether the setup creates a self-signed certificate and enables TLS encryption during the installation. The certificate is not suitable for production, but it enables administrators to use TLS right after the installation. You can replace the self-signed certificate with a certificate issued by a Certificate Authority. If set to False, you can enable TLS later by importing a CA/Certificate and enabling 'dsconf <instance_name> config replace nsslapd-security=on'
	# Default value: True
	self_sign_cert = {{ ds389_self_sign_cert }}

	# self_sign_cert_valid_months (int)
	# Description: Set the number of months the issued self-signed certificate will be valid.
	# Default value: 24
	;self_sign_cert_valid_months = 24


	[backend-userroot]
	# create_suffix_entry (bool)
	# Description: Set this parameter to "True" to create a generic root node entry for the suffix in the database.
	# Default value: False
	;create_suffix_entry = False

	# require_index (bool)
	# Description: Set this parameter to "True" to refuse unindexed searches in this database.
	# Default value: False
	;require_index = False

	# sample_entries (str)
	# Description: Set this parameter to 'yes' to add latest version of sample entries to this database. Or, use '001003006' to use the 1.3.6 version sample entries. Use this option, for example, to create a database for testing purposes.
	# Default value: no
	;sample_entries = no

	# suffix (str)
	# Description: Sets the root suffix stored in this database. If you do not uncomment and set the suffix attribute the install process will NOT create the backend/suffix. You can also create multiple backends/suffixes by duplicating this section.
	# Default value:
	suffix = {{ ds389_suffix }}