scripts/asfvolt-driver-build.sh - asfvolt16-driver - Gitiles

 #
 # Copyright 2017-present Open Networking Foundation
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 # http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
 #
 # Run from OpenNetworkLinux top directory
 #
 #cd /aux/OpenNetworkLinux
 set -e
 ASFVOLT_REPO_NAME=asfvolt16-driver
 : ${MAKE_JOBS:=4}

 # override shell variables to match custom local build environment
 : ${ONL_TOPDIR:=`pwd`}
 : ${BALSRC_RELEASE=bal_src_release}
 : ${VOLTHA_TOPDIR:=${HOME}/voltha/incubator/voltha}
 : ${BALSRC_TOPDIR:=${ONL_TOPDIR}/${BALSRC_RELEASE}/bal_release}
 : ${ASFSRC_TOPDIR:=${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}/src}
 : ${DEVSIM_TOPDIR:=${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}/device_simulator}
 : ${PATCHF_TOPDIR:=${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}/patches}

 echo ONL_TOPDIR=${ONL_TOPDIR}
 echo MAKE_JOBS=${MAKE_JOBS}
 echo BALSRC_RELEASE=${BALSRC_RELEASE}
 echo VOLTHA_TOPDIR=${VOLTHA_TOPDIR}
 echo BALSRC_TOPDIR=${BALSRC_TOPDIR}
 echo ASFSRC_TOPDIR=${ASFSRC_TOPDIR}
 echo DEVSIM_TOPDIR=${DEVSIM_TOPDIR}
 echo PATCHF_TOPDIR=${PATCHF_TOPDIR}

 # archived ZIP files from "https://github.com/opennetworkinglab/asfvolt16-driver/tree/master/third_party"
 GRPC_ARCH=ed7d06af3eef1c27f10328c73b3ae3ab10d72b10
 GRPC_C_ARCH=be82ab1605717f33e2e0d3038996ea46d9efe25e
 PROTOBUF_ARCH=703cd8e11c8d34283d4c8bf869c61866e8211c9d
 PROTOBUF_C_ARCH=6a4f9a9a67c06769aaa9f65e8f89a56483271f5a

 # Note: removes existing directories: grpc, protobuf
 rm -rf grpc protobuf grpc-* protobuf-*

 #Clone asfvolt16-driver
 #    - The guide assumes that the asfvolt16-driver gerrit repo is cloned under the ONL toplevel directory:
 #    - git clone ssh://user@gerrit.opencord.org:29418/asfvolt16-driver ${HOME}/OpenNetworkLinux/asfvolt16-driver

 #git clone https://gerrit.opencord.org/${ASFVOLT_REPO_NAME} ${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}

 #steps to install grpc
 #   - Download as zip "grpc", "grpc-c", "protobuf" and "protobuf-c" from "https://github.com/opennetworkinglab/asfvolt16-driver/tree/master/third_party"
 wget https://github.com/grpc/grpc/archive/${GRPC_ARCH}.zip
 wget https://github.com/Juniper/grpc-c/archive/${GRPC_C_ARCH}.zip
 wget https://github.com/google/protobuf/archive/${PROTOBUF_ARCH}.zip
 wget https://github.com/shadansari/protobuf-c/archive/${PROTOBUF_C_ARCH}.zip

 #   - extract grpc at ${HOME}/OpenNetworkLinux/grpc
 unzip -q ${GRPC_ARCH}.zip; rm ${GRPC_ARCH}.zip
 mv grpc-${GRPC_ARCH} grpc

 #   - extract grpc-c at ${HOME}/OpenNetworkLinux/grpc-c
 unzip -q ${GRPC_C_ARCH}.zip; rm ${GRPC_C_ARCH}.zip
 mv grpc-c-${GRPC_C_ARCH} grpc-c

 #   - extract protobuf at ${HOME}/OpenNetworkLinux/grpc/thirdparty/protobuf
 unzip -q ${PROTOBUF_ARCH}.zip; rm ${PROTOBUF_ARCH}.zip
 mkdir -p grpc/thirdparty
 mv protobuf-${PROTOBUF_ARCH} grpc/thirdparty/protobuf


 #   - extract protobuf-c folder at ${HOME}/OpenNetworkLinux/grpc-c/third_party/protobuf-c
 unzip -q ${PROTOBUF_C_ARCH}.zip; rm ${PROTOBUF_C_ARCH}.zip
 (cd protobuf-c-${PROTOBUF_C_ARCH};tar cf - .)|(cd grpc-c/third_party/protobuf-c;tar xf -)
 rm -rf protobuf-c-${PROTOBUF_C_ARCH}

 #steps to install grpc-c
 # cd ${HOME}/OpenNetworkLinux/grpc/thirdparty/protobuf
 #  - ./autogen.sh
 #  - ./configure
 #  - make
 #  - sudo make install
 cd ${ONL_TOPDIR}/grpc/thirdparty/protobuf
 ./autogen.sh
 ./configure
 make --jobs=${MAKE_JOBS}
 sudo make install

 # cd ${HOME}/OpenNetworkLinux/grpc
 # - export LD_LIBRARY_PATH=/usr/local/lib
 # - make
 # - sudo make install

 cd ${ONL_TOPDIR}/grpc
 export LD_LIBRARY_PATH=/usr/local/lib
 make --jobs=${MAKE_JOBS}
 sudo make install

 #cd ${HOME}/OpenNetworkLinux/grpc-c/third_party/protobuf-c
 #- ./autogen.sh
 #- ./configure
 #- export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/protobuf
 #- make
 #- sudo make install

 cd ${ONL_TOPDIR}/grpc-c/third_party/protobuf-c
 ./autogen.sh
 ./configure
 export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/protobuf
 make --jobs=${MAKE_JOBS}
 sudo make install

 #Apply grpc-c patch
 #   - cd ${HOME}/OpenNetworkLinux/grpc-c/
 cd ${ONL_TOPDIR}/grpc-c
 #     Patch 1:
 #     Apply patch in following link for grpc-c/lib - "https://github.com/Juniper/grpc-c/commit/353b40cd920cd749ed6cf71f8df17f1d5cf2c89d"
 #     Note:
 #        (This patch is having very few changes in two files(grpc-c/lib/client.c, grpc-c/lib/service.c.
 #         Download these two files from above link and replace at grpc-c/lib or merge these changes manually.)
 patch -p1 -i ${PATCHF_TOPDIR}/grpc-c_compile-error.patch

 #     Patch 2:
 #     Apply patch in service.c.patch and client.c.patch
 patch -p1 -i ${PATCHF_TOPDIR}/grpc-c_asfvolt16.patch

 #
 #     - cd ${HOME}/OpenNetworkLinux
 #     - cp asfvolt16-driver/device_simulator/Makefile.am grpc-c/examples/
 #     - cp asfvolt16-driver/device_simulator/voltha_bal_driver.c grpc-c/examples/
 #     - cp asfvolt16-driver/device_simulator/bal_stub.c grpc-c/examples/
 #     - cp asfvolt16-driver/device_simulator/bal_stub.h grpc-c/examples/
 #         - Note: Update voltha adaptor IP in bal_stub.c (Is this required? Not clear which variable needs to be updated).
 cd ${ONL_TOPDIR}
 cp ${DEVSIM_TOPDIR}/Makefile.am grpc-c/examples/
 cp ${DEVSIM_TOPDIR}/voltha_bal_driver.c grpc-c/examples/
 cp ${DEVSIM_TOPDIR}/bal_stub.c grpc-c/examples/
 cp ${DEVSIM_TOPDIR}/bal_stub.h grpc-c/examples/

 #
 #     - cd ${HOME}/OpenNetworkLinux/grpc-c
 #     - autoreconf --install
 #     - mkdir build && cd build
 #     - ../configure
 #     - make
 #     - sudo make install
 cd ${ONL_TOPDIR}/grpc-c
 autoreconf --install
 mkdir build && cd build
 ../configure
 make --jobs=${MAKE_JOBS}
 sudo make install

 #To obtain proto files - Have a repo sync of opencord voltha code base:
 #     - git clone https://github.com/opencord/voltha.git ${HOME}/voltha
 #     - cd ${HOME}/OpenNetworkLinux/grpc-c/
 #     - cp ${HOME}/voltha/voltha/adapters/asfvolt16_olt/protos/* examples/
 #
 cd ${ONL_TOPDIR}/grpc-c
 cp ${VOLTHA_TOPDIR}/voltha/adapters/asfvolt16_olt/protos/* examples

 #To autogenerate code from proto files:
 #     - cd ${HOME}/OpenNetworkLinux/grpc-c/build/examples
 #     - make autogen
 cd ${ONL_TOPDIR}/grpc-c/build/examples
 make autogen

 #
 #Build voltha_bal_driver:
 #     - cd ${HOME}/OpenNetworkLinux/grpc-c/build/examples
 #     - Note: Remove "-O2" from Makefile
 #     - Note: Set EDGECORE and BRCM_PATH in Makefile
 cd ${ONL_TOPDIR}/grpc-c/build/examples
 sed -i -e 's/-O2/-O0/g' \
        -e "s:^EDGECORE = /home/asfvolt/shared.*:#&\nEDGECORE = ${ASFSRC_TOPDIR}:" \
        -e "s:^BRCM_PATH = /home/asfvolt/shared.*:#&\nBRCM_PATH = ${BALSRC_TOPDIR}:" \
         Makefile

 pushd ${ASFSRC_TOPDIR}
 sed -i -e "s:^BRDCM_SRC=/home/asfvolt/shared.*:#&\nBRDCM_SRC = ${BALSRC_TOPDIR}:" \
        -e "s:^GRPC_C_PATH= /home/asfvolt/shared.*:#&\nGRPC_C_PATH = ${ONL_TOPDIR}/grpc-c:" \
         Makefile
 popd
 #```
 #       EDGECORE = ${HOME}/OpenNetworkLinux/asfvolt16-driver/src/
 #       BRCM_PATH = ${HOME}/OpenNetworkLinux/bal_src_release/bal_release
 #```
 #     - make clean_all;make
 make clean_all
 make
 #
 #The ultimate executable voltha_bal_driver can be found under ~/grpc-c/build/examples/.libs/

 echo "${ASFVOLT_REPO_NAME} build complete"
	#
	# Copyright 2017-present Open Networking Foundation
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	#
	# Run from OpenNetworkLinux top directory
	#
	#cd /aux/OpenNetworkLinux
	set -e
	ASFVOLT_REPO_NAME=asfvolt16-driver
	: ${MAKE_JOBS:=4}

	# override shell variables to match custom local build environment
	: ${ONL_TOPDIR:=`pwd`}
	: ${BALSRC_RELEASE=bal_src_release}
	: ${VOLTHA_TOPDIR:=${HOME}/voltha/incubator/voltha}
	: ${BALSRC_TOPDIR:=${ONL_TOPDIR}/${BALSRC_RELEASE}/bal_release}
	: ${ASFSRC_TOPDIR:=${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}/src}
	: ${DEVSIM_TOPDIR:=${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}/device_simulator}
	: ${PATCHF_TOPDIR:=${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}/patches}

	echo ONL_TOPDIR=${ONL_TOPDIR}
	echo MAKE_JOBS=${MAKE_JOBS}
	echo BALSRC_RELEASE=${BALSRC_RELEASE}
	echo VOLTHA_TOPDIR=${VOLTHA_TOPDIR}
	echo BALSRC_TOPDIR=${BALSRC_TOPDIR}
	echo ASFSRC_TOPDIR=${ASFSRC_TOPDIR}
	echo DEVSIM_TOPDIR=${DEVSIM_TOPDIR}
	echo PATCHF_TOPDIR=${PATCHF_TOPDIR}

	# archived ZIP files from "https://github.com/opennetworkinglab/asfvolt16-driver/tree/master/third_party"
	GRPC_ARCH=ed7d06af3eef1c27f10328c73b3ae3ab10d72b10
	GRPC_C_ARCH=be82ab1605717f33e2e0d3038996ea46d9efe25e
	PROTOBUF_ARCH=703cd8e11c8d34283d4c8bf869c61866e8211c9d
	PROTOBUF_C_ARCH=6a4f9a9a67c06769aaa9f65e8f89a56483271f5a

	# Note: removes existing directories: grpc, protobuf
	rm -rf grpc protobuf grpc-* protobuf-*

	#Clone asfvolt16-driver
	# - The guide assumes that the asfvolt16-driver gerrit repo is cloned under the ONL toplevel directory:
	# - git clone ssh://user@gerrit.opencord.org:29418/asfvolt16-driver ${HOME}/OpenNetworkLinux/asfvolt16-driver

	#git clone https://gerrit.opencord.org/${ASFVOLT_REPO_NAME} ${ONL_TOPDIR}/${ASFVOLT_REPO_NAME}

	#steps to install grpc
	# - Download as zip "grpc", "grpc-c", "protobuf" and "protobuf-c" from "https://github.com/opennetworkinglab/asfvolt16-driver/tree/master/third_party"
	wget https://github.com/grpc/grpc/archive/${GRPC_ARCH}.zip
	wget https://github.com/Juniper/grpc-c/archive/${GRPC_C_ARCH}.zip
	wget https://github.com/google/protobuf/archive/${PROTOBUF_ARCH}.zip
	wget https://github.com/shadansari/protobuf-c/archive/${PROTOBUF_C_ARCH}.zip

	# - extract grpc at ${HOME}/OpenNetworkLinux/grpc
	unzip -q ${GRPC_ARCH}.zip; rm ${GRPC_ARCH}.zip
	mv grpc-${GRPC_ARCH} grpc

	# - extract grpc-c at ${HOME}/OpenNetworkLinux/grpc-c
	unzip -q ${GRPC_C_ARCH}.zip; rm ${GRPC_C_ARCH}.zip
	mv grpc-c-${GRPC_C_ARCH} grpc-c

	# - extract protobuf at ${HOME}/OpenNetworkLinux/grpc/thirdparty/protobuf
	unzip -q ${PROTOBUF_ARCH}.zip; rm ${PROTOBUF_ARCH}.zip
	mkdir -p grpc/thirdparty
	mv protobuf-${PROTOBUF_ARCH} grpc/thirdparty/protobuf


	# - extract protobuf-c folder at ${HOME}/OpenNetworkLinux/grpc-c/third_party/protobuf-c
	unzip -q ${PROTOBUF_C_ARCH}.zip; rm ${PROTOBUF_C_ARCH}.zip
	(cd protobuf-c-${PROTOBUF_C_ARCH};tar cf - .)\|(cd grpc-c/third_party/protobuf-c;tar xf -)
	rm -rf protobuf-c-${PROTOBUF_C_ARCH}

	#steps to install grpc-c
	# cd ${HOME}/OpenNetworkLinux/grpc/thirdparty/protobuf
	# - ./autogen.sh
	# - ./configure
	# - make
	# - sudo make install
	cd ${ONL_TOPDIR}/grpc/thirdparty/protobuf
	./autogen.sh
	./configure
	make --jobs=${MAKE_JOBS}
	sudo make install

	# cd ${HOME}/OpenNetworkLinux/grpc
	# - export LD_LIBRARY_PATH=/usr/local/lib
	# - make
	# - sudo make install

	cd ${ONL_TOPDIR}/grpc
	export LD_LIBRARY_PATH=/usr/local/lib
	make --jobs=${MAKE_JOBS}
	sudo make install

	#cd ${HOME}/OpenNetworkLinux/grpc-c/third_party/protobuf-c
	#- ./autogen.sh
	#- ./configure
	#- export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/protobuf
	#- make
	#- sudo make install

	cd ${ONL_TOPDIR}/grpc-c/third_party/protobuf-c
	./autogen.sh
	./configure
	export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/protobuf
	make --jobs=${MAKE_JOBS}
	sudo make install

	#Apply grpc-c patch
	# - cd ${HOME}/OpenNetworkLinux/grpc-c/
	cd ${ONL_TOPDIR}/grpc-c
	# Patch 1:
	# Apply patch in following link for grpc-c/lib - "https://github.com/Juniper/grpc-c/commit/353b40cd920cd749ed6cf71f8df17f1d5cf2c89d"
	# Note:
	# (This patch is having very few changes in two files(grpc-c/lib/client.c, grpc-c/lib/service.c.
	# Download these two files from above link and replace at grpc-c/lib or merge these changes manually.)
	patch -p1 -i ${PATCHF_TOPDIR}/grpc-c_compile-error.patch

	# Patch 2:
	# Apply patch in service.c.patch and client.c.patch
	patch -p1 -i ${PATCHF_TOPDIR}/grpc-c_asfvolt16.patch

	#
	# - cd ${HOME}/OpenNetworkLinux
	# - cp asfvolt16-driver/device_simulator/Makefile.am grpc-c/examples/
	# - cp asfvolt16-driver/device_simulator/voltha_bal_driver.c grpc-c/examples/
	# - cp asfvolt16-driver/device_simulator/bal_stub.c grpc-c/examples/
	# - cp asfvolt16-driver/device_simulator/bal_stub.h grpc-c/examples/
	# - Note: Update voltha adaptor IP in bal_stub.c (Is this required? Not clear which variable needs to be updated).
	cd ${ONL_TOPDIR}
	cp ${DEVSIM_TOPDIR}/Makefile.am grpc-c/examples/
	cp ${DEVSIM_TOPDIR}/voltha_bal_driver.c grpc-c/examples/
	cp ${DEVSIM_TOPDIR}/bal_stub.c grpc-c/examples/
	cp ${DEVSIM_TOPDIR}/bal_stub.h grpc-c/examples/

	#
	# - cd ${HOME}/OpenNetworkLinux/grpc-c
	# - autoreconf --install
	# - mkdir build && cd build
	# - ../configure
	# - make
	# - sudo make install
	cd ${ONL_TOPDIR}/grpc-c
	autoreconf --install
	mkdir build && cd build
	../configure
	make --jobs=${MAKE_JOBS}
	sudo make install

	#To obtain proto files - Have a repo sync of opencord voltha code base:
	# - git clone https://github.com/opencord/voltha.git ${HOME}/voltha
	# - cd ${HOME}/OpenNetworkLinux/grpc-c/
	# - cp ${HOME}/voltha/voltha/adapters/asfvolt16_olt/protos/* examples/
	#
	cd ${ONL_TOPDIR}/grpc-c
	cp ${VOLTHA_TOPDIR}/voltha/adapters/asfvolt16_olt/protos/* examples

	#To autogenerate code from proto files:
	# - cd ${HOME}/OpenNetworkLinux/grpc-c/build/examples
	# - make autogen
	cd ${ONL_TOPDIR}/grpc-c/build/examples
	make autogen

	#
	#Build voltha_bal_driver:
	# - cd ${HOME}/OpenNetworkLinux/grpc-c/build/examples
	# - Note: Remove "-O2" from Makefile
	# - Note: Set EDGECORE and BRCM_PATH in Makefile
	cd ${ONL_TOPDIR}/grpc-c/build/examples
	sed -i -e 's/-O2/-O0/g' \
	-e "s:^EDGECORE = /home/asfvolt/shared.*:#&\nEDGECORE = ${ASFSRC_TOPDIR}:" \
	-e "s:^BRCM_PATH = /home/asfvolt/shared.*:#&\nBRCM_PATH = ${BALSRC_TOPDIR}:" \
	Makefile

	pushd ${ASFSRC_TOPDIR}
	sed -i -e "s:^BRDCM_SRC=/home/asfvolt/shared.*:#&\nBRDCM_SRC = ${BALSRC_TOPDIR}:" \
	-e "s:^GRPC_C_PATH= /home/asfvolt/shared.*:#&\nGRPC_C_PATH = ${ONL_TOPDIR}/grpc-c:" \
	Makefile
	popd
	#```
	# EDGECORE = ${HOME}/OpenNetworkLinux/asfvolt16-driver/src/
	# BRCM_PATH = ${HOME}/OpenNetworkLinux/bal_src_release/bal_release
	#```
	# - make clean_all;make
	make clean_all
	make
	#
	#The ultimate executable voltha_bal_driver can be found under ~/grpc-c/build/examples/.libs/

	echo "${ASFVOLT_REPO_NAME} build complete"