blob: a98d619164510088ba2d992f1c207cd560bf8ee2 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// Ieee8021PMapperServiceProfileClassID is the 16-bit ID for the OMCI
// Managed entity IEEE 802.1p mapper service profile
const Ieee8021PMapperServiceProfileClassID ClassID = ClassID(130)
var ieee8021pmapperserviceprofileBME *ManagedEntityDefinition
// Ieee8021PMapperServiceProfile (class ID #130)
// This ME associates the priorities of IEEE 802.1p [IEEE 802.1D] priority tagged frames with
// specific connections. This ME directs upstream traffic to the designated GEM ports. Downstream
// traffic arriving on any of the IEEE 802.1p mapper's GEM ports is directed to the mapper's root
// TP. Other mechanisms exist to direct downstream traffic, specifically a direct pointer to a
// downstream queue from the GEM port network CTP. If such an alternative is used, it should be
// provisioned to be consistent with the flow model of the mapper.
//
// Instances of this ME are created and deleted by the OLT.
//
// Relationships
// At its root, an instance of this ME may be associated with zero or one instance of a PPTP UNI,
// MAC bridge port configuration data, or any type of IW TP ME that carries IEEE 802 traffic. Each
// of its eight branches is associated with zero or one GEM IW TP.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
// (mandatory) (2-bytes)
//
// Tp Pointer
// (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 0
// Interwork TP pointer for P-bit priority 0: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 1
// Interwork TP pointer for P-bit priority 1: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 2
// Interwork TP pointer for P-bit priority 2: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 3
// Interwork TP pointer for P-bit priority 3: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 4
// Interwork TP pointer for P-bit priority 4: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 5
// Interwork TP pointer for P-bit priority 5: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 6
// Interwork TP pointer for P-bit priority 6: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Interwork Tp Pointer For P_Bit Priority 7
// Interwork TP pointer for P-bit priority 7: (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Unmarked Frame Option
// Untagged downstream frames are passed through the mapper transparently.
//
// Dscp To P Bit Mapping
// NOTE - If certain bits in the DSCP field are to be ignored in the mapping process, the attribute
// should be provisioned such that all possible values of those bits produce the same P-bit
// mapping. This can be applied to the case where instead of full DSCP, the operator wishes to
// adopt the priority mechanism based on IP precedence, which needs only the three MSBs of the DSCP
// field.
//
// Default P Bit Assumption
// Default P-bit assumption: This attribute is valid when the unmarked frame option attribute is
// set to 1. In its LSBs, the default Pbit assumption attribute contains the default PCP field to
// be assumed. The unmodified frame is then directed to the GEM IW TP indicated by the interwork TP
// pointer mappings. (R,-W, setbycreate) (mandatory) (1-byte)
//
// Tp Type
// (R,-W, setbycreate) (optional) (1-byte)
//
type Ieee8021PMapperServiceProfile struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
ieee8021pmapperserviceprofileBME = &ManagedEntityDefinition{
Name: "Ieee8021PMapperServiceProfile",
ClassID: 130,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0xfff8,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
1: Uint16Field("TpPointer", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
2: Uint16Field("InterworkTpPointerForPBitPriority0", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
3: Uint16Field("InterworkTpPointerForPBitPriority1", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
4: Uint16Field("InterworkTpPointerForPBitPriority2", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
5: Uint16Field("InterworkTpPointerForPBitPriority3", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
6: Uint16Field("InterworkTpPointerForPBitPriority4", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
7: Uint16Field("InterworkTpPointerForPBitPriority5", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
8: Uint16Field("InterworkTpPointerForPBitPriority6", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
9: Uint16Field("InterworkTpPointerForPBitPriority7", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
10: ByteField("UnmarkedFrameOption", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
11: MultiByteField("DscpToPBitMapping", OctetsAttributeType, 0x0020, 24, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"), mapset.NewSetWith(Read, Write), false, false, false, 11),
12: ByteField("DefaultPBitAssumption", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
13: ByteField("TpType", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13),
},
Access: CreatedByOlt,
Support: UnknownSupport,
}
}
// NewIeee8021PMapperServiceProfile (class ID 130) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewIeee8021PMapperServiceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*ieee8021pmapperserviceprofileBME, params...)
}