blob: da0180fa67a7ac3a860a40b287a880c6264f4d2a [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// OnuDynamicPowerManagementControlClassID is the 16-bit ID for the OMCI
// Managed entity ONU dynamic power management control
const OnuDynamicPowerManagementControlClassID ClassID = ClassID(336)
var onudynamicpowermanagementcontrolBME *ManagedEntityDefinition
// OnuDynamicPowerManagementControl (class ID #336)
// This ME models the ONU's ability to enter power conservation modes in cooperation with the OLT
// in an ITU-T G.987 system. [ITUT G.987.3] originally specified two alternative modes, doze and
// cyclic sleep. The subsequent revision of [ITUT G.987.3] simplified the specification providing a
// single power conservation mode, watchful sleep.
//
// An ONU that supports power conservation modes automatically creates an instance of this ME.
//
// Relationships
// One instance of this ME is associated with the ONU ME.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. There is only
// one instance, number 0. (R) (mandatory) (2-bytes)
//
// Power Reduction Management Capability
// 5..255 Reserved
//
// Power Reduction Management Mode
// Power reduction management mode: This attribute enables one or more of the ONU's managed power
// conservation modes. It is a bit map in which the bit value 0 disables the mode, while the value
// 1 enables the mode. Bit assignments are the same as those of the power reduction management
// capability attribute. The default value of each bit is 0. (R,-W) (mandatory) (1-byte)
//
// Itransinit
// Itransinit: This attribute is the ONU vendor's statement of the complete transceiver
// initialization time: the worst-case time required for the ONU to regain full functionality when
// leaving the asleep state in cyclic sleep mode or low-power state in watchful sleep mode (i.e.,
// turning on both the receiver and the transmitter and acquiring synchronization to the downstream
// flow), measured in units of 125-us frames. The value zero indicates that the sleeping ONU can
// respond to a bandwidth grant without delay. (R) (mandatory) (2-bytes)
//
// Itxinit
// Itxinit: This attribute is the ONU vendor's statement of the transmitter initialization time:
// the time required for the ONU to regain full functionality when leaving the listen state (i.e.,
// turning on the transmitter), measured in units of 125-us frames. The value zero indicates that
// the dozing ONU can respond to a bandwidth grant without delay. If watchful sleep is enabled, the
// ONU ignores this attribute. (R) (mandatory) (2 bytes)
//
// Maximum Sleep Interval
// Maximum sleep interval: The Isleep/Ilowpower attribute specifies the maximum time the ONU spends
// in its asleep, listen, or low-power states, as a count of 125-us frames. Local or remote events
// may truncate the ONU's sojourn in these states. The default value of this attribute is 0. (R,-W)
// (mandatory) (4-bytes)
//
// Maximum Receiver_Off Interval
// Maximum receiver-off interval: The Irxoff attribute specifies the maximum time the OLT can
// afford to wait from the moment it decides to wake up an ONU in the low-power state of the
// watchful sleep mode until the ONU is fully operational, specified as a count of 125-us frames.
// (R,-W) (mandatory) (4-bytes)
//
// Minimum Aware Interval
// Minimum aware interval: The Iaware attribute specifies the time the ONU spends in its aware
// state, as a count of 125-us frames, before it re-enters asleep or listen states. Local or remote
// events may independently cause the ONU to enter an active state rather than returning to a sleep
// state. The default value of this attribute is 0. (R,-W) (mandatory) (4-bytes)
//
// Minimum Active Held Interval
// Minimum active held interval: The Ihold attribute specifies the minimum time during which the
// ONU remains in the active held state, as a count of 125-us frames. Its initial value is zero.
// (R, W) (mandatory) (2-bytes)
//
// Maximum Sleep Interval Extension
// (R,-W) (optional) (8-bytes)
//
// Ethernet Passive Optical Network Epon Capability Extension
// - Configurations: ackEnable configuration = enable, Sleep indication configuration = disable,
// Early wake-up configuration = enable
//
// Epon Setup Extension
// (R,-W) (optional) (1-byte)
//
// Missing Consecutive Bursts Threshold
// Missing consecutive bursts threshold: The Clobi attribute specifies the maximum number of
// missing consecutive scheduled bursts from the ONU that the OLT is willing to tolerate without
// raising an alarm. The value of this attribute defaults to 4. (R,-W) (mandatory) (4-bytes)
//
type OnuDynamicPowerManagementControl struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
onudynamicpowermanagementcontrolBME = &ManagedEntityDefinition{
Name: "OnuDynamicPowerManagementControl",
ClassID: 336,
MessageTypes: mapset.NewSetWith(
Get,
Set,
),
AllowedAttributeMask: 0xfff0,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
1: ByteField("PowerReductionManagementCapability", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
2: ByteField("PowerReductionManagementMode", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
3: Uint16Field("Itransinit", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
4: Uint16Field("Itxinit", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
5: Uint32Field("MaximumSleepInterval", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
6: Uint32Field("MaximumReceiverOffInterval", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
7: Uint32Field("MinimumAwareInterval", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
8: Uint16Field("MinimumActiveHeldInterval", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
9: Uint64Field("MaximumSleepIntervalExtension", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9),
10: ByteField("EthernetPassiveOpticalNetworkEponCapabilityExtension", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, true, false, 10),
11: ByteField("EponSetupExtension", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11),
12: Uint32Field("MissingConsecutiveBurstsThreshold", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
},
Access: CreatedByOnu,
Support: UnknownSupport,
}
}
// NewOnuDynamicPowerManagementControl (class ID 336) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewOnuDynamicPowerManagementControl(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*onudynamicpowermanagementcontrolBME, params...)
}