blob: 4de399d7c29687f9d1e93e8a4417a1dccfa080e6 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// PhysicalPathTerminationPointXdslUniPart2ClassID is the 16-bit ID for the OMCI
// Managed entity Physical path termination point xDSL UNI part 2
const PhysicalPathTerminationPointXdslUniPart2ClassID ClassID = ClassID(99)
var physicalpathterminationpointxdslunipart2BME *ManagedEntityDefinition
// PhysicalPathTerminationPointXdslUniPart2 (class ID #99)
// This ME represents the point in the ONU where physical paths terminate on an xDSL CO modem
// (xTU-C). Standards and chip sets support several forms of DSL, including VDSL2, and the xDSL ME
// family is used for all of them, with specific extensions for technology variations.
//
// The ONU creates or deletes an instance of this ME at the same time it creates or deletes the
// corresponding PPTP xDSL UNI part 1.
//
// Relationships
// An instance of this ME is associated with each instance of a PPTP xDSL UNI part 1.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R)
// (mandatory) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 0 Downstream
// xDSL channel configuration profile for bearer channel 0 downstream: (R,-W) (optional) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 1 Downstream
// xDSL channel configuration profile for bearer channel 1 downstream: (R,-W) (optional) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 2 Downstream
// xDSL channel configuration profile for bearer channel 2 downstream: (R,-W) (optional) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 3 Downstream
// xDSL channel configuration profile for bearer channel 3 downstream: (R,-W) (optional) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 0 Upstream
// xDSL channel configuration profile for bearer channel 0 upstream: (R,-W) (optional) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 1 Upstream
// xDSL channel configuration profile for bearer channel 1 upstream: (R,-W) (optional) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 2 Upstream
// xDSL channel configuration profile for bearer channel 2 upstream: (R,-W) (optional) (2-bytes)
//
// Xdsl Channel Configuration Profile For Bearer Channel 3 Upstream
// xDSL channel configuration profile for bearer channel 3 upstream: (R,-W) (optional) (2-bytes)
//
type PhysicalPathTerminationPointXdslUniPart2 struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
physicalpathterminationpointxdslunipart2BME = &ManagedEntityDefinition{
Name: "PhysicalPathTerminationPointXdslUniPart2",
ClassID: 99,
MessageTypes: mapset.NewSetWith(
Get,
Set,
),
AllowedAttributeMask: 0xff00,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
1: Uint16Field("XdslChannelConfigurationProfileForBearerChannel0Downstream", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, true, false, 1),
2: Uint16Field("XdslChannelConfigurationProfileForBearerChannel1Downstream", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, true, false, 2),
3: Uint16Field("XdslChannelConfigurationProfileForBearerChannel2Downstream", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, true, false, 3),
4: Uint16Field("XdslChannelConfigurationProfileForBearerChannel3Downstream", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4),
5: Uint16Field("XdslChannelConfigurationProfileForBearerChannel0Upstream", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, true, false, 5),
6: Uint16Field("XdslChannelConfigurationProfileForBearerChannel1Upstream", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6),
7: Uint16Field("XdslChannelConfigurationProfileForBearerChannel2Upstream", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, true, false, 7),
8: Uint16Field("XdslChannelConfigurationProfileForBearerChannel3Upstream", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
},
Access: CreatedByOnu,
Support: UnknownSupport,
}
}
// NewPhysicalPathTerminationPointXdslUniPart2 (class ID 99) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewPhysicalPathTerminationPointXdslUniPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*physicalpathterminationpointxdslunipart2BME, params...)
}