blob: b21207646cdc954be2b6517c0f6ade872ba3b175 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// Vdsl2LineInventoryAndStatusDataPart2ClassID is the 16-bit ID for the OMCI
// Managed entity VDSL2 line inventory and status data part 2
const Vdsl2LineInventoryAndStatusDataPart2ClassID ClassID = ClassID(169)
var vdsl2lineinventoryandstatusdatapart2BME *ManagedEntityDefinition
// Vdsl2LineInventoryAndStatusDataPart2 (class ID #169)
// This ME extends the xDSL line configuration MEs. The ME name was chosen because its attributes
// were initially unique to ITU-T G.993.2 VDSL2. Due to continuing standards development, some
// attributes - and therefore this ME - have also become applicable to other Recommendations,
// specifically [ITU-T G.992.3] and [ITU-T G.992.5].
//
// This ME contains upstream attributes.
//
// Relationships
// This is one of the status data MEs associated with an xDSL UNI. It is meaningful if the PPTP
// supports [ITU-T G.992.3], [ITU-T G.992.5] or [ITU-T G.993.2]. The ONU automatically creates or
// deletes an instance of this ME upon creation and deletion of a PPTP xDSL UNI part 1 that
// supports these attributes.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R)
// (mandatory) (2-bytes)
//
// Vdsl2 Transmission System Capability Xtu_R
// VDSL2 transmission system capability xTU-R: This attribute extends the xTU-R transmission system
// capability attribute of the xDSL line inventory and status data part 1 to include xTUR VDSL2
// capabilities. It is a defined by bits 57..64 of Table 9.7.12-1. (R) (mandatory) (1-byte)
//
// Actsnrmodeus
// (R) (mandatory) (1-byte)
//
// Upbokle
// UPBOKLE: This attribute contains the electrical length estimated by the VTU-O expressed in
// decibels at 1-MHz, kl0 (see O-UPDATE in clause 12.3.3.2.1.2 of [ITUT-G.993.2]). This is the
// final electrical length that would have been sent from the VTU-O to the VTU-R if the electrical
// length were not forced by the OLT. The value lies in the range 0 (0.0-dB) to 1280 (128.0-dB) (R)
// (mandatory) (2-bytes)
//
// Hlingus
// HLINGus: This attribute is the number of subcarriers per group used to report HLINpsus. (R)
// (mandatory) (1-byte)
//
// Hloggus
// HLOGGus: This attribute is the number of subcarriers per group used to report HLOGpsus. (R)
// (mandatory) (1-byte)
//
// Qlngus
// QLNGus: This attribute is the number of subcarriers per group used to report QLNpsus. (R)
// (mandatory) (1-byte)
//
// Snrgus
// SNRGus: This attribute is the number of subcarriers per group used to report SNRpsus. (R)
// (mandatory) (1-byte)
//
// Mrefpsdus Table
// (R) (mandatory) (3 * N bytes, where N is the number of breakpoints)
//
// Trellisus
// (R) (mandatory for ITU-T G.993.2 VDSL2, optional for others) (1-byte)
//
// Actualce
// ACTUALCE: This attribute reports the cyclic extension used on the line. It is coded as an
// unsigned integer from 2 to 16 in units of N/32 samples, where 2N is the IDFT size. (R)
// (mandatory) (1-byte)
//
// Upbokle_R
// UPBOKLE-R: This attribute contains the electrical length estimated by the VTU-R expressed in
// decibels at 1-MHz. This is the value contained in the message RMSG1 (see clause 12.3.3.2.2.1of
// [ITUT G.993.2]). Its value lies in the range 0 (0.0-dB) to 1280 (128.0-dB) (R) (optional)
// (2-bytes)
//
// Actual Rate Adaptation Mode Upstream
// (R) (optional) (1-byte)
//
// Actual Impulse Noise Protection Roc Upstream
// Actual impulse noise protection ROC upstream: The ACTINP-ROC-us attribute reports the actual INP
// of the ROC in the upstream direction expressed in multiples of T4k. The INP of this attribute is
// equal to the integer value multiplied by 0.1 symbols. Valid values and usage are given in clause
// 7.5.1.34.2 of [ITUT-G.997.1]. (R) (optional) (1-byte)
//
// Snr Margin Roc Upstream
// SNR margin ROC upstream: The SNRM-ROC-us attribute reports the actual signal-to-noise margin of
// the ROC in the upstream direction. Its value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The
// special value 0xFFFF indicates that the attribute is out of range. (R) (optional) (2-bytes)
//
type Vdsl2LineInventoryAndStatusDataPart2 struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
vdsl2lineinventoryandstatusdatapart2BME = &ManagedEntityDefinition{
Name: "Vdsl2LineInventoryAndStatusDataPart2",
ClassID: 169,
MessageTypes: mapset.NewSetWith(
Get,
GetNext,
),
AllowedAttributeMask: 0xfffc,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
1: ByteField("Vdsl2TransmissionSystemCapabilityXtuR", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
2: ByteField("Actsnrmodeus", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
3: Uint16Field("Upbokle", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
4: ByteField("Hlingus", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
5: ByteField("Hloggus", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
6: ByteField("Qlngus", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
7: ByteField("Snrgus", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
8: TableField("MrefpsdusTable", TableAttributeType, 0x0100, TableInfo{nil, 3}, mapset.NewSetWith(Read), false, false, false, 8),
9: ByteField("Trellisus", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
10: ByteField("Actualce", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
11: Uint16Field("UpbokleR", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11),
12: ByteField("ActualRateAdaptationModeUpstream", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12),
13: ByteField("ActualImpulseNoiseProtectionRocUpstream", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, true, false, 13),
14: Uint16Field("SnrMarginRocUpstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14),
},
Access: CreatedByOnu,
Support: UnknownSupport,
}
}
// NewVdsl2LineInventoryAndStatusDataPart2 (class ID 169) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewVdsl2LineInventoryAndStatusDataPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*vdsl2lineinventoryandstatusdatapart2BME, params...)
}