blob: 2b1f36d9c7f29693b9c81ae93d06dd6802ec7d49 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// XdslChannelConfigurationProfileClassID is the 16-bit ID for the OMCI
// Managed entity xDSL channel configuration profile
const XdslChannelConfigurationProfileClassID ClassID = ClassID(107)
var xdslchannelconfigurationprofileBME *ManagedEntityDefinition
// XdslChannelConfigurationProfile (class ID #107)
// This ME contains the channel configuration profile for an xDSL UNI. An instance of this ME is
// created and deleted by the OLT.
//
// NOTE - If [ITUT G.997.1] compatibility is required, bit rates should only be set to integer
// multiples of 1000-bits/s. The ONU may reject attempts to set other values for bit rate
// attributes.
//
// Relationships
// An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part
// 1.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. The value 0 is
// reserved. (R, setbycreate) (mandatory) (2-bytes)
//
// Minimum Data Rate
// Minimum data rate: This parameter specifies the minimum desired net data rate for the bearer
// channel. It is coded in bits per second. (R,-W, setbycreate) (mandatory) (4-bytes)
//
// Maximum Data Rate
// Maximum data rate: This parameter specifies the maximum desired net data rate for the bearer
// channel. It is coded in bits per second. (R,-W, setbycreate) (mandatory) (4-bytes)
//
// Rate Adaptation Ratio
// Rate adaptation ratio: This attribute specifies the weight that should be taken into account
// when performing rate adaptation in the direction of the bearer channel. The attribute is defined
// as a percentage. The value 20, for example, means that 20% of the available data rate (in excess
// of the minimum data rate summed over all bearer channels) is assigned to this bearer channel and
// 80% to the other bearer channels. The OLT must ensure that the sum of rate adaptation ratios
// over all bearers in one direction is 100%. (R,-W, setbycreate) (optional) (1-byte)
//
// Maximum Interleaving Delay
// The delay is coded in milliseconds, varying from 2 to 63, with special meaning assigned to
// values 0, 1 and 255. The value 0 indicates that no delay bound is imposed. The value 1 indicates
// the fast latency path is to be used in the ITUT G.992.1 operating mode and S and D are to be
// selected such that S- 1 and D-= 1 in ITU-T G.992.2, ITUT G.992.3, ITUT G.992.4, ITUT G.992.5 and
// ITUT G.993.2 operating modes. The value 255 indicates a delay bound of 1-ms in ITUT-G.993.2
// operation. (R,-W, setbycreate) (mandatory) (1-byte)
//
// Data Rate Threshold Upshift
// Data rate threshold upshift: This attribute is a threshold on the cumulative data rate upshift
// achieved over one or more bearer channel data rate adaptations. An upshift rate change (DRT up)
// notification is issued by the PPTP xDSL UNI part 1 when the actual data rate exceeds the data
// rate at the last entry into showtime by more than the threshold. The data rate threshold is
// coded in bits per second. (R,-W, setbycreate) (mandatory for xDSL standards that use this
// attribute) (4-bytes)
//
// Data Rate Threshold Downshift
// Data rate threshold downshift: This attribute is a threshold on the cumulative data rate
// downshift achieved over one or more bearer channel data rate adaptations. A downshift rate
// change (DRT down) notification is issued by the PPTP xDSL UNI part 1 when the actual data rate
// is below the data rate at the last entry into showtime by more than the threshold. The data rate
// threshold is coded in bits per second. (R,-W, setbycreate) (mandatory for xDSL standards that
// use this attribute) (4-bytes)
//
// Minimum Reserved Data Rate
// Minimum reserved data rate: This attribute specifies the desired minimum reserved net data rate
// for the bearer channel. The rate is coded in bits per second. This attribute is needed only if
// the rate adaptation mode is set to dynamic in the xDSL line configuration profile part 1. (R,-W,
// setbycreate) (optional) (4-bytes)
//
// Minimum Data Rate In Low _ Power State
// Minimum data rate in low-power state: This parameter specifies the minimum desired net data rate
// for the bearer channel during the low-power state (L1/L2). The power management low-power states
// L1 and L2 are defined in [ITUT-G.992.2] and [ITUT G.992.3], respectively. The data rate is coded
// in bits per second. (R,-W, setbycreate) (mandatory) (4-byte)
//
// Minimum Impulse Noise Protection
// (R,-W, setbycreate) (optional for [ITU-T G.992.1], mandatory for other xDSL standards that use
// this attribute) (1-byte)
//
// Maximum Bit Error Ratio
// (R,-W, setbycreate) (mandatory for standards that use this attribute) (1-byte)
//
// Minimum Impulse Noise Protection 8_Khz
// Minimum impulse noise protection 8-kHz: The INPmin8 attribute specifies the minimum INP for the
// bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625-kHz. It
// is only valid for [ITUT-G.993.2]. INP is expressed in DMT symbols with a subcarrier spacing of
// 8.625-kHz. It can take any integer value from 0 (default) to 16, inclusive. (R, W) (mandatory
// for [ITUT-G.993.2]) (1 byte)
//
// Maximum Delay Variation
// Maximum delay variation: The DVMAX attribute specifies the maximum value for delay variation
// allowed in an OLR procedure. Its value ranges from 1 (0.1-ms) to 254 (25.4-ms). The special
// value 255 specifies that no delay variation bound is imposed. (R, W) (optional: used by
// [ITUT-G.993.2]) (1 byte)
//
// Channel Initialization Policy Selection
// Channel initialization policy selection: The CIPOLICY attribute specifies the policy to
// determine transceiver configuration at initialization. Valid values are 0..1, as defined in the
// Recommendations that use this attribute. (R,-W) (optional) (1-byte)
//
// Minimum Sos Bit Rate Downstream
// Minimum SOS bit rate downstream: The MIN-SOS-BR-ds attribute specifies the minimum net data rate
// required for a valid SOS request in the downstream direction. The value is coded as an unsigned
// integer representing the data rate as a multiple of 8-kbit/s. (R,-W) (optional) (4-bytes)
//
// Minimum Sos Bit Rate Upstream
// Minimum SOS bit rate upstream: The MIN-SOS-BR-us attribute specifies the minimum net data rate
// required for a valid SOS request in the upstream direction. The value is coded as an unsigned
// integer representing the data rate as a multiple of 8-kbit/s. (R,-W) (optional) (4-bytes)
//
type XdslChannelConfigurationProfile struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
xdslchannelconfigurationprofileBME = &ManagedEntityDefinition{
Name: "XdslChannelConfigurationProfile",
ClassID: 107,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0xfffe,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
1: Uint32Field("MinimumDataRate", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
2: Uint32Field("MaximumDataRate", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
3: ByteField("RateAdaptationRatio", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
4: ByteField("MaximumInterleavingDelay", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
5: Uint32Field("DataRateThresholdUpshift", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
6: Uint32Field("DataRateThresholdDownshift", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
7: Uint32Field("MinimumReservedDataRate", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
8: Uint32Field("MinimumDataRateInLowPowerState", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
9: ByteField("MinimumImpulseNoiseProtection", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
10: ByteField("MaximumBitErrorRatio", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
11: ByteField("MinimumImpulseNoiseProtection8Khz", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11),
12: ByteField("MaximumDelayVariation", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
13: ByteField("ChannelInitializationPolicySelection", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13),
14: Uint32Field("MinimumSosBitRateDownstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14),
15: Uint32Field("MinimumSosBitRateUpstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15),
},
Access: CreatedByOlt,
Support: UnknownSupport,
}
}
// NewXdslChannelConfigurationProfile (class ID 107) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewXdslChannelConfigurationProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*xdslchannelconfigurationprofileBME, params...)
}