blob: cf5f2a3e6e2c047e7dc320899ed316c89b9ad3f6 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// XdslLineConfigurationProfilePart2ClassID is the 16-bit ID for the OMCI
// Managed entity xDSL line configuration profile part 2
const XdslLineConfigurationProfilePart2ClassID ClassID = ClassID(105)
var xdsllineconfigurationprofilepart2BME *ManagedEntityDefinition
// XdslLineConfigurationProfilePart2 (class ID #105)
// The overall xDSL line configuration profile is modelled in several parts, all of which are
// associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
// pointer, which refers to the entire set of line configuration profile parts).
//
// Relationships
// An instance of this ME may be associated with zero or more instances of an xDSL UNI.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. All xDSL and
// VDSL2 line configuration profiles and extensions that pertain to a given PPTP xDSL UNI must
// share a common ME ID. (R, setbycreate) (mandatory) (2-bytes)
//
// Downstream Minimum Time Interval For Upshift Rate Adaptation
// Downstream minimum time interval for upshift rate adaptation: This parameter defines the
// interval during which the downstream noise margin must remain above the downstream upshift noise
// margin before the xTU-R attempts to increase the downstream net data rate. Its value ranges from
// 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Upstream Minimum Time Interval For Upshift Rate Adaptation
// Upstream minimum time interval for upshift rate adaptation: This parameter defines the interval
// during which the upstream noise margin must remain above the upstream upshift noise margin
// before the xTU-C attempts to increase the upstream net data rate. Its value ranges from 0 to
// 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Downstream Downshift Noise Margin
// Downstream downshift noise margin: If the downstream noise margin is below the downstream
// downshift noise margin and remains there for more than the downstream minimum time interval for
// downshift rate adaptation, the xTU-R attempts to decrease the downstream net data rate. This
// attribute's value ranges from 0 (0.0 dB) to 310 (31.0 dB). (R,-W, setbycreate) (optional)
// (2-bytes)
//
// Upstream Downshift Noise Margin
// Upstream downshift noise margin: If the upstream noise margin is below the upstream downshift
// noise margin and remains there for more than the upstream minimum time interval for downshift
// rate adaptation, the xTUC attempts to decrease the upstream net data rate. This attribute's
// value ranges from 0 (0.0 dB) to 310 (31.0 dB). (R,-W, setbycreate) (optional) (2-bytes)
//
// Downstream Minimum Time Interval For Downshift Rate Adaptation
// Downstream minimum time interval for downshift rate adaptation: This parameter defines the
// interval during which the downstream noise margin must remain below the downstream downshift
// noise margin before the xTU-R attempts to decrease the downstream net data rate. Its value
// ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Upstream Minimum Time Interval For Downshift Rate Adaptation
// Upstream minimum time interval for downshift rate adaptation: This parameter defines the
// interval during which the upstream noise margin must remain below the upstream downshift noise
// margin before the xTU-C attempts to decrease the upstream net data rate. Its value ranges from 0
// to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
//
// Xtu Impedance State Forced
// (R,-W, setbycreate) (optional) (1-byte)
//
// L0_Time
// L0-time: This parameter specifies the minimum time between an exit from the L2 state and the
// next entry into the L2 state. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
// [ITUT-G.992.5]. It ranges from 0 to 255-s. (R,-W, setbycreate) (mandatory) (1 byte)
//
// L2_Time
// L2-time: This parameter specifies the minimum time between an entry into the L2 state and the
// first power trim in the L2 state, or between two consecutive power trims in the L2 state. It is
// only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. It ranges from 0 to 255-s. (R,
// W, setbycreate) (mandatory) (1 byte)
//
// Downstream Maximum Nominal Power Spectral Density
// Downstream maximum nominal power spectral density: This attribute specifies the maximum nominal
// transmit PSD in the downstream direction during initialization and showtime. A single
// MAXNOMPSDds attribute is defined per mode enabled in the xTSE line configuration attribute. It
// is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. Its value ranges from 0
// (60.0-dBm/Hz) to 300 (-30-dBm/Hz). (R, W, setbycreate) (mandatory) (2 bytes)
//
// Upstream Maximum Nominal Power Spectral Density
// Upstream maximum nominal power spectral density: This attribute specifies the maximum nominal
// transmit PSD in the upstream direction during initialization and showtime. A single MAXNOMPSDus
// attribute is defined per mode enabled in the xTSE line configuration attribute. It is only valid
// for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.993.2]. Its value ranges from 0 (-60.0-dBm/Hz) to
// 300 (-30-dBm/Hz). (R, W, setbycreate) (mandatory) (2 bytes)
//
// Downstream Maximum Nominal Aggregate Transmit Power
// Downstream maximum nominal aggregate transmit power: This attribute specifies the maximum
// nominal aggregate transmit power in the downstream direction during initialization and showtime.
// It is only valid for [ITUT-G.992.3], [ITUT-G.992.4], [ITUT-G.992.5] and [ITUT-G.993.2]. Its
// value ranges from 0 (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate) (mandatory) (1-byte)
//
// Upstream Maximum Nominal Aggregate Transmit Power
// Upstream maximum nominal aggregate transmit power: This parameter specifies the maximum nominal
// aggregate transmit power in the upstream direction during initialization and showtime. It is
// only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. Its value ranges from 0
// (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate) (mandatory) (1 byte)
//
// Upstream Maximum Aggregate_Receive Power
// Upstream maximum aggregate-receive power: This parameter specifies the maximum upstream
// aggregate receive power over a set of subcarriers, as defined in the relevant Recommendation.
// The xTU-C requests an upstream power cutback such that the upstream aggregate receive power over
// that set of subcarriers is at or below the configured maximum value. It is only valid for
// [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. This attribute ranges from 0 (25.5-dBm) to
// 510 (+25.5-dBm). The special value 0xFFFF indicates that no upstream maximum aggregate receive
// power limit is to be applied. (R, W setbycreate) (mandatory) (2 bytes)
//
// Vdsl2 Transmission System Enabling
// VDSL2 transmission system enabling: This configuration attribute extends the transmission system
// coding types to be allowed by the xTU-C. It is a bit map, defined as octet 8 (bits 57..64) in
// Table-9.7.12-1. (R, W, setbycreate) (optional) (1 byte)
//
type XdslLineConfigurationProfilePart2 struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
xdsllineconfigurationprofilepart2BME = &ManagedEntityDefinition{
Name: "XdslLineConfigurationProfilePart2",
ClassID: 105,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0xfffe,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
1: Uint16Field("DownstreamMinimumTimeIntervalForUpshiftRateAdaptation", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1),
2: Uint16Field("UpstreamMinimumTimeIntervalForUpshiftRateAdaptation", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
3: Uint16Field("DownstreamDownshiftNoiseMargin", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
4: Uint16Field("UpstreamDownshiftNoiseMargin", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
5: Uint16Field("DownstreamMinimumTimeIntervalForDownshiftRateAdaptation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
6: Uint16Field("UpstreamMinimumTimeIntervalForDownshiftRateAdaptation", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
7: ByteField("XtuImpedanceStateForced", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
8: ByteField("L0Time", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
9: ByteField("L2Time", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
10: Uint16Field("DownstreamMaximumNominalPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
11: Uint16Field("UpstreamMaximumNominalPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 11),
12: ByteField("DownstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
13: ByteField("UpstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 13),
14: Uint16Field("UpstreamMaximumAggregateReceivePower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
15: ByteField("Vdsl2TransmissionSystemEnabling", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 15),
},
Access: CreatedByOlt,
Support: UnknownSupport,
}
}
// NewXdslLineConfigurationProfilePart2 (class ID 105) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewXdslLineConfigurationProfilePart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*xdsllineconfigurationprofilepart2BME, params...)
}