blob: 361203ff0e0507876befdada54541be34cca24ff [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// XdslLineInventoryAndStatusDataPart2ClassID is the 16-bit ID for the OMCI
// Managed entity xDSL line inventory and status data part 2
const XdslLineInventoryAndStatusDataPart2ClassID ClassID = ClassID(101)
var xdsllineinventoryandstatusdatapart2BME *ManagedEntityDefinition
// XdslLineInventoryAndStatusDataPart2 (class ID #101)
// This ME contains part 2 of the line inventory and status data for an xDSL UNI. The ONU
// automatically creates or deletes an instance of this ME upon the creation or deletion of a PPTP
// xDSL UNI part 1.
//
// NOTE 1 - [ITU-T G.997.1] specifies that bit rate attributes have granularity of 1000-bit/s. If
// ITUT-G.997.1 compliance is required, the ONU should only report values with this granularity.
//
// Relationships
// An instance of this ME is associated with an xDSL UNI.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R)
// (mandatory) (2-bytes)
//
// Xdsl Transmission System
// NOTE 2 - This attribute is only 7-bytes long. An eighth byte identifying VDSL2 capabilities in
// use is defined in the VDSL2 line inventory and status data part 1 ME.
//
// Line Power Management State
// (R) (mandatory) (1-byte)
//
// Downstream Line Attenuation
// NOTE 3 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
// defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
// downstream line attenuation attribute should be set to 0 here, and populated in the VDSL2 line
// inventory and status data part 3 ME instead.
//
// Upstream Line Attenuation
// NOTE 4 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
// defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
// upstream line attenuation attribute should be set to 0 here, and populated in the VDSL2 line
// inventory and status data part 3 ME instead.
//
// Downstream Signal Attenuation
// NOTE 6 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
// defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
// downstream signal attenuation attribute should be set to 0 here, and populated in the VDSL2 line
// inventory and status data part 3 ME instead.
//
// Upstream Signal Attenuation
// NOTE 8 - [ITU-T G.993.2] specifies a per-band array to represent this attribute. The array is
// defined in the VDSL2 line inventory and status data part 3 ME. In an ITU-T G.993.2 context, the
// upstream signal attenuation attribute should be set to 0 here, and populated in the VDSL2 line
// inventory and status data part 3 ME instead.
//
// Downstream Snr Ratio Margin
// Downstream SNR ratio margin: The downstream SNR margin SNRMds is the maximum increase of noise
// power received at the xTUR, such that the BER requirements can still be met for all downstream
// bearer channels. The attribute value ranges from 0 (-64.0 dB) to 1270 (+63.0-dB). The special
// value 0xFFFF indicates that the attribute is out of range (R) (mandatory) (2-bytes)
//
// Upstream Snr Margin
// Upstream SNR margin: The upstream SNR margin SNRMus is the maximum increase of noise power
// received at the xTUC, such that the BER requirements can still be met for all upstream bearer
// channels. The attribute value ranges from 0 (-64.0 dB) to 1270 (+63.0 dB). The special value
// 0xFFFF indicates that the attribute is out of range. (R) (mandatory) (2-bytes)
//
// Downstream Maximum Attainable Data Rate
// Downstream maximum attainable data rate: The ATTNDRds attribute indicates the maximum downstream
// net data rate currently attainable. The rate is coded in bits per second. (R) (mandatory)
// (4-bytes)
//
// Upstream Maximum Attainable Data Rate
// Upstream maximum attainable data rate: The ATTNDRus attribute indicates the maximum upstream net
// data rate currently attainable. The rate is coded in bits per second. (R) (mandatory) (4-bytes)
//
// Downstream Actual Power Spectrum Density
// Downstream actual power spectrum density: The ACTPSDds attribute is the average downstream
// transmit power spectrum density over the subcarriers in use (subcarriers to which downstream
// user data are allocated) delivered by the xTUC at the UC reference point, at the instant of
// measurement. The attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special
// value (0xFFFF) indicates that the parameter is out of range. (R) (mandatory) (2-bytes)
//
// Upstream Actual Power Spectrum Density
// Upstream actual power spectrum density: The ACTPSDus attribute is the average upstream transmit
// power spectrum density over the subcarriers in use (subcarriers to which upstream user data are
// allocated) delivered by the xTUR at the UR reference point, at the instant of measurement. The
// attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special value 0xFFFF
// indicates that the attribute is out of range. (R) (mandatory) (2-bytes)
//
// Downstream Actual Aggregate Transmit Power
// NOTE 9 - The downstream nominal aggregate transmit power may be taken as a best estimate of the
// parameter.
//
// Upstream Actual Aggregate Transmit Power
// NOTE 10 - The upstream nominal aggregate transmit power may be taken as a best estimate of the
// parameter.
//
// Initialization _ Last State Transmitted Downstream
// (R) (mandatory) (1-byte)
//
// Initialization _ Last State Transmitted Upstream
// (R) (mandatory) (1-byte)
//
type XdslLineInventoryAndStatusDataPart2 struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
xdsllineinventoryandstatusdatapart2BME = &ManagedEntityDefinition{
Name: "XdslLineInventoryAndStatusDataPart2",
ClassID: 101,
MessageTypes: mapset.NewSetWith(
Get,
),
AllowedAttributeMask: 0xffff,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
1: MultiByteField("XdslTransmissionSystem", OctetsAttributeType, 0x8000, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, false, false, 1),
2: ByteField("LinePowerManagementState", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
3: Uint16Field("DownstreamLineAttenuation", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
4: Uint16Field("UpstreamLineAttenuation", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
5: Uint16Field("DownstreamSignalAttenuation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
6: Uint16Field("UpstreamSignalAttenuation", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
7: Uint16Field("DownstreamSnrRatioMargin", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
8: Uint16Field("UpstreamSnrMargin", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8),
9: Uint32Field("DownstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
10: Uint32Field("UpstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
11: Uint16Field("DownstreamActualPowerSpectrumDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11),
12: Uint16Field("UpstreamActualPowerSpectrumDensity", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12),
13: Uint16Field("DownstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13),
14: Uint16Field("UpstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
15: ByteField("InitializationLastStateTransmittedDownstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, false, false, 15),
16: ByteField("InitializationLastStateTransmittedUpstream", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, false, false, 16),
},
Access: CreatedByOnu,
Support: UnknownSupport,
}
}
// NewXdslLineInventoryAndStatusDataPart2 (class ID 101) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewXdslLineInventoryAndStatusDataPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*xdsllineinventoryandstatusdatapart2BME, params...)
}