blob: 2f982c9bbe8ac8f710a56f5d69adb58edfc6a24b [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
const FastChannelConfigurationProfileClassId ClassID = ClassID(432)
var fastchannelconfigurationprofileBME *ManagedEntityDefinition
// FastChannelConfigurationProfile (class ID #432)
// This ME contains the FAST channel configuration profile for an xDSL UNI. An instance of this ME
// is created and deleted by the OLT.
//
// Relationships
// An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part
// 1.
//
// Attributes
// Maximum Net Data Rate Maxndr
// Maximum net data rate (MAXNDR): This attribute specifies the value of the maximum net data rate.
// See clause 11.4.2.2 of [ITU-T G.9701]. Valid values range from 0 (0 kbit/s) to 4294967295
// (2^32–1 kbit/s). See clause 7.2.1.1 of [ITUT G.997.2]. (R, W) (mandatory) (4 bytes)
//
// Minimum Expected Throughput Minetr
// Minimum expected throughput (MINETR): This attribute specifies the value of the minimum expected
// throughput. See clause 11.4.2.1 of [ITU-T G.9701]. Valid values range from 0 (0 kbit/s) to
// 4294967295 (2^32–1 kbit/s). See clause 7.2.1.2 of [ITU-T G.997.2]. (R, W) (mandatory) (4 bytes)
//
// Maximum Gamma Data Rate Maxgdr
// Maximum gamma data rate (MAXGDR): This attribute specifies the maximum value of the GDR (see
// clause 7.11.1.3). The GDR shall not exceed MAXGDR at the start of showtime and during showtime.
// Valid values range from 0 (0 kbit/s) to 4294967295 (2^32–1 kbit/s). See clause 7.2.1.3 of [ITU-T
// G.997.2]. (R, W) (mandatory) (4 bytes)
//
// Minimum Gamma Data Rate Mingdr
// Minimum gamma data rate (MINGDR): This attribute specifies the minimum value of the GDR (see
// clause 7.11.1.3). The GDR may be lower than MINGDR. If the GDR is lower than MINGDR at
// initialization or when GDR becomes lower than MINGDR during showtime, a TCA occurs. Valid values
// range from 0 (0 kbit/s) to 4294967295 (2^32–1 kbit/s). See clause 7.2.1.4 of [ITU-T G.997.2].
// (R, W) (mandatory) (4 bytes)
//
// Maximum Delay Delaymax
// Maximum delay (DELAYMAX): This attribute specifies the maximum allowed delay for retransmission.
// See clause 9.8 of [ITU-T G.9701]. The ITUT G.9701 control parameter delay_max is set to the same
// value as the maximum delay. See clause 11.4.2.3 of [ITU-T G.9701]. Valid values range from 4
// (1 ms) to 252 (63 ms) in steps of 0.25 ms. See clause 7.2.2.1 of [ITUT G.997.2]. (R, W)
// (mandatory) (4 bytes)
//
// Minimum Impulse Noise Protection Against Shine Inpmin_Shine
// Minimum impulse noise protection against SHINE (INPMIN_SHINE): This attribute specifies the
// minimum INP against SHINE. See clause 9.8 of [ITU-T G.9701]. The ITU-T G.9701 control parameter
// INP_min_shine is set to the same value as the minimum INP against SHINE. See clause 11.4.2.4 of
// [ITU-T G.9701]. Valid values range from 0 to 520 (520 symbol periods). See clause 7.2.2.2 of
// [ITUT G.997.2]. (R, W) (mandatory) (2 bytes)
//
// Shine Ratio Shineratio
// SHINE ratio (SHINERATIO): This attribute specifies the SHINE ratio that is used in the
// definition of the expected throughput rate (ETR). See clause 9.8 of [ITUT G.9701]. The ITU-T
// G.9701 control parameter SHINEratio is set to the same value as the SHINE ratio. See clause
// 11.4.2.5 of [ITU-T G.9701]. The value is expressed in units of 0.001, Valid values range from 0
// to 100 (0.01) in steps of 0.001. See clause 7.2.2.3 of [ITU-T G.997.2]. (R, W) (mandatory)
// (1 byte)
//
// Minimum Impulse Noise Protection Against Rein Inpmin_Rein
// Minimum impulse noise protection against REIN (INPMIN_REIN): This attribute specifies the
// minimum INP against REIN. See clause 9.8 of [ITU-T G.9701]. The ITU-T G.9701 control parameter
// INP_min_rein is set to the same value as the minimum INP against REIN. See clause 11.4.2.6 of
// [ITU-T G.9701]. Valid values range from 0 to 63 (63 symbol periods). See clause 7.2.2.4 of
// [ITU-T G.997.2]. (R, W) (mandatory) (1 byte)
//
// Rein Inter_Arrival Time Iat_Rein
// (R, W) (mandatory) (1 byte)
//
// Minimum Reed_Solomon Rfec_Nfec Ratio Rnratio
// Minimum Reed-Solomon RFEC/NFEC ratio (RNRATIO): This attribute specifies the minimal required
// ratio, RFEC/NFEC, of Reed-Solomon code parameters. The ITU-T G.9701 control parameter rnratio is
// set to the same value as the minimum Reed-Solomon RFEC/NFEC ratio. See clause 11.4.2.8 of
// [ITUT G.9701]. The value is expressed in units of 1/32, Valid values range from 0 to 8 (1/4).
// See clause 7.2.2.6 of [ITU-T G.997.2]. (R, W) (mandatory) (1 byte)
//
// Rtx_Tc Testmode Rtx_Testmode
// RTX-TC testmode (RTX_TESTMODE): This Boolean attribute specifies whether the retransmission test
// mode defined in clause 9.8.3.1.2 [ITU-T G.9701] is enabled (true) or disabled (disabled). See
// clause 7.2.2.7 of [ITU-T G.997.2]. (R, W) (optional) (1 byte)
//
type FastChannelConfigurationProfile struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
fastchannelconfigurationprofileBME = &ManagedEntityDefinition{
Name: "FastChannelConfigurationProfile",
ClassID: 432,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0XFFC0,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint32Field("MaximumNetDataRateMaxndr", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 0),
1: Uint32Field("MinimumExpectedThroughputMinetr", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 1),
2: Uint32Field("MaximumGammaDataRateMaxgdr", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 2),
3: Uint32Field("MinimumGammaDataRateMingdr", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 3),
4: Uint32Field("MaximumDelayDelaymax", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 4),
5: Uint16Field("MinimumImpulseNoiseProtectionAgainstShineInpminShine", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 5),
6: ByteField("ShineRatioShineratio", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 6),
7: ByteField("MinimumImpulseNoiseProtectionAgainstReinInpminRein", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 7),
8: ByteField("ReinInterArrivalTimeIatRein", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 8),
9: ByteField("MinimumReedSolomonRfecNfecRatioRnratio", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 9),
10: ByteField("RtxTcTestmodeRtxTestmode", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 10),
},
}
}
// NewFastChannelConfigurationProfile (class ID 432 creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from the wire, about to be sent on the wire.
func NewFastChannelConfigurationProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(fastchannelconfigurationprofileBME, params...)
}