| BBSim Configuration |
| =================== |
| |
| BBSim startup options |
| --------------------- |
| |
| ``BBSim`` supports a series of options that can be set at startup, you can see |
| the list via ``./bbsim --help`` |
| |
| .. code:: bash |
| |
| $ ./bbsim --help |
| Usage of ./bbsim: |
| -api_address string |
| IP address:port (default ":50070") |
| -authRetry |
| Set this flag if BBSim should retry EAPOL (Authentication) upon failure until success |
| -bp_format string |
| Bandwidth profile format, 'mef' or 'ietf' (default "mef") |
| -ca string |
| Set the mode for controlled activation of PON ports and ONUs (default "default") |
| -config string |
| Configuration file path (default "configs/bbsim.yaml") |
| -cpuprofile string |
| write cpu profile to file |
| -delay int |
| The delay between ONU DISCOVERY batches in milliseconds (1 ONU per each PON PORT at a time (default 200) |
| -dhcpRetry |
| Set this flag if BBSim should retry DHCP upon failure until success |
| -dmi_server_address string |
| IP address:port (default ":50075") |
| -enableEvents |
| Enable sending BBSim events on configured kafka server |
| -enableperf |
| Setting this flag will cause BBSim to not store data like traffic schedulers, flows of ONUs etc.. |
| -kafkaAddress string |
| IP:Port for kafka (default ":9092") |
| -kafkaEventTopic string |
| Ability to configure the topic on which BBSim publishes events on Kafka |
| -logCaller |
| Whether to print the caller filename or not |
| -logLevel string |
| Set the log level (trace, debug, info, warn, error) (default "debug") |
| -nni int |
| Number of NNI ports per OLT device to be emulated (default 1) |
| -nni_speed uint |
| Reported speed of the NNI ports in Mbps (default 1000) |
| -oltRebootDelay int |
| Time that BBSim should before restarting after a reboot (default 60) |
| -olt_id int |
| OLT device ID |
| -omci_response_rate int |
| Amount of OMCI messages to respond to (default 10) |
| -onu int |
| Number of ONU devices per PON port to be emulated (default 1) |
| -openolt_address string |
| IP address:port (default ":50060") |
| -pon int |
| Number of PON ports per OLT device to be emulated (default 1) |
| -pots int |
| Number of POTS UNI Ports per ONU device to be emulated (default 0) |
| -rest_api_address string |
| IP address:port (default ":50071") |
| -services string |
| Service Configuration file path (default "configs/att-services.yaml") |
| -uni int |
| Number of UNI Ports per ONU device to be emulated (default 4) |
| |
| |
| |
| |
| ``BBSim`` also looks for a configuration file in ``configs/bbsim.yaml`` from |
| which it reads a number of default settings. The command line options listed |
| above override the corresponding configuration file settings. A sample |
| configuration file is given below: |
| |
| .. literalinclude:: ../../configs/bbsim.yaml |
| |
| .. _ConfiguringServices: |
| |
| Configuring RG Services |
| ----------------------- |
| |
| BBSim supports different services in the RG. |
| Those services are described through a configuration file that is specified via the ``-services`` flag. |
| |
| Below are examples of the tree commonly used configurations: |
| |
| .. literalinclude:: ../../configs/att-services.yaml |
| |
| .. literalinclude:: ../../configs/dt-services.yaml |
| |
| .. literalinclude:: ../../configs/tt-services.yaml |
| |
| Controlled PON and ONU activation |
| --------------------------------- |
| |
| BBSim provides support for controlled PON and ONU activation. This gives you the ability |
| to manually enable PON Ports and ONUs as needed. |
| |
| By default both PON ports and ONUs are automatically activated when OLT is enabled. This can |
| be controlled using ``-ca`` option. |
| |
| ``-ca`` can be set to one of below four modes: |
| |
| - default: PON ports and ONUs are automatic activated (default behavior). |
| |
| - only-onu: PON ports automatically enabled and ONUs activated on demand |
| On Enable OLT, IntfIndications for all PON ports are sent but ONU discovery indications are not sent. |
| When PoweronONU request is received at BBSim API server then ONU discovery indication is sent for that ONU. |
| |
| - only-pon: PON ports enabled on demand and ONUs automatically activated |
| On Enable OLT, neither IntfIndications for PON ports nor ONU discovery indications are sent. |
| When EnablePonIf request is received at OpenOLT server, then that PON port is enabled and |
| IntfIndication is sent for that PON and all ONUs under that ports are discovered automatically. |
| |
| - both: Both PON ports and ONUs are activated on demand |
| On Enable OLT, neither IntfIndication for PON ports nor ONU discovery indications are sent. |
| When EnablePonIf request is received on OpenOLT server then |
| IntfIndication is sent for that PON but no ONU discovery indication |
| will be sent. |
| When PoweronONU request is received at BBSim API server then ONU discovery indication is sent for that ONU. |
| |
| Pon Port and ONU on demand activation is managed via ``BBSimCtl``. |
| You can find more information in the :ref:`Operations` page. |
| |
| Publishing BBSim Events on kafka |
| -------------------------------- |
| |
| BBSim provides option for publishing events on kafka. To publish events on |
| kafka, set BBSimEvents flag and configure kafkaAddress. |
| |
| Once BBSim is started, it will publish events (as and when they happen) on |
| topic ``BBSim-OLT-<id>-Events``. |
| |
| Types of Events: |
| - OLT-enable-received |
| - OLT-disable-received |
| - OLT-reboot-received |
| - OLT-reenable-received |
| - ONU-discovery-indication-sent |
| - ONU-activate-indication-received |
| - MIB-upload-received |
| - MIB-upload-done |
| - Flow-add-received |
| - Flow-remove-received |
| - ONU-authentication-done |
| - ONU-DHCP-ACK-received |
| |
| Sample output of kafkacat consumer for BBSim with OLT-ID 4: |
| |
| .. code:: bash |
| |
| $ kafkacat -b localhost:9092 -t BBSim-OLT-4-Events -C |
| {"EventType":"OLT-enable-received","OnuSerial":"","OltID":4,"IntfID":-1,"OnuID":-1,"EpochTime":1583152243144,"Timestamp":"2020-03-02 12:30:43.144449453"} |
| {"EventType":"ONU-discovery-indication-sent","OnuSerial":"BBSM00040001","OltID":4,"IntfID":0,"OnuID":0,"EpochTime":1583152243227,"Timestamp":"2020-03-02 12:30:43.227183506"} |
| {"EventType":"ONU-activate-indication-received","OnuSerial":"BBSM00040001","OltID":4,"IntfID":0,"OnuID":1,"EpochTime":1583152243248,"Timestamp":"2020-03-02 12:30:43.248225467"} |
| {"EventType":"MIB-upload-received","OnuSerial":"BBSM00040001","OltID":4,"IntfID":0,"OnuID":1,"EpochTime":1583152243299,"Timestamp":"2020-03-02 12:30:43.299480183"} |