| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // Vdsl2LineConfigurationExtensions2ClassID is the 16-bit ID for the OMCI |
| // Managed entity VDSL2 line configuration extensions 2 |
| const Vdsl2LineConfigurationExtensions2ClassID = ClassID(323) // 0x0143 |
| |
| var vdsl2lineconfigurationextensions2BME *ManagedEntityDefinition |
| |
| // Vdsl2LineConfigurationExtensions2 (Class ID: #323 / 0x0143) |
| // This ME extends the xDSL line configuration MEs. The ME name was chosen because its attributes |
| // were initially unique to ITU-T G.993.2 VDSL2. Due to continuing standards development, two of |
| // the attributes (FEXT and NEXT TXREFVNds) are also used in [ITUT-G.992.3] and [ITUT-G.992.5]. |
| // This ME therefore pertains to the latter Recommendations as well as to [ITU-T-G.993.2]. |
| // |
| // The attributes of this ME are further defined in [ITU-T G.997.1]. |
| // |
| // An instance of this ME is created and deleted by the OLT. |
| // |
| // Relationships |
| // An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part |
| // 1.//// The overall xDSL line configuration profile is modelled in several parts, all of which are |
| // associated together through a common ME ID. (The client PPTP xDSL UNI part 1 has a single |
| // pointer, which refers to the entire set of line configuration parts.) |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. All xDSL and VDSL2 line |
| // configuration profiles and extensions that pertain to a given PPTP xDSL must share a common ME |
| // ID. (R, setbycreate) (mandatory) (2-bytes) |
| // |
| // Sos Time Downstream |
| // The SOS-TIME-ds attribute is used in the specification of receiver initiated SOS (see clause |
| // 13.4.3 of [ITUT G.993.2]). If the attribute value is not zero, the standard SOS triggering |
| // criteria are enabled, and the value specifies the duration of the window used in the standard |
| // SOS triggering criteria in the downstream direction. The special value zero indicates that the |
| // standard SOS triggering criteria are disabled, i.e., vendor-discretionary values may be used |
| // instead of the values configured in the MIB for the following parameters: SOS-NTONES-ds, SOS- |
| // CRC-ds, SOS-TIME-ds. The valid range of non-zero values is from 1..255, specifying 64-ms to |
| // 16320 ms in steps of 64-ms. (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // Sos Time Upstream |
| // The SOS-TIME-us attribute is used in the specification of receiver initiated SOS (see clause |
| // 13.4.3 of [ITUT G.993.2]). If the attribute value is not zero, the standard SOS triggering |
| // criteria are enabled, and the value specifies the duration of the window used in the standard |
| // SOS triggering criteria in the upstream direction. The special value zero indicates that the |
| // standard SOS triggering criteria are disabled, i.e., vendor-discretionary values may be used |
| // instead of the values configured in the MIB for the following parameters: SOS-NTONES-us, SOS- |
| // CRC-us, SOS-TIME-us. The valid range of non-zero values is from 1..255, specifying 64-ms to |
| // 16320-ms in steps of 64-ms. (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // Sos Degraded Tones Threshold Downstream |
| // The SOS-NTONES-ds attribute is the minimum percentage of tones in the downstream medley set that |
| // must be degraded in order to arm the first subcondition of the standard SOS triggering criteria |
| // in the downstream direction. The valid range of values is from 1 to 100% in steps of 1. Use of |
| // the special value 0 is described in clause 13.4.3.2 of [ITUT G.993.2]. (R,-W, setbycreate) |
| // (optional) (1-byte) |
| // |
| // Sos Degraded Tones Threshold Upstream |
| // The SOS-NTONES-us attribute is the minimum percentage of tones in the upstream medley set that |
| // must be degraded in order to arm the first subcondition of the standard SOS triggering criteria |
| // in the upstream direction. The valid range of values is from 1 to 100% in steps of 1. Use of the |
| // special value 0 is described in clause 13.4.3.2 of [ITUT-G.993.2]. (R,-W, setbycreate) |
| // (optional) (1-byte) |
| // |
| // Sos Crc Threshold Downstream |
| // The SOS-CRC-ds attribute is the minimum number of normalized CRC anomalies received in SOS-TIME- |
| // ds seconds in order to arm the second sub-condition of the standard SOS triggering criteria (see |
| // clause 13.4.3.2 of [ITU T G.993.2]) in the downstream direction. The valid range of SOS-CRC |
| // values is 0.02 to (216-1)*0.02, in steps of 0.02. The value-0 specifies that the ONU uses its |
| // internal default. (R, W, set-by-create) (optional) (2 bytes) |
| // |
| // Sos Crc Threshold Upstream |
| // The SOS-CRC-us attribute is the minimum number of normalized CRC anomalies received in SOS-TIME- |
| // us seconds in order to arm the second sub-condition of the standard SOS triggering criteria (see |
| // clause 13.4.3.2 of [ITU T G.993.2]) in the upstream direction. The valid range of SOS-CRC values |
| // is 0.02 to (216-1)*0.02, in steps of 0.02. The value-0 specifies that the ONU uses its internal |
| // default. (R, W, set-by-create) (optional) (2 bytes) |
| // |
| // Max Sos Downstream |
| // The MAX-SOS-ds attribute is used in deactivation. If the number of successful SOS procedures in |
| // the downstream direction performed within a 120-s interval exceeds MAX-SOS-ds, the modem goes to |
| // state L3. See clause 12.1.4 of [ITUT G.993.2] for details. The valid range of values is 1 to 15, |
| // with the special value 0 as described in clause 12.1 of [ITUT G.993.2]. (R,-W, setbycreate) |
| // (optional) (1-byte) |
| // |
| // Max Sos Upstream |
| // The MAX-SOS-us attribute is used in deactivation. If the number of successful SOS procedures in |
| // the upstream direction performed within a 120-s interval exceeds MAX-SOS-us, the modem goes to |
| // state L3. See clause 12.1.4 of [ITUT G.993.2] for details. The valid range of values is 1 to 15, |
| // with the special value 0 as described in clause 12.1 of [ITUT G.993.2]. (R,-W, setbycreate) |
| // (optional) (1-byte) |
| // |
| // Snr Max Offset Downstream |
| // The SNRMOFFSET-ROC-ds attribute is the SNR margin offset for the ROC in the downstream |
| // direction. The attribute is used in the specification of the channel initialization policy (see |
| // clause 12.3.7.1 of [ITUT G.993.2]). The valid range of SNR margin offset values is from 0..31-dB |
| // in 0.1-dB steps. (R,-W, setbycreate) (optional) (2-bytes) |
| // |
| // Snr Max Offset Upstream |
| // The SNRMOFFSET-ROC-us attribute is the SNR margin offset for the ROC in the upstream direction. |
| // The attribute is used in the specification of the channel initialization policy (see |
| // clause-12.3.7.1 of [ITUT G.993.2]). The valid range of SNR margin offset values is from 0..31-dB |
| // in 0.1-dB steps. (R,-W, setbycreate) (optional) (2-bytes) |
| // |
| // Roc Minimum Impulse Noise Protection Downstream |
| // The INPMIN-ROC-ds attribute specifies the minimum INP to apply on the ROC in the downstream |
| // direction expressed in multiples of equivalent 4k DMT, xDSL (DMT) symbol length. The minimum INP |
| // is an integer ranging from 0 to 8. (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // Roc Minimum Impulse Noise Protection Upstream |
| // The INPMIN-ROC-us attribute specifies the minimum impulse noise protection to apply on the ROC |
| // in the upstream direction expressed in multiples of equivalent 4k DMT symbol length. The minimum |
| // INP is an integer ranging from 0 to 8. (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // Fext Downstream Transmitter Referred Virtual Noise Table |
| // The FEXT TXREFVNds attribute is the downstream transmitter referred virtual noise specified for |
| // FEXTR duration in Annex C of [ITUT G.992.3] (ADSL2) and Annex C of [ITUT G.992.5] (ADSL2plus). |
| // The syntax of this attribute is the same as that of the TXREFVNds table attribute of the VDSL2 |
| // line configuration extensions ME. (R,-W) (mandatory for Annex-C of [ITUT-G.992.3] and Annex-C of |
| // [ITUT-G.992.5]) (3-*-N bytes, where N is the number of breakpoints) |
| // |
| // Next Downstream Transmitter Referred Virtual Noise Table |
| // The NEXT TXREFVNds attribute is the downstream transmitter referred virtual noise specified for |
| // NEXTR duration in Annex C of [ITUT G.992.3] (ADSL2) and Annex C of [ITUT G.992.5] (ADSL2plus). |
| // The syntax of this attribute is the same as that of the TXREFVNds table attribute of the VDSL2 |
| // line configuration extensions ME. (R,-W) (mandatory for Annex-C of [ITUT-G.992.3] and Annex-C of |
| // [ITUT-G.992.5]) (3-*-N bytes, where N is the number of breakpoints) |
| // |
| type Vdsl2LineConfigurationExtensions2 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| // Attribute name constants |
| |
| const Vdsl2LineConfigurationExtensions2_SosTimeDownstream = "SosTimeDownstream" |
| const Vdsl2LineConfigurationExtensions2_SosTimeUpstream = "SosTimeUpstream" |
| const Vdsl2LineConfigurationExtensions2_SosDegradedTonesThresholdDownstream = "SosDegradedTonesThresholdDownstream" |
| const Vdsl2LineConfigurationExtensions2_SosDegradedTonesThresholdUpstream = "SosDegradedTonesThresholdUpstream" |
| const Vdsl2LineConfigurationExtensions2_SosCrcThresholdDownstream = "SosCrcThresholdDownstream" |
| const Vdsl2LineConfigurationExtensions2_SosCrcThresholdUpstream = "SosCrcThresholdUpstream" |
| const Vdsl2LineConfigurationExtensions2_MaxSosDownstream = "MaxSosDownstream" |
| const Vdsl2LineConfigurationExtensions2_MaxSosUpstream = "MaxSosUpstream" |
| const Vdsl2LineConfigurationExtensions2_SnrMaxOffsetDownstream = "SnrMaxOffsetDownstream" |
| const Vdsl2LineConfigurationExtensions2_SnrMaxOffsetUpstream = "SnrMaxOffsetUpstream" |
| const Vdsl2LineConfigurationExtensions2_RocMinimumImpulseNoiseProtectionDownstream = "RocMinimumImpulseNoiseProtectionDownstream" |
| const Vdsl2LineConfigurationExtensions2_RocMinimumImpulseNoiseProtectionUpstream = "RocMinimumImpulseNoiseProtectionUpstream" |
| const Vdsl2LineConfigurationExtensions2_FextDownstreamTransmitterReferredVirtualNoiseTable = "FextDownstreamTransmitterReferredVirtualNoiseTable" |
| const Vdsl2LineConfigurationExtensions2_NextDownstreamTransmitterReferredVirtualNoiseTable = "NextDownstreamTransmitterReferredVirtualNoiseTable" |
| |
| func init() { |
| vdsl2lineconfigurationextensions2BME = &ManagedEntityDefinition{ |
| Name: "Vdsl2LineConfigurationExtensions2", |
| ClassID: Vdsl2LineConfigurationExtensions2ClassID, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| GetNext, |
| Set, |
| SetTable, |
| ), |
| AllowedAttributeMask: 0xfffc, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: ByteField(Vdsl2LineConfigurationExtensions2_SosTimeDownstream, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1), |
| 2: ByteField(Vdsl2LineConfigurationExtensions2_SosTimeUpstream, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2), |
| 3: ByteField(Vdsl2LineConfigurationExtensions2_SosDegradedTonesThresholdDownstream, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3), |
| 4: ByteField(Vdsl2LineConfigurationExtensions2_SosDegradedTonesThresholdUpstream, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4), |
| 5: Uint16Field(Vdsl2LineConfigurationExtensions2_SosCrcThresholdDownstream, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5), |
| 6: Uint16Field(Vdsl2LineConfigurationExtensions2_SosCrcThresholdUpstream, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6), |
| 7: ByteField(Vdsl2LineConfigurationExtensions2_MaxSosDownstream, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7), |
| 8: ByteField(Vdsl2LineConfigurationExtensions2_MaxSosUpstream, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 8), |
| 9: Uint16Field(Vdsl2LineConfigurationExtensions2_SnrMaxOffsetDownstream, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 9), |
| 10: Uint16Field(Vdsl2LineConfigurationExtensions2_SnrMaxOffsetUpstream, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 10), |
| 11: ByteField(Vdsl2LineConfigurationExtensions2_RocMinimumImpulseNoiseProtectionDownstream, UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 11), |
| 12: ByteField(Vdsl2LineConfigurationExtensions2_RocMinimumImpulseNoiseProtectionUpstream, UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 12), |
| 13: TableField(Vdsl2LineConfigurationExtensions2_FextDownstreamTransmitterReferredVirtualNoiseTable, TableAttributeType, 0x0008, TableInfo{nil, 3}, mapset.NewSetWith(Read, Write), false, false, false, 13), |
| 14: TableField(Vdsl2LineConfigurationExtensions2_NextDownstreamTransmitterReferredVirtualNoiseTable, TableAttributeType, 0x0004, TableInfo{nil, 3}, mapset.NewSetWith(Read, Write), false, false, false, 14), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewVdsl2LineConfigurationExtensions2 (class ID 323) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewVdsl2LineConfigurationExtensions2(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*vdsl2lineconfigurationextensions2BME, params...) |
| } |