| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // Vdsl2LineInventoryAndStatusDataPart4ClassID is the 16-bit ID for the OMCI |
| // Managed entity VDSL2 line inventory and status data part 4 |
| const Vdsl2LineInventoryAndStatusDataPart4ClassID = ClassID(415) // 0x019f |
| |
| var vdsl2lineinventoryandstatusdatapart4BME *ManagedEntityDefinition |
| |
| // Vdsl2LineInventoryAndStatusDataPart4 (Class ID: #415 / 0x019f) |
| // This ME extends the other xDSL line inventory and status data MEs with attributes specific to |
| // VDSL2. |
| // |
| // Relationships |
| // This is one of the status data MEs associated with an xDSL UNI. It is required only if VDSL2 is |
| // supported by the PPTP. The ONU automatically creates or deletes an instance of this ME upon |
| // creation or deletion of a PPTP xDSL UNI part 1 that supports these attributes. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is |
| // implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R) (mandatory) (2-bytes) |
| // |
| // Vtu_O Estimated Upstream Power Back_Off Electrical Length Per Band Upbokle_Pb |
| // VTU-O estimated upstream power back-off electrical length per band (UPBOKLE-pb): This parameter |
| // is a vector of UPBO electrical length per-band estimates for each supported upstream band except |
| // US0, calculated by the VTU-O, based on separate measurements in the supported upstream bands |
| // excluding US0. This parameter is required for the alternative electrical length estimation |
| // method (ELE-M1). Each per-band estimate is represented by 2-bytes, where the estimate is defined |
| // as the integer value multiplied by 0.1-dB. The valid range of values is given in clause |
| // 7.5.1.23.3 of [ITU-T G.997.1] (R) (optional) (4 bands- 2-bytes) |
| // |
| // Vtu_R Estimated Upstream Power Back_Off Electrical Length Per Band Upbokle_R_Pb |
| // VTU-R estimated upstream power back-off electrical length per band (UPBOKLE-R-pb): This |
| // parameter is a vector of UPBO electrical length per-band estimates for each supported downstream |
| // band, calculated by the VTU-R, based on separate measurements in the supported downstream bands. |
| // This parameter is required for the alternative electrical length estimation method (ELEM1). Each |
| // per-band estimate is represented by 2-bytes, where the estimate is defined as the integer value |
| // multiplied by 0.1-dB. The valid range of values is given in clause 7.5.1.23.4 of [ITU-T G.997.1] |
| // (R) (optional) (3-bands- 2-bytes) |
| // |
| // Upbo Downstream Receiver Signal Level Threshold Rxthrshds |
| // UPBO downstream receiver signal level threshold (RXTHRSHds): This parameter reports the |
| // downstream received signal level threshold value used in the alternative electrical length |
| // estimation method (ELE-M1). Valid values range from 0 (-64-dB) to 64 (0 dB). See clause |
| // 7.5.1.23.5 of [ITU-T G.997.1] (R) (optional) (1-byte) |
| // |
| // Upbo Upstream Receiver Signal Level Threshold Rxthrshus |
| // UPBO upstream receiver signal level threshold (RXTHRSHus): This parameter reports the upstream |
| // received signal level threshold value used in the alternative electrical length estimation |
| // method. Valid values range from 0 (-64 dB) to 64-(0 dB). See clause 7.5.1.23.6 of [ITU-T |
| // G.997.1] (R) (optional) (1-byte) |
| // |
| // Actual Alternative Electrical Length Estimation Mod E Act_Aele_Mode |
| // Actual alternative electrical length estimation mode (ACT-AELE-MODE): This parameter reports the |
| // actual AELE-MODE. Valid values are given in clause-7.5.1.23.7 of [ITU-T G.997.1] (R) (optional) |
| // (1-byte) |
| // |
| // Actual Downstream Ripolicy Actripolicyds |
| // Actual downstream RIPOLICY (ACTRIPOLICYds): This parameter indicates the actual re- |
| // initialization policy in use in the downstream direction. Valid values are given in clause |
| // 7.5.1.40.1 of [ITU-T G.997.1] (R) (optional) (1-byte) |
| // |
| // Actual Upstream Ripolicy Actripolicyus |
| // Actual upstream RIPOLICY (ACTRIPOLICYus): This parameter indicates the actual reinitialization |
| // policy in use in the upstream direction. Valid values are given in clause 7.5.1.40.2 of [ITU-T |
| // G.997.1] (R) (optional) (1-byte) |
| // |
| // Attndr Actual M Ethod Attndr_Actmethod |
| // ATTNDR actual method (ATTNDR_ACTMETHOD): This parameter indicates the actual ATTNDR Method used |
| // for calculation of the ATTNDR in the downstream and upstream direction. Valid values are given |
| // in clause 7.5.1.41.1 of [ITUT-G.997.1] (R) (optional) (1-byte) |
| // |
| // Attndr Downstream A Ctual Impulse Noise Protection Attndr_Actinpds |
| // ATTNDR downstream actual impulse noise protection (ATTNDR_ACTINPds): If retransmission is not |
| // used in the downstream direction, this parameter indicates the actual INP used in the improved |
| // calculation of the ATTNDR in the downstream direction. If retransmission is used in the |
| // downstream direction, this parameter indicates the actual INP against SHINE used in the improved |
| // calculation of the ATTNDR in the downstream direction. The format and usage is identical to that |
| // of the ACTINP attribute defined in the xDSL channel downstream status data ME. See clause |
| // 7.5.1.41.2 of [ITU-T G.997.1] (R) (optional) (1-byte) |
| // |
| // Attndr Upstream A Ctual Impulse Noise Protection Attndr_Actinpus |
| // ATTNDR upstream actual impulse noise protection (ATTNDR_ACTINPus): If retransmission is not used |
| // in the upstream direction, this parameter indicates the actual INP used in the improved |
| // calculation of the ATTNDR in the upstream direction. If retransmission is used in the upstream |
| // direction, this parameter indicates the actual INP against SHINE used in the improved |
| // calculation of the ATTNDR in the upstream direction. The format and usage is identical to that |
| // of the ACTINP attribute defined in the xDSL channel downstream status data ME. See clause |
| // 7.5.1.41.3 of [ITU-T G.997.1] (R) (optional) (1-byte) |
| // |
| // Attndr Downstream A Ctual Impulse Noise Protection Against Rein Attndr_Actinp_Reinds |
| // ATTNDR downstream actual impulse noise protection against REIN (ATTNDR_ACTINP_REINds): If |
| // retransmission is used in the downstream direction, this parameter reports the actual INP |
| // against REIN used in the improved calculation of the ATTNDR in the downstream direction. The |
| // format and usage is identical to that of the ACTINP_REIN attribute defined in the xDSL channel |
| // downstream status data ME. See clause 7.5.1.41.4 of [ITU-T G.997.1] (R) (optional) (1-byte) |
| // |
| // Attndr Upstream A Ctual Impulse Noise Protection Against Rein Attndr_Actinp_Reinus |
| // ATTNDR upstream actual impulse noise protection against REIN (ATTNDR_ACTINP_REINus): If |
| // retransmission is used in the upstream direction, this parameter reports the actual INP against |
| // REIN used in the improved calculation of the ATTNDR in the upstream direction. The format and |
| // usage is identical to that of the ACTINP_REIN attribute defined in the xDSL channel downstream |
| // status data ME. See clause 7.5.1.41.5 of [ITUT-G.997.1] (R) (optional) (1-byte) |
| // |
| // Attndr Downstream Actual Delay Attndr_Actdelayds |
| // ATTNDR downstream actual delay (ATTNDR_ACTDELAYds): This parameter indicates the actual delay |
| // used in the improved calculation of the ATTNDR in the downstream direction. The delay of this |
| // attribute is equal to the integer value multiplied by 0.1-ms. Valid values are given in clause |
| // 7.5.1.41.6 of [ITUT G.997.1] (R) (optional) (1-byte) |
| // |
| // Attndr Upstream A Ctual Delay Attndr_Actdelayus |
| // ATTNDR upstream actual delay (ATTNDR_ACTDELAYus): This parameter indicates the actual delay used |
| // in the improved calculation of the ATTNDR in the upstream direction. The delay of this attribute |
| // is equal to the integer value multiplied by 0.1-ms. Valid values are given in clause 7.5.1.41.7 |
| // of [ITUT-G.997.1] (R) (optional) (1-byte) |
| // |
| // Near_End A Ggregate Achievable Net Data Rate Aggachndr_Ne |
| // Near-end aggregate achievable net data rate (AGGACHNDR_NE): This parameter reports the aggregate |
| // achievable net data rate of the VTU-O, in bits per second. See clause 7.5.1.42.1 of [ITU-T |
| // G.997.1] (R) (optional) (4-bytes) |
| // |
| // Far_End Aggregate Achievable Net Data Rate Aggachndr_Fe |
| // Far-end aggregate achievable net data rate (AGGACHNDR_FE): This parameter reports the aggregate |
| // achievable net data rate of the VTU-R, in bits per second. See clause-7.5.1.42.2 of [ITU-T |
| // G.997.1] (R) (optional) (4-bytes) |
| // |
| type Vdsl2LineInventoryAndStatusDataPart4 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| // Attribute name constants |
| |
| const Vdsl2LineInventoryAndStatusDataPart4_VtuOEstimatedUpstreamPowerBackOffElectricalLengthPerBandUpboklePb = "VtuOEstimatedUpstreamPowerBackOffElectricalLengthPerBandUpboklePb" |
| const Vdsl2LineInventoryAndStatusDataPart4_VtuREstimatedUpstreamPowerBackOffElectricalLengthPerBandUpbokleRPb = "VtuREstimatedUpstreamPowerBackOffElectricalLengthPerBandUpbokleRPb" |
| const Vdsl2LineInventoryAndStatusDataPart4_UpboDownstreamReceiverSignalLevelThresholdRxthrshds = "UpboDownstreamReceiverSignalLevelThresholdRxthrshds" |
| const Vdsl2LineInventoryAndStatusDataPart4_UpboUpstreamReceiverSignalLevelThresholdRxthrshus = "UpboUpstreamReceiverSignalLevelThresholdRxthrshus" |
| const Vdsl2LineInventoryAndStatusDataPart4_ActualAlternativeElectricalLengthEstimationModEActAeleMode = "ActualAlternativeElectricalLengthEstimationModEActAeleMode" |
| const Vdsl2LineInventoryAndStatusDataPart4_ActualDownstreamRipolicyActripolicyds = "ActualDownstreamRipolicyActripolicyds" |
| const Vdsl2LineInventoryAndStatusDataPart4_ActualUpstreamRipolicyActripolicyus = "ActualUpstreamRipolicyActripolicyus" |
| const Vdsl2LineInventoryAndStatusDataPart4_AttndrActualMEthodAttndrActmethod = "AttndrActualMEthodAttndrActmethod" |
| const Vdsl2LineInventoryAndStatusDataPart4_AttndrDownstreamACtualImpulseNoiseProtectionAttndrActinpds = "AttndrDownstreamACtualImpulseNoiseProtectionAttndrActinpds" |
| const Vdsl2LineInventoryAndStatusDataPart4_AttndrUpstreamACtualImpulseNoiseProtectionAttndrActinpus = "AttndrUpstreamACtualImpulseNoiseProtectionAttndrActinpus" |
| const Vdsl2LineInventoryAndStatusDataPart4_AttndrDownstreamACtualImpulseNoiseProtectionAgainstReinAttndrActinpReinds = "AttndrDownstreamACtualImpulseNoiseProtectionAgainstReinAttndrActinpReinds" |
| const Vdsl2LineInventoryAndStatusDataPart4_AttndrUpstreamACtualImpulseNoiseProtectionAgainstReinAttndrActinpReinus = "AttndrUpstreamACtualImpulseNoiseProtectionAgainstReinAttndrActinpReinus" |
| const Vdsl2LineInventoryAndStatusDataPart4_AttndrDownstreamActualDelayAttndrActdelayds = "AttndrDownstreamActualDelayAttndrActdelayds" |
| const Vdsl2LineInventoryAndStatusDataPart4_AttndrUpstreamACtualDelayAttndrActdelayus = "AttndrUpstreamACtualDelayAttndrActdelayus" |
| const Vdsl2LineInventoryAndStatusDataPart4_NearEndAGgregateAchievableNetDataRateAggachndrNe = "NearEndAGgregateAchievableNetDataRateAggachndrNe" |
| const Vdsl2LineInventoryAndStatusDataPart4_FarEndAggregateAchievableNetDataRateAggachndrFe = "FarEndAggregateAchievableNetDataRateAggachndrFe" |
| |
| func init() { |
| vdsl2lineinventoryandstatusdatapart4BME = &ManagedEntityDefinition{ |
| Name: "Vdsl2LineInventoryAndStatusDataPart4", |
| ClassID: Vdsl2LineInventoryAndStatusDataPart4ClassID, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| ), |
| AllowedAttributeMask: 0xffff, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: Uint32Field(Vdsl2LineInventoryAndStatusDataPart4_VtuOEstimatedUpstreamPowerBackOffElectricalLengthPerBandUpboklePb, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, true, false, 1), |
| 2: MultiByteField(Vdsl2LineInventoryAndStatusDataPart4_VtuREstimatedUpstreamPowerBackOffElectricalLengthPerBandUpbokleRPb, OctetsAttributeType, 0x4000, 3, toOctets("AAAA"), mapset.NewSetWith(Read), false, true, false, 2), |
| 3: ByteField(Vdsl2LineInventoryAndStatusDataPart4_UpboDownstreamReceiverSignalLevelThresholdRxthrshds, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, true, false, 3), |
| 4: ByteField(Vdsl2LineInventoryAndStatusDataPart4_UpboUpstreamReceiverSignalLevelThresholdRxthrshus, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, true, false, 4), |
| 5: ByteField(Vdsl2LineInventoryAndStatusDataPart4_ActualAlternativeElectricalLengthEstimationModEActAeleMode, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, true, false, 5), |
| 6: ByteField(Vdsl2LineInventoryAndStatusDataPart4_ActualDownstreamRipolicyActripolicyds, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, true, false, 6), |
| 7: ByteField(Vdsl2LineInventoryAndStatusDataPart4_ActualUpstreamRipolicyActripolicyus, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, true, false, 7), |
| 8: ByteField(Vdsl2LineInventoryAndStatusDataPart4_AttndrActualMEthodAttndrActmethod, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8), |
| 9: ByteField(Vdsl2LineInventoryAndStatusDataPart4_AttndrDownstreamACtualImpulseNoiseProtectionAttndrActinpds, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9), |
| 10: ByteField(Vdsl2LineInventoryAndStatusDataPart4_AttndrUpstreamACtualImpulseNoiseProtectionAttndrActinpus, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, true, false, 10), |
| 11: ByteField(Vdsl2LineInventoryAndStatusDataPart4_AttndrDownstreamACtualImpulseNoiseProtectionAgainstReinAttndrActinpReinds, UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11), |
| 12: ByteField(Vdsl2LineInventoryAndStatusDataPart4_AttndrUpstreamACtualImpulseNoiseProtectionAgainstReinAttndrActinpReinus, UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12), |
| 13: ByteField(Vdsl2LineInventoryAndStatusDataPart4_AttndrDownstreamActualDelayAttndrActdelayds, UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, true, false, 13), |
| 14: ByteField(Vdsl2LineInventoryAndStatusDataPart4_AttndrUpstreamACtualDelayAttndrActdelayus, UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14), |
| 15: Uint32Field(Vdsl2LineInventoryAndStatusDataPart4_NearEndAGgregateAchievableNetDataRateAggachndrNe, UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, true, false, 15), |
| 16: Uint32Field(Vdsl2LineInventoryAndStatusDataPart4_FarEndAggregateAchievableNetDataRateAggachndrFe, UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, true, false, 16), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewVdsl2LineInventoryAndStatusDataPart4 (class ID 415) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewVdsl2LineInventoryAndStatusDataPart4(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*vdsl2lineinventoryandstatusdatapart4BME, params...) |
| } |