blob: b566e20ed7151173d98708c69a361f40ca4973eb [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
const Vdsl2LineConfigurationExtensions3ClassId ClassID = ClassID(410)
var vdsl2lineconfigurationextensions3BME *ManagedEntityDefinition
// Vdsl2LineConfigurationExtensions3 (class ID #410)
// This ME extends the xDSL line configuration MEs.
//
// An instance of this ME is created and deleted by the OLT.
//
// Relationships
// An instance of this ME may be associated with zero or more instances of an xDSL UNI.//// The overall xDSL line configuration profile is modelled in several parts, all of which are
// associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
// pointer, which refers to the entire set of line configuration parts).
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. All xDSL and
// VDSL2 line configuration profiles and extensions that pertain to a given PPTP xDSL UNI must
// share a common ME ID. (R, setbycreate) (mandatory) (2 bytes)
//
// Ripolicyds
// RIPOLICYds: This attribute indicates which policy shall be applied to determine the triggers for
// re-initialization in the downstream direction. A valid range of values is given in clause
// 7.3.1.1.12.1 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
//
// Ripolicyus
// RIPOLICYus: This attribute indicates which policy shall be applied to determine the triggers for
// re-initialization in the upstream direction. A valid range of values is given in clause
// 7.3.1.1.12.2 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
//
// Reinit_Time_Thresholdds
// REINIT_TIME_THRESHOLDds: This attribute indicates defines the downstream threshold for re-
// initialization based on SES, to be used by the VTU receiver when re-initialization policy 1 is
// used in downstream. A valid range of values is given in clause 7.3.1.1.13.1 of [ITU-T G.997.1].
// (R, W) (optional) (1 byte)
//
// Reinit_Time_Thresholdus
// REINIT_TIME_THRESHOLDus: This attribute indicates defines the upstream threshold for re-
// initialization based on SES, to be used by the VTU receiver when reinitialization policy 1 is
// used in upstream. A valid range of values is given in clause 7.3.1.1.13.2 of [ITU-T G.997.1].
// (R, W) (optional) (1 byte)
//
// Rxrefvnsfus
// RXREFVNSFus: If SNRM_MODE = 4, this attribute defines the upstream receiver-referred virtual
// noise scaling factor. The attribute value ranges from 0 (–64.0 dBm) to 255 (+63.5 dBm) – see
// clause 7.3.1.7.5 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
//
// Txrefvnsfds
// TXREFVNSFds: If SNRM_MODE = 4, this attribute defines the downstream transmitter referred
// virtual noise scaling factor. The attribute value ranges from 0 (–64.0 dBm) to 255 (+63.5 dBm)
// – see clause 7.3.1.7.6 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
//
// Rtx_Modeds
// RTX_MODEds: This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in
// the downstream direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T
// G.997.1]. (R, W) (mandatory) (1 byte)
//
// Rtx_Modeus
// RTX_MODEus: This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in
// the upstream direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T G.997.1].
// (R, W) (mandatory) (1 byte)
//
// Leftr_Thresh
// LEFTR_THRESH: If retransmission is used in a given transmit direction, LEFTR_THRESH specifies
// the threshold for declaring a near-end ''leftr'' defect. LEFTR_THRESH is equal to the integer
// value of this attribute multiplied by 0.01. Valid values and usage are given in clause 7.3.1.12
// of [ITU-T G.997.1]. (R, W) (mandatory) (1 byte)
//
// Maxdelayoctet_Split Parameter Mdosplit
// MAXDELAYOCTET-split parameter (MDOSPLIT): This attribute defines the percentage of the
// MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated to
// the downstream direction. MDOSPLIT is equal to the integer value of this attribute multiplied by
// 1%. Valid values and usage are given in clause 7.3.1.14 of [ITUT G.997.1]. (R, W) (optional)
// (1 byte)
//
// Attndr Method Attndr_Method
// ATTNDR Method (ATTNDR_METHOD): This attribute specifies the method to be used for the
// calculation of the ATTNDR in the downstream and upstream direction. Valid values are given in
// clause 7.3.1.15.1 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
//
// Attndr Maxdelayoctet_Split Parameter Attndr_Mdosplit
// ATTNDR MAXDELAYOCTET-split parameter (ATTNDR_MDOSPLIT): This attribute defines the percentage of
// the MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated
// to the downstream direction to be used in the improved method for calculation of the ATTNDR. The
// valid values are identical to the values of the line configuration parameter MDOSPLIT. See
// clause 7.3.1.15.2 of [ITUT G.997.1]. (R, W) (optional) (1 byte)
//
type Vdsl2LineConfigurationExtensions3 struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
vdsl2lineconfigurationextensions3BME = &ManagedEntityDefinition{
Name: "Vdsl2LineConfigurationExtensions3",
ClassID: 410,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0XFFF0,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
1: ByteField("Ripolicyds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 1),
2: ByteField("Ripolicyus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 2),
3: ByteField("ReinitTimeThresholdds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 3),
4: ByteField("ReinitTimeThresholdus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 4),
5: ByteField("Rxrefvnsfus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 5),
6: ByteField("Txrefvnsfds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6),
7: ByteField("RtxModeds", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 7),
8: ByteField("RtxModeus", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 8),
9: ByteField("LeftrThresh", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 9),
10: ByteField("MaxdelayoctetSplitParameterMdosplit", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 10),
11: ByteField("AttndrMethodAttndrMethod", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 11),
12: ByteField("AttndrMaxdelayoctetSplitParameterAttndrMdosplit", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12),
},
}
}
// NewVdsl2LineConfigurationExtensions3 (class ID 410 creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from the wire, about to be sent on the wire.
func NewVdsl2LineConfigurationExtensions3(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(vdsl2lineconfigurationextensions3BME, params...)
}