Committing vendored dependencies and generated protos
Change-Id: I349c149b513d9de7d9f60bde2c954a939da2fc54
diff --git a/vendor/github.com/cboling/omci/generated/vdsl2lineconfigurationextensions3.go b/vendor/github.com/cboling/omci/generated/vdsl2lineconfigurationextensions3.go
new file mode 100644
index 0000000..b566e20
--- /dev/null
+++ b/vendor/github.com/cboling/omci/generated/vdsl2lineconfigurationextensions3.go
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+package generated
+
+import "github.com/deckarep/golang-set"
+
+const Vdsl2LineConfigurationExtensions3ClassId ClassID = ClassID(410)
+
+var vdsl2lineconfigurationextensions3BME *ManagedEntityDefinition
+
+// Vdsl2LineConfigurationExtensions3 (class ID #410)
+// This ME extends the xDSL line configuration MEs.
+//
+// An instance of this ME is created and deleted by the OLT.
+//
+// Relationships
+// An instance of this ME may be associated with zero or more instances of an xDSL UNI.//// The overall xDSL line configuration profile is modelled in several parts, all of which are
+// associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
+// pointer, which refers to the entire set of line configuration parts).
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. All xDSL and
+// VDSL2 line configuration profiles and extensions that pertain to a given PPTP xDSL UNI must
+// share a common ME ID. (R, setbycreate) (mandatory) (2 bytes)
+//
+// Ripolicyds
+// RIPOLICYds: This attribute indicates which policy shall be applied to determine the triggers for
+// re-initialization in the downstream direction. A valid range of values is given in clause
+// 7.3.1.1.12.1 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+// Ripolicyus
+// RIPOLICYus: This attribute indicates which policy shall be applied to determine the triggers for
+// re-initialization in the upstream direction. A valid range of values is given in clause
+// 7.3.1.1.12.2 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+// Reinit_Time_Thresholdds
+// REINIT_TIME_THRESHOLDds: This attribute indicates defines the downstream threshold for re-
+// initialization based on SES, to be used by the VTU receiver when re-initialization policy 1 is
+// used in downstream. A valid range of values is given in clause 7.3.1.1.13.1 of [ITU-T G.997.1].
+// (R, W) (optional) (1 byte)
+//
+// Reinit_Time_Thresholdus
+// REINIT_TIME_THRESHOLDus: This attribute indicates defines the upstream threshold for re-
+// initialization based on SES, to be used by the VTU receiver when reinitialization policy 1 is
+// used in upstream. A valid range of values is given in clause 7.3.1.1.13.2 of [ITU-T G.997.1].
+// (R, W) (optional) (1 byte)
+//
+// Rxrefvnsfus
+// RXREFVNSFus: If SNRM_MODE = 4, this attribute defines the upstream receiver-referred virtual
+// noise scaling factor. The attribute value ranges from 0 (–64.0 dBm) to 255 (+63.5 dBm) – see
+// clause 7.3.1.7.5 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+// Txrefvnsfds
+// TXREFVNSFds: If SNRM_MODE = 4, this attribute defines the downstream transmitter referred
+// virtual noise scaling factor. The attribute value ranges from 0 (–64.0 dBm) to 255 (+63.5 dBm)
+// – see clause 7.3.1.7.6 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+// Rtx_Modeds
+// RTX_MODEds: This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in
+// the downstream direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T
+// G.997.1]. (R, W) (mandatory) (1 byte)
+//
+// Rtx_Modeus
+// RTX_MODEus: This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in
+// the upstream direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T G.997.1].
+// (R, W) (mandatory) (1 byte)
+//
+// Leftr_Thresh
+// LEFTR_THRESH: If retransmission is used in a given transmit direction, LEFTR_THRESH specifies
+// the threshold for declaring a near-end ''leftr'' defect. LEFTR_THRESH is equal to the integer
+// value of this attribute multiplied by 0.01. Valid values and usage are given in clause 7.3.1.12
+// of [ITU-T G.997.1]. (R, W) (mandatory) (1 byte)
+//
+// Maxdelayoctet_Split Parameter Mdosplit
+// MAXDELAYOCTET-split parameter (MDOSPLIT): This attribute defines the percentage of the
+// MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated to
+// the downstream direction. MDOSPLIT is equal to the integer value of this attribute multiplied by
+// 1%. Valid values and usage are given in clause 7.3.1.14 of [ITUT G.997.1]. (R, W) (optional)
+// (1 byte)
+//
+// Attndr Method Attndr_Method
+// ATTNDR Method (ATTNDR_METHOD): This attribute specifies the method to be used for the
+// calculation of the ATTNDR in the downstream and upstream direction. Valid values are given in
+// clause 7.3.1.15.1 of [ITU-T G.997.1]. (R, W) (optional) (1 byte)
+//
+// Attndr Maxdelayoctet_Split Parameter Attndr_Mdosplit
+// ATTNDR MAXDELAYOCTET-split parameter (ATTNDR_MDOSPLIT): This attribute defines the percentage of
+// the MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated
+// to the downstream direction to be used in the improved method for calculation of the ATTNDR. The
+// valid values are identical to the values of the line configuration parameter MDOSPLIT. See
+// clause 7.3.1.15.2 of [ITUT G.997.1]. (R, W) (optional) (1 byte)
+//
+type Vdsl2LineConfigurationExtensions3 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ vdsl2lineconfigurationextensions3BME = &ManagedEntityDefinition{
+ Name: "Vdsl2LineConfigurationExtensions3",
+ ClassID: 410,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0XFFF0,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
+ 1: ByteField("Ripolicyds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 1),
+ 2: ByteField("Ripolicyus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 2),
+ 3: ByteField("ReinitTimeThresholdds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 3),
+ 4: ByteField("ReinitTimeThresholdus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 4),
+ 5: ByteField("Rxrefvnsfus", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 5),
+ 6: ByteField("Txrefvnsfds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 6),
+ 7: ByteField("RtxModeds", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 7),
+ 8: ByteField("RtxModeus", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 8),
+ 9: ByteField("LeftrThresh", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 9),
+ 10: ByteField("MaxdelayoctetSplitParameterMdosplit", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 10),
+ 11: ByteField("AttndrMethodAttndrMethod", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 11),
+ 12: ByteField("AttndrMaxdelayoctetSplitParameterAttndrMdosplit", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 12),
+ },
+ }
+}
+
+// NewVdsl2LineConfigurationExtensions3 (class ID 410 creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from the wire, about to be sent on the wire.
+func NewVdsl2LineConfigurationExtensions3(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(vdsl2lineconfigurationextensions3BME, params...)
+}