blob: 673f25a5e2825516fb84b2e7cc74da264d5073b1 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
const PriorityQueueClassId ClassID = ClassID(277)
var priorityqueueBME *ManagedEntityDefinition
// PriorityQueue (class ID #277)
// NOTE 1 – In [ITU-T G.984.4], this is called a priority queue-G.
//
// This ME specifies the priority queue used by a GEM port network CTP in the upstream direction.
// The upstream priority queue ME is also related to a T-CONT ME. By default, this relationship is
// fixed by the ONU hardware architecture, but some ONUs may also permit the relationship to be
// configured through the OMCI, as indicated by the QoS configuration flexibility attribute of the
// ONU2G ME.
//
// In the downstream direction, priority queues are associated with UNIs. Again, the association is
// fixed by default, but some ONUs may permit the association to be configured through the OMCI.
//
// If an ONU as a whole contains priority queues, it instantiates these queues autonomously.
// Priority queues may also be localized to pluggable circuit packs, in which case the ONU creates
// and deletes them in accordance with circuit pack pre-provisioning and the equipped
// configuration.
//
// The OLT can find all the queues by reading the priority queue ME instances. If the OLT tries to
// retrieve a non-existent priority queue, the ONU denies the get action with an error indication.
//
// See also Appendix II.
//
// Priority queues can exist in the ONU core and circuit packs serving both UNI and ANI functions.
// Therefore, they can be indirectly created and destroyed through cardholder provisioning actions.
//
// In the upstream direction, the weight attribute permits the configuring of an optional traffic
// scheduler. Several attributes support back pressure operation, whereby a back-pressure signal is
// sent backwards and causes the attached terminal to temporarily suspend sending data.
//
// In the downstream direction, strict priority discipline among the queues serving a given UNI is
// the default, with priorities established through the related port attribute. If two or more non-
// empty queues have the same priority, capacity is allocated among them in proportion to their
// weights. Note that the details of the downstream model differ from those of the upstream model.
//
// The yellow packet drop thresholds specify the drop probability for a packet that has been marked
// yellow (drop eligible) by a traffic descriptor or by external equipment such as a residential
// gateway (RG). If the current average queue occupancy is less than the minimum threshold, the
// yellow packet drop probability is zero. If the current average queue occupancy is greater than
// or equal to the maximum threshold, the yellow packet drop probability is one. The yellow drop
// probability increases linearly between 0 and max_p as the current average queue occupancy
// increases from the minimum to the maximum threshold.
//
// The same model can be configured for green packets, those regarded as being within the traffic
// contract.
//
// Drop precedence colour marking indicates the method by which a packet is marked as drop eligible
// (yellow). For discard eligibility indicator (DEI) and priority code point (PCP) marking, a drop
// eligible indicator is equivalent to yellow colour; otherwise, the colour is green. For
// differentiated services code point (DSCP) assured forwarding (AF) marking, the lowest drop
// precedence is equivalent to green; otherwise, the colour is yellow.
//
// Relationships
// One or more instances of this ME are associated with the ONU-G ME to model upstream priority
// queues if the traffic management option attribute in the ONU-G ME is 0 or 2.//// One or more instances of this ME are associated with a PPTP UNI ME as downstream priority
// queues. Downstream priority queues may or may not be provided for a virtual Ethernet interface
// point (VEIP).
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. The MSB
// represents the direction (1: upstream, 0: downstream). The 15 LSBs represent a queue ID. The
// queue ID is numbered in ascending order by the ONU itself. It is strongly encouraged that the
// queue ID be formulated to simplify finding related queues. One way to do this is to number the
// queues such that the related port attributes are in ascending order (for the downstream and
// upstream queues separately). The range of downstream queue ids is 0 to 0x7FFF and the range of
// upstream queue ids is 0x8000 to 0xFFFF. (R) (mandatory) (2 bytes)
//
// Queue Configuration Option
// Queue configuration option: This attribute identifies the buffer partitioning policy. The value
// 1 means that several queues share one buffer of maximum queue size, while the value 0 means that
// each queue has an individual buffer of maximum queue size. (R) (mandatory) (1 byte)
//
// Maximum Queue Size
// NOTE 2 – In this and the other similar attributes of the priority queue ME, some legacy
// implementations may take the queue scale factor from the GEM block length attribute of the ANI-G
// ME. This option is discouraged in new implementations.
//
// Allocated Queue Size
// Allocated queue size: This attribute identifies the allocated size of this queue, in bytes,
// scaled by the priority queue scale factor attribute of the ONU2G. (R, W) (mandatory) (2 bytes)
//
// Discard_Block Counter Reset Interval
// Discard-block counter reset interval: This attribute represents the interval in milliseconds at
// which the counter resets itself. (R, W) (optional) (2 bytes)
//
// Threshold Value For Discarded Blocks Due To Buffer Overflow
// Threshold value for discarded blocks due to buffer overflow: This attribute specifies the
// threshold for the number of bytes (scaled by the priority queue scale factor attribute of the
// ONU2G) discarded on this queue due to buffer overflow. Its value controls the declaration of the
// block loss alarm. (R, W) (optional) (2 bytes)
//
// Related Port
// If flexible configuration is not supported, the ONU should reject an attempt to set the related
// port with a parameter error result-reason code.
//
// Traffic Scheduler Pointer
// The ONU should reject an attempt to violate these conditions with a parameter error result-
// reason code.
//
// Weight
// Weight: This attribute represents weight for WRR scheduling. At a given priority level, capacity
// is distributed to non-empty queues in proportion to their weights. In the upstream direction,
// this weight is meaningful if several priority queues are associated with a traffic scheduler or
// T-CONT whose policy is WRR. In the downstream direction, this weight is used by a UNI in a WRR
// fashion. Upon ME instantiation, the ONU sets this attribute to 1. (R, W) (mandatory) (1 byte)
//
// Back Pressure Operation
// Back pressure operation: This attribute enables (0) or disables (1) back pressure operation. Its
// default value is 0. (R, W) (mandatory) (2 bytes)
//
// Back Pressure Time
// Back pressure time: This attribute specifies the duration in microseconds of the backpressure
// signal. It can be used as a pause time for an Ethernet UNI. Upon ME instantiation, the ONU sets
// this attribute to 0. (R, W) (mandatory) (4 bytes)
//
// Back Pressure Occur Queue Threshold
// Back pressure occur queue threshold: This attribute identifies the threshold queue occupancy, in
// bytes, scaled by the priority queue scale factor attribute of the ONU2G, to start sending a
// back-pressure signal. (R, W) (mandatory) (2 bytes)
//
// Back Pressure Clear Queue Threshold
// Back pressure clear queue threshold: This attribute identifies the threshold queue occupancy, in
// bytes, scaled by the priority queue scale factor attribute of the ONU2G, to stop sending a back-
// pressure signal. (R, W) (mandatory) (2 bytes)
//
// Packet Drop Queue Thresholds
// Packet drop queue thresholds: This attribute is a composite of four 2 byte values, a minimum and
// a maximum threshold, measured in bytes, scaled by the priority queue scale factor attribute of
// the ONU2-G, for green and yellow packets. The first value is the minimum green threshold, the
// queue occupancy below which all green packets are admitted to the queue. The second value is the
// maximum green threshold, the queue occupancy at or above which all green packets are discarded.
// The third value is the minimum yellow threshold, the queue occupancy below which all yellow
// packets are admitted to the queue. The fourth value is the maximum yellow threshold, the queue
// occupancy at or above which all yellow packets are discarded. The default is that all thresholds
// take the value of the maximum queue size. (R, W) (optional) (8 bytes)
//
// Packet Drop Max_P
// Packet drop max_p: This attribute is a composite of two 1 byte values, the probability of
// dropping a coloured packet when the queue occupancy lies just below the maximum threshold for
// packets of that colour. The first value is the green packet max_p, and the second value is the
// yellow packet max_p. The probability, max_p, is determined by adding one to the unsigned value
// (0..255) of this attribute and dividing the result by 256. The default for each value is 255.
// (R, W) (optional) (2 bytes)
//
// Queue Drop W_Q
// Queue drop w_q: This attribute determines the averaging coefficient, w_q, as described in
// [b-Floyd]. The averaging coefficient, w_q, is equal to 2Queue_drop_w_q. For example, when queue
// drop_w_q has the value 9, the averaging coefficient, w_q, is 1/512 = 0.001 9. The default value
// is 9. (R, W) (optional) (1 byte)
//
// Drop Precedence Colour Marking
// (R, W) (optional) (1 byte)
//
type PriorityQueue struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
priorityqueueBME = &ManagedEntityDefinition{
Name: "PriorityQueue",
ClassID: 277,
MessageTypes: mapset.NewSetWith(
Get,
Set,
),
AllowedAttributeMask: 0XFFFF,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read), false, false, false, false, 0),
1: ByteField("QueueConfigurationOption", 0, mapset.NewSetWith(Read), false, false, false, false, 1),
2: Uint16Field("MaximumQueueSize", 0, mapset.NewSetWith(Read), false, false, false, false, 2),
3: Uint16Field("AllocatedQueueSize", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 3),
4: Uint16Field("DiscardBlockCounterResetInterval", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 4),
5: Uint16Field("ThresholdValueForDiscardedBlocksDueToBufferOverflow", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 5),
6: Uint32Field("RelatedPort", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 6),
7: Uint16Field("TrafficSchedulerPointer", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 7),
8: ByteField("Weight", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 8),
9: Uint16Field("BackPressureOperation", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 9),
10: Uint32Field("BackPressureTime", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 10),
11: Uint16Field("BackPressureOccurQueueThreshold", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 11),
12: Uint16Field("BackPressureClearQueueThreshold", 0, mapset.NewSetWith(Read, Write), false, false, false, false, 12),
13: Uint64Field("PacketDropQueueThresholds", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 13),
14: Uint16Field("PacketDropMaxP", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 14),
15: ByteField("QueueDropWQ", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 15),
16: ByteField("DropPrecedenceColourMarking", 0, mapset.NewSetWith(Read, Write), false, false, true, false, 16),
},
}
}
// NewPriorityQueue (class ID 277 creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from the wire, about to be sent on the wire.
func NewPriorityQueue(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(priorityqueueBME, params...)
}