| /* |
| * Copyright 2018-2023 Open Networking Foundation (ONF) and the ONF Contributors |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package common |
| |
| import ( |
| "flag" |
| "fmt" |
| "io/ioutil" |
| "net" |
| "strings" |
| |
| "github.com/imdario/mergo" |
| log "github.com/sirupsen/logrus" |
| "gopkg.in/yaml.v2" |
| ) |
| |
| var tagAllocationValues = []string{ |
| "unknown", |
| "shared", |
| "unique", |
| } |
| |
| const ( |
| BP_FORMAT_MEF = "mef" |
| BP_FORMAT_IETF = "ietf" |
| ) |
| |
| type TagAllocation int |
| |
| func (t TagAllocation) String() string { |
| return tagAllocationValues[t] |
| } |
| |
| func tagAllocationFromString(s string) (TagAllocation, error) { |
| for i, v := range tagAllocationValues { |
| if v == strings.TrimSpace(s) { |
| return TagAllocation(i), nil |
| } |
| } |
| log.WithFields(log.Fields{ |
| "ValidValues": strings.Join(tagAllocationValues[1:], ", "), |
| }).Errorf("%s-is-not-a-valid-tag-allocation", s) |
| return TagAllocation(0), fmt.Errorf("%s-is-not-a-valid-tag-allocation", s) |
| } |
| |
| const ( |
| _ TagAllocation = iota |
| TagAllocationShared |
| TagAllocationUnique |
| ) |
| |
| type BBRCliOptions struct { |
| *GlobalConfig |
| BBSimIp string |
| BBSimPort string |
| BBSimApiPort string |
| LogFile string |
| } |
| |
| type GlobalConfig struct { |
| BBSim BBSimConfig |
| Olt OltConfig |
| BBR BBRConfig |
| } |
| |
| type OltConfig struct { |
| Model string `yaml:"model"` |
| Vendor string `yaml:"vendor"` |
| HardwareVersion string `yaml:"hardware_version"` |
| FirmwareVersion string `yaml:"firmware_version"` |
| DeviceId string `yaml:"device_id"` |
| DeviceSerialNumber string `yaml:"device_serial_number"` |
| PonPorts uint32 `yaml:"pon_ports"` |
| NniPorts uint32 `yaml:"nni_ports"` |
| NniSpeed uint32 `yaml:"nni_speed"` |
| OnusPonPort uint32 `yaml:"onus_per_port"` |
| ID int `yaml:"id"` |
| OltRebootDelay int `yaml:"reboot_delay"` |
| PortStatsInterval int `yaml:"port_stats_interval"` |
| OmciResponseRate uint8 `yaml:"omci_response_rate"` |
| UniPorts uint32 `yaml:"uni_ports"` |
| PotsPorts uint32 `yaml:"pots_ports"` |
| NniDhcpTrapVid uint32 `yaml:"nni_dhcp_trap_vid"` |
| } |
| |
| type PonPortsConfig struct { |
| Number uint32 `yaml:"num_pon_ports"` |
| Ranges []PonRangeConfig `yaml:"ranges"` |
| } |
| |
| type IdRange struct { |
| StartId uint32 `yaml:"start"` |
| EndId uint32 `yaml:"end"` |
| } |
| |
| type PonTechnology int |
| |
| var ponTechnologyValues = []string{ |
| "GPON", "XGS-PON", |
| } |
| |
| func (t PonTechnology) String() string { |
| return ponTechnologyValues[t] |
| } |
| |
| const ( |
| GPON PonTechnology = iota |
| XGSPON |
| ) |
| |
| func PonTechnologyFromString(s string) (PonTechnology, error) { |
| for i, val := range ponTechnologyValues { |
| if val == s { |
| return PonTechnology(i), nil |
| } |
| } |
| log.WithFields(log.Fields{ |
| "ValidValues": strings.Join(ponTechnologyValues[:], ", "), |
| }).Errorf("%s-is-not-a-valid-pon-technology", s) |
| return -1, fmt.Errorf("%s-is-not-a-valid-pon-technology", s) |
| } |
| |
| // Constants for default allocation ranges |
| const ( |
| defaultOnuIdStart = 1 |
| defaultAllocIdStart = 1024 |
| defaultGemPortIdPerAllocId = 8 |
| defaultGemportIdStart = 1024 |
| ) |
| |
| type PonRangeConfig struct { |
| PonRange IdRange `yaml:"pon_id_range"` |
| Technology string `yaml:"tech"` |
| OnuRange IdRange `yaml:"onu_id_range"` |
| AllocIdRange IdRange `yaml:"alloc_id_range"` |
| GemportRange IdRange `yaml:"gemport_id_range"` |
| } |
| |
| func GetPonConfigById(id uint32) (*PonRangeConfig, error) { |
| if PonsConfig == nil { |
| return nil, fmt.Errorf("pons-config-nil") |
| } |
| |
| for _, r := range PonsConfig.Ranges { |
| if id >= r.PonRange.StartId && id <= r.PonRange.EndId { |
| return &r, nil |
| } |
| } |
| |
| return nil, fmt.Errorf("pon-config-for-id-%d-not-found", id) |
| } |
| |
| type BBSimConfig struct { |
| ConfigFile string |
| ServiceConfigFile string |
| PonsConfigFile string |
| DhcpRetry bool `yaml:"dhcp_retry"` |
| AuthRetry bool `yaml:"auth_retry"` |
| LogLevel string `yaml:"log_level"` |
| LogCaller bool `yaml:"log_caller"` |
| Delay int `yaml:"delay"` |
| CpuProfile *string `yaml:"cpu_profile"` |
| OpenOltAddress string `yaml:"openolt_address"` |
| ApiAddress string `yaml:"api_address"` |
| RestApiAddress string `yaml:"rest_api_address"` |
| LegacyApiAddress string `yaml:"legacy_api_address"` |
| LegacyRestApiAddress string `yaml:"legacy_rest_api_address"` |
| SadisRestAddress string `yaml:"sadis_rest_address"` |
| SadisServer bool `yaml:"sadis_server"` |
| KafkaAddress string `yaml:"kafka_address"` |
| Events bool `yaml:"enable_events"` |
| ControlledActivation string `yaml:"controlled_activation"` |
| EnablePerf bool `yaml:"enable_perf"` |
| KafkaEventTopic string `yaml:"kafka_event_topic"` |
| DmiServerAddress string `yaml:"dmi_server_address"` |
| BandwidthProfileFormat string `yaml:"bp_format"` |
| InjectOmciUnknownMe bool `yaml:"inject_omci_unknown_me"` |
| InjectOmciUnknownAttributes bool `yaml:"inject_omci_unknown_attributes"` |
| OmccVersion int `yaml:"omcc_version"` |
| } |
| |
| type BBRConfig struct { |
| Log string `yaml:"log"` |
| LogLevel string `yaml:"log_level"` |
| LogCaller bool `yaml:"log_caller"` |
| } |
| |
| type ServiceYaml struct { |
| Name string |
| CTag int `yaml:"c_tag"` |
| STag int `yaml:"s_tag"` |
| NeedsEapol bool `yaml:"needs_eapol"` |
| NeedsDhcp bool `yaml:"needs_dhcp"` |
| NeedsIgmp bool `yaml:"needs_igmp"` |
| NeedsPPPoE bool `yaml:"needs_pppoe"` |
| CTagAllocation string `yaml:"c_tag_allocation"` |
| STagAllocation string `yaml:"s_tag_allocation"` |
| TechnologyProfileID int `yaml:"tp_id"` |
| UniTagMatch int `yaml:"uni_tag_match"` |
| ConfigureMacAddress bool `yaml:"configure_mac_address"` |
| EnableMacLearning bool `yaml:"enable_mac_learning"` |
| UsPonCTagPriority uint8 `yaml:"us_pon_c_tag_priority"` |
| UsPonSTagPriority uint8 `yaml:"us_pon_s_tag_priority"` |
| DsPonCTagPriority uint8 `yaml:"ds_pon_c_tag_priority"` |
| DsPonSTagPriority uint8 `yaml:"ds_pon_s_tag_priority"` |
| } |
| type YamlServiceConfig struct { |
| Workflow string |
| Services []ServiceYaml `yaml:"services,flow"` |
| } |
| |
| func (cfg *YamlServiceConfig) String() string { |
| str := fmt.Sprintf("[workflow: %s, Services: ", cfg.Workflow) |
| |
| for _, s := range cfg.Services { |
| str = fmt.Sprintf("%s[", str) |
| str = fmt.Sprintf("%sname=%s, c_tag=%d, s_tag=%d, ", |
| str, s.Name, s.CTag, s.STag) |
| str = fmt.Sprintf("%sc_tag_allocation=%s, s_tag_allocation=%s, ", |
| str, s.CTagAllocation, s.STagAllocation) |
| str = fmt.Sprintf("%sneeds_eapol=%t, needs_dhcp=%t, needs_igmp=%t", |
| str, s.NeedsEapol, s.NeedsDhcp, s.NeedsIgmp) |
| str = fmt.Sprintf("%stp_id=%d, uni_tag_match=%d", |
| str, s.TechnologyProfileID, s.UniTagMatch) |
| str = fmt.Sprintf("%s]", str) |
| } |
| str = fmt.Sprintf("%s]", str) |
| return str |
| } |
| |
| var ( |
| Config *GlobalConfig |
| Services []ServiceYaml |
| PonsConfig *PonPortsConfig |
| ) |
| |
| // Load the BBSim configuration. This is a combination of CLI parameters and YAML files |
| // We proceed in this order: |
| // - Read CLI parameters |
| // - Using those we read the yaml files (config and services) |
| // - we merge the configuration (CLI has priority over yaml files) |
| func LoadConfig() { |
| |
| Config = GetDefaultOps() |
| |
| cliConf := readCliParams() |
| |
| yamlConf, err := loadBBSimConf(cliConf.BBSim.ConfigFile) |
| |
| if err != nil { |
| log.WithFields(log.Fields{ |
| "file": cliConf.BBSim.ConfigFile, |
| "err": err, |
| }).Fatal("Can't read config file") |
| } |
| |
| // merging Yaml and Default Values |
| if err := mergo.Merge(Config, yamlConf, mergo.WithOverride); err != nil { |
| log.WithFields(log.Fields{ |
| "err": err, |
| }).Fatal("Can't merge YAML and Config") |
| } |
| |
| // merging CLI values on top of the yaml ones |
| if err := mergo.Merge(Config, cliConf, mergo.WithOverride); err != nil { |
| log.WithFields(log.Fields{ |
| "err": err, |
| }).Fatal("Can't merge CLI and Config") |
| } |
| |
| services, err := loadBBSimServices(Config.BBSim.ServiceConfigFile) |
| |
| if err != nil { |
| log.WithFields(log.Fields{ |
| "file": Config.BBSim.ServiceConfigFile, |
| "err": err, |
| }).Fatal("Can't read services file") |
| } |
| |
| Services = services |
| |
| //A blank filename means we should fall back to bbsim defaults |
| if Config.BBSim.PonsConfigFile == "" { |
| PonsConfig, err = getDefaultPonsConfig() |
| if err != nil { |
| log.WithFields(log.Fields{ |
| "err": err, |
| }).Fatal("Can't load Pon interfaces defaults.") |
| } |
| } else { |
| PonsConfig, err = loadBBSimPons(Config.BBSim.PonsConfigFile) |
| |
| if err != nil { |
| log.WithFields(log.Fields{ |
| "file": Config.BBSim.PonsConfigFile, |
| "err": err, |
| }).Fatal("Can't read services file") |
| } |
| } |
| |
| if err := validatePonsConfig(PonsConfig); err != nil { |
| log.WithFields(log.Fields{ |
| "file": Config.BBSim.PonsConfigFile, |
| "err": err, |
| }).Fatal("Invalid Pon interfaces configuration") |
| } |
| } |
| |
| func readCliParams() *GlobalConfig { |
| |
| conf := GetDefaultOps() |
| |
| configFile := flag.String("config", conf.BBSim.ConfigFile, "Configuration file path") |
| servicesFile := flag.String("services", conf.BBSim.ServiceConfigFile, "Service Configuration file path") |
| ponsFile := flag.String("pon_port_config_file", conf.BBSim.PonsConfigFile, "Pon Interfaces Configuration file path") |
| sadisBpFormat := flag.String("bp_format", conf.BBSim.BandwidthProfileFormat, "Bandwidth profile format, 'mef' or 'ietf'") |
| |
| olt_id := flag.Int("olt_id", conf.Olt.ID, "OLT device ID") |
| nni := flag.Int("nni", int(conf.Olt.NniPorts), "Number of NNI ports per OLT device to be emulated") |
| nni_speed := flag.Uint("nni_speed", uint(conf.Olt.NniSpeed), "Reported speed of the NNI ports in Mbps") |
| pon := flag.Int("pon", int(conf.Olt.PonPorts), "Number of PON ports per OLT device to be emulated") |
| onu := flag.Int("onu", int(conf.Olt.OnusPonPort), "Number of ONU devices per PON port to be emulated") |
| uni := flag.Int("uni", int(conf.Olt.UniPorts), "Number of Ethernet UNI Ports per ONU device to be emulated") |
| pots := flag.Int("pots", int(conf.Olt.PotsPorts), "Number of POTS UNI Ports per ONU device to be emulated") |
| NniDchpTrapVid := flag.Int("nni_dhcp_trap_vid", int(conf.Olt.NniDhcpTrapVid), "Vlan to trap the DHCP packets on") |
| |
| oltRebootDelay := flag.Int("oltRebootDelay", conf.Olt.OltRebootDelay, "Time that BBSim should before restarting after a reboot") |
| omci_response_rate := flag.Int("omci_response_rate", int(conf.Olt.OmciResponseRate), "Amount of OMCI messages to respond to") |
| |
| openolt_address := flag.String("openolt_address", conf.BBSim.OpenOltAddress, "IP address:port") |
| api_address := flag.String("api_address", conf.BBSim.ApiAddress, "IP address:port") |
| rest_api_address := flag.String("rest_api_address", conf.BBSim.RestApiAddress, "IP address:port") |
| dmi_server_address := flag.String("dmi_server_address", conf.BBSim.DmiServerAddress, "IP address:port") |
| |
| profileCpu := flag.String("cpuprofile", "", "write cpu profile to file") |
| |
| logLevel := flag.String("logLevel", conf.BBSim.LogLevel, "Set the log level (trace, debug, info, warn, error)") |
| logCaller := flag.Bool("logCaller", conf.BBSim.LogCaller, "Whether to print the caller filename or not") |
| |
| delay := flag.Int("delay", conf.BBSim.Delay, "The delay between ONU DISCOVERY batches in milliseconds (1 ONU per each PON PORT at a time") |
| |
| controlledActivation := flag.String("ca", conf.BBSim.ControlledActivation, "Set the mode for controlled activation of PON ports and ONUs") |
| enablePerf := flag.Bool("enableperf", conf.BBSim.EnablePerf, "Setting this flag will cause BBSim to not store data like traffic schedulers, flows of ONUs etc..") |
| enableEvents := flag.Bool("enableEvents", conf.BBSim.Events, "Enable sending BBSim events on configured kafka server") |
| kafkaAddress := flag.String("kafkaAddress", conf.BBSim.KafkaAddress, "IP:Port for kafka") |
| kafkaEventTopic := flag.String("kafkaEventTopic", conf.BBSim.KafkaEventTopic, "Ability to configure the topic on which BBSim publishes events on Kafka") |
| dhcpRetry := flag.Bool("dhcpRetry", conf.BBSim.DhcpRetry, "Set this flag if BBSim should retry DHCP upon failure until success") |
| authRetry := flag.Bool("authRetry", conf.BBSim.AuthRetry, "Set this flag if BBSim should retry EAPOL (Authentication) upon failure until success") |
| injectOmciUnknownMe := flag.Bool("injectOmciUnknownMe", conf.BBSim.InjectOmciUnknownMe, "Generate an extra MibDB packet with ClassID 37 (Intentionally left blank)") |
| injectOmciUnknownAttributes := flag.Bool("injectOmciUnknownAttributes", conf.BBSim.InjectOmciUnknownAttributes, "Modifies the ONU2-G MibDB packet to add Unknown Attributes") |
| omccVersion := flag.Int("omccVersion", conf.BBSim.OmccVersion, "Set OMCC version to be returned in OMCI response of ME Onu2G") |
| |
| flag.Parse() |
| |
| conf.Olt.ID = int(*olt_id) |
| conf.Olt.NniPorts = uint32(*nni) |
| conf.Olt.NniSpeed = uint32(*nni_speed) |
| conf.Olt.PonPorts = uint32(*pon) |
| conf.Olt.UniPorts = uint32(*uni) |
| conf.Olt.PotsPorts = uint32(*pots) |
| conf.Olt.OnusPonPort = uint32(*onu) |
| conf.Olt.NniDhcpTrapVid = uint32(*NniDchpTrapVid) |
| conf.Olt.OltRebootDelay = *oltRebootDelay |
| conf.Olt.OmciResponseRate = uint8(*omci_response_rate) |
| conf.BBSim.ConfigFile = *configFile |
| conf.BBSim.ServiceConfigFile = *servicesFile |
| conf.BBSim.PonsConfigFile = *ponsFile |
| conf.BBSim.CpuProfile = profileCpu |
| conf.BBSim.LogLevel = *logLevel |
| conf.BBSim.LogCaller = *logCaller |
| conf.BBSim.Delay = *delay |
| conf.BBSim.ControlledActivation = *controlledActivation |
| conf.BBSim.EnablePerf = *enablePerf |
| conf.BBSim.Events = *enableEvents |
| conf.BBSim.KafkaAddress = *kafkaAddress |
| conf.BBSim.OpenOltAddress = *openolt_address |
| conf.BBSim.ApiAddress = *api_address |
| conf.BBSim.RestApiAddress = *rest_api_address |
| conf.BBSim.KafkaEventTopic = *kafkaEventTopic |
| conf.BBSim.AuthRetry = *authRetry |
| conf.BBSim.DhcpRetry = *dhcpRetry |
| conf.BBSim.DmiServerAddress = *dmi_server_address |
| conf.BBSim.InjectOmciUnknownMe = *injectOmciUnknownMe |
| conf.BBSim.InjectOmciUnknownAttributes = *injectOmciUnknownAttributes |
| conf.BBSim.OmccVersion = *omccVersion |
| |
| // update device id if not set |
| if conf.Olt.DeviceId == "" { |
| conf.Olt.DeviceId = net.HardwareAddr{0xA, 0xA, 0xA, 0xA, 0xA, byte(conf.Olt.ID)}.String() |
| } |
| |
| // check that the BP format is valid |
| if (*sadisBpFormat != BP_FORMAT_MEF) && (*sadisBpFormat != BP_FORMAT_IETF) { |
| log.Fatalf("Invalid parameter 'bp_format', supported values are %s and %s, you provided %s", BP_FORMAT_MEF, BP_FORMAT_IETF, *sadisBpFormat) |
| } |
| conf.BBSim.BandwidthProfileFormat = *sadisBpFormat |
| |
| return conf |
| } |
| |
| func GetDefaultOps() *GlobalConfig { |
| |
| c := &GlobalConfig{ |
| BBSimConfig{ |
| ConfigFile: "configs/bbsim.yaml", |
| ServiceConfigFile: "configs/att-services.yaml", |
| // PonsConfigFile is left intentionally blank here |
| // to use the default values computed at runtime depending |
| // on the loaded Services |
| PonsConfigFile: "", |
| LogLevel: "debug", |
| LogCaller: false, |
| Delay: 200, |
| OpenOltAddress: ":50060", |
| ApiAddress: ":50070", |
| RestApiAddress: ":50071", |
| LegacyApiAddress: ":50072", |
| LegacyRestApiAddress: ":50073", |
| SadisRestAddress: ":50074", |
| SadisServer: true, |
| KafkaAddress: ":9092", |
| Events: false, |
| ControlledActivation: "default", |
| EnablePerf: false, |
| KafkaEventTopic: "", |
| DhcpRetry: false, |
| AuthRetry: false, |
| DmiServerAddress: ":50075", |
| BandwidthProfileFormat: BP_FORMAT_MEF, |
| InjectOmciUnknownMe: false, |
| InjectOmciUnknownAttributes: false, |
| OmccVersion: 0xA3, |
| }, |
| OltConfig{ |
| Vendor: "BBSim", |
| Model: "asfvolt16", |
| HardwareVersion: "emulated", |
| FirmwareVersion: "", |
| DeviceSerialNumber: "BBSM00000001", |
| PonPorts: 1, |
| NniPorts: 1, |
| NniSpeed: 10000, //Mbps |
| OnusPonPort: 1, |
| ID: 0, |
| OltRebootDelay: 60, |
| PortStatsInterval: 20, |
| OmciResponseRate: 10, |
| UniPorts: 4, |
| PotsPorts: 0, |
| NniDhcpTrapVid: 0, |
| }, |
| BBRConfig{ |
| LogLevel: "debug", |
| LogCaller: false, |
| }, |
| } |
| return c |
| } |
| |
| func getDefaultPonsConfig() (*PonPortsConfig, error) { |
| |
| if Config == nil { |
| return nil, fmt.Errorf("Config is nil") |
| } |
| if Services == nil { |
| return nil, fmt.Errorf("Services is nil") |
| } |
| |
| //The default should replicate the old way bbsim used to compute resource ranges based on the configuration |
| // 1 allocId per Service * UNI |
| allocIdPerOnu := uint32(Config.Olt.UniPorts * uint32(len(Services))) |
| return &PonPortsConfig{ |
| Number: Config.Olt.PonPorts, |
| Ranges: []PonRangeConfig{ |
| { |
| PonRange: IdRange{0, Config.Olt.PonPorts - 1}, |
| Technology: XGSPON.String(), |
| // we need one ONU ID available per ONU, but the smaller the range the smaller the pool created in the openolt adapter |
| OnuRange: IdRange{defaultOnuIdStart, defaultOnuIdStart + (Config.Olt.OnusPonPort - 1)}, |
| // 1 allocId per Service * UNI * ONU |
| AllocIdRange: IdRange{defaultAllocIdStart, defaultAllocIdStart + (Config.Olt.OnusPonPort * allocIdPerOnu)}, |
| // up to 8 gemport-id per tcont/alloc-id |
| GemportRange: IdRange{defaultGemportIdStart, defaultGemportIdStart + Config.Olt.OnusPonPort*allocIdPerOnu*defaultGemPortIdPerAllocId}, |
| }, |
| }, |
| }, nil |
| } |
| |
| // LoadBBSimConf loads the BBSim configuration from a YAML file |
| func loadBBSimConf(filename string) (*GlobalConfig, error) { |
| yamlConfig := GetDefaultOps() |
| |
| yamlFile, err := ioutil.ReadFile(filename) |
| if err != nil { |
| log.WithFields(log.Fields{ |
| "err": err, |
| "filename": filename, |
| }).Error("Cannot load BBSim configuration file. Using defaults.") |
| return yamlConfig, nil |
| } |
| |
| err = yaml.Unmarshal(yamlFile, yamlConfig) |
| if err != nil { |
| return nil, err |
| } |
| |
| return yamlConfig, nil |
| } |
| |
| // loadBBSimPons loads the configuration of PON interfaces from a YAML file |
| func loadBBSimPons(filename string) (*PonPortsConfig, error) { |
| yamlPonsConfig, err := getDefaultPonsConfig() |
| if err != nil { |
| log.WithFields(log.Fields{ |
| "err": err, |
| }).Error("Can't load Pon interfaces defaults.") |
| return nil, err |
| } |
| |
| yamlFile, err := ioutil.ReadFile(filename) |
| if err != nil { |
| log.WithFields(log.Fields{ |
| "err": err, |
| "filename": filename, |
| }).Error("Cannot load Pon interfaces configuration file. Using defaults.") |
| return yamlPonsConfig, nil |
| } |
| |
| err = yaml.Unmarshal(yamlFile, yamlPonsConfig) |
| if err != nil { |
| return nil, err |
| } |
| |
| return yamlPonsConfig, nil |
| } |
| |
| // validatePonsConfig checks if the configuration to use for the definition of Pon interfaces is valid |
| func validatePonsConfig(pons *PonPortsConfig) error { |
| |
| if pons.Number == 0 { |
| return fmt.Errorf("no-pon-ports") |
| } |
| |
| definedPorts := make([]int, pons.Number) |
| |
| for rIndex, resRange := range pons.Ranges { |
| if _, err := PonTechnologyFromString(resRange.Technology); err != nil { |
| return err |
| } |
| |
| if resRange.PonRange.EndId < resRange.PonRange.StartId { |
| return fmt.Errorf("invalid-pon-ports-limits-in-range-%d", rIndex) |
| } |
| |
| //Keep track of the defined pons |
| for p := resRange.PonRange.StartId; p <= resRange.PonRange.EndId; p++ { |
| if p > uint32(len(definedPorts)-1) { |
| return fmt.Errorf("pon-port-%d-in-range-%d-but-max-is-%d", p, rIndex, pons.Number-1) |
| } |
| definedPorts[p]++ |
| |
| if definedPorts[p] > 1 { |
| return fmt.Errorf("pon-port-%d-has-duplicate-definition-in-range-%d", p, rIndex) |
| } |
| } |
| |
| if resRange.OnuRange.EndId < resRange.OnuRange.StartId { |
| return fmt.Errorf("invalid-onus-limits-in-range-%d", rIndex) |
| } |
| if resRange.AllocIdRange.EndId < resRange.AllocIdRange.StartId { |
| return fmt.Errorf("invalid-allocid-limits-in-range-%d", rIndex) |
| } |
| if resRange.GemportRange.EndId < resRange.GemportRange.StartId { |
| return fmt.Errorf("invalid-gemport-limits-in-range-%d", rIndex) |
| } |
| } |
| |
| //Check if the ranges define all the pons |
| for i, num := range definedPorts { |
| if num < 1 { |
| return fmt.Errorf("pon-port-%d-is-not-defined-in-ranges", i) |
| } |
| } |
| |
| return nil |
| } |
| |
| // LoadBBSimServices parses a file describing the services that need to be created for each UNI |
| func loadBBSimServices(filename string) ([]ServiceYaml, error) { |
| |
| yamlServiceCfg := YamlServiceConfig{} |
| |
| yamlFile, err := ioutil.ReadFile(filename) |
| if err != nil { |
| return nil, err |
| } |
| |
| err = yaml.Unmarshal([]byte(yamlFile), &yamlServiceCfg) |
| if err != nil { |
| return nil, err |
| } |
| |
| for _, service := range yamlServiceCfg.Services { |
| |
| if service.CTagAllocation == "" || service.STagAllocation == "" { |
| log.Fatal("c_tag_allocation and s_tag_allocation are mandatory fields") |
| } |
| |
| if _, err := tagAllocationFromString(string(service.CTagAllocation)); err != nil { |
| log.WithFields(log.Fields{ |
| "err": err, |
| }).Fatal("c_tag_allocation is not valid") |
| } |
| } |
| |
| log.WithFields(log.Fields{ |
| "services": yamlServiceCfg.String(), |
| }).Debug("BBSim services description correctly loaded") |
| return yamlServiceCfg.Services, nil |
| } |
| |
| // This is only used by BBR |
| func GetBBROpts() BBRCliOptions { |
| |
| bbsimIp := flag.String("bbsimIp", "127.0.0.1", "BBSim IP") |
| bbsimPort := flag.String("bbsimPort", "50060", "BBSim Port") |
| bbsimApiPort := flag.String("bbsimApiPort", "50070", "BBSim API Port") |
| logFile := flag.String("logfile", "", "Log to a file") |
| |
| LoadConfig() |
| |
| bbrOptions := BBRCliOptions{ |
| Config, |
| *bbsimIp, |
| *bbsimPort, |
| *bbsimApiPort, |
| *logFile, |
| } |
| |
| return bbrOptions |
| } |