blob: 19b15b3e8872239d2208e876e39d7e9ed62591e3 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// XdslImpulseNoiseMonitorPerformanceMonitoringHistoryDataClassID is the 16-bit ID for the OMCI
// Managed entity xDSL impulse noise monitor performance monitoring history data
const XdslImpulseNoiseMonitorPerformanceMonitoringHistoryDataClassID ClassID = ClassID(324)
var xdslimpulsenoisemonitorperformancemonitoringhistorydataBME *ManagedEntityDefinition
// XdslImpulseNoiseMonitorPerformanceMonitoringHistoryData (class ID #324)
// This ME collects PM data from the impulse noise monitor function at both near and far ends.
// Instances of this ME are created and deleted by the OLT. Note that, unlike most xDSL PM, [ITU-T
// G.997.1] only requires current and previous 15-min interval storage; a longer view of this PM is
// not expected at 15-min granularity.
//
// For a complete discussion of generic PM architecture, refer to clause I.4.
//
// Relationships
// An instance of this ME may be associated with an xDSL UNI. This ME is meaningful only for ITUT
// G.993.2 VDSL2, [ITUT G.992.3] and [ITUT-G.992.5].
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. The ME ID is
// identical to that of this ME's parent PPTP xDSL UNI part 1. (R, setbycreate) (mandatory)
// (2-bytes)
//
// Interval End Time
// Interval end time: This attribute identifies the most recently finished 15-min interval. (R)
// (mandatory) (1-byte)
//
// Threshold Data 1_2 Id
// Threshold data 1/2 ID: No thresholds are defined for this ME. For uniformity with other PM, the
// attribute is retained and shown as mandatory, but it should be set to a null pointer. (R,-W,
// setbycreate) (mandatory) (2-bytes)
//
// Inm Inpeq Histogram Table
// INM INPEQ histogram table: INMINPEQ1..17-L is a count of the near-end INMAINPEQi anomalies
// occurring on the line during the accumulation period. This parameter is subject to inhibiting -
// see clause 7.2.7.13 of [ITUT-G.997.1]. (R) (optional) (2-bytes * 17 entries-= 34-bytes)
//
// Inm Total Measurement
// INM total measurement: INMME-L is a count of the near-end INMAME anomalies occurring on the line
// during the accumulation period. This parameter is subject to inhibiting - see clause 7.2.7.13 of
// [ITUT G.997.1]. (R) (optional) (2-bytes)
//
// Inm Iat Histogram
// INM IAT histogram: INMIAT0..7-L is a count of the near-end INMAIATi anomalies occurring on the
// line during the accumulation period. This parameter is subject to inhibiting - see clause
// 7.2.7.13 of [ITUT G.997.1]. (R) (optional) (2-bytes-* 8 entries-= 16-bytes)
//
// Inm Inpeq Histogram Lfe Table
// INM INPEQ histogram LFE table: INMINPEQ1..17-LFE is a count of the far-end INMAINPEQi anomalies
// occurring on the line during the accumulation period. This parameter is subject to inhibiting -
// see clause 7.2.7.13 of [ITUT-G.997.1]. (R) (optional) (2-bytes * 17 entries-= 34-bytes)
//
// Inm Total Measurement Lfe
// INM total measurement LFE: INMME-LFE is a count of the far-end INMAME anomalies occurring on the
// line during the accumulation period. This parameter is subject to inhibiting - see clause
// 7.2.7.13 of [ITUT G.997.1]. (R) (optional) (2-bytes)
//
// Inm Iat Histogram Lfe
// INM IAT histogram LFE: INMIAT0..7-LFE is a count of the far-end INMAIATi anomalies occurring on
// the line during the accumulation period. This parameter is subject to inhibiting - see clause
// 7.2.7.13 of [ITUT G.997.1]. (R) (optional) (2-bytes-* 8 entries-= 16-bytes)
//
type XdslImpulseNoiseMonitorPerformanceMonitoringHistoryData struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
xdslimpulsenoisemonitorperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
Name: "XdslImpulseNoiseMonitorPerformanceMonitoringHistoryData",
ClassID: 324,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
GetNext,
Set,
GetCurrentData,
),
AllowedAttributeMask: 0xff00,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
1: ByteField("IntervalEndTime", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
2: Uint16Field("ThresholdData12Id", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
3: TableField("InmInpeqHistogramTable", TableAttributeType, 0x2000, TableInfo{nil, 2}, mapset.NewSetWith(Read), false, true, false, 3),
4: Uint16Field("InmTotalMeasurement", CounterAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, true, false, 4),
5: Uint16Field("InmIatHistogram", CounterAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, true, false, 5),
6: TableField("InmInpeqHistogramLfeTable", TableAttributeType, 0x0400, TableInfo{nil, 2}, mapset.NewSetWith(Read), false, true, false, 6),
7: Uint16Field("InmTotalMeasurementLfe", CounterAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, true, false, 7),
8: Uint16Field("InmIatHistogramLfe", CounterAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8),
},
Access: CreatedByOlt,
Support: UnknownSupport,
}
}
// NewXdslImpulseNoiseMonitorPerformanceMonitoringHistoryData (class ID 324) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewXdslImpulseNoiseMonitorPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*xdslimpulsenoisemonitorperformancemonitoringhistorydataBME, params...)
}