blob: ddd39fbaaad004d3e0c58b4841f3f30b0e498133 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* NOTE: This file was generated, manual edits will be overwritten!
*
* Generated by 'goCodeGenerator.py':
* https://github.com/cboling/OMCI-parser/README.md
*/
package generated
import "github.com/deckarep/golang-set"
// MgcConfigDataClassID is the 16-bit ID for the OMCI
// Managed entity MGC config data
const MgcConfigDataClassID ClassID = ClassID(155)
var mgcconfigdataBME *ManagedEntityDefinition
// MgcConfigData (class ID #155)
// The MGC config data ME defines the MGC configuration associated with an MG subscriber. It is
// conditionally required for ONUs that support ITU-T H.248 VoIP services. If a non-OMCI interface
// is used to manage VoIP signalling, this ME is unnecessary.
//
// Instances of this ME are created and deleted by the OLT.
//
// Relationships
// An instance of this ME may be associated with one or more VoIP voice CTP MEs.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
// (mandatory) (2-bytes)
//
// Primary Mgc
// Primary MGC: This attribute points to a network address ME that contains the name (IP-address or
// resolved name) of the primary MGC that controls the signalling messages. The port is optional
// and defaults to 2944 for text message formats and 2955 for binary message formats. (R,-W,
// setbycreate) (mandatory) (2-bytes)
//
// Secondary Mgc
// Secondary MGC: This attribute points to a network address ME that contains the name (IP-address
// or resolved name) of the secondary or backup MGC that controls the signalling messages. The port
// is optional and defaults to 2944 for text message formats and 2955 for binary message formats.
// (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Tcp_Udp Pointer
// TCP/UDP pointer: This attribute points to the TCP/UDP config data ME to be used for
// communication with the MGC. (R,-W, setbycreate) (mandatory) (2-bytes)
//
// Version
// Version: This integer attribute reports the version of the Megaco protocol in use. The ONU
// should deny an attempt by the OLT to set or create a value that it does not support. The value 0
// indicates that no particular version is specified. (R,-W, setbycreate) (mandatory) (1-byte)
//
// Message Format
// The default value is recommended to be 0. (R,-W, setbycreate) (mandatory) (1-byte)
//
// Maximum Retry Time
// Maximum retry time: This attribute specifies the maximum retry time for MGC transactions, in
// seconds. The default value 0 specifies vendor-specific implementation. (R,-W) (optional)
// (2-bytes)
//
// Maximum Retry Attempts
// Maximum retry attempts: This attribute specifies the maximum number of times a message is
// retransmitted to the MGC. The recommended default value 0 specifies vendor-specific
// implementation. (R,-W, setbycreate) (optional) (2-bytes)
//
// Service Change Delay
// Service change delay: This attribute specifies the service status delay time for changes in line
// service status. This attribute is specified in seconds. The default value 0 specifies no delay.
// (R,-W) (optional) (2-bytes)
//
// Termination Id Base
// Termination ID base: This attribute specifies the base string for the ITU-T H.248 physical
// termination ID(s) for this ONU. This string is intended to uniquely identify an ONU. Vendor-
// specific termination identifiers (port IDs) are optionally added to this string to uniquely
// identify a termination on a specific ONU. (R,-W) (optional) (25-bytes)
//
// Softswitch
// Softswitch: This attribute identifies the gateway softswitch vendor. The format is four ASCII
// coded alphabetic characters [A..Z] as defined in [ATIS0300220]. A value of four null bytes
// indicates an unknown or unspecified vendor. (R,-W, setbycreate) (mandatory) (4-bytes)
//
// Message Id Pointer
// Message ID pointer: This attribute points to a large string whose value specifies the message
// identifier string for ITU-T H.248 messages originated by the ONU. (R, W, setbycreate) (optional)
// (2 bytes)
//
type MgcConfigData struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
mgcconfigdataBME = &ManagedEntityDefinition{
Name: "MgcConfigData",
ClassID: 155,
MessageTypes: mapset.NewSetWith(
Create,
Delete,
Get,
Set,
),
AllowedAttributeMask: 0xffe0,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
1: Uint16Field("PrimaryMgc", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
2: Uint16Field("SecondaryMgc", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
3: Uint16Field("TcpUdpPointer", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
4: ByteField("Version", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
5: ByteField("MessageFormat", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
6: Uint16Field("MaximumRetryTime", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6),
7: Uint16Field("MaximumRetryAttempts", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
8: Uint16Field("ServiceChangeDelay", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
9: MultiByteField("TerminationIdBase", OctetsAttributeType, 0x0080, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, true, false, 9),
10: Uint32Field("Softswitch", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
11: Uint16Field("MessageIdPointer", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 11),
},
Access: CreatedByOlt,
Support: UnknownSupport,
Alarms: AlarmMap{
0: "Timeout",
},
}
}
// NewMgcConfigData (class ID 155) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewMgcConfigData(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*mgcconfigdataBME, params...)
}