blob: 27efb8ff833cca9a2a76135cc656c3f393d06a51 [file] [log] [blame]
/*
* Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
* Copyright 2020-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package generated
import "github.com/deckarep/golang-set"
// SoftwareImageClassID is the 16-bit ID for the OMCI
// Managed entity Software image
const SoftwareImageClassID ClassID = ClassID(7)
var softwareimageBME *ManagedEntityDefinition
// SoftwareImage (class ID #7)
// This ME models an executable software image stored in the ONU (documented here as its
// fundamental usage). It may also be used to represent an opaque vendor-specific file
// (vendorspecific usage).
//
// Fundamental usage
//
// The ONU automatically creates two instances of this ME upon the creation of each ME that
// contains independently manageable software, either the ONU itself or an individual circuit pack.
// It populates ME attributes according to data within the ONU or the circuit pack.
//
// Some pluggable equipment may not contain software. Others may contain software that is
// intrinsically bound to the ONU's own software image. No software image ME need exist for such
// equipment, though it may be convenient for the ONU to create them to support software version
// audit from the OLT. In this case, the dependent MEs would support only the get action.
//
// A slot may contain various equipment over its lifetime, and if software image MEs exist, the ONU
// must automatically create and delete them as the equipped configuration changes. The identity of
// the software image is tied to the cardholder.
//
// When an ONU controller packs are duplicated, each can be expected to contain two software image
// MEs, managed through reference to the individual controller packs themselves. When this occurs,
// the ONU should not have a global pair of software images MEs (instance 0), since an action
// (download, activate, commit) directed to instance 0 would be ambiguous.
//
// Relationships
// Two instances of the software image ME are associated with each instance of the ONU or
// cardholder whose software is independently managed.
//
// Attributes
// Managed Entity Id
// Managed entity ID: This attribute uniquely identifies each instance of this ME. The first byte
// indicates the physical location of the equipment hosting the software image, either the ONU (0)
// or a cardholder (1..254). The second byte distinguishes between the two software image ME
// instances (0..1). (R) (mandatory) (2-bytes)
//
// Version
// Version: This string attribute identifies the version of the software. (R) (mandatory)
// (14-bytes)
//
// Is Committed
// Is committed: This attribute indicates whether the associated software image is committed (1) or
// uncommitted (0). By definition, the committed software image is loaded and executed upon reboot
// of the ONU or circuit pack. During normal operation, one software image is always committed,
// while the other is uncommitted. Under no circumstances are both software images allowed to be
// committed at the same time. On the other hand, both software images could be uncommitted at the
// same time if both were invalid. Upon ME instantiation, instance 0 is initialized to committed,
// while instance 1 is initialized to uncommitted (i.e., the ONU ships from the factory with image
// 0 committed). (R) (mandatory) (1-byte)
//
// Is Active
// Is active: This attribute indicates whether the associated software image is active (1) or
// inactive (0). By definition, the active software image is one that is currently loaded and
// executing in the ONU or circuit pack. Under normal operation, one software image is always
// active while the other is inactive. Under no circumstances are both software images allowed to
// be active at the same time. On the other hand, both software images could be inactive at the
// same time if both were invalid. (R) (mandatory) (1-byte)
//
// Is Valid
// Is valid: This attribute indicates whether the associated software image is valid (1) or invalid
// (0). By definition, a software image is valid if it has been verified to be an executable code
// image. The verification mechanism is not subject to standardization; however, it should include
// at least a data integrity check [e.g., a cyclic redundancy check (CRC)] of the entire code
// image. Upon ME instantiation or software download completion, the ONU validates the associated
// code image and sets this attribute according to the result. (R) (mandatory) (1-byte)
//
// Product Code
// Product code: This attribute provides a way for a vendor to indicate product code information on
// a file. It is a character string, padded with trailing nulls if it is shorter than 25 bytes. (R)
// (optional) (25 bytes)
//
// Image Hash
// Image hash: This attribute is an MD5 hash of the software image. It is computed at completion of
// the end download action. (R) (optional) (16-bytes)
//
type SoftwareImage struct {
ManagedEntityDefinition
Attributes AttributeValueMap
}
func init() {
softwareimageBME = &ManagedEntityDefinition{
Name: "SoftwareImage",
ClassID: 7,
MessageTypes: mapset.NewSetWith(
ActivateSoftware,
CommitSoftware,
DownloadSection,
EndSoftwareDownload,
Get,
StartSoftwareDownload,
),
AllowedAttributeMask: 0xfc00,
AttributeDefinitions: AttributeDefinitionMap{
0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
1: MultiByteField("Version", StringAttributeType, 0x8000, 14, toOctets("ICAgICAgICAgICAgICA="), mapset.NewSetWith(Read), true, false, false, 1),
2: ByteField("IsCommitted", EnumerationAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, false, false, 2),
3: ByteField("IsActive", EnumerationAttributeType, 0x2000, 0, mapset.NewSetWith(Read), true, false, false, 3),
4: ByteField("IsValid", EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read), true, false, false, 4),
5: MultiByteField("ProductCode", OctetsAttributeType, 0x0800, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), true, true, false, 5),
6: MultiByteField("ImageHash", StringAttributeType, 0x0400, 16, toOctets("AAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), true, true, false, 6),
},
Access: CreatedByOnu,
Support: UnknownSupport,
}
}
// NewSoftwareImage (class ID 7) creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from or transmitted to the OMCC.
func NewSoftwareImage(params ...ParamData) (*ManagedEntity, OmciErrors) {
return NewManagedEntity(*softwareimageBME, params...)
}