Andrea Campanella | 10426e2 | 2021-10-15 17:58:04 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| 3 | * Copyright 2020-present Open Networking Foundation |
| 4 | |
| 5 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 6 | * you may not use this file except in compliance with the License. |
| 7 | * You may obtain a copy of the License at |
| 8 | |
| 9 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 10 | |
| 11 | * Unless required by applicable law or agreed to in writing, software |
| 12 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 13 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 14 | * See the License for the specific language governing permissions and |
| 15 | * limitations under the License. |
| 16 | */ |
| 17 | /* |
| 18 | * NOTE: This file was generated, manual edits will be overwritten! |
| 19 | * |
| 20 | * Generated by 'goCodeGenerator.py': |
| 21 | * https://github.com/cboling/OMCI-parser/README.md |
| 22 | */ |
| 23 | |
| 24 | package generated |
| 25 | |
| 26 | import "github.com/deckarep/golang-set" |
| 27 | |
| 28 | // Vdsl2LineConfigurationExtensionsClassID is the 16-bit ID for the OMCI |
| 29 | // Managed entity VDSL2 line configuration extensions |
| 30 | const Vdsl2LineConfigurationExtensionsClassID = ClassID(165) // 0x00a5 |
| 31 | |
| 32 | var vdsl2lineconfigurationextensionsBME *ManagedEntityDefinition |
| 33 | |
| 34 | // Vdsl2LineConfigurationExtensions (Class ID: #165 / 0x00a5) |
| 35 | // This ME extends the xDSL line configuration MEs with attributes that were originally unique to |
| 36 | // ITU-T G.993.2 VDSL2. Due to continuing standards development, some attributes - and therefore |
| 37 | // this ME - have also become applicable to other Recommendations, specifically [ITU-T G.992.3] and |
| 38 | // [ITU-T G.992.5]. The attributes of this ME are further defined in [ITUT G.997.1]. An instance of |
| 39 | // this ME is created and deleted by the OLT. |
| 40 | // |
| 41 | // Relationships |
| 42 | // An instance of this ME may be associated with zero or more instances of an xDSL UNI.//// The overall xDSL line configuration profile is modelled in several parts, all of which are |
| 43 | // associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single |
| 44 | // pointer, which refers to the entire set of line configuration parts). |
| 45 | // |
| 46 | // Attributes |
| 47 | // Managed Entity Id |
| 48 | // This attribute uniquely identifies each instance of this ME. All xDSL and VDSL2 line |
| 49 | // configuration profiles and extensions that pertain to a given PPTP xDSL UNI must share a common |
| 50 | // ME ID. (R, setbycreate) (mandatory) (2-bytes) |
| 51 | // |
| 52 | // Vdsl2 Profiles Enabling |
| 53 | // The PROFILES attribute contains the ITU-T G.993.2 profiles to be allowed by the xTU-C. It is |
| 54 | // coded in a bit map representation (0 if not allowed, 1 if allowed) with the following |
| 55 | // definition. |
| 56 | // |
| 57 | // Bit Meaning |
| 58 | // |
| 59 | // 1 (LSB) ITU-T G.993.2 profile 8a |
| 60 | // |
| 61 | // 2 ITU-T G.993.2 profile 8b |
| 62 | // |
| 63 | // 3 ITU-T G.993.2 profile 8c |
| 64 | // |
| 65 | // 4 ITU-T G.993.2 profile 8d |
| 66 | // |
| 67 | // 5 ITU-T G.993.2 profile 12a |
| 68 | // |
| 69 | // 6 ITU-T G.993.2 profile 12b |
| 70 | // |
| 71 | // 7 ITU-T G.993.2 profile 17a |
| 72 | // |
| 73 | // 8 ITU-T G.993.2 profile 30a |
| 74 | // |
| 75 | // (R,-W, setbycreate) (mandatory for ITU-T G.993.2) (1-byte) |
| 76 | // |
| 77 | // Vdsl2 Psd Mask Class Selection Classmask |
| 78 | // NOTE 1 - A single PSD mask class may be selected per annex of [ITU-T G.993.2]. |
| 79 | // |
| 80 | // NOTE 2 - It is expected that only a single annex will be enabled at any given time, such that |
| 81 | // the CLASSMASK attribute, as well as the LIMITMASK and US0DISABLE attributes below, need not be |
| 82 | // vectors of values. |
| 83 | // |
| 84 | // NOTE 3 - Attribute value 4 was formerly defined in [ITU-T G.997.1], and is no longer used. |
| 85 | // |
| 86 | // (R,-W, setbycreate) (mandatory) (1-byte) |
| 87 | // |
| 88 | // VDSL2 PSD mask class selection (CLASSMASK): To reduce the number of configuration possibilities, |
| 89 | // the limit PSD masks are grouped in the following PSD mask classes. |
| 90 | // |
| 91 | // - Class 998 Annex A of [ITU-T G.993.2]: D-32, D-48, D-64, D-128 |
| 92 | // |
| 93 | // - Class 997-M1c Annex B of [ITU-T G.993.2]: 997M1c-A-7 |
| 94 | // |
| 95 | // - Class 997-M1x Annex B of [ITU-T G.993.2]: 997M1x-M |
| 96 | // |
| 97 | // - Class 997-M2x Annex B of [ITU-T G.993.2]: 997E17-M2x-NUS0, 997E30M2xNUS0 |
| 98 | // |
| 99 | // - Class 998-M2x Annex B of [ITU-T G.993.2]: 998M2x-A, 998M2xM, 998M2x-B, 998-M2x-NUS0, |
| 100 | // 998E17-M2xNUS0, 998E17M2xNUS0-M, 998E30M2xNUS0, 998E30M2xNUS0M, 998E17-M2x-A |
| 101 | // |
| 102 | // - Class 998ADE-M2x Annex B of [ITU-T G.993.2]: 998-M2x-A, 998M2x-M, 998-M2x-B, 998-M2x-NUS0, |
| 103 | // 998ADE17-M2x-A, 998ADE17M2xB, 998ADE17-M2x-M, 998ADE17M2xNUS0-M, 998ADE30M2xNUS0-A, |
| 104 | // 998ADE30M2x-NUS0-M, HPEADE1230, HPEADE1730 |
| 105 | // |
| 106 | // - Class 998-B Annex C: POTS-138b, POTS-276b (clause C.2.1.1 of [ITUT-G.993.2]), TCMISDN (clause |
| 107 | // C.2.1.2 of [ITU-T G.993.2]) |
| 108 | // |
| 109 | // - Class 998-CO Annex C of [ITU-T G.993.2]: POTS138co, POTS276co (clause C.2.1.1 of [ITU-T |
| 110 | // G.993.2]) |
| 111 | // |
| 112 | // - Class HPE-M1 Annex B of [ITU-T G.993.2]: HPE17M1-NUS0, HPE30M1NUS0, HPE1230-M1-NUS0, |
| 113 | // HPE1730-M1-NUS0 |
| 114 | // |
| 115 | // Each class is designed such that the PSD levels of each limit PSD mask of a specific class are |
| 116 | // equal in their respective passbands above 552 kHz. |
| 117 | // |
| 118 | // The CLASSMASK attribute is defined per annex of [ITU-T G.993.2] enabled in the xTSE table (see |
| 119 | // Table 9.7.12-1). It selects a single PSD mask class per annex of [ITU-T G.993.2] to be activated |
| 120 | // at the very high-speed digital subscriber line transceiver unit, operator end (VTU-O). The |
| 121 | // coding is as follows: |
| 122 | // |
| 123 | // Vdsl2 Limit Psd Masks |
| 124 | // The LIMITMASK attribute contains the ITU-T G.993.2 limit PSD masks of the selected PSD mask |
| 125 | // class, enabled by the near-end xTU for each class of profiles. One LIMITMASK parameter is |
| 126 | // defined per annex enabled in the xTSE (see Table 9.7.12-1). |
| 127 | // |
| 128 | // The profiles are grouped in the following profile classes: |
| 129 | // |
| 130 | // - Class 8: Profiles 8a, 8b, 8c, 8d |
| 131 | // |
| 132 | // - Class 12: Profiles 12a, 12b |
| 133 | // |
| 134 | // - Class 17: Profile 17a |
| 135 | // |
| 136 | // - Class 30: Profile 30a |
| 137 | // |
| 138 | // For each profile class, several limit PSD masks of the selected PSD mask class (CLASSMASK) may |
| 139 | // be enabled. The enabling attribute is coded in a bit map representation (0 if the associated |
| 140 | // mask is not allowed, 1 if it is allowed). The bit mask is defined in Table 9.7.6-1. (R,-W, |
| 141 | // setbycreate) (mandatory) (8-bytes) |
| 142 | // |
| 143 | // Vdsl2 Us0 Disabling |
| 144 | // The US0DISABLE attribute specifies whether channel US0 is disabled for each limit PSD mask |
| 145 | // enabled in the LIMITMASK attribute. |
| 146 | // |
| 147 | // For each limit PSD mask enabled in the LIMITMASK attribute, one bit indicates if US0 is |
| 148 | // disabled. The disabling attribute is a bit map where the value 1 specifies that US0 is disabled |
| 149 | // for the associated limit mask. The bit map has the same structure as the LIMITMASK attribute. |
| 150 | // (R,-W, setbycreate) (mandatory) (8-bytes) |
| 151 | // |
| 152 | // Vdsl2 Us0 Psd Masks |
| 153 | // The US0MASK attribute contains the US0 PSD masks to be allowed by the xTU-C. This attribute is |
| 154 | // only defined for Annex-A of [ITUT-G.993.2]. It is represented as a bit map (0 if not allowed, 1 |
| 155 | // if allowed) with the definitions of Table-9.7.6-2. (R, W, setbycreate) (mandatory) (4-bytes) |
| 156 | // |
| 157 | // Vdsl2_Carmask Table |
| 158 | // VDSL2-CARMASK table: This attribute specifies restrictions, additional to the band plan, that |
| 159 | // determine the set of subcarriers allowed for transmission in both upstream and downstream |
| 160 | // directions. |
| 161 | // |
| 162 | // The VDSL2-CARMASK attribute describes the not-masked subcarriers in terms of one or more |
| 163 | // frequency bands. Each band is represented by start and stop subcarrier indices with a subcarrier |
| 164 | // spacing of 4.3125-kHz. The valid range of subcarrier indices is from 0 to at least the index of |
| 165 | // the highest allowed subcarrier in both transmission directions among all profiles enabled by the |
| 166 | // VDSL2 profiles enabling (PROFILES) attribute. Up to 32 bands may be specified. Other subcarriers |
| 167 | // are masked. |
| 168 | // |
| 169 | // For profiles using 8.625 kHz tone spacing, the odd subcarrier indices i4.3125 in VDSL2-CARMASK |
| 170 | // can be transformed into actual subcarrier indices i8.625 using the following rule: |
| 171 | // |
| 172 | // - for the start frequency of each band: i8.625-=-(i4.3125 + 1)/2 |
| 173 | // |
| 174 | // - for the stop frequency of each band: i8.625-=-(i4.3125 - 1)/2. |
| 175 | // |
| 176 | // The VDSL2-CARMASK attribute is a table where each entry comprises: |
| 177 | // |
| 178 | // - an entry number field (1-byte, first entry numbered 1); |
| 179 | // |
| 180 | // - band start subcarrier index (2-bytes); |
| 181 | // |
| 182 | // - band stop subcarrier index (2-bytes). |
| 183 | // |
| 184 | // By default, the table is empty. Entries are added or modified using the set action. Setting a |
| 185 | // table entry with non-zero subcarrier references implies insertion into the table. Setting an |
| 186 | // entry's subcarrier references to zero implies deletion from the table, if present. |
| 187 | // |
| 188 | // The maximum number of bands is 32, so the maximum size of the table is 160-bytes. (R,-W) |
| 189 | // (mandatory) (5 * N bytes, where N is the number of bands) |
| 190 | // |
| 191 | // Carmask Valid |
| 192 | // This attribute controls and reports the status of the VDSL2-CARMASK table. If CARMASK valid-= 1, |
| 193 | // then the VDSL2-CARMASK has been effectuated on the xDSL equipment. If CARMASK valid-= 0 |
| 194 | // (default), then the VDSL2-CARMASK table is under construction and has not been effectuated on |
| 195 | // the xDSL equipment. |
| 196 | // |
| 197 | // This attribute behaves as follows. |
| 198 | // |
| 199 | // If the OLT changes any of the VDSL2-CARMASK table entries or sets CARMASK valid-= 0, then |
| 200 | // CARMASK valid-= 0. |
| 201 | // |
| 202 | // If CARMASK valid-= 0 and the OLT sets CARMASK valid-= 1, then the ONU updates the xDSL equipment |
| 203 | // with the contents of the table. |
| 204 | // |
| 205 | // (R,-W) (mandatory) (1-byte) |
| 206 | // |
| 207 | // Upboshaped |
| 208 | // This attribute includes two parameters for each band. The parameters are a and b, in that order. |
| 209 | // Parameter a lies in the range 4000 (40.00-dBm/Hz) to 8095 (80.95-dBm/Hz). Parameter b lies in |
| 210 | // the range 0 (0.00-dBm/Hz) to 4095 (40.95-dBm/Hz). The special values a-= b-= 0 disable UPBO in |
| 211 | // the respective upstream band. |
| 212 | // |
| 213 | // The upstream electrical length parameter UPBOKL defines the electrical length expressed in |
| 214 | // decibels at 1-MHz, kl0, which may also be configured by the OLT. Its value ranges from 0 |
| 215 | // (0.0-dB) to 1280 (128.0-dB). |
| 216 | // |
| 217 | // If the force electrical length parameter UPBOKLF is 1, the very high-speed digital subscriber |
| 218 | // line transceiver unit, remote end (VTU-R) is forced to use the electrical length from this |
| 219 | // attribute (UPBOKL) to compute UPBO. Otherwise, the VDSL2 transceiver units (VTUs) determine the |
| 220 | // electrical length themselves. |
| 221 | // |
| 222 | // (R,-W) (mandatory) (23-bytes) |
| 223 | // |
| 224 | // Upstream power back-off (UPBO) is specified in [ITUT G.993.2] to provide spectral compatibility |
| 225 | // between loops of different lengths deployed in the same cable binder. The upstream transmit PSD |
| 226 | // mask, UPBOMASKus is defined in clause 7.2.1.3.2 of [ITUT G.993.2]. |
| 227 | // |
| 228 | // The ITU-T G.993.2 UPBO configuration attributes a and b are set by the OLT via this attribute. |
| 229 | // The reference length kl0_REF is set by the companion attribute UPBO klREF-pb, defined in the |
| 230 | // following. Further details appear in [ITUT-G.997.1]. |
| 231 | // |
| 232 | // Cyclic Extension |
| 233 | // The CEFLAG attribute enables (1) the optional cyclic extension values. If set to 0, the cyclic |
| 234 | // extension is forced to the mandatory length 5N/32. (R,-W) (mandatory) (1-byte) |
| 235 | // |
| 236 | // Downstream Signal_To_Noise Ratio Snr Mode |
| 237 | // Downstream signal-to-noise ratio (SNR) mode: The SNRMODEds attribute controls transmitter |
| 238 | // referred virtual noise in the downstream direction. If set to 1, virtual noise is disabled. If |
| 239 | // set to 2, virtual noise is enabled. (R,-W) (mandatory) (1-byte) |
| 240 | // |
| 241 | // Upstream Snr Mode |
| 242 | // The SNRMODEus attribute controls transmitter referred virtual noise in the upstream direction. |
| 243 | // If set to 1, virtual noise is disabled. If set to 2, virtual noise is enabled. (R,-W) |
| 244 | // (mandatory) (1-byte) |
| 245 | // |
| 246 | // Transmitter Referred Virtual Noise Downstream Table |
| 247 | // Table entries for this attribute have the default value 254 for the noise PSD level. Entries are |
| 248 | // added or modified using the set action. Setting an entry to a noise PSD level less than or equal |
| 249 | // to 254 implies insertion into the table. Setting an entry's noise PSD level to 255 implies |
| 250 | // deletion from the table, if present. |
| 251 | // |
| 252 | // (R,-W) (optional) (3N bytes, where N is the number of breakpoints) |
| 253 | // |
| 254 | // The TXREFVNds table defines the downstream transmitter referred virtual noise. TXREFVNds is |
| 255 | // specified through a set of breakpoints. Each breakpoint comprises a subcarrier index t, with a |
| 256 | // subcarrier spacing of 4.3125-kHz, and a noise PSD level at that subcarrier. The set of |
| 257 | // breakpoints can then be represented as [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)]. The subcarrier |
| 258 | // index t is an unsigned 2 byte integer. The noise level is 1-byte whose value ranges from 0 |
| 259 | // (-40-dBm/Hz) to 200 (-140-dBm/Hz), in steps of 0.5 dB. Values between 201 and 254 indicate a |
| 260 | // noise PSD level of 0 W/Hz. The maximum number of breakpoints is 32; no more than 15 breakpoints |
| 261 | // may be configured below the upper edge of the passband of every mode enabled for [ITU-T G.992.3] |
| 262 | // and [ITUT-G.992.5]. |
| 263 | // |
| 264 | // Transmitter Referred Virtual Noise Upstream Table |
| 265 | // The TXREFVNus attribute defines the upstream transmitter referred virtual noise. TXREFVNus is |
| 266 | // specified through a set of breakpoints. Each breakpoint comprises a subcarrier index t, with a |
| 267 | // subcarrier spacing of 4.3125-kHz, and a noise PSD level at that subcarrier. The set of |
| 268 | // breakpoints can then be represented as [(t1, PSD1), (t2, PSD2), ..., (tN, PSDN)]. The subcarrier |
| 269 | // index t is an unsigned 2-byte integer. The noise level is 1-byte whose value ranges from 0 |
| 270 | // (-40-dBm/Hz) to 200 (-140-dBm/Hz), in steps of 0.5 dB. Values between 201 and 254 indicate a |
| 271 | // noise PSD level of 0-W/Hz. The maximum number of breakpoints is 16; no more than three |
| 272 | // breakpoints may be configured below the upper edge of the passband of every mode enabled for |
| 273 | // [ITU-T G.992.3] and [ITUT-G.992.5]. |
| 274 | // |
| 275 | // Table entries for this attribute have the default value 254 for the noise PSD level. Entries are |
| 276 | // added or modified using the set action. Setting an entry to a noise PSD level less than or equal |
| 277 | // to 254 implies insertion into the table. Setting an entry's noise PSD level to 255 implies |
| 278 | // deletion from the table, if present. |
| 279 | // |
| 280 | // (R,-W) (optional) (3N bytes, where N is the number of breakpoints) |
| 281 | // |
| 282 | // Dpboshaped |
| 283 | // Downstream power back-off - shaped is described in [ITUT G.997.1] as a vector of parameters that |
| 284 | // modifies the downstream PSD mask. |
| 285 | // |
| 286 | // DPBOEPSD - Assumed exchange PSD mask. This component points to a downstream xDSL PSD mask |
| 287 | // profile ME. The PSD mask profile should contain no more than 16 break points. (2-bytes) |
| 288 | // |
| 289 | // DPBOESEL - E-side electrical length. This component is the assumed loss at some reference |
| 290 | // frequency of the electrical cable from the xDSL equipment to a possible flexibility point. It |
| 291 | // ranges from 0 (0.0-dB) to 511 (255.5-dB) in steps of 0.5-dB. The value 0 has the special meaning |
| 292 | // that it disables the DPBOSHAPED feature. (2-bytes) |
| 293 | // |
| 294 | // The following three parameters describe the cable model. Further details appear in [ITUT |
| 295 | // G.997.1]. Each is a scalar that represents the range -1 (coded as 0) to +1.5 (coded as 640) in |
| 296 | // steps of 1/256. |
| 297 | // |
| 298 | // DPBOESCMA - (2-bytes) |
| 299 | // |
| 300 | // DPBOESCMB - (2-bytes) |
| 301 | // |
| 302 | // DPBOESCMC - (2-bytes) |
| 303 | // |
| 304 | // DPBOMUS - Assumed minimum usable receive PSD mask. This component ranges from 0 (0.0-dBm/Hz) to |
| 305 | // 255 (-127.5-dBm/Hz) in steps of 0.5 dB. (1-byte) |
| 306 | // |
| 307 | // DPBOFMIN - The lower frequency bound above which DPBO is applied. This component ranges from 0 |
| 308 | // (0.00 kHz) to 2048 (8832.00 kHz) in steps of 4.3125 kHz. (2-bytes) |
| 309 | // |
| 310 | // DPBOFMAX - The upper frequency bound below which DPBO is applied. This component ranges from 32 |
| 311 | // (138.00-kHz) to 6956 (29997.75-kHz) in steps of 4.3125-kHz. (2-bytes) |
| 312 | // |
| 313 | // (R,-W) (optional) (15-bytes) |
| 314 | // |
| 315 | // Upboklref_Pb |
| 316 | // UPBOKLREF-pb: This attribute represents the reference loop length, the electrical length used to |
| 317 | // compute upstream power back-off (UPBO) for each upstream band except US0, for the optional |
| 318 | // equalized FEXT UPBO method. The value for each upstream band ranges from 1.8 to 63.5 dB in steps |
| 319 | // of 0.1 dB, i.e., with values 18..635. The special value 0 is also allowed, with semantics as |
| 320 | // defined in clause 7.2.1.3.2 of [ITUT G.993.2]. (R,-W) (optional) (2-bytes * 5 upstream bands) |
| 321 | // |
| 322 | // Upboshaped Aele_Mode, Upboelmt |
| 323 | // UPBOSHAPED (AELE-MODE, UPBOELMT): This attribute defines the UPBO electrical length estimation |
| 324 | // mode (AELE-MODE) and UPBO electrical length minimum threshold percentile (UPBOELMT) to be used |
| 325 | // in the alternative electrical length estimation method (ELE-M1). The format of this attribute is |
| 326 | // given in octet 1 of Table 12-27 of [ITU-T G.993.2]. (R,-W) (optional) (1-byte) |
| 327 | // |
| 328 | type Vdsl2LineConfigurationExtensions struct { |
| 329 | ManagedEntityDefinition |
| 330 | Attributes AttributeValueMap |
| 331 | } |
| 332 | |
| 333 | func init() { |
| 334 | vdsl2lineconfigurationextensionsBME = &ManagedEntityDefinition{ |
| 335 | Name: "Vdsl2LineConfigurationExtensions", |
| 336 | ClassID: 165, |
| 337 | MessageTypes: mapset.NewSetWith( |
| 338 | Create, |
| 339 | Delete, |
| 340 | Get, |
| 341 | GetNext, |
| 342 | Set, |
| 343 | SetTable, |
| 344 | ), |
| 345 | AllowedAttributeMask: 0xffff, |
| 346 | AttributeDefinitions: AttributeDefinitionMap{ |
| 347 | 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 348 | 1: ByteField("Vdsl2ProfilesEnabling", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1), |
| 349 | 2: ByteField("Vdsl2PsdMaskClassSelectionClassmask", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 350 | 3: Uint64Field("Vdsl2LimitPsdMasks", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3), |
| 351 | 4: Uint64Field("Vdsl2Us0Disabling", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4), |
| 352 | 5: Uint32Field("Vdsl2Us0PsdMasks", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5), |
| 353 | 6: TableField("Vdsl2CarmaskTable", TableAttributeType, 0x0400, TableInfo{nil, 5}, mapset.NewSetWith(Read, Write), false, false, false, 6), |
| 354 | 7: ByteField("CarmaskValid", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7), |
| 355 | 8: MultiByteField("Upboshaped", OctetsAttributeType, 0x0100, 23, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA="), mapset.NewSetWith(Read, Write), false, false, false, 8), |
| 356 | 9: ByteField("CyclicExtension", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9), |
| 357 | 10: ByteField("DownstreamSignalToNoiseRatioSnrMode", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, false, false, 10), |
| 358 | 11: ByteField("UpstreamSnrMode", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11), |
| 359 | 12: TableField("TransmitterReferredVirtualNoiseDownstreamTable", TableAttributeType, 0x0010, TableInfo{nil, 3}, mapset.NewSetWith(Read, Write), false, true, false, 12), |
| 360 | 13: TableField("TransmitterReferredVirtualNoiseUpstreamTable", TableAttributeType, 0x0008, TableInfo{nil, 3}, mapset.NewSetWith(Read, Write), false, true, false, 13), |
| 361 | 14: MultiByteField("Dpboshaped", OctetsAttributeType, 0x0004, 15, toOctets("AAAAAAAAAAAAAAAAAAAA"), mapset.NewSetWith(Read, Write), false, true, false, 14), |
| 362 | 15: Uint16Field("UpboklrefPb", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15), |
| 363 | 16: ByteField("UpboshapedAeleMode,Upboelmt", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), false, true, false, 16), |
| 364 | }, |
| 365 | Access: CreatedByOlt, |
| 366 | Support: UnknownSupport, |
| 367 | } |
| 368 | } |
| 369 | |
| 370 | // NewVdsl2LineConfigurationExtensions (class ID 165) creates the basic |
| 371 | // Managed Entity definition that is used to validate an ME of this type that |
| 372 | // is received from or transmitted to the OMCC. |
| 373 | func NewVdsl2LineConfigurationExtensions(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| 374 | return NewManagedEntity(*vdsl2lineconfigurationextensionsBME, params...) |
| 375 | } |