| |
| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| |
| import sys |
| import copy |
| import logging |
| import types |
| import time |
| import re |
| from Queue import Queue |
| |
| import packet as scapy |
| |
| import oftest |
| import oftest.controller |
| import oftest.dataplane |
| import oftest.parse |
| import oftest.ofutils |
| import ofp |
| |
| global skipped_test_count |
| skipped_test_count = 0 |
| |
| _import_blacklist = set(locals().keys()) |
| |
| # Some useful defines |
| IP_ETHERTYPE = 0x800 |
| TCP_PROTOCOL = 0x6 |
| UDP_PROTOCOL = 0x11 |
| |
| MINSIZE = 0 |
| |
| def delete_all_flows(ctrl, send_barrier=True): |
| """ |
| Delete all flows on the switch |
| @param ctrl The controller object for the test |
| @param send_barrier Whether or not to send a barrier message |
| """ |
| |
| logging.info("Deleting all flows") |
| msg = ofp.message.flow_delete() |
| if ofp.OFP_VERSION in [1, 2]: |
| msg.match.wildcards = ofp.OFPFW_ALL |
| msg.out_port = ofp.OFPP_NONE |
| msg.buffer_id = 0xffffffff |
| elif ofp.OFP_VERSION >= 3: |
| msg.table_id = ofp.OFPTT_ALL |
| msg.buffer_id = ofp.OFP_NO_BUFFER |
| msg.out_port = ofp.OFPP_ANY |
| msg.out_group = ofp.OFPG_ANY |
| ctrl.message_send(msg) |
| if send_barrier: |
| do_barrier(ctrl) |
| return 0 # for backwards compatibility |
| |
| def delete_all_groups(ctrl): |
| """ |
| Delete all groups on the switch |
| @param ctrl The controller object for the test |
| """ |
| |
| logging.info("Deleting all groups") |
| msg = ofp.message.group_delete(group_id=ofp.OFPG_ALL) |
| ctrl.message_send(msg) |
| do_barrier(ctrl) |
| |
| def delete_groups(ctrl, group_queue=Queue()): |
| """ |
| Delete all groups on list |
| @param ctrl The controller object for the test |
| :param group_queue: |
| """ |
| logging.info("Deleting groups") |
| while (not group_queue.empty()): |
| msg = ofp.message.group_delete(group_id=group_queue.get()) |
| ctrl.message_send(msg) |
| do_barrier(ctrl) |
| |
| def delete_group(ctrl, group_id): |
| """ |
| Delete a single group |
| @param ctrl The controller object for the test |
| :param group_id |
| """ |
| logging.info("Deleting a single group with groupId:" + str(group_id)) |
| msg = ofp.message.group_delete(group_id=group_id) |
| ctrl.message_send(msg) |
| do_barrier(ctrl) |
| |
| def required_wildcards(parent): |
| w = test_param_get('required_wildcards', default='default') |
| if w == 'l3-l4': |
| return (ofp.OFPFW_NW_SRC_ALL | ofp.OFPFW_NW_DST_ALL | ofp.OFPFW_NW_TOS |
| | ofp.OFPFW_NW_PROTO | ofp.OFPFW_TP_SRC | ofp.OFPFW_TP_DST) |
| else: |
| return 0 |
| |
| def simple_packet(content='00 00 00 11 33 55 00 00 00 11 22 33 81 00 00 03 ' |
| '08 00 45 00 00 2e 04 d2 00 00 7f 00 b2 47 c0 a8 ' |
| '01 64 c0 a8 02 02 00 00 00 00 00 00 00 00 00 00 ' |
| '00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00'): |
| |
| pkt = ''.join(content.split(" ")).decode('hex') |
| pkt = scapy.Ether(pkt) |
| if len(pkt) < 64: |
| pkt = pkt/("D" * (64 - len(pkt))) |
| #scapy.hexdump(pkt) |
| return pkt |
| |
| def simple_tcp_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| outer_vlan=None, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| tcp_sport=1234, |
| tcp_dport=80, |
| tcp_flags="S", |
| ip_ihl=None, |
| ip_options=False |
| ): |
| """ |
| Return a simple dataplane TCP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destinatino MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ip_src IP source |
| @param ip_dst IP destination |
| @param ip_tos IP ToS |
| @param ip_ttl IP TTL |
| @param tcp_dport TCP destination port |
| @param tcp_sport TCP source port |
| @param tcp_flags TCP Control flags |
| |
| Generates a simple TCP request. Users |
| shouldn't assume anything about this packet other than that |
| it is a valid ethernet/IP/TCP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| # Note Dot1Q.id is really CFI |
| if (dl_vlan_enable): |
| pkt = scapy.Ether( dst=eth_dst, src=eth_src ) |
| if outer_vlan: |
| pkt = pkt/scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=outer_vlan) |
| |
| pkt = pkt/scapy.Dot1Q( prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid )/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| else: |
| if not ip_options: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl, options=ip_options)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| |
| pkt = pkt/("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_tcpv6_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| ipv6_src='2001:db8:85a3::8a2e:370:7334', |
| ipv6_dst='2001:db8:85a3::8a2e:370:7335', |
| ipv6_tc=0, |
| ipv6_hlim=64, |
| ipv6_fl=0, |
| tcp_sport=1234, |
| tcp_dport=80, |
| tcp_flags="S"): |
| """ |
| Return a simple IPv6/TCP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destination MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ipv6_src IPv6 source |
| @param ipv6_dst IPv6 destination |
| @param ipv6_tc IPv6 traffic class |
| @param ipv6_ttl IPv6 hop limit |
| @param ipv6_fl IPv6 flow label |
| @param tcp_dport TCP destination port |
| @param tcp_sport TCP source port |
| @param tcp_flags TCP Control flags |
| |
| Generates a simple TCP request. Users shouldn't assume anything about this |
| packet other than that it is a valid ethernet/IPv6/TCP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| if dl_vlan_enable or vlan_vid or vlan_pcp: |
| pkt /= scapy.Dot1Q(vlan=vlan_vid, prio=vlan_pcp) |
| pkt /= scapy.IPv6(src=ipv6_src, dst=ipv6_dst, fl=ipv6_fl, tc=ipv6_tc, hlim=ipv6_hlim) |
| pkt /= scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| pkt /= ("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_udp_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| udp_sport=1234, |
| udp_dport=80, |
| ip_ihl=None, |
| ip_options=False |
| ): |
| """ |
| Return a simple dataplane UDP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destination MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ip_src IP source |
| @param ip_dst IP destination |
| @param ip_tos IP ToS |
| @param ip_ttl IP TTL |
| @param udp_dport UDP destination port |
| @param udp_sport UDP source port |
| |
| Generates a simple UDP packet. Users shouldn't assume anything about |
| this packet other than that it is a valid ethernet/IP/UDP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| # Note Dot1Q.id is really CFI |
| if (dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.UDP(sport=udp_sport, dport=udp_dport) |
| else: |
| if not ip_options: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.UDP(sport=udp_sport, dport=udp_dport) |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl, options=ip_options)/ \ |
| scapy.UDP(sport=udp_sport, dport=udp_dport) |
| |
| pkt = pkt/("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| |
| def simple_tcp_packet_two_vlan(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| out_dl_vlan_enable=False, |
| in_dl_vlan_enable=False, |
| out_vlan_vid=0, |
| out_vlan_pcp=0, |
| out_vlan_tpid=0x8100, |
| out_dl_vlan_cfi=0, |
| in_vlan_vid=0, |
| in_vlan_pcp=0, |
| in_dl_vlan_cfi=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| tcp_sport=1234, |
| tcp_dport=80, |
| tcp_flags="S", |
| ip_ihl=None, |
| ip_options=False |
| ): |
| """ |
| Return a simple dataplane TCP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destinatino MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ip_src IP source |
| @param ip_dst IP destination |
| @param ip_tos IP ToS |
| @param ip_ttl IP TTL |
| @param tcp_dport TCP destination port |
| @param tcp_sport TCP source port |
| @param tcp_flags TCP Control flags |
| |
| Generates a simple TCP request. Users |
| shouldn't assume anything about this packet other than that |
| it is a valid ethernet/IP/TCP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| # Note Dot1Q.id is really CFI |
| if (out_dl_vlan_enable and in_dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src, type=out_vlan_tpid)/ \ |
| scapy.Dot1Q(prio=out_vlan_pcp, id=out_dl_vlan_cfi, vlan=out_vlan_vid) |
| |
| if in_dl_vlan_enable: |
| pkt = pkt/scapy.Dot1Q(prio=in_vlan_pcp, id=in_dl_vlan_cfi, vlan=in_vlan_vid) |
| |
| pkt = pkt/scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| elif (out_dl_vlan_enable and (not in_dl_vlan_enable)): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=out_vlan_pcp, id=out_dl_vlan_cfi, vlan=out_vlan_vid)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| elif ((not out_dl_vlan_enable) and in_dl_vlan_enable): |
| assert(0) #shall not have this caes |
| else: |
| if not ip_options: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl, options=ip_options)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| |
| pkt = pkt/("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_vxlan_packet(eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| udp_sport=1234, |
| udp_dport=4789, |
| vnid=1, |
| inner_payload=None, |
| ip_ihl=None, |
| ip_options=False |
| ): |
| """ |
| Return a simple dataplane UDP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destination MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ip_src IP source |
| @param ip_dst IP destination |
| @param ip_tos IP ToS |
| @param ip_ttl IP TTL |
| @param udp_dport UDP destination port |
| @param udp_sport UDP source port |
| @param inner_pyload inner pacekt content |
| Generates a simple UDP packet. Users shouldn't assume anything about |
| this packet other than that it is a valid ethernet/IP/UDP frame. |
| """ |
| |
| # Note Dot1Q.id is really CFI |
| if (dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.UDP(sport=udp_sport, dport=udp_dport) |
| else: |
| if not ip_options: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.UDP(sport=udp_sport, dport=udp_dport) |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl, options=ip_options)/ \ |
| scapy.UDP(sport=udp_sport, dport=udp_dport) |
| |
| #add vxlan header |
| pkt = pkt/scapy.VXLAN(vni=vnid) |
| #add innder payload |
| if inner_payload!=None: |
| pkt=pkt/inner_payload |
| |
| return pkt |
| |
| def mpls_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| tcp_sport=1234, |
| tcp_dport=80, |
| tcp_flags="S", |
| ip_ihl=None, |
| ip_options=False, |
| label=None, |
| inner_payload=True, |
| encapsulated_ethernet=False, |
| encapsulated_eth_src='01:02:03:04:05:11', |
| encapsulated_eth_dst='01:02:03:04:05:22' |
| ): |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| # Note Dot1Q.id is really CFI |
| if (dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid) |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| |
| #add MPLS header |
| for i in range(len(label)): |
| l,c,s,t=label[i] |
| pkt = pkt/scapy.MPLS(label=l, cos=c, s=s, ttl=t) |
| |
| #add innder payload |
| if inner_payload!=None: |
| if not encapsulated_ethernet: |
| pkt=pkt / \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| else: |
| pkt=pkt / \ |
| scapy.Ether(dst=encapsulated_eth_dst, src=encapsulated_eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| |
| pkt = pkt/("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def pw_packet(pktlen=100, |
| out_eth_dst='00:01:02:03:04:05', |
| out_eth_src='00:06:07:08:09:0a', |
| label=None, |
| cw=None, |
| in_eth_dst='00:01:02:03:04:05', |
| in_eth_src='00:06:07:08:09:0a', |
| out_dl_vlan_enable=False, |
| in_dl_vlan_enable=False, |
| out_vlan_vid=0, |
| out_vlan_pcp=0, |
| out_dl_vlan_cfi=0, |
| in_vlan_vid=0, |
| in_vlan_pcp=0, |
| in_dl_vlan_cfi=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| tcp_sport=1234, |
| tcp_dport=80, |
| tcp_flags="S", |
| ip_ihl=None, |
| ip_options=False |
| ): |
| """ |
| Return a simple dataplane TCP packet encapsulated |
| in a pw packet |
| """ |
| |
| # Add the outer ethernet header |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| pkt = scapy.Ether(dst=out_eth_dst, src=out_eth_src) |
| |
| #add MPLS header |
| for i in range(len(label)): |
| l,c,s,t=label[i] |
| pkt = pkt/scapy.MPLS(label=l, cos=c, s=s, ttl=t) |
| |
| #add the PW CW |
| l,c,s,t=cw |
| pkt = pkt/scapy.MPLS(label=l, cos=c, s=s, ttl=t) |
| |
| # Note Dot1Q.id is really CFI |
| if (out_dl_vlan_enable and in_dl_vlan_enable): |
| |
| pkt = pkt/scapy.Ether(dst=in_eth_dst, src=in_eth_src)/ \ |
| scapy.Dot1Q(prio=out_vlan_pcp, id=out_dl_vlan_cfi, vlan=out_vlan_vid) |
| |
| pkt = pkt/scapy.Dot1Q(prio=in_vlan_pcp, id=in_dl_vlan_cfi, vlan=in_vlan_vid) |
| |
| pkt = pkt/scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| |
| elif (out_dl_vlan_enable and (not in_dl_vlan_enable)): |
| |
| pkt = pkt/scapy.Ether(dst=in_eth_dst, src=in_eth_src)/ \ |
| scapy.Dot1Q(prio=out_vlan_pcp, id=out_dl_vlan_cfi, vlan=out_vlan_vid)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| |
| elif ((not out_dl_vlan_enable) and in_dl_vlan_enable): |
| |
| assert(0) #shall not have this caes |
| |
| else: |
| if not ip_options: |
| pkt = pkt/scapy.Ether(dst=in_eth_dst, src=in_eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| else: |
| pkt = pkt/scapy.Ether(dst=in_eth_dst, src=in_eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl, options=ip_options)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| |
| pkt = pkt/("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def mplsv6_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| ipv6_src='2001:db8:85a3::8a2e:370:7334', |
| ipv6_dst='2001:db8:85a3::8a2e:370:7335', |
| ipv6_tc=0, |
| ipv6_hlim=64, |
| ipv6_fl=0, |
| tcp_sport=1234, |
| tcp_dport=80, |
| tcp_flags="S", |
| label=None, |
| inner_payload=True |
| ): |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| # Note Dot1Q.id is really CFI |
| if (dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid) |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| |
| #add MPLS header |
| for i in range(len(label)): |
| l,c,s,t=label[i] |
| pkt = pkt/scapy.MPLS(label=l, cos=c, s=s, ttl=t) |
| |
| #add innder payload |
| if inner_payload!=None: |
| pkt=pkt / \ |
| scapy.IPv6(src=ipv6_src, dst=ipv6_dst, fl=ipv6_fl, tc=ipv6_tc, hlim=ipv6_hlim)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport, flags=tcp_flags) |
| |
| pkt = pkt/("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_mpls_packet(eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| label=None, |
| inner_payload=None |
| ): |
| """ |
| Return a simple dataplane MPLS packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destination MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param inner_pyload inner pacekt content |
| Generates a simple MPLS packet. Users shouldn't assume anything about |
| this packet other than that it is a valid ethernet/IP/UDP frame. |
| """ |
| |
| # Note Dot1Q.id is really CFI |
| if (dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid) |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| |
| #add MPLS header |
| for i in range(len(label)): |
| l,c,s,t=label[i] |
| pkt = pkt/scapy.MPLS(label=l, cos=c, s=s, ttl=t) |
| |
| #add innder payload |
| if inner_payload!=None: |
| pkt=pkt/inner_payload |
| |
| return pkt |
| |
| def simple_udpv6_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| ipv6_src='2001:db8:85a3::8a2e:370:7334', |
| ipv6_dst='2001:db8:85a3::8a2e:370:7335', |
| ipv6_tc=0, |
| ipv6_hlim=64, |
| ipv6_fl=0, |
| udp_sport=1234, |
| udp_dport=80): |
| """ |
| Return a simple IPv6/UDP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destination MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ipv6_src IPv6 source |
| @param ipv6_dst IPv6 destination |
| @param ipv6_tc IPv6 traffic class |
| @param ipv6_ttl IPv6 hop limit |
| @param ipv6_fl IPv6 flow label |
| @param udp_dport UDP destination port |
| @param udp_sport UDP source port |
| |
| Generates a simple UDP request. Users shouldn't assume anything about this |
| packet other than that it is a valid ethernet/IPv6/UDP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| if dl_vlan_enable or vlan_vid or vlan_pcp: |
| pkt /= scapy.Dot1Q(vlan=vlan_vid, prio=vlan_pcp) |
| pkt /= scapy.IPv6(src=ipv6_src, dst=ipv6_dst, fl=ipv6_fl, tc=ipv6_tc, hlim=ipv6_hlim) |
| pkt /= scapy.UDP(sport=udp_sport, dport=udp_dport) |
| pkt /= ("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_icmp_packet(pktlen=60, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| ip_id=1, |
| icmp_type=8, |
| icmp_code=0, |
| icmp_data=''): |
| """ |
| Return a simple ICMP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destinatino MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ip_src IP source |
| @param ip_dst IP destination |
| @param ip_tos IP ToS |
| @param ip_ttl IP TTL |
| @param ip_id IP Identification |
| @param icmp_type ICMP type |
| @param icmp_code ICMP code |
| @param icmp_data ICMP data |
| |
| Generates a simple ICMP ECHO REQUEST. Users |
| shouldn't assume anything about this packet other than that |
| it is a valid ethernet/ICMP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| if (dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=vlan_pcp, id=0, vlan=vlan_vid)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, ttl=ip_ttl, tos=ip_tos, id=ip_id)/ \ |
| scapy.ICMP(type=icmp_type, code=icmp_code)/ icmp_data |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, ttl=ip_ttl, tos=ip_tos, id=ip_id)/ \ |
| scapy.ICMP(type=icmp_type, code=icmp_code)/ icmp_data |
| |
| pkt = pkt/("0" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_icmpv6_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_enable=False, |
| vlan_vid=0, |
| vlan_pcp=0, |
| ipv6_src='2001:db8:85a3::8a2e:370:7334', |
| ipv6_dst='2001:db8:85a3::8a2e:370:7335', |
| ipv6_tc=0, |
| ipv6_hlim=64, |
| ipv6_fl=0, |
| icmp_type=8, |
| icmp_code=0): |
| """ |
| Return a simple ICMPv6 packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destination MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| @param ipv6_src IPv6 source |
| @param ipv6_dst IPv6 destination |
| @param ipv6_tc IPv6 traffic class |
| @param ipv6_ttl IPv6 hop limit |
| @param ipv6_fl IPv6 flow label |
| @param icmp_type ICMP type |
| @param icmp_code ICMP code |
| |
| Generates a simple ICMP ECHO REQUEST. Users shouldn't assume anything |
| about this packet other than that it is a valid ethernet/IPv6/ICMP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| if dl_vlan_enable or vlan_vid or vlan_pcp: |
| pkt /= scapy.Dot1Q(vlan=vlan_vid, prio=vlan_pcp) |
| pkt /= scapy.IPv6(src=ipv6_src, dst=ipv6_dst, fl=ipv6_fl, tc=ipv6_tc, hlim=ipv6_hlim) |
| pkt /= scapy.ICMPv6Unknown(type=icmp_type, code=icmp_code) |
| pkt /= ("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_arp_packet(pktlen=60, |
| eth_dst='ff:ff:ff:ff:ff:ff', |
| eth_src='00:06:07:08:09:0a', |
| vlan_vid=0, |
| vlan_pcp=0, |
| arp_op=1, |
| ip_snd='192.168.0.1', |
| ip_tgt='192.168.0.2', |
| hw_snd='00:06:07:08:09:0a', |
| hw_tgt='00:00:00:00:00:00', |
| ): |
| """ |
| Return a simple ARP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destinatino MAC |
| @param eth_src Source MAC |
| @param arp_op Operation (1=request, 2=reply) |
| @param ip_snd Sender IP |
| @param ip_tgt Target IP |
| @param hw_snd Sender hardware address |
| @param hw_tgt Target hardware address |
| |
| Generates a simple ARP REQUEST. Users |
| shouldn't assume anything about this packet other than that |
| it is a valid ethernet/ARP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| if vlan_vid or vlan_pcp: |
| pkt /= scapy.Dot1Q(vlan=vlan_vid, prio=vlan_pcp) |
| pkt /= scapy.ARP(hwsrc=hw_snd, hwdst=hw_tgt, pdst=ip_tgt, psrc=ip_snd, op=arp_op) |
| |
| pkt = pkt/("\0" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def simple_eth_packet(pktlen=60, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| eth_type=0x88cc): |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src, type=eth_type) |
| |
| pkt = pkt/("0" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def qinq_tcp_packet(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_outer=20, |
| dl_vlan_pcp_outer=0, |
| dl_vlan_cfi_outer=0, |
| vlan_vid=10, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| ip_src='192.168.0.1', |
| ip_dst='192.168.0.2', |
| ip_tos=0, |
| ip_ttl=64, |
| tcp_sport=1234, |
| tcp_dport=80, |
| ip_ihl=None, |
| ip_options=False |
| ): |
| """ |
| Return a doubly tagged dataplane TCP packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destinatino MAC |
| @param eth_src Source MAC |
| @param dl_vlan_outer Outer VLAN ID |
| @param dl_vlan_pcp_outer Outer VLAN priority |
| @param dl_vlan_cfi_outer Outer VLAN cfi bit |
| @param vlan_vid Inner VLAN ID |
| @param vlan_pcp VLAN priority |
| @param dl_vlan_cfi VLAN cfi bit |
| @param ip_src IP source |
| @param ip_dst IP destination |
| @param ip_tos IP ToS |
| @param tcp_dport TCP destination port |
| @param ip_sport TCP source port |
| |
| Generates a TCP request. Users |
| shouldn't assume anything about this packet other than that |
| it is a valid ethernet/IP/TCP frame. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| # Note Dot1Q.id is really CFI |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src)/ \ |
| scapy.Dot1Q(prio=dl_vlan_pcp_outer, id=dl_vlan_cfi_outer, vlan=dl_vlan_outer)/ \ |
| scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid)/ \ |
| scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ttl=ip_ttl, ihl=ip_ihl)/ \ |
| scapy.TCP(sport=tcp_sport, dport=tcp_dport) |
| |
| pkt = pkt/("D" * (pktlen - len(pkt))) |
| |
| return pkt |
| |
| def qinq_packet(pktlen=100, |
| type=0x0800, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| dl_vlan_outer=20, |
| dl_vlan_pcp_outer=0, |
| dl_vlan_cfi_outer=0, |
| vlan_vid=10, |
| vlan_pcp=0, |
| dl_vlan_cfi=0, |
| ): |
| """ |
| Return a doubly tagged dataplane qinq packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param type ethernet type |
| @param eth_dst Destinatino MAC |
| @param eth_src Source MAC |
| @param dl_vlan_outer Outer VLAN ID |
| @param dl_vlan_pcp_outer Outer VLAN priority |
| @param dl_vlan_cfi_outer Outer VLAN cfi bit |
| @param vlan_vid Inner VLAN ID |
| @param vlan_pcp VLAN priority |
| @param dl_vlan_cfi VLAN cfi bit |
| |
| Generates a qinq request. |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| # Note Dot1Q.id is really CFI |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src, type=type) / \ |
| scapy.Dot1Q(prio=dl_vlan_pcp_outer, id=dl_vlan_cfi_outer, vlan=dl_vlan_outer) / \ |
| scapy.Dot1Q(prio=vlan_pcp, id=dl_vlan_cfi, vlan=vlan_vid) / \ |
| scapy.IP() |
| |
| pkt = pkt / ("D" * (pktlen - len(pkt))) |
| return pkt |
| |
| def simple_ether_packet_two_vlan(pktlen=100, |
| eth_dst='00:01:02:03:04:05', |
| eth_src='00:06:07:08:09:0a', |
| out_dl_vlan_enable=True, |
| in_dl_vlan_enable=True, |
| out_vlan_vid=100, |
| out_vlan_pcp=0, |
| out_vlan_tpid=0x8100, |
| out_dl_vlan_cfi=0, |
| in_vlan_vid=100, |
| in_vlan_pcp=0, |
| in_vlan_tpid=0x0800, |
| in_dl_vlan_cfi=0): |
| """ |
| Return a simple dataplane ether packet |
| |
| Supports a few parameters: |
| @param len Length of packet in bytes w/o CRC |
| @param eth_dst Destinatino MAC |
| @param eth_src Source MAC |
| @param dl_vlan_enable True if the packet is with vlan, False otherwise |
| @param vlan_vid VLAN ID |
| @param vlan_pcp VLAN priority |
| """ |
| |
| if MINSIZE > pktlen: |
| pktlen = MINSIZE |
| |
| if (out_dl_vlan_enable and in_dl_vlan_enable): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src, type=out_vlan_tpid) / \ |
| scapy.Dot1Q(prio=out_vlan_pcp, id=out_dl_vlan_cfi, vlan=out_vlan_vid) |
| pkt = pkt / scapy.Dot1Q(prio=in_vlan_pcp, id=in_dl_vlan_cfi, vlan=in_vlan_vid, type=in_vlan_tpid) |
| |
| elif (out_dl_vlan_enable and (not in_dl_vlan_enable)): |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) / \ |
| scapy.Dot1Q(prio=out_vlan_pcp, id=out_dl_vlan_cfi, vlan=out_vlan_vid) |
| |
| elif ((not out_dl_vlan_enable) and in_dl_vlan_enable): |
| assert (0) # shall not have this case |
| else: |
| pkt = scapy.Ether(dst=eth_dst, src=eth_src) |
| |
| pkt = pkt / ("D" * (pktlen - len(pkt))) |
| return pkt |
| |
| |
| def do_barrier(ctrl, timeout=-1): |
| """ |
| Do a barrier command |
| Return 0 on success, -1 on error |
| """ |
| b = ofp.message.barrier_request() |
| (resp, pkt) = ctrl.transact(b, timeout=timeout) |
| if resp is None: |
| raise AssertionError("barrier failed") |
| # We'll trust the transaction processing in the controller that xid matched |
| return 0 # for backwards compatibility |
| |
| def port_config_get(controller, port_no): |
| """ |
| Get a port's configuration |
| |
| Gets the switch feature configuration and grabs one port's |
| configuration |
| |
| @returns (hwaddr, config, advert) The hwaddress, configuration and |
| advertised values |
| """ |
| |
| if ofp.OFP_VERSION <= 3: |
| request = ofp.message.features_request() |
| reply, _ = controller.transact(request) |
| if reply is None: |
| logging.warn("Get feature request failed") |
| return None, None, None |
| logging.debug(reply.show()) |
| ports = reply.ports |
| else: |
| request = ofp.message.port_desc_stats_request() |
| # TODO do multipart correctly |
| reply, _ = controller.transact(request) |
| if reply is None: |
| logging.warn("Port desc stats request failed") |
| return None, None, None |
| logging.debug(reply.show()) |
| ports = reply.entries |
| |
| for port in ports: |
| if port.port_no == port_no: |
| return (port.hw_addr, port.config, port.advertised) |
| |
| logging.warn("Did not find port number for port config") |
| return None, None, None |
| |
| def port_config_set(controller, port_no, config, mask): |
| """ |
| Set the port configuration according the given parameters |
| |
| Gets the switch feature configuration and updates one port's |
| configuration value according to config and mask |
| """ |
| logging.info("Setting port " + str(port_no) + " to config " + str(config)) |
| |
| hw_addr, _, _ = port_config_get(controller, port_no) |
| |
| mod = ofp.message.port_mod() |
| mod.port_no = port_no |
| if hw_addr != None: |
| mod.hw_addr = hw_addr |
| mod.config = config |
| mod.mask = mask |
| mod.advertise = 0 # No change |
| controller.message_send(mod) |
| return 0 |
| |
| def receive_pkt_check(dp, pkt, yes_ports, no_ports, assert_if): |
| """ |
| Check for proper receive packets across all ports |
| @param dp The dataplane object |
| @param pkt Expected packet; may be None if yes_ports is empty |
| @param yes_ports Set or list of ports that should recieve packet |
| @param no_ports Set or list of ports that should not receive packet |
| @param assert_if Object that implements assertXXX |
| |
| DEPRECATED in favor in verify_packets |
| """ |
| |
| exp_pkt_arg = None |
| if oftest.config["relax"]: |
| exp_pkt_arg = pkt |
| |
| for ofport in yes_ports: |
| logging.debug("Checking for pkt on port " + str(ofport)) |
| (rcv_port, rcv_pkt, pkt_time) = dp.poll( |
| port_number=ofport, exp_pkt=exp_pkt_arg) |
| assert_if.assertTrue(rcv_pkt is not None, |
| "Did not receive pkt on " + str(ofport)) |
| if not oftest.dataplane.match_exp_pkt(pkt, rcv_pkt): |
| logging.debug("Expected %s" % format_packet(pkt)) |
| logging.debug("Received %s" % format_packet(rcv_pkt)) |
| assert_if.assertTrue(oftest.dataplane.match_exp_pkt(pkt, rcv_pkt), |
| "Received packet does not match expected packet " + |
| "on port " + str(ofport)) |
| if len(no_ports) > 0: |
| time.sleep(oftest.ofutils.default_negative_timeout) |
| for ofport in no_ports: |
| logging.debug("Negative check for pkt on port " + str(ofport)) |
| (rcv_port, rcv_pkt, pkt_time) = dp.poll( |
| port_number=ofport, timeout=0, exp_pkt=exp_pkt_arg) |
| assert_if.assertTrue(rcv_pkt is None, |
| "Unexpected pkt on port " + str(ofport)) |
| |
| |
| def receive_pkt_verify(parent, egr_ports, exp_pkt, ing_port): |
| """ |
| Receive a packet and verify it matches an expected value |
| @param egr_port A single port or list of ports |
| |
| parent must implement dataplane, assertTrue and assertEqual |
| |
| DEPRECATED in favor in verify_packets |
| """ |
| exp_pkt_arg = None |
| if oftest.config["relax"]: |
| exp_pkt_arg = exp_pkt |
| |
| if type(egr_ports) == type([]): |
| egr_port_list = egr_ports |
| else: |
| egr_port_list = [egr_ports] |
| |
| # Expect a packet from each port on egr port list |
| for egr_port in egr_port_list: |
| check_port = egr_port |
| if egr_port == ofp.OFPP_IN_PORT: |
| check_port = ing_port |
| (rcv_port, rcv_pkt, pkt_time) = parent.dataplane.poll( |
| port_number=check_port, exp_pkt=exp_pkt_arg) |
| |
| if rcv_pkt is None: |
| logging.error("ERROR: No packet received from " + |
| str(check_port)) |
| |
| parent.assertTrue(rcv_pkt is not None, |
| "Did not receive packet port " + str(check_port)) |
| logging.debug("Packet len " + str(len(rcv_pkt)) + " in on " + |
| str(rcv_port)) |
| |
| if str(exp_pkt) != str(rcv_pkt): |
| logging.error("ERROR: Packet match failed.") |
| logging.debug("Expected len " + str(len(exp_pkt)) + ": " |
| + str(exp_pkt).encode('hex')) |
| logging.debug("Received len " + str(len(rcv_pkt)) + ": " |
| + str(rcv_pkt).encode('hex')) |
| logging.debug("Expected packet: " + inspect_packet(scapy.Ether(str(exp_pkt)))) |
| logging.debug("Received packet: " + inspect_packet(scapy.Ether(str(rcv_pkt)))) |
| parent.assertEqual(str(exp_pkt), str(rcv_pkt), |
| "Packet match error on port " + str(check_port)) |
| |
| def match_verify(parent, req_match, res_match): |
| """ |
| Verify flow matches agree; if they disagree, report where |
| |
| parent must implement assertEqual |
| Use str() to ensure content is compared and not pointers |
| """ |
| |
| parent.assertEqual(req_match.wildcards, res_match.wildcards, |
| 'Match failed: wildcards: ' + hex(req_match.wildcards) + |
| " != " + hex(res_match.wildcards)) |
| parent.assertEqual(req_match.in_port, res_match.in_port, |
| 'Match failed: in_port: ' + str(req_match.in_port) + |
| " != " + str(res_match.in_port)) |
| parent.assertEqual(str(req_match.eth_src), str(res_match.eth_src), |
| 'Match failed: eth_src: ' + str(req_match.eth_src) + |
| " != " + str(res_match.eth_src)) |
| parent.assertEqual(str(req_match.eth_dst), str(res_match.eth_dst), |
| 'Match failed: eth_dst: ' + str(req_match.eth_dst) + |
| " != " + str(res_match.eth_dst)) |
| parent.assertEqual(req_match.vlan_vid, res_match.vlan_vid, |
| 'Match failed: vlan_vid: ' + str(req_match.vlan_vid) + |
| " != " + str(res_match.vlan_vid)) |
| parent.assertEqual(req_match.vlan_pcp, res_match.vlan_pcp, |
| 'Match failed: vlan_pcp: ' + |
| str(req_match.vlan_pcp) + " != " + |
| str(res_match.vlan_pcp)) |
| parent.assertEqual(req_match.eth_type, res_match.eth_type, |
| 'Match failed: eth_type: ' + str(req_match.eth_type) + |
| " != " + str(res_match.eth_type)) |
| |
| if (not(req_match.wildcards & ofp.OFPFW_DL_TYPE) |
| and (req_match.eth_type == IP_ETHERTYPE)): |
| parent.assertEqual(req_match.ip_dscp, res_match.ip_dscp, |
| 'Match failed: ip_dscp: ' + str(req_match.ip_dscp) + |
| " != " + str(res_match.ip_dscp)) |
| parent.assertEqual(req_match.ip_proto, res_match.ip_proto, |
| 'Match failed: ip_proto: ' + str(req_match.ip_proto) + |
| " != " + str(res_match.ip_proto)) |
| parent.assertEqual(req_match.ipv4_src, res_match.ipv4_src, |
| 'Match failed: ipv4_src: ' + str(req_match.ipv4_src) + |
| " != " + str(res_match.ipv4_src)) |
| parent.assertEqual(req_match.ipv4_dst, res_match.ipv4_dst, |
| 'Match failed: ipv4_dst: ' + str(req_match.ipv4_dst) + |
| " != " + str(res_match.ipv4_dst)) |
| |
| if (not(req_match.wildcards & ofp.OFPFW_NW_PROTO) |
| and ((req_match.ip_proto == TCP_PROTOCOL) |
| or (req_match.ip_proto == UDP_PROTOCOL))): |
| parent.assertEqual(req_match.tcp_src, res_match.tcp_src, |
| 'Match failed: tcp_src: ' + |
| str(req_match.tcp_src) + |
| " != " + str(res_match.tcp_src)) |
| parent.assertEqual(req_match.tcp_dst, res_match.tcp_dst, |
| 'Match failed: tcp_dst: ' + |
| str(req_match.tcp_dst) + |
| " != " + str(res_match.tcp_dst)) |
| |
| def packet_to_flow_match(parent, packet): |
| match = oftest.parse.packet_to_flow_match(packet) |
| if ofp.OFP_VERSION in [1, 2]: |
| match.wildcards |= required_wildcards(parent) |
| else: |
| # TODO remove incompatible OXM entries |
| pass |
| return match |
| |
| def flow_msg_create(parent, pkt, ing_port=None, action_list=None, wildcards=None, |
| egr_ports=None, egr_queue=None, check_expire=False, in_band=False): |
| """ |
| Create a flow message |
| |
| Match on packet with given wildcards. |
| See flow_match_test for other parameter descriptoins |
| @param egr_queue if not None, make the output an enqueue action |
| @param in_band if True, do not wildcard ingress port |
| @param egr_ports None (drop), single port or list of ports |
| """ |
| match = oftest.parse.packet_to_flow_match(pkt) |
| parent.assertTrue(match is not None, "Flow match from pkt failed") |
| if wildcards is None: |
| wildcards = required_wildcards(parent) |
| if in_band: |
| wildcards &= ~ofp.OFPFW_IN_PORT |
| match.wildcards = wildcards |
| match.in_port = ing_port |
| |
| if type(egr_ports) == type([]): |
| egr_port_list = egr_ports |
| else: |
| egr_port_list = [egr_ports] |
| |
| request = ofp.message.flow_add() |
| request.match = match |
| request.buffer_id = 0xffffffff |
| if check_expire: |
| request.flags |= ofp.OFPFF_SEND_FLOW_REM |
| request.hard_timeout = 1 |
| |
| if ofp.OFP_VERSION == 1: |
| actions = request.actions |
| else: |
| actions = [] |
| request.instructions.append(ofp.instruction.apply_actions(actions)) |
| |
| if action_list is not None: |
| actions.extend(action_list) |
| |
| # Set up output/enqueue action if directed |
| if egr_queue is not None: |
| parent.assertTrue(egr_ports is not None, "Egress port not set") |
| act = ofp.action.enqueue() |
| for egr_port in egr_port_list: |
| act.port = egr_port |
| act.queue_id = egr_queue |
| actions.append(act) |
| elif egr_ports is not None: |
| for egr_port in egr_port_list: |
| act = ofp.action.output() |
| act.port = egr_port |
| actions.append(act) |
| |
| logging.debug(request.show()) |
| |
| return request |
| |
| def flow_msg_install(parent, request, clear_table_override=None): |
| """ |
| Install a flow mod message in the switch |
| |
| @param parent Must implement controller, assertEqual, assertTrue |
| @param request The request, all set to go |
| @param clear_table If true, clear the flow table before installing |
| """ |
| |
| clear_table = test_param_get('clear_table', default=True) |
| if(clear_table_override != None): |
| clear_table = clear_table_override |
| |
| if clear_table: |
| logging.debug("Clear flow table") |
| delete_all_flows(parent.controller) |
| |
| logging.debug("Insert flow") |
| parent.controller.message_send(request) |
| |
| do_barrier(parent.controller) |
| |
| def flow_match_test_port_pair(parent, ing_port, egr_ports, wildcards=None, |
| vlan_vid=-1, pkt=None, exp_pkt=None, |
| action_list=None): |
| """ |
| Flow match test on single TCP packet |
| @param egr_ports A single port or list of ports |
| |
| Run test with packet through switch from ing_port to egr_port |
| See flow_match_test for parameter descriptions |
| """ |
| |
| if wildcards is None: |
| wildcards = required_wildcards(parent) |
| logging.info("Pkt match test: " + str(ing_port) + " to " + |
| str(egr_ports)) |
| logging.debug(" WC: " + hex(wildcards) + " vlan: " + str(vlan_vid)) |
| if pkt is None: |
| pkt = simple_tcp_packet(dl_vlan_enable=(vlan_vid >= 0), vlan_vid=vlan_vid) |
| if exp_pkt is None: |
| exp_pkt = pkt |
| |
| request = flow_msg_create(parent, pkt, ing_port=ing_port, |
| wildcards=wildcards, egr_ports=egr_ports, |
| action_list=action_list) |
| |
| flow_msg_install(parent, request) |
| |
| logging.debug("Send packet: " + str(ing_port) + " to " + |
| str(egr_ports)) |
| parent.dataplane.send(ing_port, str(pkt)) |
| |
| exp_ports = [ing_port if port == ofp.OFPP_IN_PORT else port for port in egr_ports] |
| verify_packets(parent, exp_pkt, exp_ports) |
| |
| def flow_match_test_pktout(parent, ing_port, egr_ports, |
| vlan_vid=-1, pkt=None, exp_pkt=None, |
| action_list=None): |
| """ |
| Packet-out test on single TCP packet |
| @param egr_ports A single port or list of ports |
| |
| Run test sending packet-out to egr_ports. The goal is to test the actions |
| taken on the packet, not the matching which is of course irrelevant. |
| See flow_match_test for parameter descriptions |
| """ |
| |
| if pkt is None: |
| pkt = simple_tcp_packet(dl_vlan_enable=(vlan_vid >= 0), vlan_vid=vlan_vid) |
| if exp_pkt is None: |
| exp_pkt = pkt |
| |
| msg = ofp.message.packet_out() |
| msg.in_port = ing_port |
| msg.buffer_id = 0xffffffff |
| msg.data = str(pkt) |
| if action_list is not None: |
| for act in action_list: |
| msg.actions.append(act) |
| |
| # Set up output action |
| if egr_ports is not None: |
| for egr_port in egr_ports: |
| act = ofp.action.output() |
| act.port = egr_port |
| msg.actions.append(act) |
| |
| logging.debug(msg.show()) |
| parent.controller.message_send(msg) |
| |
| exp_ports = [ing_port if port == ofp.OFPP_IN_PORT else port for port in egr_ports] |
| verify_packets(parent, exp_pkt, exp_ports) |
| |
| def get_egr_list(parent, of_ports, how_many, exclude_list=[]): |
| """ |
| Generate a list of ports avoiding those in the exclude list |
| @param parent Supplies logging |
| @param of_ports List of OF port numbers |
| @param how_many Number of ports to be added to the list |
| @param exclude_list List of ports not to be used |
| @returns An empty list if unable to find enough ports |
| """ |
| |
| if how_many == 0: |
| return [] |
| |
| count = 0 |
| egr_ports = [] |
| for egr_idx in range(len(of_ports)): |
| if of_ports[egr_idx] not in exclude_list: |
| egr_ports.append(of_ports[egr_idx]) |
| count += 1 |
| if count >= how_many: |
| return egr_ports |
| logging.debug("Could not generate enough egress ports for test") |
| return [] |
| |
| def flow_match_test(parent, port_map, wildcards=None, vlan_vid=-1, pkt=None, |
| exp_pkt=None, action_list=None, |
| max_test=0, egr_count=1, ing_port=False): |
| """ |
| Run flow_match_test_port_pair on all port pairs and packet-out |
| |
| @param max_test If > 0 no more than this number of tests are executed. |
| @param parent Must implement controller, dataplane, assertTrue, assertEqual |
| and logging |
| @param pkt If not None, use this packet for ingress |
| @param wildcards For flow match entry |
| @param vlan_vid If not -1, and pkt is None, create a pkt w/ VLAN tag |
| @param exp_pkt If not None, use this as the expected output pkt; els use pkt |
| @param action_list Additional actions to add to flow mod |
| @param egr_count Number of egress ports; -1 means get from config w/ dflt 2 |
| """ |
| if wildcards is None: |
| wildcards = required_wildcards(parent) |
| of_ports = port_map.keys() |
| of_ports.sort() |
| parent.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| test_count = 0 |
| |
| if egr_count == -1: |
| egr_count = test_param_get('egr_count', default=2) |
| |
| for ing_idx in range(len(of_ports)): |
| ingress_port = of_ports[ing_idx] |
| egr_ports = get_egr_list(parent, of_ports, egr_count, |
| exclude_list=[ingress_port]) |
| if ing_port: |
| egr_ports.append(ofp.OFPP_IN_PORT) |
| if len(egr_ports) == 0: |
| parent.assertTrue(0, "Failed to generate egress port list") |
| |
| flow_match_test_port_pair(parent, ingress_port, egr_ports, |
| wildcards=wildcards, vlan_vid=vlan_vid, |
| pkt=pkt, exp_pkt=exp_pkt, |
| action_list=action_list) |
| test_count += 1 |
| if (max_test > 0) and (test_count > max_test): |
| logging.info("Ran " + str(test_count) + " tests; exiting") |
| break |
| |
| if not test_param_get('pktout_actions', default=True): |
| return |
| |
| ingress_port = of_ports[0] |
| egr_ports = get_egr_list(parent, of_ports, egr_count, |
| exclude_list=[ingress_port]) |
| if ing_port: |
| egr_ports.append(ofp.OFPP_IN_PORT) |
| flow_match_test_pktout(parent, ingress_port, egr_ports, |
| vlan_vid=vlan_vid, |
| pkt=pkt, exp_pkt=exp_pkt, |
| action_list=action_list) |
| |
| def test_param_get(key, default=None): |
| """ |
| Return value passed via test-params if present |
| |
| @param key The lookup key |
| @param default Default value to use if not found |
| |
| If the pair 'key=val' appeared in the string passed to --test-params |
| on the command line, return val (as interpreted by exec). Otherwise |
| return default value. |
| |
| WARNING: TEST PARAMETERS MUST BE PYTHON IDENTIFIERS; |
| eg egr_count, not egr-count. |
| """ |
| try: |
| exec oftest.config["test_params"] |
| except: |
| return default |
| |
| try: |
| return eval(str(key)) |
| except: |
| return default |
| |
| def action_generate(parent, field_to_mod, mod_field_vals): |
| """ |
| Create an action to modify the field indicated in field_to_mod |
| |
| @param parent Must implement, assertTrue |
| @param field_to_mod The field to modify as a string name |
| @param mod_field_vals Hash of values to use for modified values |
| """ |
| |
| act = None |
| |
| if field_to_mod in ['pktlen']: |
| return None |
| |
| if field_to_mod == 'eth_dst': |
| act = ofp.action.set_dl_dst() |
| act.dl_addr = oftest.parse.parse_mac(mod_field_vals['eth_dst']) |
| elif field_to_mod == 'eth_src': |
| act = ofp.action.set_dl_src() |
| act.dl_addr = oftest.parse.parse_mac(mod_field_vals['eth_src']) |
| elif field_to_mod == 'dl_vlan_enable': |
| if not mod_field_vals['dl_vlan_enable']: # Strip VLAN tag |
| act = ofp.action.strip_vlan() |
| # Add VLAN tag is handled by vlan_vid field |
| # Will return None in this case |
| elif field_to_mod == 'vlan_vid': |
| act = ofp.action.set_vlan_vid() |
| act.vlan_vid = mod_field_vals['vlan_vid'] |
| elif field_to_mod == 'vlan_pcp': |
| act = ofp.action.set_vlan_pcp() |
| act.vlan_pcp = mod_field_vals['vlan_pcp'] |
| elif field_to_mod == 'ip_src': |
| act = ofp.action.set_nw_src() |
| act.nw_addr = oftest.parse.parse_ip(mod_field_vals['ip_src']) |
| elif field_to_mod == 'ip_dst': |
| act = ofp.action.set_nw_dst() |
| act.nw_addr = oftest.parse.parse_ip(mod_field_vals['ip_dst']) |
| elif field_to_mod == 'ip_tos': |
| act = ofp.action.set_nw_tos() |
| act.nw_tos = mod_field_vals['ip_tos'] |
| elif field_to_mod == 'tcp_sport': |
| act = ofp.action.set_tp_src() |
| act.tp_port = mod_field_vals['tcp_sport'] |
| elif field_to_mod == 'tcp_dport': |
| act = ofp.action.set_tp_dst() |
| act.tp_port = mod_field_vals['tcp_dport'] |
| elif field_to_mod == 'udp_sport': |
| act = ofp.action.set_tp_src() |
| act.tp_port = mod_field_vals['udp_sport'] |
| elif field_to_mod == 'udp_dport': |
| act = ofp.action.set_tp_dst() |
| act.tp_port = mod_field_vals['udp_dport'] |
| else: |
| parent.assertTrue(0, "Unknown field to modify: " + str(field_to_mod)) |
| |
| return act |
| |
| def pkt_action_setup(parent, start_field_vals={}, mod_field_vals={}, |
| mod_fields=[], tp="tcp", check_test_params=False): |
| """ |
| Set up the ingress and expected packet and action list for a test |
| |
| @param parent Must implement assertTrue |
| @param start_field_values Field values to use for ingress packet (optional) |
| @param mod_field_values Field values to use for modified packet (optional) |
| @param mod_fields The list of fields to be modified by the switch in the test. |
| @params check_test_params If True, will check the parameters vid, add_vlan |
| and strip_vlan from the command line. |
| |
| Returns a triple: pkt-to-send, expected-pkt, action-list |
| """ |
| |
| new_actions = [] |
| |
| base_pkt_params = {} |
| base_pkt_params['pktlen'] = 100 |
| base_pkt_params['eth_dst'] = '00:DE:F0:12:34:56' |
| base_pkt_params['eth_src'] = '00:23:45:67:89:AB' |
| base_pkt_params['dl_vlan_enable'] = False |
| base_pkt_params['vlan_vid'] = 2 |
| base_pkt_params['vlan_pcp'] = 0 |
| base_pkt_params['ip_src'] = '192.168.0.1' |
| base_pkt_params['ip_dst'] = '192.168.0.2' |
| base_pkt_params['ip_tos'] = 0 |
| if tp == "tcp": |
| base_pkt_params['tcp_sport'] = 1234 |
| base_pkt_params['tcp_dport'] = 80 |
| elif tp == "udp": |
| base_pkt_params['udp_sport'] = 1234 |
| base_pkt_params['udp_dport'] = 80 |
| for keyname in start_field_vals.keys(): |
| base_pkt_params[keyname] = start_field_vals[keyname] |
| |
| mod_pkt_params = {} |
| mod_pkt_params['pktlen'] = 100 |
| mod_pkt_params['eth_dst'] = '00:21:0F:ED:CB:A9' |
| mod_pkt_params['eth_src'] = '00:ED:CB:A9:87:65' |
| mod_pkt_params['dl_vlan_enable'] = False |
| mod_pkt_params['vlan_vid'] = 3 |
| mod_pkt_params['vlan_pcp'] = 7 |
| mod_pkt_params['ip_src'] = '10.20.30.40' |
| mod_pkt_params['ip_dst'] = '50.60.70.80' |
| mod_pkt_params['ip_tos'] = 0xf0 |
| if tp == "tcp": |
| mod_pkt_params['tcp_sport'] = 4321 |
| mod_pkt_params['tcp_dport'] = 8765 |
| elif tp == "udp": |
| mod_pkt_params['udp_sport'] = 4321 |
| mod_pkt_params['udp_dport'] = 8765 |
| for keyname in mod_field_vals.keys(): |
| mod_pkt_params[keyname] = mod_field_vals[keyname] |
| |
| # Check for test param modifications |
| strip = False |
| if check_test_params: |
| add_vlan = test_param_get('add_vlan') |
| strip_vlan = test_param_get('strip_vlan') |
| vid = test_param_get('vid') |
| |
| if add_vlan and strip_vlan: |
| parent.assertTrue(0, "Add and strip VLAN both specified") |
| |
| if vid: |
| base_pkt_params['dl_vlan_enable'] = True |
| base_pkt_params['vlan_vid'] = vid |
| if 'vlan_vid' in mod_fields: |
| mod_pkt_params['vlan_vid'] = vid + 1 |
| |
| if add_vlan: |
| base_pkt_params['dl_vlan_enable'] = False |
| mod_pkt_params['dl_vlan_enable'] = True |
| mod_pkt_params['pktlen'] = base_pkt_params['pktlen'] + 4 |
| mod_fields.append('pktlen') |
| mod_fields.append('dl_vlan_enable') |
| if 'vlan_vid' not in mod_fields: |
| mod_fields.append('vlan_vid') |
| elif strip_vlan: |
| base_pkt_params['dl_vlan_enable'] = True |
| mod_pkt_params['dl_vlan_enable'] = False |
| mod_pkt_params['pktlen'] = base_pkt_params['pktlen'] - 4 |
| mod_fields.append('dl_vlan_enable') |
| mod_fields.append('pktlen') |
| |
| if tp == "tcp": |
| packet_builder = simple_tcp_packet |
| elif tp == "udp": |
| packet_builder = simple_udp_packet |
| else: |
| raise NotImplementedError("unknown transport protocol %s" % tp) |
| |
| # Build the ingress packet |
| ingress_pkt = packet_builder(**base_pkt_params) |
| |
| # Build the expected packet, modifying the indicated fields |
| for item in mod_fields: |
| base_pkt_params[item] = mod_pkt_params[item] |
| act = action_generate(parent, item, mod_pkt_params) |
| if act: |
| new_actions.append(act) |
| |
| expected_pkt = packet_builder(**base_pkt_params) |
| |
| return (ingress_pkt, expected_pkt, new_actions) |
| |
| # Generate a simple "drop" flow mod |
| # If in_band is true, then only drop from first test port |
| def flow_mod_gen(port_map, in_band): |
| request = ofp.message.flow_add() |
| request.match.wildcards = ofp.OFPFW_ALL |
| if in_band: |
| request.match.wildcards = ofp.OFPFW_ALL - ofp.OFPFW_IN_PORT |
| for of_port, ifname in port_map.items(): # Grab first port |
| break |
| request.match.in_port = of_port |
| request.buffer_id = 0xffffffff |
| return request |
| |
| def skip_message_emit(parent, s): |
| """ |
| Print out a 'skipped' message to stderr |
| |
| @param s The string to print out to the log file |
| """ |
| global skipped_test_count |
| |
| skipped_test_count += 1 |
| logging.info("Skipping: " + s) |
| if oftest.config["debug"] < logging.WARNING: |
| sys.stderr.write("(skipped) ") |
| else: |
| sys.stderr.write("(S)") |
| |
| |
| def all_stats_get(parent): |
| """ |
| Get the aggregate stats for all flows in the table |
| @param parent Test instance with controller connection and assert |
| @returns dict with keys flows, packets, bytes, active (flows), |
| lookups, matched |
| """ |
| stat_req = ofp.message.aggregate_stats_request() |
| stat_req.match = ofp.match() |
| stat_req.match.wildcards = ofp.OFPFW_ALL |
| stat_req.table_id = 0xff |
| stat_req.out_port = ofp.OFPP_NONE |
| |
| rv = {} |
| |
| (reply, pkt) = parent.controller.transact(stat_req) |
| parent.assertTrue(len(reply.entries) == 1, "Did not receive flow stats reply") |
| |
| for obj in reply.entries: |
| (rv["flows"], rv["packets"], rv["bytes"]) = (obj.flow_count, |
| obj.packet_count, obj.byte_count) |
| break |
| |
| request = ofp.message.table_stats_request() |
| (reply , pkt) = parent.controller.transact(request) |
| |
| |
| (rv["active"], rv["lookups"], rv["matched"]) = (0,0,0) |
| for obj in reply.entries: |
| rv["active"] += obj.active_count |
| rv["lookups"] += obj.lookup_count |
| rv["matched"] += obj.matched_count |
| |
| return rv |
| |
| _import_blacklist.add('FILTER') |
| FILTER=''.join([(len(repr(chr(x)))==3) and chr(x) or '.' |
| for x in range(256)]) |
| |
| def hex_dump_buffer(src, length=16): |
| """ |
| Convert src to a hex dump string and return the string |
| @param src The source buffer |
| @param length The number of bytes shown in each line |
| @returns A string showing the hex dump |
| """ |
| result = ["\n"] |
| for i in xrange(0, len(src), length): |
| chars = src[i:i+length] |
| hex = ' '.join(["%02x" % ord(x) for x in chars]) |
| printable = ''.join(["%s" % ((ord(x) <= 127 and |
| FILTER[ord(x)]) or '.') for x in chars]) |
| result.append("%04x %-*s %s\n" % (i, length*3, hex, printable)) |
| return ''.join(result) |
| |
| def format_packet(pkt): |
| return "Packet length %d \n%s" % (len(str(pkt)), |
| hex_dump_buffer(str(pkt))) |
| |
| def inspect_packet(pkt): |
| """ |
| Wrapper around scapy's show() method. |
| @returns A string showing the dissected packet. |
| """ |
| from cStringIO import StringIO |
| out = None |
| backup = sys.stdout |
| try: |
| tmp = StringIO() |
| sys.stdout = tmp |
| pkt.show2() |
| out = tmp.getvalue() |
| tmp.close() |
| finally: |
| sys.stdout = backup |
| return out |
| |
| def nonstandard(cls): |
| """ |
| Testcase decorator that marks the test as being non-standard. |
| These tests are not automatically added to the "standard" group. |
| """ |
| cls._nonstandard = True |
| return cls |
| |
| def disabled(cls): |
| """ |
| Testcase decorator that marks the test as being disabled. |
| These tests are not automatically added to the "standard" group or |
| their module's group. |
| """ |
| cls._disabled = True |
| return cls |
| |
| def group(name): |
| """ |
| Testcase decorator that adds the test to a group. |
| """ |
| def fn(cls): |
| if not hasattr(cls, "_groups"): |
| cls._groups = [] |
| cls._groups.append(name) |
| return cls |
| return fn |
| |
| def version(ver): |
| """ |
| Testcase decorator that specifies which versions of OpenFlow the test |
| supports. The default is 1.0+. This decorator may only be used once. |
| |
| Supported syntax: |
| 1.0 -> 1.0 |
| 1.0,1.2,1.3 -> 1.0, 1.2, 1.3 |
| 1.0+ -> 1.0, 1.1, 1.2, 1.3 |
| """ |
| versions = parse_version(ver) |
| def fn(cls): |
| cls._versions = versions |
| return cls |
| return fn |
| |
| def parse_version(ver): |
| allowed_versions = ["1.0", "1.1", "1.2", "1.3"] |
| if re.match("^1\.\d+$", ver): |
| versions = set([ver]) |
| elif re.match("^(1\.\d+)\+$", ver): |
| if not ver[:-1] in allowed_versions: |
| raise ValueError("invalid OpenFlow version %s" % ver[:-1]) |
| versions = set() |
| if ver != "1.1+": versions.add("1.0") |
| if ver != "1.2+": versions.add("1.1") |
| if ver != "1.3+": versions.add("1.2") |
| versions.add("1.3") |
| else: |
| versions = set(ver.split(',')) |
| |
| for version in versions: |
| if not version in allowed_versions: |
| raise ValueError("invalid OpenFlow version %s" % version) |
| |
| return versions |
| |
| assert(parse_version("1.0") == set(["1.0"])) |
| assert(parse_version("1.0,1.2,1.3") == set(["1.0", "1.2", "1.3"])) |
| assert(parse_version("1.0+") == set(["1.0", "1.1", "1.2", "1.3"])) |
| |
| def get_stats(test, req): |
| """ |
| Retrieve a list of stats entries. Handles OFPSF_REPLY_MORE. |
| """ |
| msgtype = ofp.OFPT_STATS_REPLY |
| more_flag = ofp.OFPSF_REPLY_MORE |
| stats = [] |
| reply, _ = test.controller.transact(req) |
| test.assertTrue(reply is not None, "No response to stats request") |
| test.assertEquals(reply.type, msgtype, "Response had unexpected message type") |
| stats.extend(reply.entries) |
| while reply.flags & more_flag != 0: |
| reply, pkt = test.controller.poll(exp_msg=msgtype) |
| test.assertTrue(reply is not None, "No response to stats request") |
| stats.extend(reply.entries) |
| return stats |
| |
| def get_flow_stats(test, match, table_id=None, |
| out_port=None, out_group=None, |
| cookie=0, cookie_mask=0): |
| """ |
| Retrieve a list of flow stats entries. |
| """ |
| |
| if table_id == None: |
| if ofp.OFP_VERSION <= 2: |
| table_id = 0xff |
| else: |
| table_id = ofp.OFPTT_ALL |
| |
| if out_port == None: |
| if ofp.OFP_VERSION == 1: |
| out_port = ofp.OFPP_NONE |
| else: |
| out_port = ofp.OFPP_ANY |
| |
| if out_group == None: |
| if ofp.OFP_VERSION > 1: |
| out_group = ofp.OFPP_ANY |
| |
| req = ofp.message.flow_stats_request(match=match, |
| table_id=table_id, |
| out_port=out_port) |
| if ofp.OFP_VERSION > 1: |
| req.out_group = out_group |
| req.cookie = cookie |
| req.cookie_mask = cookie_mask |
| |
| return get_stats(test, req) |
| |
| def get_port_stats(test, port_no): |
| """ |
| Retrieve a list of port stats entries. |
| """ |
| req = ofp.message.port_stats_request(port_no=port_no) |
| return get_stats(test, req) |
| |
| def get_queue_stats(test, port_no, queue_id): |
| """ |
| Retrieve a list of queue stats entries. |
| """ |
| req = ofp.message.queue_stats_request(port_no=port_no, queue_id=queue_id) |
| return get_stats(test, req) |
| |
| def verify_flow_stats(test, match, table_id=0xff, |
| initial=[], |
| pkts=None, bytes=None): |
| """ |
| Verify that flow stats changed as expected. |
| |
| Optionally takes an 'initial' list of stats entries, as returned by |
| get_flow_stats(). If 'initial' is not given the counters are assumed to |
| begin at 0. |
| """ |
| |
| def accumulate(stats): |
| pkts_acc = bytes_acc = 0 |
| for stat in stats: |
| pkts_acc += stat.packet_count |
| bytes_acc += stat.byte_count |
| return (pkts_acc, bytes_acc) |
| |
| pkts_before, bytes_before = accumulate(initial) |
| |
| # Wait 10s for counters to update |
| pkt_diff = byte_diff = None |
| for i in range(0, 100): |
| stats = get_flow_stats(test, match, table_id=table_id) |
| pkts_after, bytes_after = accumulate(stats) |
| pkt_diff = pkts_after - pkts_before |
| byte_diff = bytes_after - bytes_before |
| if (pkts == None or pkt_diff >= pkts) and \ |
| (bytes == None or byte_diff >= bytes): |
| break |
| time.sleep(0.1) |
| |
| if pkts != None: |
| test.assertEquals(pkt_diff, pkts, "Flow packet counter not updated properly (expected increase of %d, got increase of %d)" % (pkts, pkt_diff)) |
| |
| if bytes != None: |
| test.assertTrue(byte_diff >= bytes and byte_diff <= bytes*1.1, |
| "Flow byte counter not updated properly (expected increase of %d, got increase of %d)" % (bytes, byte_diff)) |
| |
| def verify_port_stats(test, port, |
| initial=[], |
| tx_pkts=None, rx_pkts=None, |
| tx_bytes=None, rx_bytes=None): |
| """ |
| Verify that port stats changed as expected. |
| |
| Optionally takes an 'initial' list of stats entries, as returned by |
| get_port_stats(). If 'initial' is not given the counters are assumed to |
| begin at 0. |
| """ |
| def accumulate(stats): |
| tx_pkts_acc = rx_pkts_acc = tx_bytes_acc = rx_bytes_acc = 0 |
| for stat in stats: |
| tx_pkts_acc += stat.tx_packets |
| rx_pkts_acc += stat.rx_packets |
| tx_bytes_acc += stat.tx_bytes |
| rx_bytes_acc += stat.rx_bytes |
| return (tx_pkts_acc, rx_pkts_acc, tx_bytes_acc, rx_bytes_acc) |
| |
| tx_pkts_before, rx_pkts_before, \ |
| tx_bytes_before, rx_bytes_before = accumulate(initial) |
| |
| # Wait 10s for counters to update |
| for i in range(0, 100): |
| stats = get_port_stats(test, port) |
| tx_pkts_after, rx_pkts_after, \ |
| tx_bytes_after, rx_bytes_after = accumulate(stats) |
| tx_pkts_diff = tx_pkts_after - tx_pkts_before |
| rx_pkts_diff = rx_pkts_after - rx_pkts_before |
| tx_bytes_diff = tx_bytes_after - tx_bytes_before |
| rx_bytes_diff = rx_bytes_after - rx_bytes_before |
| if (tx_pkts == None or tx_pkts <= tx_pkts_diff) and \ |
| (rx_pkts == None or rx_pkts <= rx_pkts_diff) and \ |
| (tx_bytes == None or tx_bytes <= tx_bytes_diff) and \ |
| (rx_bytes == None or rx_bytes <= rx_bytes_diff): |
| break |
| time.sleep(0.1) |
| |
| if (tx_pkts != None): |
| test.assertGreaterEqual(tx_pkts_diff, tx_pkts, |
| "Port TX packet counter is not updated correctly (expected increase of %d, got increase of %d)" % (tx_pkts, tx_pkts_diff)) |
| if (rx_pkts != None): |
| test.assertGreaterEqual(rx_pkts_diff, rx_pkts, |
| "Port RX packet counter is not updated correctly (expected increase of %d, got increase of %d)" % (rx_pkts, rx_pkts_diff)) |
| if (tx_bytes != None): |
| test.assertGreaterEqual(tx_bytes_diff, tx_bytes, |
| "Port TX byte counter is not updated correctly (expected increase of %d, got increase of %d)" % (tx_bytes, tx_bytes_diff)) |
| if (rx_bytes != None): |
| test.assertGreaterEqual(rx_bytes_diff, rx_bytes, |
| "Port RX byte counter is not updated correctly (expected increase of %d, got increase of %d)" % (rx_bytes, rx_bytes_diff)) |
| |
| def verify_queue_stats(test, port_no, queue_id, |
| initial=[], |
| pkts=None, bytes=None): |
| """ |
| Verify that queue stats changed as expected. |
| |
| Optionally takes an 'initial' list of stats entries, as returned by |
| get_queue_stats(). If 'initial' is not given the counters are assumed to |
| begin at 0. |
| """ |
| def accumulate(stats): |
| pkts_acc = bytes_acc = 0 |
| for stat in stats: |
| pkts_acc += stat.tx_packets |
| bytes_acc += stat.tx_bytes |
| return (pkts_acc, bytes_acc) |
| |
| pkts_before, bytes_before = accumulate(initial) |
| |
| # Wait 10s for counters to update |
| pkt_diff = byte_diff = None |
| for i in range(0, 100): |
| stats = get_queue_stats(test, port_no, queue_id) |
| pkts_after, bytes_after = accumulate(stats) |
| pkt_diff = pkts_after - pkts_before |
| byte_diff = bytes_after - bytes_before |
| if (pkts == None or pkt_diff >= pkts) and \ |
| (bytes == None or byte_diff >= bytes): |
| break |
| time.sleep(0.1) |
| |
| if pkts != None: |
| test.assertEquals(pkt_diff, pkts, "Queue packet counter not updated properly (expected increase of %d, got increase of %d)" % (pkts, pkt_diff)) |
| |
| if bytes != None: |
| test.assertTrue(byte_diff >= bytes and byte_diff <= bytes*1.1, |
| "Queue byte counter not updated properly (expected increase of %d, got increase of %d)" % (bytes, byte_diff)) |
| |
| def packet_in_match(msg, data, in_port=None, reason=None): |
| """ |
| Check whether the packet_in message 'msg' has fields matching 'data', |
| 'in_port', and 'reason'. |
| |
| This function handles truncated packet_in data. The 'in_port' and 'reason' |
| parameters are optional. |
| |
| @param msg packet_in message |
| @param data Expected packet_in data |
| @param in_port Expected packet_in in_port, or None |
| @param reason Expected packet_in reason, or None |
| """ |
| |
| if ofp.OFP_VERSION <= 2: |
| pkt_in_port = msg.in_port |
| else: |
| oxms = { type(oxm): oxm for oxm in msg.match.oxm_list } |
| if ofp.oxm.in_port in oxms: |
| pkt_in_port = oxms[ofp.oxm.in_port].value |
| else: |
| logging.warn("Missing in_port in packet-in message") |
| pkt_in_port = None |
| |
| if in_port != None and in_port != pkt_in_port: |
| logging.debug("Incorrect packet_in in_port (expected %d, received %d)", in_port, pkt_in_port) |
| return False |
| |
| if reason != None and reason != msg.reason: |
| logging.debug("Incorrect packet_in reason (expected %d, received %d)", reason, msg.reason) |
| return False |
| |
| # Check that one of the packets is a prefix of the other. |
| # The received packet may be either truncated or padded, but not both. |
| # (Some of the padding may be truncated but that's irrelevant). We |
| # need to check that the smaller packet is a prefix of the larger one. |
| # Note that this check succeeds if the switch sends a zero-length |
| # packet-in. |
| compare_len = min(len(msg.data), len(data)) |
| if data[:compare_len] != msg.data[:compare_len]: |
| logging.debug("Incorrect packet_in data") |
| logging.debug("Expected %s" % format_packet(data[:compare_len])) |
| logging.debug("Received %s" % format_packet(msg.data[:compare_len])) |
| return False |
| |
| return True |
| |
| def verify_packet_in(test, data, in_port, reason, controller=None): |
| """ |
| Assert that the controller receives a packet_in message matching data 'data' |
| from port 'in_port' with reason 'reason'. Does not trigger the packet_in |
| itself, that's up to the test case. |
| |
| @param test Instance of base_tests.SimpleProtocol |
| @param pkt String to expect as the packet_in data |
| @param in_port OpenFlow port number to expect as the packet_in in_port |
| @param reason One of OFPR_* to expect as the packet_in reason |
| @param controller Controller instance, defaults to test.controller |
| @returns The received packet-in message |
| """ |
| |
| if controller == None: |
| controller = test.controller |
| |
| end_time = time.time() + oftest.ofutils.default_timeout |
| |
| while True: |
| msg, _ = controller.poll(ofp.OFPT_PACKET_IN, end_time - time.time()) |
| if not msg: |
| # Timeout |
| break |
| elif packet_in_match(msg, data, in_port, reason): |
| # Found a matching message |
| break |
| |
| test.assertTrue(msg is not None, 'Packet in message not received on port %r' % in_port) |
| return msg |
| |
| def verify_no_packet_in(test, data, in_port, controller=None): |
| """ |
| Assert that the controller does not receive a packet_in message matching |
| data 'data' from port 'in_port'. |
| |
| @param test Instance of base_tests.SimpleProtocol |
| @param pkt String to expect as the packet_in data |
| @param in_port OpenFlow port number to expect as the packet_in in_port |
| @param controller Controller instance, defaults to test.controller |
| """ |
| |
| if controller == None: |
| controller = test.controller |
| |
| # Negative test, need to wait a short amount of time before checking we |
| # didn't receive the message. |
| time.sleep(oftest.ofutils.default_negative_timeout) |
| |
| # Check every packet_in queued in the controller |
| while True: |
| msg, _ = controller.poll(ofp.OFPT_PACKET_IN, timeout=0) |
| if msg == None: |
| # No more queued packet_in messages |
| break |
| elif packet_in_match(msg, data, in_port, None): |
| # Found a matching message |
| break |
| |
| if in_port == None: |
| test.assertTrue(msg == None, "Did not expect a packet-in message on any port") |
| else: |
| test.assertTrue(msg == None, "Did not expect a packet-in message on port %d" % in_port) |
| |
| def openflow_ports(num=None): |
| """ |
| Return a list of 'num' OpenFlow port numbers |
| |
| If 'num' is None, return all available ports. Otherwise, limit the length |
| of the result to 'num' and raise an exception if not enough ports are |
| available. |
| """ |
| ports = sorted(oftest.config["port_map"].keys()) |
| if num != None and len(ports) < num: |
| raise Exception("test requires %d ports but only %d are available" % (num, len(ports))) |
| return ports[:num] |
| |
| def verify_packet(test, pkt, ofport): |
| """ |
| Check that an expected packet is received |
| """ |
| logging.debug("Checking for pkt on port %r", ofport) |
| (rcv_port, rcv_pkt, pkt_time) = test.dataplane.poll(port_number=ofport, exp_pkt=str(pkt)) |
| test.assertTrue(rcv_pkt != None, "Did not receive pkt on %r" % ofport) |
| return (rcv_port, rcv_pkt, pkt_time) |
| |
| def verify_no_packet(test, pkt, ofport): |
| """ |
| Check that a particular packet is not received |
| """ |
| logging.debug("Negative check for pkt on port %r", ofport) |
| (rcv_port, rcv_pkt, pkt_time) = \ |
| test.dataplane.poll( |
| port_number=ofport, exp_pkt=str(pkt), |
| timeout=oftest.ofutils.default_negative_timeout) |
| test.assertTrue(rcv_pkt == None, "Received packet on %r" % ofport) |
| |
| def verify_no_other_packets(test): |
| """ |
| Check that no unexpected packets are received |
| |
| This is a no-op if the --relax option is in effect. |
| """ |
| if oftest.config["relax"]: |
| return |
| logging.debug("Checking for unexpected packets on all ports") |
| (rcv_port, rcv_pkt, pkt_time) = test.dataplane.poll(timeout=oftest.ofutils.default_negative_timeout) |
| if rcv_pkt != None: |
| logging.debug("Received unexpected packet on port %r: %s", rcv_port, format_packet(rcv_pkt)) |
| test.assertTrue(rcv_pkt == None, "Unexpected packet on port %r" % rcv_port) |
| |
| def verify_packets(test, pkt, ofports): |
| """ |
| Check that a packet is received on certain ports |
| |
| Also verifies that the packet is not received on any other ports, and that no |
| other packets are received (unless --relax is in effect). |
| |
| This covers the common and simplest cases for checking dataplane outputs. |
| For more complex usage, like multiple different packets being output, or |
| multiple packets on the same port, use the primitive verify_packet, |
| verify_no_packet, and verify_no_other_packets functions directly. |
| """ |
| pkt = str(pkt) |
| for ofport in openflow_ports(): |
| if ofport in ofports: |
| verify_packet(test, pkt, ofport) |
| else: |
| verify_no_packet(test, pkt, ofport) |
| verify_no_other_packets(test) |
| |
| def verify_no_errors(ctrl): |
| error, _ = ctrl.poll(ofp.OFPT_ERROR, 0) |
| if error: |
| raise AssertionError("unexpected error type=%d code=%d" % (error.err_type, error.code)) |
| |
| def verify_capability(test, capability): |
| """ |
| Return True if DUT supports the specified capability. |
| |
| @param test Instance of base_tests.SimpleProtocol |
| @param capability One of ofp_capabilities. |
| """ |
| logging.info("Verifing that capability code is valid.") |
| test.assertIn(capability, ofp.const.ofp_capabilities_map, |
| "Capability code %d does not exist." % capability) |
| capability_str = ofp.const.ofp_capabilities_map[capability] |
| |
| logging.info(("Sending features_request to test if capability " |
| "%s is supported."), capability_str) |
| req = ofp.message.features_request() |
| res, raw = test.controller.transact(req) |
| test.assertIsNotNone(res, "Did not receive a response from the DUT.") |
| test.assertEqual(res.type, ofp.OFPT_FEATURES_REPLY, |
| ("Unexpected packet type %d received in response to " |
| "OFPT_FEATURES_REQUEST") % res.type) |
| logging.info("Received features_reply.") |
| |
| if (res.capabilities & capability) > 0: |
| logging.info("Switch capabilities bitmask claims to support %s", |
| capability_str) |
| return True, res.capabilities |
| else: |
| logging.info("Capabilities bitmask does not support %s.", |
| capability_str) |
| return False, res.capabilities |
| |
| def verify_configuration_flag(test, flag): |
| """ |
| Return True if DUT supports specified configuration flag. |
| |
| @param test Instance of base_tests.SimpleProtocol |
| @param flag One of ofp_config_flags. |
| @returns (supported, flags) Bool if flag is set and flag values. |
| """ |
| logging.info("Verifing that flag is valid.") |
| test.assertIn(flag, ofp.const.ofp_config_flags_map, |
| "flag %s does not exist." % flag) |
| flag_str = ofp.const.ofp_config_flags_map[flag] |
| |
| logging.info("Sending OFPT_GET_CONFIG_REQUEST.") |
| req = ofp.message.get_config_request() |
| rv = test.controller.message_send(req) |
| test.assertNotEqual(rv, -1, "Not able to send get_config_request.") |
| |
| logging.info("Expecting OFPT_GET_CONFIG_REPLY ") |
| (res, pkt) = test.controller.poll(exp_msg=ofp.OFPT_GET_CONFIG_REPLY, |
| timeout=2) |
| test.assertIsNotNone(res, "Did not receive OFPT_GET_CONFIG_REPLY") |
| logging.info("Received OFPT_GET_CONFIG_REPLY ") |
| |
| if res.flags == flag: |
| logging.info("%s flag is set.", flag_str) |
| return True, res.flags |
| else: |
| logging.info("%s flag is not set.", flag_str) |
| return False, res.flags |
| |
| __all__ = list(set(locals()) - _import_blacklist) |