blob: a8d9f4c3cbf7c4d1d83a85b1c05efd80074c1371 [file] [log] [blame]
#!/usr/bin/env bash
# -----------------------------------------------------------------------
# Copyright 2018-2023 Open Networking Foundation (ONF) and the ONF Contributors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# github-release.sh
# builds (with make) and uploads release artifacts (binaries, etc.) to github
# given a tag also create checksums files and release notes from the commit
# message
# -----------------------------------------------------------------------
set -euo pipefail
##-------------------##
##---] GLOBALS [---##
##-------------------##
declare -g WORKSPACE
declare -g GERRIT_PROJECT
declare -g __githost=github.com
# export DEBUG=1
## -----------------------------------------------------------------------
## Uncomment to activate
## -----------------------------------------------------------------------
# Debug arguments
# declare -i -g argv_gen_version=1
# declare -i -g draft_release=1
declare -a -g ARGV=() # Capture args to minimize globals and arg passing
[[ $# -gt 0 ]] && ARGV=("$@")
declare -g scratch # temp workspace for downloads
declare -g SCRIPT_VERSION='1.4' # git changeset needed
##--------------------##
##---] INCLUDES [---##
##--------------------#
## -----------------------------------------------------------------------
## Intent: Register an interrupt handler to display a stack trace on error
## -----------------------------------------------------------------------
function errexit()
{
local err=$?
set +o xtrace
local code="${1:-1}"
local prefix="${BASH_SOURCE[1]}:${BASH_LINENO[0]}"
echo -e "\nOFFENDER: ${prefix}"
if [ $# -gt 0 ] && [ "$1" == '--stacktrace-quiet' ]; then
code=1
else
echo "ERROR: '${BASH_COMMAND}' exited with status $err"
fi
# Print out the stack trace described by $function_stack
if [ ${#FUNCNAME[@]} -gt 2 ]
then
echo "Call tree:"
for ((i=1;i<${#FUNCNAME[@]}-1;i++))
do
echo " $i: ${BASH_SOURCE[$i+1]}:${BASH_LINENO[$i]} ${FUNCNAME[$i]}(...)"
done
fi
echo "Exiting with status ${code}"
echo
exit "${code}"
# return
}
# trap ERR to provide an error handler whenever a command exits nonzero
# this is a more verbose version of set -o errexit
trap errexit ERR
# setting errtrace allows our ERR trap handler to be propagated to functions,
# expansions and subshells
set -o errtrace
## -----------------------------------------------------------------------
## Intent: Cleanup scratch area on exit
## -----------------------------------------------------------------------
function sigtrap()
{
## Prevent mishaps
local is_read_only
is_read_only="$(declare -p scratch)"
if [[ $is_read_only != *"declare -r scratch="* ]]; then
echo "ERROR: variable scratch is not read-only, cleanup skipped"
exit 1
fi
if [ -d "$scratch" ]; then
/bin/rm -fr "$scratch"
fi
do_logout 'shellcheck-SC2119'
return
}
trap sigtrap EXIT
## -----------------------------------------------------------------------
## Intent: Return a random release version string.
## -----------------------------------------------------------------------
## Note: Do not use this function in production. get_version() is
## intended for local use or debugging $0 from within a jenkins
## job.
## -----------------------------------------------------------------------
function get_version()
{
declare -n ref="$1"
declare -a rev=()
rev+=("$(( RANDOM % 10 + 1 ))")
rev+=("$(( RANDOM % 256 + 1 ))")
rev+=("$(( RANDOM % 10000 + 1 ))")
local ver="v${rev[0]}.${rev[1]}.${rev[2]}"
func_echo "VERSION: $ver"
ref="$ver"
return
}
## -----------------------------------------------------------------------
## Intent: Provide defaults for environment variables
## -----------------------------------------------------------------------
function initEnvVars()
{
# when not running under Jenkins, use current dir as workspace and a blank
# project name
declare -g WORKSPACE=${WORKSPACE:-.}
declare -g GERRIT_PROJECT=${GERRIT_PROJECT:-}
# Github organization (or user) this project is published on. Project name should
# be the same on both Gerrit and GitHub
declare -g GITHUB_ORGANIZATION=${GITHUB_ORGANIZATION:-}
# glob pattern relative to project dir matching release artifacts
# ARTIFACT_GLOB=${ARTIFACT_GLOB:-"release/*"} # stat -- release/* not found, literal string (?)
declare -g ARTIFACT_GLOB=${ARTIFACT_GLOB:-"release/."}
# Use "release" as the default makefile target, can be a space separated list
declare -g RELEASE_TARGETS=${RELEASE_TARGETS:-release}
# Set and handle GOPATH and PATH
export GOPATH=${GOPATH:-$WORKSPACE/go}
export PATH=$PATH:/usr/lib/go-1.12/bin:/usr/local/go/bin:$GOPATH/bin
return
}
## -----------------------------------------------------------------------
## Intent: Create a scratch area for downloads and transient tools
## temp directory will be automatically removed upon exit.
## -----------------------------------------------------------------------
function init()
{
local pkgbase="${0##*/}" # basename
local pkgname="${pkgbase%.*}"
# initEnvVars # moved to full_banner()
## Create a temp directory for auto-cleanup
declare -g scratch
scratch="$(mktemp -d -t "${pkgname}.XXXXXXXXXX")"
readonly scratch
declare -p scratch
## prime the stream: cache answers
local work
get_release_dir work
declare -p work
local git_version
getGitVersion git_version
func_echo "$(declare -p git_version)"
return
}
## -----------------------------------------------------------------------
## Intent: Verbose output for logging
## -----------------------------------------------------------------------
function banner()
{
local iam="${0##*/}"
cat <<EOB
** -----------------------------------------------------------------------
** ${iam}::${FUNCNAME[1]}: $*
** -----------------------------------------------------------------------
EOB
}
## -----------------------------------------------------------------------
## Intent: Output a log banner to identify the running script/version.
## -----------------------------------------------------------------------
## TODO:
## o SCRIPT_VERSION => git changeset for repo:ci-managment
## o echo "library version: ${env."library.libName.version"}"
# -----------------------------------------------------------------------
# 14:18:38 > git fetch --no-tags --progress -- https://gerrit.opencord.org/ci-management.git +refs/heads/*:refs/remotes/origin/* # timeout=10
# 14:18:39 Checking out Revision 50f6e0b97f449b32d32ec0e02d59642000351847 (master)
# -----------------------------------------------------------------------
function full_banner()
{
local iam="${0##*/}"
initEnvVars # set defaults
cat <<EOH
** -----------------------------------------------------------------------
** IAM: ${iam} :: ${FUNCNAME[0]}
** ARGV: ${ARGV[@]}
** PWD: $(/bin/pwd)
** NOW: $(date '+%Y/%m/%d %H:%M:%S')
** VER: ${SCRIPT_VERSION:-'unknown'}
** -----------------------------------------------------------------------
** GERRIT_PROJECT: $(declare -p GERRIT_PROJECT)
** GITHUB_ORGANIZATION: $(declare -p GITHUB_ORGANIZATION)
** RELEASE_TARGETS: $(declare -p RELEASE_TARGETS)
** GOPATH: $(declare -p GOPATH)
** -----------------------------------------------------------------------
** PATH += /usr/lib/go-1.12/bin:/usr/local/go/bin:GOPATH/bin
** -----------------------------------------------------------------------
EOH
return
}
## -----------------------------------------------------------------------
## Intent: Display a message with 'iam' identifier for logging
## -----------------------------------------------------------------------
function func_echo()
{
local iam="${0##*/}"
echo "** ${iam} :: ${FUNCNAME[1]}: $*"
return
}
## -----------------------------------------------------------------------
## Intent: Display an error message then exit with status.
## -----------------------------------------------------------------------
function error()
{
local iam="${0##*/}"
echo "ERROR ${iam} :: ${FUNCNAME[1]}: $*"
exit 1
}
## -----------------------------------------------------------------------
## Intent: Verify sandbox/build is versioned for release.
## -----------------------------------------------------------------------
function getGitVersion()
{
declare -n varname="$1"; shift
local __ver # use prefix('__') to protect callers variable name
if [[ -v cached_getGitVersion ]]; then
__ver="$cached_getGitVersion"
varname="$__ver"
return
elif [[ -v argv_gen_version ]]; then
get_version __ver
elif [[ -v WORKSPACE ]] && [[ -v GITHUB_TOKEN ]]; then # i_am_jenkins
local path="$GERRIT_PROJECT"
pushd "$path" || error "pushd GERRIT_PROJECT= failed $(declare -p path)"
__ver="$(git tag -l --points-at HEAD)"
popd || error "popd GERRIT_PROJECT= failed"
elif [[ -v argv_version_file ]]; then # local debug
[[ ! -f VERSION ]] && error "./VERSION file not found"
readarray -t tmp < <(sed -e 's/[[:blank:]]//g' 'VERSION')
__ver="v${tmp[0]}"
else
cd ..
local path="$GERRIT_PROJECT"
pushd "$path" || error "pushd GERRIT_PROJECT= failed $(declare -p path)"
__ver="$(git tag -l --points-at HEAD)"
popd || error "popd GERRIT_PROJECT= failed"
fi
# ------------------------------------------------------
# match bare versions or v-prefixed golang style version
# Critical failure for new/yet-to-be-released repo ?
# ------------------------------------------------------
if [[ "$__ver" =~ ^v?([0-9]+)\.([0-9]+)\.([0-9]+)$ ]]; then
echo "git has a SemVer released version tag: '$__ver'"
echo "Building artifacts for GitHub release."
elif [[ "$__ver" =~ ^v?([0-9]+)\.([0-9]+)\.([0-9]+)-dev([0-9]+)$ ]]; then
# v1.2.3-dev (*-dev*) is an implicit draft release.
declare -i -g draft_release=1
echo "Detected --draft SemVer release version tag [$__ver]"
echo "Building artifacts for GitHub release."
else
error "No SemVer released version tag found, exiting..."
fi
## Cache value for subsequent calls.
## readonly is a guarantee assignment happens once.
declare -g cached_getGitVersion="$__ver"
readonly cached_getGitVersion;
varname="$__ver"
func_echo "Version is [$__ver] from $(/bin/pwd)"
return
}
## -----------------------------------------------------------------------
## Intent:
## Note: Release description is sanitized version of the log message
## -----------------------------------------------------------------------
function getReleaseDescription()
{
declare -n varname="$1"; shift
local msg
msg="$(git log -1 --pretty=%B)"
local val
val="$(tr -dc "[:alnum:]\n\r\.\[\]\:\-\\\/\`\' " <<< "$msg")"
[[ ${#val} -eq 0 ]] && error "Release Description is empty ($msg)"
varname="$val"
return
}
## -----------------------------------------------------------------------
## Intent: Retrieve value of the release temp directory.
## -----------------------------------------------------------------------
## Note: Limit use of globals so logic can be isolated in function calls.
## -----------------------------------------------------------------------
function get_release_dir()
{
declare -n varname=$1; shift
# Temporary staging directory to copy artifacts to
varname="$scratch/release"
mkdir -p "$varname"
return
}
## -----------------------------------------------------------------------
## Intent: Retrieve github server hostname
## -----------------------------------------------------------------------
function get_gh_hostname()
{
declare -n varname=$1; shift
varname+=('--hostname' "${__githost}")
return
}
## -----------------------------------------------------------------------
## Intent: Retrieve repository organizaiton name
## -----------------------------------------------------------------------
function get_gh_repo_org()
{
declare -n ref=$1; shift
declare -g __repo_org
local org
if [[ -v __repo_org ]]; then
org="$__repo_org"
elif [[ ! -v GITHUB_ORGANIZATION ]]; then
error "--repo-org or GITHUB_ORGANIZATION= are required"
else
org="${GITHUB_ORGANIZATION}"
fi
ref="$org"
return
}
## -----------------------------------------------------------------------
## Intent: Retrieve repository organizaiton name
## -----------------------------------------------------------------------
function get_gh_repo_name()
{
declare -n ref=$1; shift
declare -g __repo_name
local name
if [[ -v __repo_name ]]; then
name="$__repo_name"
elif [[ ! -v GERRIT_PROJECT ]]; then
error "--repo-name or GERRIT_PROJECT= are required"
else
name="${GERRIT_PROJECT}"
fi
ref="$name"
return
}
## -----------------------------------------------------------------------
## Intent: Return path for the gh release query
## -----------------------------------------------------------------------
function get_gh_releases()
{
declare -n ref="$1"
local repo_org
get_gh_repo_org repo_org
local repo_name
get_gh_repo_name repo_name
ref="repos/${repo_org}/${repo_name}/releases"
func_echo "ref=$ref"
return
}
## -----------------------------------------------------------------------
## Intent: Retrieve repository path argument
## -----------------------------------------------------------------------
function get_argv_repo()
{
declare -n ref=$1; shift
local repo_org
get_gh_repo_org repo_org
local repo_name
get_gh_repo_name repo_name
ref="${repo_org}/${repo_name}"
# func_echo "ref=$(declare -p ref)"
return
}
## -----------------------------------------------------------------------
## Intent: Retrieve release name string "project - version"
## -----------------------------------------------------------------------
function get_argv_name()
{
declare -n ref=$1; shift
local repo_name
get_gh_repo_name repo_name
local repo_ver
getGitVersion repo_ver
# ref="${repo_name} - $GIT_VERSION"
ref="${repo_name} - ${repo_ver}"
func_echo "ref=$(declare -p ref)"
return
}
## -----------------------------------------------------------------------
## Intent: Retrieve tag version
## -----------------------------------------------------------------------
function get_argv_tag()
{
declare -n ref=$1; shift
# cached_argv_tag='v3.41.3204'
if [[ ! -v cached_argv_tag ]]; then
declare -g cached_argv_tag
if [[ -v GIT_VERSION ]]; then # hello jenkins
cached_argv_tag="$GIT_VERSION"
fi
fi
[[ ${#cached_argv_tag} -eq 0 ]] && error "Unable to determine GIT_VERSION="
ref="$cached_argv_tag"
func_echo "ref=$(declare -p ref)"
return
}
## -----------------------------------------------------------------------
## Intent:
## -----------------------------------------------------------------------
# To support golang projects that require GOPATH to be set and code checked out there
# If $DEST_GOPATH is not an empty string:
# - create GOPATH within WORKSPACE, and destination directory within
# - set PATH to include $GOPATH/bin and the system go binaries
# - move project from $WORKSPACE/$GERRIT_PROJECT to new location in $GOPATH
# - start release process within that directory
## -----------------------------------------------------------------------
function get_release_path()
{
declare -n ref=$1; shift
# shellcheck disable=SC2128
local varpath="$ref"
DEST_GOPATH=${DEST_GOPATH:-}
if [ -n "$DEST_GOPATH" ]; then
mkdir -p "$GOPATH/src/$DEST_GOPATH"
varpath="$GOPATH/src/$DEST_GOPATH/$GERRIT_PROJECT"
mv "$WORKSPACE/$GERRIT_PROJECT" "$varpath"
else
varpath="$WORKSPACE/$GERRIT_PROJECT"
fi
## Verify pwd is OK
for path in \
"${varpath}/Makefile"\
"${varpath}/makefile"\
"__ERROR__"\
; do
case "$path" in
__ERROR__) error "Makefile not found at ${varpath} !" ;;
*) [[ -f "$path" ]] && break ;;
esac
done
return
}
## -----------------------------------------------------------------------
## Intent: Display future enhancements
## -----------------------------------------------------------------------
function todo()
{
local iam="${0##*/}"
cat <<EOT
** -----------------------------------------------------------------------
** IAM: ${iam} :: ${FUNCNAME[0]}
** -----------------------------------------------------------------------
o get_release_path()
- refactor redundant paths into local vars.
- see comments, do we have a one-off failure condition ?
o PATH += golang appended 3 times, release needs a single, reliable answer.
o do_login, do_logout and api calls do not use the my_gh wrapper:
- Add a lookup function to cache and retrieve path to downloaded gh command.
EOT
return
}
## -----------------------------------------------------------------------
## Intent: Verify a directory contains content for release.
## -----------------------------------------------------------------------
## Given:
## scalar Path to release/ directory
## ref Results returned through this indirect var.
## -----------------------------------------------------------------------
## Usage:
## declare -a artifacts=()
## get_artifacts '/foo/bar/tans' artifacts
## declare -p artifacts
## -----------------------------------------------------------------------
function get_artifacts()
{
local dir="$1" ; shift
declare -n refA=$1 ; shift
# Glob available files, exclude checksums
readarray -t __artifacts < <(find "$dir" -mindepth 1 ! -type d \
| grep -iv -e 'sum256' -e 'checksum')
# func_echo "$(declare -p __artifacts)"
# -----------------------------------------------------------------------
# Verify count>0 to inhibit source-only release
# Problem children:
# o build or make release failures.
# o docker container filesystem mount problem (~volume)
# -----------------------------------------------------------------------
[[ ${#__artifacts[@]} -eq 0 ]] \
&& error "Artifact dir is empty: $(declare -p dir)"
# shellcheck disable=SC2034
refA=("${__artifacts[@]}")
return
}
## -----------------------------------------------------------------------
## Intent: Copy files from the build directory into the release staging
## directory for publishing to github releases/ endpoint.
## -----------------------------------------------------------------------
function copyToRelease()
{
banner ''
local artifact_glob="${ARTIFACT_GLOB%/*}"
func_echo "$(declare -p artifact_glob)"
local work
get_release_dir work
func_echo "Artifact dir: $(declare -p work)"
## Verify release content is available
declare -a artifacts=()
# get_artifacts "$work" artifacts
get_artifacts "$artifact_glob" artifacts
func_echo "Artifacts in copy_from: $(declare -p artifacts)"
# Copy artifacts into the release temp dir
# shellcheck disable=SC2086
echo "rsync -rv --checksum \"$artifact_glob/.\" \"$work/.\""
rsync -rv --checksum "$artifact_glob/." "$work/."
get_artifacts "$work" artifacts
func_echo "Artifacts in copy_to: $(declare -p artifacts)"
return
}
## -----------------------------------------------------------------------
## https://docs.github.com/en/rest/releases?apiVersion=2022-11-28
# https://cli.github.com/manual/gh_release_create
# --target <branch> or commit SHA
# --title
# --generate-notes
# --release-notes (notes file)
# --release
# release create dist/*.tgz
# --discussion-category "General"
## -----------------------------------------------------------------------
# https://cli.github.com/manual/gh_release_create
## -----------------------------------------------------------------------
function gh_release_create()
{
banner ''
local version
getGitVersion version
local work
get_release_dir work
declare -a args=()
args+=('--host-repo')
args+=('--title')
if [[ -v draft_release ]]; then
args+=('--draft')
else
args+=('--discussion-category' 'Announcements')
fi
if [[ -v release_notes ]]; then
args+=('--notes-file' "$release_notes")
fi
pushd "$work/.." >/dev/null
# func_echo "WORK=$work"
readarray -t payload < <(find 'release' -maxdepth 4 ! -type d -print)
func_echo "$gh_cmd release create ${version} ${args[*]} ${payload[*]}"
if [[ -v dry_run ]]; then
echo "[SKIP] dry run"
else
func_echo "my_gh release create '$version' ${args[*]} ${payload[*]}"
my_gh 'release' 'create' "$version" "${args[@]}" "${payload[@]}"
fi
popd >/dev/null
return
}
## -----------------------------------------------------------------------
## Intent: Authenticate credentials for a github gh session
## -----------------------------------------------------------------------
## NOTE: my_gh currently unused due to --with-token < "$pac"
## -----------------------------------------------------------------------
function do_login()
{
# shellcheck disable=SC2120
# shellcheck disable=SC2034
local unused="$1"; shift
declare -g pac
declare -a login_args=()
[[ $# -gt 0 ]] && login_args+=("$@")
# https://github.com/cli/cli/issues/2922#issuecomment-775027762
# (sigh) why not quietly return VS forcing a special logic path
# [[ -v WORKSPACE ]] && [[ -v GITHUB_TOKEN ]] && return
# 12:58:36 ** -----------------------------------------------------------------------
# 12:58:36 ** jenkins582353203049151829.sh::do_login: --hostname github.com
# 12:58:36 ** --------------------------------------------------------------------# ---
# 12:58:36 ** jenkins582353203049151829.sh :: do_login: Detected ENV{GITHUB_TOKEN}=
# 12:58:36 The value of the GITHUB_TOKEN environment variable is being used for authentication.
# 12:58:36 To have GitHub CLI store credentials instead, first clear the value from the environment.
# -----------------------------------------------------------------------
get_gh_hostname login_args
banner "${login_args[@]}"
func_echo "$(declare -p WORKSPACE)"
## Read from disk is safer than export GITHUB_TOKEN=
if [[ -v pac ]] && [[ ${#pac} -gt 0 ]]; then # interactive/debugging
[ ! -f "$pac" ] && error "PAC token file $pac does not exist"
func_echo "$gh_cmd auth login ${login_args[*]} --with-token < $pac"
"$gh_cmd" auth login "${login_args[@]}" --with-token < "$pac"
elif [[ ! -v GITHUB_TOKEN ]]; then
error "--token [t] or GITHUB_TOKEN= are required"
else # jenkins
func_echo "$gh_cmd auth login ${login_args[*]} (ie: jenkins)"
# https://github.com/cli/cli/issues/2922#issuecomment-775027762
# When using GITHUB_TOKEN, there is no need to even run gh auth login
# "$gh_cmd" auth login "${login_args[@]}"
fi
declare -i -g active_login=1 # signal logout needed
return
}
## -----------------------------------------------------------------------
## Intent: Destroy credentials/gh session authenticated by do_login
## -----------------------------------------------------------------------
## NOTE: my_gh currently unused due to "<<< 'y'"
## -----------------------------------------------------------------------
function do_logout()
{
declare -i -g active_login
[[ ! -v active_login ]] && return
declare -a logout_args=()
[[ $# -gt 0 ]] && logout_args+=("$@")
get_gh_hostname logout_args
banner "${logout_args[@]}"
func_echo "$gh_cmd auth logout ${logout_args[*]} <<< 'Y'"
"$gh_cmd" auth logout "${logout_args[@]}" <<< 'Y'
unset active_login
return
}
## -----------------------------------------------------------------------
## Intent: Query for repository version strings
## -----------------------------------------------------------------------
function get_releases()
{
declare -n refA="$1"; shift
banner ""
pushd "$scratch" >/dev/null
# gh api repos/{owner}/{repo}/releases
local releases_uri
get_gh_releases releases_uri
# declare -p releases_uri
refA=()
"$gh_cmd" api "$releases_uri" | jq . > 'release.raw'
readarray -t __tmp < <(jq '.[] | "\(.tag_name)"' 'release.raw')
local release
for release in "${__tmp[@]}";
do
release="${release//\"/}"
refA+=("$release")
done
popd >/dev/null
return
}
## -----------------------------------------------------------------------
## Intent: Display repository query strings.
## Indirect: verify authentication and API
## -----------------------------------------------------------------------
function showReleases()
{
declare -a raw=()
get_releases raw
## Sort for display, we may need to prune volume later on
readarray -t releases < <(sort -nr <<<"${raw[*]}")
# IFS=$'\n' releases=($(sort -nr <<<"${raw[*]}"))
# unset IFS
local release
for release in "${releases[@]}";
do
func_echo "$release"
done
return
}
## -----------------------------------------------------------------------
## Intent: Install the gh command line tool locally
## -----------------------------------------------------------------------
function install_gh_binary()
{
banner
pushd "$scratch"
func_echo "Retrieve latest gh download URLs"
local latest="https://github.com/cli/cli/releases/latest"
local tarball="gh.tar.tgz"
readarray -t latest < <(\
curl --silent -qI "$latest" \
| awk -F '/' '/^location/ {print substr($NF, 1, length($NF)-1)}')
declare -p latest
if [ ${#latest[@]} -ne 1 ]; then
error "Unable to determine latest gh package version"
fi
local VER="${latest[0]}"
func_echo "Download latest gh binary"
local url="https://github.com/cli/cli/releases/download/${VER}/gh_${VER#v}_linux_amd64.tar.gz"
func_echo "wget --quiet --output-document='$tarball' '$url'"
wget --quiet --output-document="$tarball" "$url"
func_echo "Unpack tarball"
tar zxf "$tarball"
declare -g gh_cmd
gh_cmd="$(find "${scratch}" -name 'gh' -print)"
#declare -g gh_cmd='/usr/bin/gh'
readonly gh_cmd
func_echo "Command: ${gh_cmd}"
func_echo "Version: $("$gh_cmd" --version)"
popd
return
}
## -----------------------------------------------------------------------
## Intent: Danger Will Robinson
## -----------------------------------------------------------------------
function releaseDelete()
{
declare -n refA=$1; shift
local version="$1"; shift
banner "${refA[@]}"
# declare -a refA=()
refA+=('--host-repo')
refA+=('--yes')
# refA+=('--cleanup-tag')
echo
echo "==========================================================================="
my_gh 'release' 'delete' "$version" "${refA[@]}"
echo "==========================================================================="
echo
showReleases
return
}
## -----------------------------------------------------------------------
## Intent: Copy binaries into temp/release, checksum then publish
## -----------------------------------------------------------------------
function release_staging()
{
local release_temp
get_release_dir release_temp
banner ''
func_echo "Packaging release files"
pushd "$release_temp" >/dev/null \
|| error "pushd failed: dir is [$release_temp]"
declare -a to_release=()
get_artifacts '.' to_release
if false; then
for fyl in "${to_release[@]}";
do
func_echo "sha256sum $fyl > ${fyl}.sha256"
sha256sum "$fyl" > "${fyl}.sha256"
done
fi
# Generate and check checksums
sha256sum -- * | grep -iv -e 'checksum' -e 'sha256' > checksum.SHA256
sha256sum -c < checksum.SHA256
echo
func_echo "Checksums(checksum.SHA256):"
cat checksum.SHA256
if false; then
# Careful with credentials display
get_gh_hostname login_args
banner "gh auth status ${login_args[*]}"
gh auth status "${login_args[@]}"
fi
gh_release_create # publish
popd >/dev/null || error "pushd failed: dir is [$release_temp]"
return
}
## -----------------------------------------------------------------------
## Intent: Normalize common arguments and access to the gh command.
## o Cache path to the gh command
## o Construct a gh command line from given args
## o Command wrapper can provide defaults (--hostname github.com)
## -----------------------------------------------------------------------
## Given:
## scalar Array variable name (declare -n is a reference)
## Return:
## ref gh command line passed back to caller
## Switches:
## --host Pass default github hostname
## --verbose Enable verbose mode
## --version Display command version
## @array Remaining arguments passed as command switches.
## -----------------------------------------------------------------------
## See Also:
## o https://cli.github.com/manual
## -----------------------------------------------------------------------
function my_gh()
{
func_echo "ENTER"
set -x
declare -a cmd=()
cmd+=("$gh_cmd")
## ----------------------
## Construct command line
## ----------------------
# shellcheck disable=SC2034
declare -A action=() # pending operations
declare -a args=() # common gh command line args
while [ $# -gt 0 ]; do
local arg="$1"; shift
func_echo "function arg is [$arg]"
case "$arg" in
# Modes
-*debug)
# shellcheck disable=SC2034
declare -i -g debug=1
;;
-*verbose) args+=('--verbose') ;;
-*hostname)
get_gh_hostname in_args
;;
--host-repo)
local val
get_argv_repo val
# --repo <[HOST/]OWNER/REPO>
args+=('--repo' "${__githost}/${val}")
;;
# args+=('--repo' 'github.com/opencord/bbsim')
--repo)
local val
get_argv_repo val
args+=('--repo' "$val")
;;
--tag)
local val
get_argv_tag val
args+=("$val") # No switch, pass inline
;;
--title)
local val
get_argv_name val
args+=('--title' "'$val'")
;;
*) args+=("$arg") ;;
esac
done
cmd+=("${args[@]}")
echo
declare -p cmd
echo
echo "** Running: ${cmd[*]}"
"${cmd[@]}"
local status=$?
set +x
func_echo "LEAVE"
if [[ $status -eq 0 ]]; then
true
else
false
fi
return
}
## ---------------------------------------------------------------------------
## Intent:
## ---------------------------------------------------------------------------
function usage()
{
cat <<EOH
Usage: $0
Usage: make [options] [target] ...
--help This mesage
--pac Personal Access Token (path to containing file or a string)
--repo-name ex: voltctl
--repo-org ex: opencord
--release-notes [f] Release notes are passed by file argument
[DEBUG]
--gen-version Generate a random release version string.
--git-hostname Git server hostname (default=github.com)
--version-file Read version string from local version file (vs env var)
[MODES]
--debug Enable script debug mode
--draft Create a draft release (vs published)
--dry-run Simulation mode
--todo Display future enhancement list
All other arguments are pass-through to the gh command.
Usage: $0 --draft --repo-org opencord --repo-name voltctl --git-hostname github.com --pac ~/access.pac
EOH
return
}
## ---------------------------------------------------------------------------
## Intent: Parse script command line arguments
## ---------------------------------------------------------------------------
function parse_args()
{
[[ -v DEBUG ]] && func_echo "ENTER"
while [ $# -gt 0 ]; do
local arg="$1"; shift
func_echo "ARGV: $arg"
# shellcheck disable=SC2034
case "$arg" in
-*debug) declare -i -g debug=1 ;;
--draft) declare -i -g draft_release=1 ;;
--dry-run) declare -i -g dry_run=1 ;;
--version-file)
declare -i -g argv_version_file=1
;;
-*gen-version)
declare -g -i argv_gen_version=1
;;
-*git-hostname)
__githost="$1"; shift
;;
-*release-notes)
[[ ! -f "$1" ]] && error "--release-notes: file path required (arg=\"$arg\")"
declare -g release_notes="$1"; shift
;;
-*repo-name)
__repo_name="$1"; shift
;;
-*repo-org)
__repo_org="$1"; shift
;;
-*pac)
declare -g pac="$1"; shift
readonly pac
[[ ! -f "$pac" ]] && error "--token= does not exist ($pac)"
: # nop/true
;;
-*todo) todo ;;
-*help)
usage
exit 0
;;
*) error "Detected unknown argument $arg" ;;
esac
done
return
}
##----------------##
##---] MAIN [---##
##----------------##
iam="${0##*/}"
full_banner
parse_args "$@"
init
install_gh_binary
do_login "$*"
release_path='/dev/null'
get_release_path release_path
declare -p release_path
pushd "$release_path" || error "pushd failed: dir is [$release_path]"
# legacy: getGitVersion "$GERRIT_PROJECT" GIT_VERSION
getGitVersion GIT_VERSION
getReleaseDescription RELEASE_DESCRIPTION
if [[ ! -v release_notes ]]; then
func_echo "Generating release notes from RELEASE_DESCRIPTION"
declare -g release_notes="$scratch/release.notes"
echo "$RELEASE_DESCRIPTION" > "$release_notes"
fi
cat "$release_notes"
cat <<EOM
** -----------------------------------------------------------------------
** GIT VERSION: $(declare -p GIT_VERSION)
** RELEASE_DESCRIPTION: $(declare -p RELEASE_DESCRIPTION)
** RELEASE_TARGETS: $(declare -p RELEASE_TARGETS)
** -----------------------------------------------------------------------
** URL: https://github.com/opencord/bbsim/releases
** -----------------------------------------------------------------------
** Running: make ${RELEASE_TARGETS}
** -----------------------------------------------------------------------
EOM
# build the release, can be multiple space separated targets
# -----------------------------------------------------------------------
# % go build command-line-arguments:
# copying /tmp/go-build4212845548/b001/exe/a.out:
# open release/voltctl-1.8.25-linux-amd64: permission denied
# missing: docker run mkdir
# -----------------------------------------------------------------------
# shellcheck disable=SC2086
make "$RELEASE_TARGETS"
copyToRelease
cat <<EOM
** -----------------------------------------------------------------------
** Create the release:
** 1) Create initial github release with download area.
** 2) Generate checksum.SHA256 for all released files.
** 3) Upload files to complete the release.
** 4) Display released info from github
** -----------------------------------------------------------------------
EOM
showReleases
release_staging
# Useful to display but --draft images use a non-standard subdir identifier.
# showReleaseUrl
popd || error "pushd failed: dir is [$release_path]"
do_logout
# [SEE ALSO]
# -----------------------------------------------------------------------
# https://www.shellcheck.net/wiki/SC2236
# https://docs.github.com/en/rest/releases/releases?apiVersion=2022-11-28#create-a-release
# -----------------------------------------------------------------------
# https://cli.github.com/manual/gh_help_reference
# https://cli.github.com/manual/gh_release
# -----------------------------------------------------------------------
# [EOF]