blob: 447a087d0b163bfeb2777eecb0a3f3c67244a067 [file] [log] [blame]
// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// voltha-2.x e2e tests
// uses kind-voltha to deploy voltha-2.X
// uses bbsim to simulate OLT/ONUs
pipeline {
/* no label, executor is determined by JJB */
agent {
label "${params.buildNode}"
}
options {
timeout(time: 90, unit: 'MINUTES')
}
environment {
KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
VOLTCONFIG="$HOME/.volt/config-minimal"
PATH="$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
TYPE="minimal"
FANCY=0
WITH_SIM_ADAPTERS="n"
WITH_RADIUS="y"
WITH_BBSIM="y"
DEPLOY_K8S="y"
VOLTHA_LOG_LEVEL="DEBUG"
CONFIG_SADIS="external"
BBSIM_CFG="configs/bbsim-sadis-att.yaml"
ROBOT_MISC_ARGS="-d $WORKSPACE/RobotLogs"
}
stages {
stage('Clone kind-voltha') {
steps {
checkout([
$class: 'GitSCM',
userRemoteConfigs: [[
url: "https://gerrit.opencord.org/kind-voltha",
refspec: "${kindVolthaChange}"
]],
branches: [[ name: "master", ]],
extensions: [
[$class: 'WipeWorkspace'],
[$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
[$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
],
])
sh """
if [ '${kindVolthaChange}' != '' ] ; then
cd $WORKSPACE/kind-voltha
git fetch https://gerrit.opencord.org/kind-voltha ${kindVolthaChange} && git checkout FETCH_HEAD
fi
"""
}
}
stage('Clone voltha-system-tests') {
steps {
checkout([
$class: 'GitSCM',
userRemoteConfigs: [[
url: "https://gerrit.opencord.org/voltha-system-tests",
refspec: "${volthaSystemTestsChange}"
]],
branches: [[ name: "${branch}", ]],
extensions: [
[$class: 'WipeWorkspace'],
[$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
[$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
],
])
sh """
if [ '${volthaSystemTestsChange}' != '' ] ; then
cd $WORKSPACE/voltha-system-tests
git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
fi
"""
}
}
// If the repo under test is not kind-voltha
// then download it and checkout the patch
stage('Download Patch') {
when {
expression {
return "${gerritProject}" != 'kind-voltha';
}
}
steps {
checkout([
$class: 'GitSCM',
userRemoteConfigs: [[
url: "https://gerrit.opencord.org/${gerritProject}",
refspec: "${gerritRefspec}"
]],
branches: [[ name: "${branch}", ]],
extensions: [
[$class: 'WipeWorkspace'],
[$class: 'RelativeTargetDirectory', relativeTargetDir: "${gerritProject}"],
[$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
],
])
sh """
pushd $WORKSPACE/${gerritProject}
git fetch https://gerrit.opencord.org/${gerritProject} ${gerritRefspec} && git checkout FETCH_HEAD
echo "Currently on commit: \n"
git log -1 --oneline
popd
"""
}
}
// If the repo under test is kind-voltha we don't need to download it again,
// as we already have it, simply checkout the patch
stage('Checkout kind-voltha patch') {
when {
expression {
return "${gerritProject}" == 'kind-voltha';
}
}
steps {
sh """
cd $WORKSPACE/kind-voltha
git fetch https://gerrit.opencord.org/kind-voltha ${gerritRefspec} && git checkout FETCH_HEAD
"""
}
}
stage('Create K8s Cluster') {
steps {
sh """
cd $WORKSPACE/kind-voltha/
JUST_K8S=y ./voltha up
bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b "$WORKSPACE/kind-voltha/bin"
"""
}
}
stage('Build Images') {
steps {
sh """
make -C $WORKSPACE/voltha-openonu-adapter-go DOCKER_REPOSITORY=voltha/ DOCKER_TAG=citest docker-build
"""
}
}
stage('Push Images') {
steps {
sh '''
docker images | grep citest
for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}"); do echo "Pushing \$image to nodes"; kind load docker-image \$image:citest --name voltha-\$TYPE --nodes voltha-\$TYPE-worker,voltha-\$TYPE-worker2; done
'''
}
}
stage('Deploy Voltha') {
steps {
sh '''
export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} "
IMAGES="adapter_open_onu_go"
for I in \$IMAGES
do
EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never "
done
cd $WORKSPACE/kind-voltha/
echo \$EXTRA_HELM_FLAGS
kail -n voltha -n default > $WORKSPACE/onos-voltha-combined.log &
./voltha up
'''
}
}
stage('Run E2E Tests') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/openonu-go"
}
steps {
sh '''
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR"
export TARGET_DEFAULT=openonu-go-adapter-test
make -C $WORKSPACE/voltha-system-tests \$TARGET_DEFAULT || true
export TARGET_1T8GEM=1t8gem-openonu-go-adapter-test
make -C $WORKSPACE/voltha-system-tests \$TARGET_1T8GEM || true
'''
}
}
stage('Run MIB Upload Tests') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/openonu-go-MIB"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
#source $NAME-env.sh
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} "
export EXTRA_HELM_FLAGS+="--set bbsim.pon=2,bbsim.onu=2,bbsim.controlledActivation=only-onu "
IMAGES="adapter_open_onu_go"
for I in \$IMAGES
do
EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never "
done
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR"
export TARGET_DEFAULT=mib-upload-templating-openonu-go-adapter-test
make -C $WORKSPACE/voltha-system-tests \$TARGET_DEFAULT || true
'''
}
}
stage('DT workflow') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/DTWorkflow"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
#source $NAME-env.sh
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} "
IMAGES="adapter_open_onu_go"
for I in \$IMAGES
do
EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never "
done
# Workflow-specific flags
export WITH_RADIUS=no
export WITH_EAPOL=no
export WITH_DHCP=no
export WITH_IGMP=no
export CONFIG_SADIS="external"
export BBSIM_CFG="configs/bbsim-sadis-dt.yaml"
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR -e PowerSwitch"
# By default, all tests tagged 'sanityDt' are run. This covers basic functionality
# like running through the DT workflow for a single subscriber.
export TARGET=sanity-kind-dt
# If the Gerrit comment contains a line with "functional tests" then run the full
# functional test suite. This covers tests tagged either 'sanityDt' or 'functionalDt'.
# Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
REGEX="functional tests"
if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then
TARGET=functional-single-kind-dt
fi
make -C $WORKSPACE/voltha-system-tests \$TARGET || true
'''
}
}
stage('ATT workflow') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ATTWorkflow"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} "
IMAGES="adapter_open_onu_go"
for I in \$IMAGES
do
EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never "
done
# Workflow-specific flags
export WITH_RADIUS=yes
export WITH_EAPOL=yes
export WITH_BBSIM=yes
export DEPLOY_K8S=yes
export CONFIG_SADIS="external"
export BBSIM_CFG="configs/bbsim-sadis-att.yaml"
if [ "${gerritProject}" = "voltctl" ]; then
export VOLTCTL_VERSION=$(cat $WORKSPACE/voltctl/VERSION)
cp $WORKSPACE/voltctl/voltctl $WORKSPACE/kind-voltha/bin/voltctl
md5sum $WORKSPACE/kind-voltha/bin/voltctl
fi
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR -e PowerSwitch"
# By default, all tests tagged 'sanity' are run. This covers basic functionality
# like running through the ATT workflow for a single subscriber.
export TARGET=sanity-single-kind
# If the Gerrit comment contains a line with "functional tests" then run the full
# functional test suite. This covers tests tagged either 'sanity' or 'functional'.
# Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
REGEX="functional tests"
if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then
TARGET=functional-single-kind
fi
make -C $WORKSPACE/voltha-system-tests \$TARGET || true
'''
}
}
}
post {
always {
sh '''
set +e
cp $WORKSPACE/kind-voltha/install-minimal.log $WORKSPACE/
kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq
kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq
kubectl get nodes -o wide
kubectl get pods -o wide
kubectl get pods -n voltha -o wide
sync
pkill kail || true
md5sum $WORKSPACE/kind-voltha/bin/voltctl
## Pull out errors from log files
extract_errors_go() {
echo
echo "Error summary for $1:"
grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
echo
}
extract_errors_python() {
echo
echo "Error summary for $1:"
grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
echo
}
extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
gzip $WORKSPACE/onos-voltha-combined.log
## shut down kind-voltha
if [ "${branch}" != "master" ]; then
echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
source "$WORKSPACE/kind-voltha/releases/${branch}"
else
echo "on master, using default settings for kind-voltha"
fi
cd $WORKSPACE/kind-voltha
WAIT_ON_DOWN=y ./voltha down
'''
step([$class: 'RobotPublisher',
disableArchiveOutput: false,
logFileName: 'RobotLogs/*/log*.html',
otherFiles: '',
outputFileName: 'RobotLogs/*/output*.xml',
outputPath: '.',
passThreshold: 100,
reportFileName: 'RobotLogs/*/report*.html',
unstableThreshold: 0]);
archiveArtifacts artifacts: '*.log,*.gz'
}
}
}