blob: 5fe292200519180450323d5dee42920e20e94065 [file] [log] [blame]
// Copyright 2019-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// deploy VOLTHA built from patchset on a physical pod and run e2e test
// uses kind-voltha to deploy voltha-2.X
// Need this so that deployment_config has global scope when it's read later
deployment_config = null
localDeploymentConfigFile = null
localKindVolthaValuesFile = null
localSadisConfigFile = null
// The pipeline assumes these variables are always defined
if ( ! params.withPatchset ) {
GERRIT_EVENT_COMMENT_TEXT = ""
GERRIT_PROJECT = ""
GERRIT_CHANGE_NUMBER = ""
GERRIT_PATCHSET_NUMBER = ""
}
pipeline {
/* no label, executor is determined by JJB */
agent {
label "${params.buildNode}"
}
options {
timeout(time: 90, unit: 'MINUTES')
}
environment {
KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
VOLTCONFIG="$HOME/.volt/config-minimal"
PATH="$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
TYPE="minimal"
FANCY=0
//VOL-2194 ONOS SSH and REST ports hardcoded to 30115/30120 in tests
ONOS_SSH_PORT=30115
ONOS_API_PORT=30120
}
stages {
stage ('Initialize') {
steps {
sh returnStdout: false, script: """
test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down
cd $WORKSPACE
rm -rf $WORKSPACE/*
"""
script {
if (env.configRepo && ! env.localConfigDir) {
env.localConfigDir = "$WORKSPACE"
sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configRepo}"
}
localDeploymentConfigFile = "${env.localConfigDir}/${params.deploymentConfigFile}"
localKindVolthaValuesFile = "${env.localConfigDir}/${params.kindVolthaValuesFile}"
localSadisConfigFile = "${env.localConfigDir}/${params.sadisConfigFile}"
}
}
}
stage('Repo') {
steps {
checkout(changelog: true,
poll: false,
scm: [$class: 'RepoScm',
manifestRepositoryUrl: "${params.manifestUrl}",
manifestBranch: "${params.manifestBranch}",
currentBranch: true,
destinationDir: 'voltha',
forceSync: true,
resetFirst: true,
quiet: true,
jobs: 4,
showAllChanges: true]
)
}
}
stage('Get Patch') {
when {
expression { params.withPatchset }
}
steps {
sh returnStdout: false, script: """
cd voltha
PROJECT_PATH=\$(xmllint --xpath "string(//project[@name=\\\"${gerritProject}\\\"]/@path)" .repo/manifest.xml)
repo download "\$PROJECT_PATH" "${gerritChangeNumber}/${gerritPatchsetNumber}"
"""
}
}
stage('Check config files') {
steps {
script {
try {
deployment_config = readYaml file: "${localDeploymentConfigFile}"
} catch (err) {
echo "Error reading ${localDeploymentConfigFile}"
throw err
}
sh returnStdout: false, script: """
if [ ! -e ${localKindVolthaValuesFile} ]; then echo "${localKindVolthaValuesFile} not found"; exit 1; fi
if [ ! -e ${localSadisConfigFile} ]; then echo "${localSadisConfigFile} not found"; exit 1; fi
"""
}
}
}
stage('Create KinD Cluster') {
steps {
sh returnStdout: false, script: """
git clone https://github.com/ciena/kind-voltha.git
cd kind-voltha/
JUST_K8S=y ./voltha up
"""
}
}
stage('Build and Push Images') {
when {
expression { params.withPatchset }
}
steps {
sh returnStdout: false, script: """
if ! [[ "${gerritProject}" =~ ^(voltha-system-tests)\$ ]]; then
make -C $WORKSPACE/voltha/${gerritProject} DOCKER_REPOSITORY=voltha/ DOCKER_TAG=citest docker-build
docker images | grep citest
for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}")
do
echo "Pushing \$image to nodes"
kind load docker-image \$image:citest --name voltha-\$TYPE --nodes voltha-\$TYPE-worker,voltha-\$TYPE-worker2
docker rmi \$image:citest \$image:latest || true
done
fi
"""
}
}
stage('Deploy Voltha') {
environment {
WITH_SIM_ADAPTERS="n"
WITH_RADIUS="y"
DEPLOY_K8S="n"
VOLTHA_LOG_LEVEL="debug"
}
steps {
script {
sh returnStdout: false, script: """
export EXTRA_HELM_FLAGS='--set log_agent.enabled=False -f ${localKindVolthaValuesFile} '
IMAGES=""
if [ "${gerritProject}" = "voltha-go" ]; then
IMAGES="rw_core ro_core "
elif [ "${gerritProject}" = "ofagent-py" ]; then
IMAGES="ofagent "
elif [ "${gerritProject}" = "voltha-onos" ]; then
IMAGES="onos "
elif [ "${gerritProject}" = "voltha-openolt-adapter" ]; then
IMAGES="adapter_open_olt "
elif [ "${gerritProject}" = "voltha-openonu-adapter" ]; then
IMAGES="adapter_open_onu "
elif [ "${gerritProject}" = "voltha-api-server" ]; then
IMAGES="afrouter afrouterd "
else
echo "No images to push"
fi
for I in \$IMAGES
do
EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never "
done
cd $WORKSPACE/kind-voltha/
echo \$EXTRA_HELM_FLAGS
kail -n voltha -n default > $WORKSPACE/onos-voltha-combined.log &
./voltha up
"""
}
}
}
stage('Deploy Kafka Dump Chart') {
steps {
script {
sh returnStdout: false, script: """
helm repo add cord https://charts.opencord.org
helm repo update
helm install -n voltha-kafka-dump cord/voltha-kafka-dump
"""
}
}
}
stage('Push Tech-Profile') {
when {
expression { params.profile != "Default" }
}
steps {
sh returnStdout: false, script: """
etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
kubectl cp $WORKSPACE/voltha/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
"""
}
}
stage('Push Sadis-config') {
steps {
sh returnStdout: false, script: """
curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:$ONOS_API_PORT/onos/v1/network/configuration --data @${localSadisConfigFile}
"""
}
}
stage('Reinstall OLT software') {
when {
expression { params.reinstallOlt }
}
steps {
script {
deployment_config.olts.each { olt ->
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt stop' || true"
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'killall dev_mgmt_daemon' || true"
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
waitUntil {
olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
return olt_sw_present.toInteger() == 0
}
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
waitUntil {
olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
return olt_sw_present.toInteger() == 1
}
if ( olt.fortygig ) {
// If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
}
}
}
}
}
stage('Restart OLT processes') {
steps {
script {
deployment_config.olts.each { olt ->
sh returnStdout: false, script: """
ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt stop' || true
sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'killall dev_mgmt_daemon' || true
sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log'
sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/dev_mgmt_daemon.log'
sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service dev_mgmt_daemon start &'
sleep 5
sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt start &'
"""
waitUntil {
onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
return onu_discovered.toInteger() > 0
}
}
}
}
}
stage('Run E2E Tests') {
environment {
ROBOT_CONFIG_FILE="${localDeploymentConfigFile}"
ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
ROBOT_FILE="Voltha_PODTests.robot"
}
steps {
sh returnStdout: false, script: """
cd voltha
git clone -b ${branch} ${cordRepoUrl}/cord-tester
mkdir -p $WORKSPACE/RobotLogs
# If the Gerrit comment contains a line with "functional tests" then run the full
# functional test suite. This covers tests tagged either 'sanity' or 'functional'.
# Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
REGEX="functional tests"
if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then
ROBOT_MISC_ARGS+="-i functional"
fi
make -C $WORKSPACE/voltha/voltha-system-tests voltha-test || true
"""
}
}
stage('After-Test Delay') {
when {
expression { params.withPatchset }
}
steps {
sh returnStdout: false, script: """
# Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
REGEX="hardware test with delay\$"
[[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]] && sleep 10m || true
"""
}
}
}
post {
always {
sh returnStdout: false, script: '''
set +e
cp kind-voltha/install-minimal.log $WORKSPACE/
kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\t'}{.imageID}{'\\n'}" | sort | uniq -c
kubectl get nodes -o wide
kubectl get pods -o wide
kubectl get pods -n voltha -o wide
sync
pkill kail || true
## Pull out errors from log files
extract_errors_go() {
echo
echo "Error summary for $1:"
grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
echo
}
extract_errors_python() {
echo
echo "Error summary for $1:"
grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
echo
}
extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
gzip $WORKSPACE/onos-voltha-combined.log
## collect events, the chart should be running by now
kubectl get pods | grep -i voltha-kafka-dump | grep -i running
if [[ $? == 0 ]]; then
kubectl exec -it `kubectl get pods | grep -i voltha-kafka-dump | grep -i running | cut -f1 -d " "` ./voltha-dump-events.sh > $WORKSPACE/voltha-events.log
fi
'''
script {
deployment_config.olts.each { olt ->
sh returnStdout: false, script: """
sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/openolt.log $WORKSPACE/openolt-${olt.ip}.log || true
sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.ip}.log # Remove escape sequences
sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log || true
sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log # Remove escape sequences
"""
}
}
step([$class: 'RobotPublisher',
disableArchiveOutput: false,
logFileName: 'RobotLogs/log*.html',
otherFiles: '',
outputFileName: 'RobotLogs/output*.xml',
outputPath: '.',
passThreshold: 100,
reportFileName: 'RobotLogs/report*.html',
unstableThreshold: 0]);
archiveArtifacts artifacts: '*.log,*.gz'
}
}
}