blob: 35a375c3ceec4e2f3946e0aee2d3adc3c2791f23 [file] [log] [blame]
#!/usr/bin/env groovy
// -----------------------------------------------------------------------
// Copyright 2021-2023 Open Networking Foundation (ONF) and the ONF Contributors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
String getIam(String func) {
// Cannot rely on a stack trace due to jenkins manipulation
String src = 'vars/volthaStackDeploy.groovy'
String iam = [src, func].join('::')
return iam
}
// -----------------------------------------------------------------------
// Intent: Log progress message
// -----------------------------------------------------------------------
void enter(String name) {
// Announce ourselves for log usability
String iam = getIam(name)
println("${iam}: ENTER")
return
}
// -----------------------------------------------------------------------
// Intent: Log progress message
// -----------------------------------------------------------------------
void leave(String name) {
// Announce ourselves for log usability
String iam = getIam(name)
println("${iam}: LEAVE")
return
}
// -----------------------------------------------------------------------
// Intent:
// -----------------------------------------------------------------------
void deployVolthaStack(Map cfg) {
enter('deployVolthaStack')
sh(label : "Create VOLTHA Stack ${cfg.stackName}, (namespace=${cfg.volthaNamespace})",
script : """
helm upgrade --install --create-namespace \
-n ${cfg.volthaNamespace} ${cfg.stackName} ${cfg.volthaStackChart} \
--set global.stack_name=${cfg.stackName} \
--set global.voltha_infra_name=voltha-infra \
--set voltha.onos_classic.replicas=${cfg.onosReplica} \
--set voltha.ingress.enabled=true \
--set voltha.ingress.enableVirtualHosts=true \
--set global.voltha_infra_namespace=${cfg.infraNamespace} \
${cfg.extraHelmFlags}
""")
for (int i = 0; i < cfg.bbsimReplica; i++) {
// NOTE we don't need to update the tag for DT
script {
sh(label : "Create config[$i]: bbsimCfg${cfg.stackId}${i}.yaml",
script : "rm -f $WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml",
)
if (cfg.workflow == 'att' || cfg.workflow == 'tt') {
int startingStag = 900
def serviceConfigFile = cfg.workflow // type(?) String
if (cfg.withMacLearning && cfg.workflow == 'tt') {
serviceConfigFile = 'tt-maclearner'
}
// bbsimCfg: type(?) Map
def bbsimCfg = readYaml file: "$WORKSPACE/voltha-helm-charts/examples/${serviceConfigFile}-values.yaml"
// NOTE we assume that the only service that needs a different s_tag is the first one in the list
bbsimCfg['servicesConfig']['services'][0]['s_tag'] = startingStag + i
println "Using BBSim Service config ${bbsimCfg['servicesConfig']}"
writeYaml file: "$WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml", data: bbsimCfg
} else {
// NOTE if it's DT just copy the file over
sh(label : 'DT install',
script : """
cp $WORKSPACE/voltha-helm-charts/examples/${cfg.workflow}-values.yaml \
$WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml
""")
} // if (cfg)
} // script
sh(label : "HELM: Create namespace=${cfg.volthaNamespace} bbsim${i}",
script : """
helm upgrade --install --create-namespace -n ${cfg.volthaNamespace} bbsim${i} ${cfg.bbsimChart} \
--set olt_id="${cfg.stackId}${i}" \
-f $WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml \
${cfg.extraHelmFlags}
""")
} // for
leave('deployVolthaStack')
return
}
// -----------------------------------------------------------------------
// Intent: Wait until the pod completed, meaning ONOS fully deployed
// -----------------------------------------------------------------------
// Todo: Move logic like this into a standalone script.
// Use jenkins stash or native JJB logic to publish out to nodes.
// -----------------------------------------------------------------------
void launchVolthaStack(Map cfg) {
enter('launchVolthaStack')
/* -----------------------------------------------------------------------
* % kubectl get pods
17:40:15 bbsim0-868479698c-z66mk 0/1 ContainerCreating 0 6s
17:40:15 voltha-voltha-adapter-openolt-68c84bf786-z98rh 0/1 Running 0 8s
* % kubectl port-forward --address 0.0.0.0
17:40:15 error: unable to forward port because pod is not running. Current status=Pending
* -----------------------------------------------------------------------
*/
sh(label : "Wait for VOLTHA Stack (stack=${cfg.stackName}, namespace=${cfg.volthaNamespace}) to start",
script : """
cat <<EOM
** -----------------------------------------------------------------------
** Wait for VOLTHA Stack (stack=${cfg.stackName}, namespace=${cfg.volthaNamespace}) to start
** -----------------------------------------------------------------------
EOM
# set -euo pipefail
set +x # # Logs are noisy when commented
declare -i count=0
declare -i debug=1 # uncomment to enable debugging
# declare -i verbose=1 # uncomment to enable debugging
vsd_log='volthaStackDeploy.tmp'
echo > \$vsd_log
declare -i rc=0 # exit status
while true; do
# Gather
kubectl get pods -n ${cfg.volthaNamespace} \
-l app.kubernetes.io/part-of=voltha --no-headers \
> \$vsd_log
count=\$((\$count - 1))
# Display activity every iteration ?
[[ -v verbose ]] && { count=0; }
# Display activity every minute or so {sleep(5) x count=10}
if [[ \$count -lt 1 ]]; then
count=10
cat \$vsd_log
fi
## -----------------------
## Probe for cluster state
## -----------------------
if grep -q -e 'ContainerCreating' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: ContainerCrating active'
[[ -v debug ]] && grep -e 'ContainerCreating' \$vsd_log
elif grep -q -e '0/' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: Waiting for status=Running'
[[ -v debug ]] && grep -e '0/' \$vsd_log
elif ! grep -q '/' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: Waiting for initial pod activity'
[[ ! -v verbose ]] && { cat \$vsd_log; }
# -----------------------------------------------------------------------
# voltha-adapter-openolt-68c84bf786-8xsfc 0/1 CrashLoopBackOff 2 69s
# voltha-adapter-openolt-68c84bf786-8xsfc 0/1 Error 3 85s
# -----------------------------------------------------------------------
elif grep -q 'Error' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: Detected cluster state=Error'
cat \$vsd_log
rc=1 # fatal
break
# -----------------------------------------------------------------------
# An extra conditon needed here but shell coding is tricky:
# "svc x/y Running 0 6s
# Verify (x == y) && (x > 0)
# Wait until job failure/we have an actual need for it.
# -----------------------------------------------------------------------
# Could check for all services 'Running', is that reliable (?)
# -----------------------------------------------------------------------
else
echo -e '\nvolthaStackDeploy.groovy: Voltha stack has launched'
[[ ! -v verbose ]] && { cat \$vsd_log; }
break
fi
## Support argument --timeout (?)
sleep 5
done
rm -f \$vsd_log
exit \$rc
""")
leave('launchVolthaStack')
return
}
// -----------------------------------------------------------------------
// Intent: Wait until the pod completed, meaning ONOS fully deployed
// -----------------------------------------------------------------------
void waitForOnosDeploy(Map cfg) {
enter('waitForOnosDeploy')
sh(label : 'Wait for ONOS full deployment',
script : """
cat <<EOM
** -----------------------------------------------------------------------
** Wait for ONOS full deployment
** -----------------------------------------------------------------------
EOM
# set -euo pipefail
set +x # # Noisy when commented (default: uncommented)
declare -i count=0
declare -i debug=1 # uncomment to enable debugging
# declare -i verbose=1 # uncomment to enable debugging
vsd_log='volthaStackDeploy.tmp'
echo > \$vsd_log
declare -i rc=0 # exit status
while true; do
# Gather -- should we check for count(svc > 1) ?
kubectl get pods -l app=onos-config-loader \
-n ${cfg.infraNamespace} --no-headers \
--field-selector=status.phase=Running \
> \$vsd_log
count=\$((\$count - 1))
# Display activity every iteration ?
[[ -v verbose ]] && { count=0; }
# Display activity every minute or so {sleep(5) x count=10}
if [[ \$count -lt 1 ]]; then
count=10
cat \$vsd_log
fi
## -----------------------
## Probe for cluster state
## -----------------------
if grep -q -e 'ContainerCreating' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: ContainerCrating active'
[[ -v debug ]] && grep -e 'ContainerCreating' \$vsd_log
elif grep -q -e '0/' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: Waiting for status=Running'
[[ -v debug ]] && grep -e '0/' \$vsd_log
elif ! grep -q '/' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: Waiting for initial pod activity'
[[ ! -v verbose ]] && { cat \$vsd_log; }
# -----------------------------------------------------------------------
# voltha-adapter-openolt-68c84bf786-8xsfc 0/1 CrashLoopBackOff 2 69s
# voltha-adapter-openolt-68c84bf786-8xsfc 0/1 Error 3 85s
# -----------------------------------------------------------------------
elif grep -q 'Error' \$vsd_log; then
echo -e '\nvolthaStackDeploy.groovy: Detected cluster state=Error'
cat \$vsd_log
rc=1 # fatal
break
# -----------------------------------------------------------------------
# An extra conditon needed here but shell coding is tricky:
# "svc x/y Running 0 6s
# Verify (x == y) && (x > 0)
# Wait until job failure/we have an actual need for it.
# -----------------------------------------------------------------------
# Could check for all services 'Running', is that reliable (?)
# -----------------------------------------------------------------------
else
echo -e '\nvolthaStackDeploy.groovy: Voltha stack has launched'
[[ ! -v verbose ]] && { cat \$vsd_log; }
break
fi
## Support argument --timeout (?)
sleep 5
done
rm -f \$vsd_log
exit \$rc
""")
leave('waitForOnosDeploy')
return
}
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
void process(Map config) {
enter('process')
// note that I can't define this outside the function as there's no global scope in Groovy
Map defaultConfig = [
bbsimReplica: 1,
infraNamespace: 'infra',
volthaNamespace: 'voltha',
stackName: 'voltha',
stackId: 1, // NOTE this is used to differentiate between BBSims across multiple stacks
workflow: 'att',
withMacLearning: false,
withFttb: false,
extraHelmFlags: '',
localCharts: false,
onosReplica: 1,
adaptersToWait: 2,
]
Map cfg = defaultConfig + config
// Augment config map
cfg.volthaStackChart = 'onf/voltha-stack'
cfg.bbsimChart = 'onf/bbsim'
if (cfg.localCharts) {
cfg.volthaStackChart = "$WORKSPACE/voltha-helm-charts/voltha-stack"
cfg.bbsimChart = "$WORKSPACE/voltha-helm-charts/bbsim"
sh(label : 'HELM: Update voltha-stack deps',
script : """
pushd $WORKSPACE/voltha-helm-charts/voltha-stack
helm dep update
popd
""")
}
println "Deploying VOLTHA Stack with the following parameters: ${cfg}."
deployVolthaStack(cfg)
launchVolthaStack(cfg)
waitForAdapters(cfg)
waitForOnosDeploy(cfg)
leave('process')
return
}
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
def call(Map config=[:]) { // Function return type(?)
try {
enter('main')
process(config)
}
catch (Exception err) { // groovylint-disable-line CatchException
ans = false
println("** volthaStackDeploy.groovy: EXCEPTION ${err}")
throw err
}
finally {
leave('main')
}
return
}
// [EOF]