blob: 1a966077510fc2bbccad35d6fecb8dab7fa8fdc4 [file] [log] [blame]
// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// used to deploy VOLTHA and configure ONOS physical PODs
// NOTE we are importing the library even if it's global so that it's
// easier to change the keywords during a replay
library identifier: 'cord-jenkins-libraries@master',
retriever: modernSCM([
$class: 'GitSCMSource',
remote: 'https://gerrit.opencord.org/ci-management.git'
])
def infraNamespace = "infra"
def volthaNamespace = "voltha"
def clusterName = "kind-ci"
pipeline {
/* no label, executor is determined by JJB */
agent {
label "${params.buildNode}"
}
options {
timeout(time: 120, unit: 'MINUTES')
}
environment {
PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
KUBECONFIG="$HOME/.kube/kind-${clusterName}"
VOLTCONFIG="$HOME/.volt/config"
LOG_FOLDER="$WORKSPACE/${workflow}/"
APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader"
}
stages{
stage('Download Code') {
steps {
getVolthaCode([
branch: "${branch}",
gerritProject: "${gerritProject}",
gerritRefspec: "${gerritRefspec}",
volthaSystemTestsChange: "${volthaSystemTestsChange}",
volthaHelmChartsChange: "${volthaHelmChartsChange}",
])
}
}
stage ("Parse deployment configuration file") {
steps {
sh returnStdout: true, script: "rm -rf ${configBaseDir}"
sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
script {
if (params.workflow.toUpperCase() == "TT") {
error("The Tucson POD does not support TT workflow at the moment")
}
if ( params.workflow.toUpperCase() == "DT" ) {
deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
}
else if ( params.workflow.toUpperCase() == "TT" ) {
deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
}
else {
deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
}
}
}
}
stage('Clean up') {
steps {
timeout(15) {
script {
helmTeardown(["default", infraNamespace, volthaNamespace])
}
timeout(1) {
sh returnStdout: false, script: '''
# remove orphaned port-forward from different namespaces
ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
'''
}
}
}
}
stage('Build patch') {
steps {
// NOTE that the correct patch has already been checked out
// during the getVolthaCode step
buildVolthaComponent("${gerritProject}")
}
}
stage('Create K8s Cluster') {
steps {
script {
def clusterExists = sh returnStdout: true, script: """
kind get clusters | grep ${clusterName} | wc -l
"""
if (clusterExists.trim() == "0") {
createKubernetesCluster([nodes: 3, name: clusterName])
}
}
}
}
stage('Load image in kind nodes') {
steps {
loadToKind()
}
}
stage('Install Voltha') {
steps {
timeout(20) {
script {
imageFlags = getVolthaImageFlags(gerritProject)
// if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
def localCharts = false
if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts") {
localCharts = true
}
def flags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml ${imageFlags} "
// NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
flags = flags + "--set onos-classic.onosSshPort=30115 " +
"--set onos-classic.onosApiPort=30120 " +
"--set onos-classic.onosOfPort=31653 " +
"--set onos-classic.individualOpenFlowNodePorts=true " + extraHelmFlags
volthaDeploy([
workflow: workFlow.toLowerCase(),
extraHelmFlags: flags,
localCharts: localCharts,
kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
onosReplica: 3,
atomixReplica: 3,
kafkaReplica: 3,
etcdReplica: 3,
])
}
// start logging
sh """
rm -rf $WORKSPACE/${workFlow}/
mkdir -p $WORKSPACE/${workFlow}
_TAG=kail-${workFlow} kail -n infra -n voltha > $WORKSPACE/${workFlow}/onos-voltha-combined.log &
"""
sh returnStdout: false, script: '''
# start logging with kail
mkdir -p $LOG_FOLDER
list=($APPS_TO_LOG)
for app in "${list[@]}"
do
echo "Starting logs for: ${app}"
_TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
done
'''
sh """
JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
ps aux | grep port-forward
"""
getPodsInfo("$WORKSPACE")
}
}
}
stage('Deploy Kafka Dump Chart') {
steps {
script {
sh returnStdout: false, script: """
helm repo add cord https://charts.opencord.org
helm repo update
if helm version -c --short|grep v2 -q; then
helm install -n voltha-kafka-dump cord/voltha-kafka-dump
else
helm install voltha-kafka-dump cord/voltha-kafka-dump
fi
"""
}
}
}
stage('Push Tech-Profile') {
when {
expression { params.profile != "Default" }
}
steps {
sh returnStdout: false, script: """
etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
"""
}
}
stage('Push Sadis-config') {
steps {
sh returnStdout: false, script: """
ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
#TRACE in the pipeliner is too chatty, moving to DEBUG
sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.opencord.olt.driver"
sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
if [[ "${workFlow.toUpperCase()}" == "DT" ]]; then
curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
elif [[ "${workFlow.toUpperCase()}" == "TT" ]]; then
curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
else
# this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
fi
"""
}
}
stage('Reinstall OLT software') {
when {
expression { params.reinstallOlt }
}
steps {
script {
deployment_config.olts.each { olt ->
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
waitUntil {
olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
return olt_sw_present.toInteger() == 0
}
if ( params.branch == 'voltha-2.3' ) {
oltDebVersion = oltDebVersionVoltha23
} else {
oltDebVersion = oltDebVersionMaster
}
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
waitUntil {
olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
return olt_sw_present.toInteger() == 1
}
if ( olt.fortygig ) {
// If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
}
}
}
}
}
stage('Restart OLT processes') {
steps {
script {
deployment_config.olts.each { olt ->
sh returnStdout: false, script: """
ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
sleep 120
"""
waitUntil {
onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
return onu_discovered.toInteger() > 0
}
}
}
}
}
stage('Run E2E Tests') {
steps {
script {
// different workflows need different make targets and different robot files
if ( params.workflow.toUpperCase() == "DT" ) {
robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
robotFile = "Voltha_DT_PODTests.robot"
makeTarget = "voltha-dt-test"
robotFunctionalKeyword = "-i functionalDt"
robotDataplaneKeyword = "-i dataplaneDt"
}
else if ( params.workflow.toUpperCase() == "TT" ) {
// TODO the TT tests have diffent tags, address once/if TT is support on the Tucson POD
robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
robotFile = "Voltha_TT_PODTests.robot"
makeTarget = "voltha-tt-test"
robotFunctionalKeyword = "-i functionalTt"
robotDataplaneKeyword = "-i dataplaneTt"
}
else {
robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
robotFile = "Voltha_PODTests.robot"
makeTarget = "voltha-test"
robotFunctionalKeyword = "-i functional"
robotDataplaneKeyword = "-i dataplane"
}
}
sh returnStdout: false, script: """
mkdir -p $WORKSPACE/RobotLogs
export ROBOT_CONFIG_FILE="$WORKSPACE/${robotConfigFile}"
export ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
export ROBOT_FILE="${robotFile}"
# If the Gerrit comment contains a line with "functional tests" then run the full
# functional test suite. This covers tests tagged either 'sanity' or 'functional'.
# Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
REGEX="functional tests"
if [[ "${gerritComment}" =~ \$REGEX ]]; then
ROBOT_MISC_ARGS+="${robotFunctionalKeyword} "
fi
# Likewise for dataplane tests
REGEX="dataplane tests"
if [[ "${gerritComment}" =~ \$REGEX ]]; then
ROBOT_MISC_ARGS+="${robotDataplaneKeyword}"
fi
make -C $WORKSPACE/voltha-system-tests ${makeTarget} || true
"""
}
}
}
post {
always {
// stop logging
sh """
P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workFlow}" | grep -v grep | awk '{print \$1}')"
if [ -n "\$P_IDS" ]; then
echo \$P_IDS
for P_ID in \$P_IDS; do
kill -9 \$P_ID
done
fi
gzip $WORKSPACE/${workFlow}/onos-voltha-combined.log || true
"""
sh '''
# stop the kail processes
list=($APPS_TO_LOG)
for app in "${list[@]}"
do
echo "Stopping logs for: ${app}"
_TAG="kail-$app"
P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
done
'''
step([$class: 'RobotPublisher',
disableArchiveOutput: false,
logFileName: 'RobotLogs/log*.html',
otherFiles: '',
outputFileName: 'RobotLogs/output*.xml',
outputPath: '.',
passThreshold: 100,
reportFileName: 'RobotLogs/report*.html',
unstableThreshold: 0,
onlyCritical: true]);
archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz,**/*.log'
}
}
}
// refs/changes/06/24206/5