| // Copyright 2019-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // deploy VOLTHA built from patchset on a physical pod and run e2e test |
| // uses kind-voltha to deploy voltha-2.X |
| |
| node { |
| // Need this so that deployment_config has global scope when it's read later |
| deployment_config = null |
| localDeploymentConfigFile = null |
| localKindVolthaValuesFile = null |
| localSadisConfigFile = null |
| } |
| |
| pipeline { |
| |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: 60, unit: 'MINUTES') |
| } |
| |
| environment { |
| KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal" |
| VOLTCONFIG="$HOME/.volt/config-minimal" |
| PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$WORKSPACE/kind-voltha/bin" |
| TYPE="minimal" |
| FANCY=0 |
| //VOL-2194 ONOS SSH and REST ports hardcoded to 30115/30120 in tests |
| ONOS_SSH_PORT=30115 |
| ONOS_API_PORT=30120 |
| } |
| |
| stages { |
| stage ('Initialize') { |
| steps { |
| sh returnStdout: false, script: """ |
| test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down |
| cd $WORKSPACE |
| rm -rf $WORKSPACE/* |
| """ |
| script { |
| if (env.configRepo && ! env.localConfigDir) { |
| env.localConfigDir = "$WORKSPACE" |
| sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configRepo}" |
| } |
| localDeploymentConfigFile = "${env.localConfigDir}/${params.deploymentConfigFile}" |
| localKindVolthaValuesFile = "${env.localConfigDir}/${params.kindVolthaValuesFile}" |
| localSadisConfigFile = "${env.localConfigDir}/${params.sadisConfigFile}" |
| } |
| } |
| } |
| |
| stage('Repo') { |
| steps { |
| checkout(changelog: true, |
| poll: false, |
| scm: [$class: 'RepoScm', |
| manifestRepositoryUrl: "${params.manifestUrl}", |
| manifestBranch: "${params.manifestBranch}", |
| currentBranch: true, |
| destinationDir: 'voltha', |
| forceSync: true, |
| resetFirst: true, |
| quiet: true, |
| jobs: 4, |
| showAllChanges: true] |
| ) |
| } |
| } |
| |
| stage('Get Patch') { |
| when { |
| expression { params.withPatchset } |
| } |
| steps { |
| sh returnStdout: false, script: """ |
| cd voltha |
| PROJECT_PATH=\$(xmllint --xpath "string(//project[@name=\\\"${gerritProject}\\\"]/@path)" .repo/manifest.xml) |
| repo download "\$PROJECT_PATH" "${gerritChangeNumber}/${gerritPatchsetNumber}" |
| """ |
| } |
| } |
| |
| stage('Check config files') { |
| steps { |
| script { |
| try { |
| deployment_config = readYaml file: "${localDeploymentConfigFile}" |
| } catch (err) { |
| echo "Error reading ${localDeploymentConfigFile}" |
| throw err |
| } |
| sh returnStdout: false, script: """ |
| if [ ! -e ${localKindVolthaValuesFile} ]; then echo "${localKindVolthaValuesFile} not found"; exit 1; fi |
| if [ ! -e ${localSadisConfigFile} ]; then echo "${localSadisConfigFile} not found"; exit 1; fi |
| """ |
| } |
| } |
| } |
| |
| stage('Create KinD Cluster') { |
| steps { |
| sh returnStdout: false, script: """ |
| git clone https://github.com/ciena/kind-voltha.git |
| cd kind-voltha/ |
| JUST_K8S=y ./voltha up |
| """ |
| } |
| } |
| |
| stage('Build and Push Images') { |
| when { |
| expression { params.withPatchset } |
| } |
| steps { |
| sh returnStdout: false, script: """ |
| if ! [[ "${gerritProject}" =~ ^(voltha-system-tests)\$ ]]; then |
| make -C $WORKSPACE/voltha/${gerritProject} DOCKER_REPOSITORY=voltha/ DOCKER_TAG=citest docker-build |
| docker images | grep citest |
| for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}") |
| do |
| echo "Pushing \$image to nodes" |
| kind load docker-image \$image:citest --name voltha-\$TYPE --nodes voltha-\$TYPE-worker,voltha-\$TYPE-worker2 |
| docker rmi \$image:citest \$image:latest || true |
| done |
| fi |
| """ |
| } |
| } |
| |
| stage('Deploy Voltha') { |
| environment { |
| WITH_SIM_ADAPTERS="n" |
| WITH_RADIUS="y" |
| DEPLOY_K8S="n" |
| VOLTHA_LOG_LEVEL="debug" |
| } |
| steps { |
| script { |
| if ( params.withPatchset ) { |
| sh returnStdout: false, script: """ |
| export EXTRA_HELM_FLAGS='-f ${localKindVolthaValuesFile} ' |
| |
| IMAGES="" |
| if [ "${gerritProject}" = "voltha-go" ]; then |
| IMAGES="rw_core ro_core " |
| elif [ "${gerritProject}" = "ofagent-py" ]; then |
| IMAGES="ofagent " |
| elif [ "${gerritProject}" = "voltha-openolt-adapter" ]; then |
| IMAGES="adapter_open_olt " |
| elif [ "${gerritProject}" = "voltha-openonu-adapter" ]; then |
| IMAGES="adapter_open_onu " |
| elif [ "${gerritProject}" = "voltha-api-server" ]; then |
| IMAGES="afrouter afrouterd " |
| else |
| echo "No images to push" |
| fi |
| |
| for I in \$IMAGES |
| do |
| EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never " |
| done |
| |
| cd $WORKSPACE/kind-voltha/ |
| echo \$EXTRA_HELM_FLAGS |
| ./voltha up |
| """ |
| } else { |
| sh returnStdout: false, script: """ |
| export EXTRA_HELM_FLAGS='-f ${localKindVolthaValuesFile} ' |
| cd $WORKSPACE/kind-voltha/ |
| echo \$EXTRA_HELM_FLAGS |
| ./voltha up |
| """ |
| } |
| } |
| } |
| } |
| |
| stage('Push Tech-Profile') { |
| when { |
| expression { params.profile != "Default" } |
| } |
| steps { |
| sh returnStdout: false, script: """ |
| etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}') |
| kubectl cp $WORKSPACE/voltha/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json |
| kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64' |
| """ |
| } |
| } |
| |
| stage('Push Sadis-config') { |
| steps { |
| sh returnStdout: false, script: """ |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:$ONOS_API_PORT/onos/v1/network/configuration --data @${localSadisConfigFile} |
| """ |
| } |
| } |
| |
| stage('Reinstall OLT software') { |
| when { |
| expression { params.reinstallOlt } |
| } |
| steps { |
| script { |
| deployment_config.olts.each { olt -> |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt stop' || true" |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'killall dev_mgmt_daemon' || true" |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'" |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'" |
| return olt_sw_present.toInteger() == 0 |
| } |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'" |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'" |
| return olt_sw_present.toInteger() == 1 |
| } |
| if ( olt.fortygig ) { |
| // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'" |
| } |
| } |
| } |
| } |
| } |
| |
| stage('Restart OLT processes') { |
| steps { |
| script { |
| deployment_config.olts.each { olt -> |
| sh returnStdout: false, script: """ |
| ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts |
| sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt stop' || true |
| sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'killall dev_mgmt_daemon' || true |
| sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log' |
| sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service dev_mgmt_daemon start &' |
| sleep 5 |
| sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt start &' |
| """ |
| waitUntil { |
| onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'" |
| return onu_discovered.toInteger() > 0 |
| } |
| } |
| } |
| } |
| } |
| |
| stage('Run E2E Tests') { |
| environment { |
| ROBOT_CONFIG_FILE="${localDeploymentConfigFile}" |
| ROBOT_MISC_ARGS="--removekeywords wuks -e bbsim -d $WORKSPACE/RobotLogs" |
| ROBOT_FILE="Voltha_PODTests.robot" |
| } |
| steps { |
| sh returnStdout: false, script: """ |
| cd voltha |
| git clone -b ${branch} ${cordRepoUrl}/cord-tester |
| git clone -b ${branch} ${cordRepoUrl}/voltha # VOL-2104 recommends we get rid of this |
| mkdir -p $WORKSPACE/RobotLogs |
| make -C $WORKSPACE/voltha/voltha-system-tests voltha-test || true |
| """ |
| } |
| } |
| } |
| |
| post { |
| always { |
| sh returnStdout: false, script: """ |
| set +e |
| cp kind-voltha/install-minimal.log $WORKSPACE/ |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\t'}{.imageID}{'\\n'}" | sort | uniq -c |
| kubectl get nodes -o wide |
| kubectl get pods -o wide |
| kubectl get pods -n voltha -o wide |
| ## get default pod logs |
| for pod in \$(kubectl get pods --no-headers | awk '{print \$1}'); |
| do |
| if [[ \$pod == *"onos"* && \$pod != *"onos-service"* ]]; then |
| kubectl logs \$pod onos> $WORKSPACE/\$pod.log; |
| else |
| kubectl logs \$pod> $WORKSPACE/\$pod.log; |
| fi |
| done |
| ## get voltha pod logs |
| for pod in \$(kubectl get pods --no-headers -n voltha | awk '{print \$1}'); |
| do |
| if [[ \$pod == *"-api-"* ]]; then |
| kubectl logs \$pod arouter -n voltha > $WORKSPACE/\$pod.log; |
| elif [[ \$pod == "bbsim-"* ]]; then |
| kubectl logs \$pod -n voltha -p > $WORKSPACE/\$pod.log; |
| else |
| kubectl logs \$pod -n voltha > $WORKSPACE/\$pod.log; |
| fi |
| done |
| """ |
| script { |
| deployment_config.olts.each { olt -> |
| sh returnStdout: false, script: """ |
| sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/openolt.log $WORKSPACE/openolt-${olt.ip}.log || true |
| sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.ip}.log # Remove escape sequences |
| """ |
| } |
| } |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: 'RobotLogs/log*.html', |
| otherFiles: '', |
| outputFileName: 'RobotLogs/output*.xml', |
| outputPath: '.', |
| passThreshold: 80, |
| reportFileName: 'RobotLogs/report*.html', |
| unstableThreshold: 0]); |
| archiveArtifacts artifacts: '*.log' |
| } |
| } |
| } |