| // Copyright 2019-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // deploy VOLTHA using kind-voltha and performs a scale test |
| |
| pipeline { |
| |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: 30, unit: 'MINUTES') |
| } |
| environment { |
| JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done |
| KUBECONFIG="$HOME/.kube/config" |
| VOLTCONFIG="$HOME/.volt/config" |
| SSHPASS="karaf" |
| PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" |
| TYPE="minimal" |
| FANCY=0 |
| WITH_SIM_ADAPTERS="no" |
| WITH_RADIUS="yes" |
| WITH_BBSIM="yes" |
| LEGACY_BBSIM_INDEX="no" |
| DEPLOY_K8S="no" |
| CONFIG_SADIS="external" |
| WITH_KAFKA="kafka.default.svc.cluster.local" |
| WITH_ETCD="etcd.default.svc.cluster.local" |
| VOLTHA_ETCD_PORT=9999 |
| |
| // install everything in the default namespace |
| VOLTHA_NS="default" |
| ADAPTER_NS="default" |
| INFRA_NS="default" |
| BBSIM_NS="default" |
| |
| // configurable options |
| WITH_EAPOL="${withEapol}" |
| WITH_DHCP="${withDhcp}" |
| WITH_IGMP="${withIgmp}" |
| VOLTHA_LOG_LEVEL="${logLevel}" |
| NUM_OF_BBSIM="${olts}" |
| NUM_OF_OPENONU="${openonuAdapterReplicas}" |
| NUM_OF_ONOS="${onosReplicas}" |
| NUM_OF_ATOMIX="${atomixReplicas}" |
| WITH_PPROF="${withProfiling}" |
| EXTRA_HELM_INSTALL_ARGS="${extraHelmFlags} " // note that the trailing space is required to separate the parameters from appends done later |
| VOLTHA_CHART="${volthaChart}" |
| VOLTHA_BBSIM_CHART="${bbsimChart}" |
| VOLTHA_ADAPTER_OPEN_OLT_CHART="${openoltAdapterChart}" |
| VOLTHA_ADAPTER_OPEN_ONU_CHART="${openonuAdapterChart}" |
| } |
| |
| stages { |
| stage ('Cleanup') { |
| steps { |
| timeout(time: 11, unit: 'MINUTES') { |
| sh returnStdout: false, script: """ |
| helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com |
| helm repo add stable https://kubernetes-charts.storage.googleapis.com |
| helm repo add onf https://charts.opencord.org |
| helm repo add cord https://charts.opencord.org |
| helm repo add onos https://charts.onosproject.org |
| helm repo add atomix https://charts.atomix.io |
| helm repo add bbsim-sadis https://ciena.github.io/bbsim-sadis-server/charts |
| helm repo update |
| |
| # removing ETCD port forward |
| P_ID="\$(ps e -ww -A | grep "_TAG=etcd-port-forward" | grep -v grep | awk '{print \$1}')" |
| if [ -n "\$P_ID" ]; then |
| kill -9 \$P_ID |
| fi |
| |
| for hchart in \$(helm list -q | grep -E -v 'docker-registry|kafkacat'); |
| do |
| echo "Purging chart: \${hchart}" |
| helm delete "\${hchart}" |
| done |
| bash /home/cord/voltha-scale/wait_for_pods.sh |
| |
| test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down |
| |
| cd $WORKSPACE |
| rm -rf $WORKSPACE/* |
| """ |
| } |
| } |
| } |
| stage('Clone kind-voltha') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ url: "https://gerrit.opencord.org/kind-voltha", ]], |
| branches: [[ name: "master", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| script { |
| sh(script:""" |
| if [ '${kindVolthaChange}' != '' ] ; then |
| cd $WORKSPACE/kind-voltha; |
| git fetch https://gerrit.opencord.org/kind-voltha ${volthaSystemTestsChange} && git checkout FETCH_HEAD |
| fi |
| """) |
| } |
| } |
| } |
| stage('Clone voltha-system-tests') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ url: "https://gerrit.opencord.org/voltha-system-tests", ]], |
| branches: [[ name: "${release}", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| script { |
| sh(script:""" |
| if [ '${volthaSystemTestsChange}' != '' ] ; then |
| cd $WORKSPACE/voltha-system-tests; |
| git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD |
| fi |
| """) |
| } |
| } |
| } |
| stage('Deploy common infrastructure') { |
| // includes monitoring, kafka, etcd |
| steps { |
| sh ''' |
| helm install kafka incubator/kafka --set replicas=3 --set persistence.enabled=false --set zookeeper.replicaCount=3 --set zookeeper.persistence.enabled=false |
| |
| # the ETCD chart use "auth" for resons different than BBsim, so strip that away |
| ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g' |
| ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} " |
| helm install -f $WORKSPACE/kind-voltha/minimal-values.yaml --set etcd.replicas=3 etcd etcd/etcd $ETCD_FLAGS |
| |
| if [ ${withMonitoring} = true ] ; then |
| helm install nem-monitoring cord/nem-monitoring \ |
| -f $HOME/voltha-scale/grafana.yaml \ |
| --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \ |
| --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false |
| fi |
| |
| # TODO download this file from https://github.com/opencord/helm-charts/blob/master/scripts/wait_for_pods.sh |
| bash /home/cord/voltha-scale/wait_for_pods.sh |
| ''' |
| } |
| } |
| stage('Deploy Voltha') { |
| steps { |
| script { |
| sh returnStdout: false, script: """ |
| |
| cd $WORKSPACE/kind-voltha/ |
| |
| export EXTRA_HELM_INSTALL_ARGS+=' ' |
| |
| if [ '${release}' == 'master' ]; then |
| # BBSim custom image handling |
| IFS=: read -r bbsimRepo bbsimTag <<< ${bbsimImg} |
| EXTRA_HELM_INSTALL_ARGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag " |
| |
| # VOLTHA and ofAgent custom image handling |
| IFS=: read -r rwCoreRepo rwCoreTag <<< ${rwCoreImg} |
| IFS=: read -r ofAgentRepo ofAgentTag <<< ${ofAgentImg} |
| EXTRA_HELM_INSTALL_ARGS+="--set images.rw_core.repository=\$rwCoreRepo,images.rw_core.tag=\$rwCoreTag,images.ofagent.repository=\$ofAgentRepo,images.ofagent.tag=\$ofAgentTag " |
| |
| # OpenOLT custom image handling |
| IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< ${openoltAdapterImg} |
| EXTRA_HELM_INSTALL_ARGS+="--set images.adapter_open_olt.repository=\$openoltAdapterRepo,images.adapter_open_olt.tag=\$openoltAdapterTag " |
| |
| # OpenONU custom image handling |
| IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< ${openonuAdapterImg} |
| EXTRA_HELM_INSTALL_ARGS+="--set images.adapter_open_onu.repository=\$openonuAdapterRepo,images.adapter_open_onu.tag=\$openonuAdapterTag " |
| |
| # ONOS custom image handling |
| IFS=: read -r onosRepo onosTag <<< ${onosImg} |
| EXTRA_HELM_INSTALL_ARGS+="--set images.onos.repository=\$onosRepo,images.onos.tag=\$onosTag " |
| else |
| source $WORKSPACE/kind-voltha/releases/${release} |
| fi |
| |
| # set BBSim parameters |
| EXTRA_HELM_INSTALL_ARGS+='--set enablePerf=true,pon=${pons},onu=${onus} ' |
| |
| # disable the securityContext, this is a development cluster |
| EXTRA_HELM_INSTALL_ARGS+='--set securityContext.enabled=false ' |
| |
| # No persistent-volume-claims in Atomix |
| EXTRA_HELM_INSTALL_ARGS+="--set atomix.persistence.enabled=false " |
| |
| ./voltha up |
| |
| # Forward the ETCD port onto $VOLTHA_ETCD_PORT |
| _TAG=etcd-port-forward kubectl port-forward --address 0.0.0.0 -n default service/etcd $VOLTHA_ETCD_PORT:2379& |
| """ |
| } |
| // bbsim-sadis server takes a while to cache the subscriber entries |
| // wait for that before starting the tests |
| sleep(120) |
| } |
| } |
| stage('Configuration') { |
| steps { |
| sh ''' |
| # Always deactivate org.opencord.kafka |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.kafka |
| |
| #Setting link discovery |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP} |
| |
| #Setting LOG level to ${logLevel} |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set ${logLevel} |
| kubectl exec $(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print $1}') -- bbsimctl log ${logLevel} false |
| |
| # Set Flows/Ports/Meters poll frequency |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval} |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval} |
| |
| if [ ${withEapol} = false ] || [ ${withFlows} = false ]; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.aaa |
| fi |
| |
| if [ ${withDhcp} = false ] || [ ${withFlows} = false ]; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.dhcpl2relay |
| fi |
| |
| if [ ${withIgmp} = false ] || [ ${withFlows} = false ]; then |
| # FIXME will actually affected the tests only after VOL-3054 is addressed |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.igmpproxy |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.mcast |
| fi |
| |
| if [ ${withFlows} = false ]; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt |
| fi |
| |
| if [ ${withMibTemplate} = true ] ; then |
| rm -f BBSM-12345123451234512345-00000000000001-v1.json |
| wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json |
| cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it $(kubectl get pods -l app=etcd | awk 'NR==2{print $1}') etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001 |
| fi |
| |
| # Start the tcp-dump in ofagent |
| if [ ${withPcap} = true ] ; then |
| export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') |
| kubectl exec $OF_AGENT -- apk update |
| kubectl exec $OF_AGENT -- apk add tcpdump |
| kubectl exec $OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump |
| _TAG=ofagent-tcpdump kubectl exec $OF_AGENT -- tcpdump -nei eth0 -w out.pcap& |
| fi |
| ''' |
| } |
| } |
| stage('Run Test') { |
| steps { |
| sh ''' |
| mkdir -p $WORKSPACE/RobotLogs |
| cd $WORKSPACE/voltha-system-tests |
| make vst_venv |
| ''' |
| sh ''' |
| if [ ${withProfiling} = true ] ; then |
| mkdir -p $WORKSPACE/logs/pprof |
| echo $PATH |
| #Creating Python script for ONU Detection |
| cat << EOF > $WORKSPACE/pprof.sh |
| timestamp() { |
| date +"%T" |
| } |
| |
| i=0 |
| while [[ true ]]; do |
| ((i++)) |
| ts=$(timestamp) |
| go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $WORKSPACE/logs/pprof/rw-core-heap-\\$i-\\$ts.png |
| go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $WORKSPACE/logs/pprof/rw-core-goroutine-\\$i-\\$ts.png |
| curl -o $WORKSPACE/logs/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10 |
| go tool pprof -png $WORKSPACE/logs/pprof/rw-core-profile-\\$i-\\$ts.pprof > $WORKSPACE/logs/pprof/rw-core-profile-\\$i-\\$ts.png |
| |
| go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $WORKSPACE/logs/pprof/openolt-heap-\\$i-\\$ts.png |
| go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $WORKSPACE/logs/pprof/openolt-goroutine-\\$i-\\$ts.png |
| curl -o $WORKSPACE/logs/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10 |
| go tool pprof -png $WORKSPACE/logs/pprof/openolt-profile-\\$i-\\$ts.pprof > $WORKSPACE/logs/pprof/openolt-profile-\\$i-\\$ts.png |
| |
| go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $WORKSPACE/logs/pprof/ofagent-heap-\\$i-\\$ts.png |
| go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $WORKSPACE/logs/pprof/ofagent-goroutine-\\$i-\\$ts.png |
| curl -o $WORKSPACE/logs/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10 |
| go tool pprof -png $WORKSPACE/logs/pprof/ofagent-profile-\\$i-\\$ts.pprof > $WORKSPACE/logs/pprof/ofagent-profile-\\$i-\\$ts.png |
| |
| sleep 10 |
| done |
| EOF |
| |
| _TAG="pprof" |
| _TAG=$_TAG bash $WORKSPACE/pprof.sh & |
| fi |
| ''' |
| timeout(time: 11, unit: 'MINUTES') { |
| sh ''' |
| ROBOT_PARAMS="-v olt:${olts} \ |
| -v pon:${pons} \ |
| -v onu:${onus} \ |
| -v workflow:${workflow} \ |
| -v withEapol:${withEapol} \ |
| -v withDhcp:${withDhcp} \ |
| -v withIgmp:${withIgmp} \ |
| --noncritical non-critical \ |
| -e teardown " |
| |
| if [ ${withEapol} = false ] ; then |
| ROBOT_PARAMS+="-e authentication " |
| fi |
| |
| if [ ${withDhcp} = false ] ; then |
| ROBOT_PARAMS+="-e dhcp " |
| fi |
| |
| if [ ${provisionSubscribers} = false ] ; then |
| # if we're not considering subscribers then we don't care about authentication and dhcp |
| ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp " |
| fi |
| |
| if [ ${withFlows} = false ] ; then |
| ROBOT_PARAMS+="-i setup -i activation " |
| fi |
| |
| cd $WORKSPACE/voltha-system-tests |
| source ./vst_venv/bin/activate |
| robot -d $WORKSPACE/RobotLogs \ |
| $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot |
| ''' |
| } |
| } |
| } |
| } |
| post { |
| always { |
| // collect result, done in the "post" step so it's executed even in the |
| // event of a timeout in the tests |
| sh ''' |
| |
| if [ ${withPcap} = true ] ; then |
| # stop ofAgent tcpdump |
| P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')" |
| if [ -n "\$P_ID" ]; then |
| kill -9 \$P_ID |
| fi |
| |
| # copy the file |
| export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') |
| kubectl cp $OF_AGENT:out.pcap $WORKSPACE/logs/ofagent.pcap |
| fi |
| |
| cd voltha-system-tests |
| source ./vst_venv/bin/activate |
| python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt |
| cat $WORKSPACE/execution-time.txt |
| ''' |
| sh ''' |
| if [ ${withProfiling} = true ] ; then |
| _TAG="pprof" |
| P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')" |
| if [ -n "$P_IDS" ]; then |
| echo $P_IDS |
| for P_ID in $P_IDS; do |
| kill -9 $P_ID |
| done |
| fi |
| fi |
| ''' |
| plot([ |
| csvFileName: 'scale-test.csv', |
| csvSeries: [ |
| [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| ], |
| group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true |
| ]) |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: 'RobotLogs/log.html', |
| otherFiles: '', |
| outputFileName: 'RobotLogs/output.xml', |
| outputPath: '.', |
| passThreshold: 100, |
| reportFileName: 'RobotLogs/report.html', |
| unstableThreshold: 0]); |
| // get all the logs from kubernetes PODs |
| sh returnStdout: false, script: ''' |
| LOG_FOLDER=$WORKSPACE/logs |
| mkdir -p $LOG_FOLDER |
| |
| # store information on running charts |
| helm ls > $LOG_FOLDER/helm-list.txt |
| |
| # store information on the running pods |
| kubectl get pods -o wide > $LOG_FOLDER/pods.txt |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt |
| |
| # log in individual files for all the container that match the selector app=$APP_TO_LOG |
| APPS_TO_LOG=(etcd kafka onos adapter-open-onu adapter-open-olt rw-core ofagent bbsim) |
| for app in "${APPS_TO_LOG[@]}" |
| do |
| echo "Getting logs for: ${app}" |
| kubectl get pods -l app=${app} -o=jsonpath=\"{.items[*]['metadata.name']}\" |
| printf '%s\n' $(kubectl get pods -l app=$app -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I@ bash -c "kubectl logs @ > $LOG_FOLDER/@.log" |
| |
| # Get the logs from the previous POD if any (useful in case of restarts) |
| printf '%s\n' $(kubectl get pods -l app=$app -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I@ bash -c "kubectl logs -p @ > $LOG_FOLDER/@-previous.log" || true |
| done |
| |
| # copy the ONOS logs directly from the container to avoid the color codes |
| # TODO remove hardcoded karaf version |
| printf '%s\n' $(kubectl get pods -l app=onos-onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I@ bash -c "kubectl cp @:${karafHome}/data/log/karaf.log $LOG_FOLDER/@.log" |
| ''' |
| // dump all the BBSim(s) ONU information |
| sh ''' |
| BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}') |
| IDS=($BBSIM_IDS) |
| |
| for bbsim in "${IDS[@]}" |
| do |
| kubectl exec -t $bbsim bbsimctl onu list > $WORKSPACE/logs/$bbsim-device-list.txt |
| done |
| ''' |
| // get ONOS debug infos |
| sh ''' |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $WORKSPACE/logs/onos-ports-list.txt |
| |
| if [ ${withFlows} = true ] ; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $WORKSPACE/logs/onos-olt-list.txt |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $WORKSPACE/logs/onos-flows-list.txt |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $WORKSPACE/logs/onos-meters-list.txt |
| fi |
| |
| if [ ${provisionSubscribers} = true ]; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $WORKSPACE/logs/onos-programmed-subscribers.txt |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $WORKSPACE/logs/onos-programmed-meters.txt |
| fi |
| |
| if [ ${withEapol} = true ] ; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $WORKSPACE/logs/onos-aaa-users.txt |
| fi |
| |
| if [ ${withDhcp} = true ] ; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $WORKSPACE/logs/onos-dhcp-allocations.txt |
| fi |
| ''' |
| // collect etcd metrics |
| sh ''' |
| mkdir $WORKSPACE/etcd-metrics |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json |
| ''' |
| // get VOLTHA debug infos |
| script { |
| try { |
| sh ''' |
| voltctl -m 8MB device list -o json > $WORKSPACE/logs/device-list.json |
| python -m json.tool $WORKSPACE/logs/device-list.json > $WORKSPACE/logs/voltha-devices-list.json |
| rm $WORKSPACE/logs/device-list.json |
| voltctl -m 8MB device list > $WORKSPACE/logs/voltha-devices-list.txt |
| |
| printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I@ bash -c "voltctl -m 8MB device flows @ > $WORKSPACE/logs/voltha-device-flows-@.txt" |
| printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I@ bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' @ > $WORKSPACE/logs/voltha-device-ports-@.txt" |
| |
| printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I@ bash -c "voltctl -m 8MB logicaldevice flows @ > $WORKSPACE/logs/voltha-logicaldevice-flows-@.txt" |
| printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I@ bash -c "voltctl -m 8MB logicaldevice port list @ > $WORKSPACE/logs/voltha-logicaldevice-ports-@.txt" |
| ''' |
| } catch(e) { |
| sh ''' |
| echo "Can't get device list from voltclt" |
| ''' |
| } |
| } |
| // get cpu usage by container |
| sh ''' |
| cd $WORKSPACE/voltha-system-tests |
| source ./vst_venv/bin/activate |
| sleep 60 # we have to wait for prometheus to collect all the information |
| python tests/scale/sizing.py -o $WORKSPACE/plots |
| ''' |
| archiveArtifacts artifacts: 'kind-voltha/install-minimal.log,execution-time.txt,logs/*,logs/pprof/*,RobotLogs/*,plots/*.txt,plots/*.pdf,etcd-metrics/*' |
| } |
| } |
| } |