| // Copyright 2021-2023 Open Networking Foundation (ONF) and the ONF Contributors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // voltha-2.x e2e tests for openonu-go |
| // uses bbsim to simulate OLT/ONUs |
| |
| // [TODO] Update syntax below to the latest supported |
| library identifier: 'cord-jenkins-libraries@master', |
| retriever: modernSCM([ |
| $class: 'GitSCMSource', |
| remote: 'https://gerrit.opencord.org/ci-management.git' |
| ]) |
| |
| //------------------// |
| //---] GLOBAL [---// |
| //------------------// |
| String clusterName = 'kind-ci' // was def |
| |
| // ----------------------------------------------------------------------- |
| // Intent: |
| // ----------------------------------------------------------------------- |
| String branchName() { |
| String name = 'voltha-2.12' |
| |
| // [TODO] Sanity check the target branch |
| // if (name != jenkins.branch) { fatal } |
| return(name) |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Due to lack of a reliable stack trace, construct a literal. |
| // Jenkins will re-write the call stack for serialization. |
| // ----------------------------------------------------------------------- |
| String getIam(String func) { |
| String branchName = branchName() |
| String src = [ |
| 'ci-management', |
| 'jjb', |
| 'pipeline', |
| 'voltha', |
| branchName, |
| 'bbsim-tests.groovy' |
| ].join('/') |
| |
| String name = [src, func].join('::') |
| return(name) |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Determine if working on a release branch. |
| // Note: Conditional is legacy, should also check for *-dev or *-pre |
| // ----------------------------------------------------------------------- |
| Boolean isReleaseBranch(String name) { |
| // List modifiers = ['-dev', '-pre', 'voltha-x.y.z-pre'] |
| // if branchName in modifiers |
| return(name != 'master') // OR branchName.contains('-') |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: |
| // ----------------------------------------------------------------------- |
| void execute_test(testTarget, workflow, testLogging, teardown, testSpecificHelmFlags='') { |
| String infraNamespace = 'default' |
| String volthaNamespace = 'voltha' |
| String logsDir = "$WORKSPACE/${testTarget}" |
| |
| stage('IAM') |
| { |
| script |
| { |
| // Announce ourselves for log usability |
| String iam = getIam('execute_test') |
| println("${iam}: ENTER") |
| println("${iam}: LEAVE") |
| } |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Cleanup stale port-forwarding |
| // ----------------------------------------------------------------------- |
| stage('Cleanup') { |
| if (teardown) { |
| timeout(15) { |
| script { |
| helmTeardown(['default', infraNamespace, volthaNamespace]) |
| } |
| } // timeout |
| |
| timeout(5) { |
| script { |
| String iam = getIam('Cleanup') |
| println("${iam}: ENTER") |
| |
| // remove orphaned port-forward from different namespaces |
| String proc = 'port-forw' |
| pgrep_proc(proc) |
| pkill_proc(proc) |
| pgrep_proc(proc) // proc count == 0 |
| println("${iam}: LEAVE") |
| } // script |
| } // timeout |
| } // teardown |
| } // stage('Cleanup') |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| stage('Deploy common infrastructure') { |
| script { |
| local dashargs = [ |
| 'kpi_exporter.enabled=false', |
| 'dashboards.xos=false', |
| 'dashboards.onos=false', |
| 'dashboards.aaa=false', |
| 'dashboards.voltha=false', |
| ].join(',') |
| |
| local promargs = [ |
| 'prometheus.alertmanager.enabled=false', |
| 'prometheus.pushgateway.enabled=false', |
| ].join(',') |
| |
| sh(""" |
| helm repo add onf https://charts.opencord.org |
| helm repo update |
| |
| echo -e "\nwithMonitoring=[$withMonitoring]" |
| if [ ${withMonitoring} = true ] ; then |
| helm install nem-monitoring onf/nem-monitoring \ |
| --set ${promargs} \ |
| --set ${dashargs} |
| fi |
| """) |
| } // script |
| } // stage('Deploy Common Infra') |
| |
| // ----------------------------------------------------------------------- |
| // [TODO] Check onos_log output |
| // ----------------------------------------------------------------------- |
| stage('Deploy Voltha') { |
| if (teardown) { |
| timeout(10) { |
| script { |
| String iam = getIam('Deploy Voltha') |
| String onosLog = "${logsDir}/onos-voltha-startup-combined.log" |
| sh(""" |
| mkdir -p ${logsDir} |
| touch "$onosLog" |
| echo "** kail-startup ENTER: \$(date)" > "$onosLog" |
| |
| # Intermixed output (tee -a &) may get conflusing but let(s) see |
| # what messages are logged during startup. |
| # _TAG=kail-startup kail -n ${infraNamespace} -n ${volthaNamespace} >> "$onosLog" & |
| _TAG=kail-startup kail -n ${infraNamespace} -n ${volthaNamespace} | tee -a "$onosLog" & |
| """) |
| |
| // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts |
| Boolean localCharts = false |
| |
| if (volthaHelmChartsChange != '' |
| || gerritProject == 'voltha-helm-charts' |
| || isReleaseBranch(branch) // branch != 'master' |
| ) { |
| localCharts = true |
| } |
| |
| String branchName = branchName() |
| Boolean isRelease = isReleaseBranch(branch) |
| println([ |
| " ** localCharts=${localCharts}", |
| "branchName=${branchName}", |
| "branch=${branch}", |
| "branch=isReleaseBranch=${isRelease}", |
| ].join(', ')) |
| |
| // ----------------------------------------------------------------------- |
| // Rewrite localHelmFlags using array join, moving code around and |
| // refactoring into standalone functions |
| // ----------------------------------------------------------------------- |
| // hudson.remoting.ProxyException: groovy.lang.MissingMethodException: |
| // No signature of method: java.lang.String.positive() is applicable for argument types: () values: [] |
| // ----------------------------------------------------------------------- |
| // NOTE temporary workaround expose ONOS node ports |
| // ----------------------------------------------------------------------- |
| String localHelmFlags = [ |
| extraHelmFlags.trim(), |
| "--set global.log_level=${logLevel.toUpperCase()}", |
| '--set onos-classic.onosSshPort=30115', |
| '--set onos-classic.onosApiPort=30120', |
| '--set onos-classic.onosOfPort=31653', |
| '--set onos-classic.individualOpenFlowNodePorts=true', |
| testSpecificHelmFlags |
| ].join(' ') |
| |
| println("** ${iam} localHelmFlags = ${localHelmFlags}") |
| |
| if (gerritProject != '') { |
| localHelmFlags = "${localHelmFlags} " + getVolthaImageFlags("${gerritProject}") |
| } |
| |
| println("** ${iam}: ENTER") |
| volthaDeploy([ |
| infraNamespace: infraNamespace, |
| volthaNamespace: volthaNamespace, |
| workflow: workflow.toLowerCase(), |
| withMacLearning: enableMacLearning.toBoolean(), |
| extraHelmFlags: localHelmFlags, |
| localCharts: localCharts, |
| bbsimReplica: olts.toInteger(), |
| dockerRegistry: registry, |
| ]) |
| println("** ${iam}: LEAVE") |
| } // script |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Replacing P_IDS with pgrep/pkill is a step forward. |
| // Why not simply use a pid file, capture _TAG=kail-startup above |
| // Grep runs the risk of terminating stray commands (??-good <=> bad-??) |
| // ----------------------------------------------------------------------- |
| script { |
| String proc = '_TAG=kail-startup' |
| |
| println("${iam}: ENTER") |
| println("${iam}: Shutdown process $proc") |
| pgrep_proc(proc) |
| pkill_proc(proc) |
| pgrep_proc(proc) |
| println("${iam}: LEAVE") |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Bundle onos-voltha / kail logs |
| // ----------------------------------------------------------------------- |
| sh(""" |
| cat <<EOM |
| |
| ** ----------------------------------------------------------------------- |
| ** Combine an compress voltha startup log(s) |
| ** ----------------------------------------------------------------------- |
| EOM |
| pushd "${logsDir}" || { echo "ERROR: pushd $logsDir failed"; exit 1; } |
| gzip -k onos-voltha-startup-combined.log |
| rm onos-voltha-startup-combined.log |
| popd |
| """) |
| } // timeout(10) |
| |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| sh """ |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"& |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"& |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"& |
| bbsimDmiPortFwd=50075 |
| for i in {0..${olts.toInteger() - 1}}; do |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="bbsim\${i}" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/bbsim\${i} \${bbsimDmiPortFwd}:50075; done"& |
| ((bbsimDmiPortFwd++)) |
| done |
| if [ ${withMonitoring} = true ] ; then |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="nem-monitoring-prometheus-server" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n default svc/nem-monitoring-prometheus-server 31301:80; done"& |
| fi |
| ps aux | grep port-forward |
| """ |
| |
| script { |
| String proc = 'port-forward' |
| |
| println("${iam}: ENTER") |
| println("Display spawned ${proc}") |
| pgrep_proc(proc) |
| println("${iam}: LEAVE") |
| } |
| |
| // setting ONOS log level |
| script { |
| println('** setOnosLogLevels: ENTER') |
| setOnosLogLevels([ |
| onosNamespace: infraNamespace, |
| apps: [ |
| 'org.opencord.dhcpl2relay', |
| 'org.opencord.olt', |
| 'org.opencord.aaa', |
| 'org.opencord.maclearner', |
| 'org.onosproject.net.flowobjective.impl.FlowObjectiveManager', |
| 'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager' |
| ], |
| logLevel: logLevel |
| ]) |
| println('** setOnosLogLevels: LEAVE') |
| } // script |
| } // if (teardown) |
| } // stage('Deploy Voltha') |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| stage("Run test ${testTarget} on workflow ${workflow}") |
| { |
| sh """ |
| echo -e "\n** Monitor using mem_consumption.py ?" |
| |
| if [ ${withMonitoring} = true ] ; then |
| cat <<EOM |
| |
| ** ----------------------------------------------------------------------- |
| ** Monitoring memory usage with mem_consumption.py |
| ** ----------------------------------------------------------------------- |
| EOM |
| mkdir -p "$WORKSPACE/voltha-pods-mem-consumption-${workflow}" |
| cd "$WORKSPACE/voltha-system-tests" |
| |
| echo '** Installing python virtualenv' |
| make venv-activate-patched |
| |
| set +u && source .venv/bin/activate && set -u |
| # Collect initial memory consumption |
| python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption-${workflow} -a 0.0.0.0:31301 -n ${volthaNamespace} |
| fi |
| |
| echo -e '** Monitor memory consumption: LEAVE\n' |
| """ |
| |
| sh """ |
| echo -e "\n** make testTarget=[${testTarget}]" |
| mkdir -p ${logsDir} |
| export ROBOT_MISC_ARGS="-d ${logsDir} ${params.extraRobotArgs} " |
| ROBOT_MISC_ARGS+="-v ONOS_SSH_PORT:30115 -v ONOS_REST_PORT:30120 -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace} -v container_log_dir:${logsDir} -v logging:${testLogging}" |
| export KVSTOREPREFIX=voltha/voltha_voltha |
| |
| make -C "$WORKSPACE/voltha-system-tests" ${testTarget} |
| """ |
| |
| getPodsInfo("${logsDir}") |
| |
| sh """ |
| echo -e '\n** Gather robot Framework logs: ENTER' |
| # set +e |
| # collect logs collected in the Robot Framework StartLogging keyword |
| cd ${logsDir} |
| gzip *-combined.log |
| rm -f *-combined.log |
| |
| echo -e '** Gather robot Framework logs: LEAVE\n' |
| """ |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| sh """ |
| echo -e '** Monitor pod-mem-consumption: ENTER' |
| if [ ${withMonitoring} = true ] ; then |
| cat <<EOM |
| |
| ** ----------------------------------------------------------------------- |
| ** Monitoring pod-memory-consumption using mem_consumption.py |
| ** ----------------------------------------------------------------------- |
| EOM |
| cd "$WORKSPACE/voltha-system-tests" |
| |
| echo '** Installing python virtualenv' |
| make venv-activate-patched |
| |
| set +u && source .venv/bin/activate && set -u |
| # Collect memory consumption of voltha pods once all the tests are complete |
| python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption-${workflow} -a 0.0.0.0:31301 -n ${volthaNamespace} |
| fi |
| echo -e '** Monitor pod-mem-consumption: LEAVE\n' |
| """ |
| } // stage |
| |
| return |
| } // execute_test() |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| def collectArtifacts(exitStatus) { |
| script { |
| String iam = getIam('collectArtifacts') |
| println("${iam}: ENTER (exitStatus=${exitStatus})") |
| } |
| |
| echo ''' |
| |
| ** ----------------------------------------------------------------------- |
| ** collectArtifacts |
| ** ----------------------------------------------------------------------- |
| ''' |
| |
| getPodsInfo("$WORKSPACE/${exitStatus}") |
| |
| sh """ |
| kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/${exitStatus}/voltha.log |
| """ |
| |
| archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.txt,**/*.html,**/voltha-pods-mem-consumption-att/*,**/voltha-pods-mem-consumption-dt/*,**/voltha-pods-mem-consumption-tt/*' |
| |
| script { |
| println("${iam}: ENTER") |
| pgrep_proc('kail-startup') |
| pkill_proc('kail') |
| println("${iam}: LEAVE") |
| } |
| |
| println("${iam}: ENTER RobotPublisher") |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: '**/*/log*.html', |
| otherFiles: '', |
| outputFileName: '**/*/output*.xml', |
| outputPath: '.', |
| passThreshold: 100, |
| reportFileName: '**/*/report*.html', |
| unstableThreshold: 0, |
| onlyCritical: true]); |
| println("${iam}: LEAVE RobotPublisher") |
| |
| println("${iam}: LEAVE (exitStatus=${exitStatus})") |
| return |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: main |
| // ----------------------------------------------------------------------- |
| pipeline { |
| |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: "${timeout}", unit: 'MINUTES') |
| } |
| environment { |
| KUBECONFIG = "$HOME/.kube/kind-${clusterName}" |
| VOLTCONFIG = "$HOME/.volt/config" |
| PATH = "$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" |
| DIAGS_PROFILE = 'VOLTHA_PROFILE' |
| SSHPASS = 'karaf' |
| } |
| |
| stages { |
| stage('Download Code') { |
| steps { |
| getVolthaCode([ |
| branch: "${branch}", |
| gerritProject: "${gerritProject}", |
| gerritRefspec: "${gerritRefspec}", |
| volthaSystemTestsChange: "${volthaSystemTestsChange}", |
| volthaHelmChartsChange: "${volthaHelmChartsChange}", |
| ]) |
| } |
| } |
| |
| stage('Build patch v1.1') |
| { |
| // build the patch only if gerritProject is specified |
| when |
| { |
| expression |
| { |
| return !gerritProject.isEmpty() |
| } |
| } |
| |
| steps |
| { |
| // NOTE that the correct patch has already been checked out |
| // during the getVolthaCode step |
| buildVolthaComponent("${gerritProject}") |
| } |
| } |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| stage('Install Kail') |
| { |
| steps |
| { |
| script |
| { |
| String cmd = [ |
| 'make', |
| '--no-print-directory', |
| '-C', "$WORKSPACE/voltha-system-tests", |
| "KAIL_PATH=\"$WORKSPACE/bin\"", |
| 'kail', |
| ].join(' ') |
| |
| println(" ** Running: ${cmd}") |
| sh("${cmd}") |
| } // script |
| } // steps |
| } // stage |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| stage('Install Tools') { |
| steps { |
| script { |
| String branchName = branchName() |
| String iam = getIam('Install Tools') |
| |
| println("${iam}: ENTER (branch=$branch)") |
| installKind(branch) // needed early by stage(Cleanup) |
| println("${iam}: LEAVE (branch=$branch)") |
| } // script |
| } // steps |
| } // stage |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| stage('Create K8s Cluster') { |
| steps { |
| script { |
| def clusterExists = sh( |
| returnStdout: true, |
| script: """kind get clusters | grep "${clusterName}" | wc -l""") |
| |
| if (clusterExists.trim() == '0') { |
| createKubernetesCluster([nodes: 3, name: clusterName]) |
| } |
| } // script |
| } // steps |
| } // stage('Create K8s Cluster') |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| stage('Replace voltctl') { |
| // if the project is voltctl, override the downloaded one with the built one |
| when { |
| expression { return gerritProject == 'voltctl' } |
| } |
| |
| // Hmmmm(?) where did the voltctl download happen ? |
| // Likely Makefile but would be helpful to document here. |
| steps { |
| script { |
| String iam = getIam('Replace voltctl') |
| |
| println("${iam} Running: installVoltctl($branch)") |
| println("${iam}: ENTER") |
| installVoltctl("$branch") |
| println("${iam}: LEAVE") |
| } // script |
| } // steps |
| } // stage |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| stage('Load image in kind nodes') |
| { |
| when { |
| expression { return !gerritProject.isEmpty() } |
| } |
| steps { |
| loadToKind() |
| } // steps |
| } // stage |
| |
| // ----------------------------------------------------------------------- |
| // [TODO] verify testing output |
| // ----------------------------------------------------------------------- |
| stage('Parse and execute tests') |
| { |
| steps { |
| script { |
| // Announce ourselves for log usability |
| String iam = getIam('execute_test') |
| println("${iam}: ENTER") |
| |
| def tests = readYaml text: testTargets |
| println("** [DEBUG]: tests=$tests") |
| |
| // Display expected tests for times when output goes dark |
| ArrayList buffer = [] as String |
| tests.eachWithIndex { test, idx -> |
| String target = test['target'] |
| println(" ** Build test index [$idx]: target=$target") |
| buffer.add(" test[${idx}]: ${target}\n") |
| println("** buffer contains: $buffer") |
| } |
| |
| println("** Testing index: tests-to-run") |
| println(buffer.join('')) |
| |
| println(''' |
| ** ----------------------------------------------------------------------- |
| ** NOTE: For odd/silent job failures verify a few details |
| ** - All tests mentioned in the tests-to-run index were logged. |
| ** - Test suites display ENTER/LEAVE mesasge pairs. |
| ** - Processing terminated prematurely when LEAVE strings are missing. |
| ** ----------------------------------------------------------------------- |
| ''') |
| |
| tests.eachWithIndex { test, idx -> |
| println "** readYaml test suite[$idx]) test=[${test}]" |
| |
| String target = test['target'] |
| String workflow = test['workflow'] |
| String flags = test['flags'] |
| Boolean teardown = test['teardown'].toBoolean() |
| Boolean logging = test['logging'].toBoolean() |
| String testLogging = (logging) ? 'True' : 'False' |
| |
| print(""" |
| ** ----------------------------------------------------------------------- |
| ** Executing test ${target} on workflow ${workflow} with logging ${testLogging} and extra flags ${flags} |
| ** ----------------------------------------------------------------------- |
| """) |
| |
| try { |
| println "Executing test ${target}: ENTER" |
| execute_test(target, workflow, testLogging, teardown, flags) |
| } |
| catch (Exception err) { |
| println("** ${iam}: EXCEPTION ${err}") |
| } |
| finally { |
| println "Executing test ${target}: LEAVE" |
| } |
| |
| } // for |
| |
| // Premature exit if this message is not logged |
| println("${iam}: LEAVE (testing ran to completion)") |
| } // script |
| } // steps |
| } // stage |
| } // stages |
| |
| post |
| { |
| aborted { collectArtifacts('aborted') } |
| failure { collectArtifacts('failed') } |
| always { collectArtifacts('always') } |
| } |
| } // pipeline |
| |
| // EOF |