| // Copyright 2017-2022 Open Networking Foundation (ONF) and the ONF Contributors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // used to deploy VOLTHA and configure ONOS physical PODs |
| // NOTE we are importing the library even if it's global so that it's |
| // easier to change the keywords during a replay |
| |
| library identifier: 'cord-jenkins-libraries@master', |
| retriever: modernSCM([ |
| $class: 'GitSCMSource', |
| remote: 'https://gerrit.opencord.org/ci-management.git' |
| ]) |
| def infraNamespace = "infra" |
| def volthaNamespace = "voltha" |
| def clusterName = "kind-ci" |
| pipeline { |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: 120, unit: 'MINUTES') |
| } |
| environment { |
| PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" |
| KUBECONFIG="$HOME/.kube/kind-${clusterName}" |
| VOLTCONFIG="$HOME/.volt/config" |
| LOG_FOLDER="$WORKSPACE/${workflow}/" |
| APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader" |
| |
| } |
| stages{ |
| stage('Download Code') { |
| steps { |
| getVolthaCode([ |
| branch: "${branch}", |
| gerritProject: "${gerritProject}", |
| gerritRefspec: "${gerritRefspec}", |
| volthaSystemTestsChange: "${volthaSystemTestsChange}", |
| volthaHelmChartsChange: "${volthaHelmChartsChange}", |
| ]) |
| } |
| } |
| stage ("Parse deployment configuration file") { |
| steps { |
| sh returnStdout: true, script: "rm -rf ${configBaseDir}" |
| sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}" |
| script { |
| |
| if (params.workflow.toUpperCase() == "TT") { |
| error("The Tucson POD does not support TT workflow at the moment") |
| } |
| |
| if ( params.workflow.toUpperCase() == "DT" ) { |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml" |
| } |
| else if ( params.workflow.toUpperCase() == "TT" ) { |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml" |
| } |
| else { |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml" |
| } |
| } |
| } |
| } |
| stage('Clean up') { |
| steps { |
| timeout(15) { |
| script { |
| helmTeardown(["default", infraNamespace, volthaNamespace]) |
| } |
| timeout(1) { |
| sh returnStdout: false, script: ''' |
| # remove orphaned port-forward from different namespaces |
| ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true |
| ''' |
| } |
| } |
| } |
| } |
| stage('Build patch') { |
| steps { |
| // NOTE that the correct patch has already been checked out |
| // during the getVolthaCode step |
| buildVolthaComponent("${gerritProject}") |
| } |
| } |
| stage('Create K8s Cluster') { |
| steps { |
| script { |
| def clusterExists = sh returnStdout: true, script: """ |
| kind get clusters | grep ${clusterName} | wc -l |
| """ |
| if (clusterExists.trim() == "0") { |
| createKubernetesCluster([nodes: 3, name: clusterName]) |
| } |
| } |
| } |
| } |
| stage('Load image in kind nodes') { |
| steps { |
| loadToKind() |
| } |
| } |
| stage('Install Voltha') { |
| steps { |
| timeout(20) { |
| script { |
| imageFlags = getVolthaImageFlags(gerritProject) |
| // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts |
| def localCharts = false |
| if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts") { |
| localCharts = true |
| } |
| def flags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml ${imageFlags} " |
| // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values) |
| flags = flags + "--set onos-classic.onosSshPort=30115 " + |
| "--set onos-classic.onosApiPort=30120 " + |
| "--set onos-classic.onosOfPort=31653 " + |
| "--set onos-classic.individualOpenFlowNodePorts=true " + extraHelmFlags |
| volthaDeploy([ |
| workflow: workFlow.toLowerCase(), |
| extraHelmFlags: flags, |
| localCharts: localCharts, |
| kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf", |
| onosReplica: 3, |
| atomixReplica: 3, |
| kafkaReplica: 3, |
| etcdReplica: 3, |
| ]) |
| } |
| // start logging |
| sh """ |
| rm -rf $WORKSPACE/${workFlow}/ |
| mkdir -p $WORKSPACE/${workFlow} |
| _TAG=kail-${workFlow} kail -n infra -n voltha > $WORKSPACE/${workFlow}/onos-voltha-combined.log & |
| """ |
| sh returnStdout: false, script: ''' |
| # start logging with kail |
| |
| mkdir -p $LOG_FOLDER |
| |
| list=($APPS_TO_LOG) |
| for app in "${list[@]}" |
| do |
| echo "Starting logs for: ${app}" |
| _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log& |
| done |
| ''' |
| sh """ |
| JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"& |
| JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"& |
| JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"& |
| ps aux | grep port-forward |
| """ |
| getPodsInfo("$WORKSPACE") |
| } |
| } |
| } |
| stage('Deploy Kafka Dump Chart') { |
| steps { |
| script { |
| sh returnStdout: false, script: """ |
| helm repo add cord https://charts.opencord.org |
| helm repo update |
| if helm version -c --short|grep v2 -q; then |
| helm install -n voltha-kafka-dump cord/voltha-kafka-dump |
| else |
| helm install voltha-kafka-dump cord/voltha-kafka-dump |
| fi |
| """ |
| } |
| } |
| } |
| stage('Push Tech-Profile') { |
| when { |
| expression { params.profile != "Default" } |
| } |
| steps { |
| sh returnStdout: false, script: """ |
| etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}') |
| kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json |
| kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64' |
| """ |
| } |
| } |
| |
| stage('Push Sadis-config') { |
| steps { |
| sh returnStdout: false, script: """ |
| ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115 |
| ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts |
| sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay" |
| sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa" |
| sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt" |
| #TRACE in the pipeliner is too chatty, moving to DEBUG |
| sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.opencord.olt.driver" |
| sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager" |
| sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager" |
| |
| if [[ "${workFlow.toUpperCase()}" == "DT" ]]; then |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json |
| elif [[ "${workFlow.toUpperCase()}" == "TT" ]]; then |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json |
| else |
| # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json |
| fi |
| """ |
| } |
| } |
| stage('Reinstall OLT software') { |
| when { |
| expression { params.reinstallOlt } |
| } |
| steps { |
| script { |
| deployment_config.olts.each { olt -> |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'" |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'" |
| return olt_sw_present.toInteger() == 0 |
| } |
| if ( params.branch == 'voltha-2.3' ) { |
| oltDebVersion = oltDebVersionVoltha23 |
| } else { |
| oltDebVersion = oltDebVersionMaster |
| } |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'" |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'" |
| return olt_sw_present.toInteger() == 1 |
| } |
| if ( olt.fortygig ) { |
| // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded |
| sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'" |
| } |
| } |
| } |
| } |
| } |
| |
| stage('Restart OLT processes') { |
| steps { |
| script { |
| deployment_config.olts.each { olt -> |
| sh returnStdout: false, script: """ |
| ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts |
| sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot' |
| sleep 120 |
| """ |
| waitUntil { |
| onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'" |
| return onu_discovered.toInteger() > 0 |
| } |
| } |
| } |
| } |
| } |
| stage('Run E2E Tests') { |
| steps { |
| script { |
| // different workflows need different make targets and different robot files |
| if ( params.workflow.toUpperCase() == "DT" ) { |
| robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml" |
| robotFile = "Voltha_DT_PODTests.robot" |
| makeTarget = "voltha-dt-test" |
| robotFunctionalKeyword = "-i functionalDt" |
| robotDataplaneKeyword = "-i dataplaneDt" |
| } |
| else if ( params.workflow.toUpperCase() == "TT" ) { |
| // TODO the TT tests have diffent tags, address once/if TT is support on the Tucson POD |
| robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml" |
| robotFile = "Voltha_TT_PODTests.robot" |
| makeTarget = "voltha-tt-test" |
| robotFunctionalKeyword = "-i functionalTt" |
| robotDataplaneKeyword = "-i dataplaneTt" |
| } |
| else { |
| robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml" |
| robotFile = "Voltha_PODTests.robot" |
| makeTarget = "voltha-test" |
| robotFunctionalKeyword = "-i functional" |
| robotDataplaneKeyword = "-i dataplane" |
| } |
| } |
| sh returnStdout: false, script: """ |
| mkdir -p $WORKSPACE/RobotLogs |
| |
| export ROBOT_CONFIG_FILE="$WORKSPACE/${robotConfigFile}" |
| export ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE " |
| export ROBOT_FILE="${robotFile}" |
| |
| # If the Gerrit comment contains a line with "functional tests" then run the full |
| # functional test suite. This covers tests tagged either 'sanity' or 'functional'. |
| # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line |
| REGEX="functional tests" |
| if [[ "${gerritComment}" =~ \$REGEX ]]; then |
| ROBOT_MISC_ARGS+="${robotFunctionalKeyword} " |
| fi |
| # Likewise for dataplane tests |
| REGEX="dataplane tests" |
| if [[ "${gerritComment}" =~ \$REGEX ]]; then |
| ROBOT_MISC_ARGS+="${robotDataplaneKeyword}" |
| fi |
| |
| ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}" |
| make -C $WORKSPACE/voltha-system-tests ${makeTarget} || true |
| """ |
| } |
| } |
| } |
| post { |
| always { |
| // stop logging |
| sh """ |
| P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workFlow}" | grep -v grep | awk '{print \$1}')" |
| if [ -n "\$P_IDS" ]; then |
| echo \$P_IDS |
| for P_ID in \$P_IDS; do |
| kill -9 \$P_ID |
| done |
| fi |
| gzip $WORKSPACE/${workFlow}/onos-voltha-combined.log || true |
| """ |
| sh ''' |
| # stop the kail processes |
| list=($APPS_TO_LOG) |
| for app in "${list[@]}" |
| do |
| echo "Stopping logs for: ${app}" |
| _TAG="kail-$app" |
| P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')" |
| if [ -n "$P_IDS" ]; then |
| echo $P_IDS |
| for P_ID in $P_IDS; do |
| kill -9 $P_ID |
| done |
| fi |
| done |
| ''' |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: 'RobotLogs/log*.html', |
| otherFiles: '', |
| outputFileName: 'RobotLogs/output*.xml', |
| outputPath: '.', |
| passThreshold: 100, |
| reportFileName: 'RobotLogs/report*.html', |
| unstableThreshold: 0, |
| onlyCritical: true]); |
| archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz,**/*.log' |
| } |
| } |
| } |
| |
| // refs/changes/06/24206/5 |