| // Copyright 2017-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // used to deploy VOLTHA and configure ONOS physical PODs |
| |
| // NOTE we are importing the library even if it's global so that it's |
| // easier to change the keywords during a replay |
| library identifier: 'cord-jenkins-libraries@master', |
| retriever: modernSCM([ |
| $class: 'GitSCMSource', |
| remote: 'https://gerrit.opencord.org/ci-management.git' |
| ]) |
| |
| def infraNamespace = "infra" |
| def volthaNamespace = "voltha" |
| |
| pipeline { |
| |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: 35, unit: 'MINUTES') |
| } |
| environment { |
| PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin" |
| KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf" |
| } |
| |
| stages{ |
| stage('Download Code') { |
| steps { |
| getVolthaCode([ |
| branch: "${branch}", |
| volthaSystemTestsChange: "${volthaSystemTestsChange}", |
| volthaHelmChartsChange: "${volthaHelmChartsChange}", |
| ]) |
| } |
| } |
| stage ("Parse deployment configuration file") { |
| steps { |
| sh returnStdout: true, script: "rm -rf ${configBaseDir}" |
| sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}" |
| script { |
| if ( params.workFlow == "DT" ) { |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml" |
| } |
| else if ( params.workFlow == "TT" ) |
| { |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml" |
| } |
| else |
| { |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml" |
| } |
| } |
| } |
| } |
| stage('Clean up') { |
| steps { |
| timeout(15) { |
| script { |
| helmTeardown(["default", infraNamespace, volthaNamespace]) |
| } |
| timeout(1) { |
| sh returnStdout: false, script: ''' |
| # remove orphaned port-forward from different namespaces |
| ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true |
| ''' |
| } |
| } |
| } |
| } |
| stage('Install Voltha') { |
| steps { |
| timeout(20) { |
| script { |
| // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts |
| def localCharts = false |
| if (volthaHelmChartsChange != "" || branch != "master") { |
| localCharts = true |
| } |
| |
| // should the config file be suffixed with the workflow? see "deployment_config" |
| def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} " |
| |
| if (workFlow.toLowerCase() == "dt") { |
| localHelmFlags += " --set radius.enabled=false " |
| } |
| if (workFlow.toLowerCase() == "tt") { |
| localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true " |
| if (enableMultiUni.toBoolean()) { |
| localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} " |
| } |
| } |
| |
| // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values) |
| // and to connect the ofagent to all instances of ONOS |
| localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " + |
| "--set onos-classic.onosApiPort=30120 " + |
| "--set onos-classic.onosOfPort=31653 " + |
| "--set onos-classic.individualOpenFlowNodePorts=true " + |
| "--set voltha.onos_classic.replicas=${params.NumOfOnos}" |
| |
| if (bbsimReplicas.toInteger() != 0) { |
| localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} " |
| } |
| |
| // adding user specified helm flags at the end so they'll have priority over everything else |
| localHelmFlags = localHelmFlags + " ${extraHelmFlags}" |
| |
| volthaDeploy([ |
| workflow: workFlow.toLowerCase(), |
| extraHelmFlags: localHelmFlags, |
| localCharts: localCharts, |
| kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf", |
| onosReplica: params.NumOfOnos, |
| atomixReplica: params.NumOfAtomix, |
| kafkaReplica: params.NumOfKafka, |
| etcdReplica: params.NumOfEtcd, |
| bbsimReplica: bbsimReplicas.toInteger(), |
| ]) |
| } |
| sh """ |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"& |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"& |
| JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"& |
| ps aux | grep port-forward |
| """ |
| getPodsInfo("$WORKSPACE") |
| } |
| } |
| } |
| stage('Push Tech-Profile') { |
| steps { |
| script { |
| if ( params.configurePod && params.profile != "Default" ) { |
| for(int i=0; i < deployment_config.olts.size(); i++) { |
| def tech_prof_directory = "XGS-PON" |
| // If no debian package is specified we default to GPON for the ADTRAN OLT. |
| if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){ |
| tech_prof_directory = "GPON" |
| } |
| timeout(1) { |
| sh returnStatus: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}') |
| if [[ "${workFlow}" == "TT" ]]; then |
| if [[ "${params.enableMultiUni}" == "true" ]]; then |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-HSIA.json \$etcd_container:/tmp/hsia.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64' |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-VoIP.json \$etcd_container:/tmp/voip.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65' |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66' |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67' |
| else |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64' |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65' |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66' |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67' |
| fi |
| else |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64' |
| fi |
| """ |
| } |
| timeout(1) { |
| sh returnStatus: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}') |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64' |
| """ |
| } |
| } |
| } |
| } |
| } |
| } |
| stage('Push MIB templates') { |
| steps { |
| sh """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}') |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414' |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414' |
| kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304' |
| kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304' |
| """ |
| } |
| } |
| stage('Push Sadis-config') { |
| steps { |
| timeout(1) { |
| sh returnStatus: true, script: """ |
| if [[ "${workFlow}" == "DT" ]]; then |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json |
| elif [[ "${workFlow}" == "TT" ]]; then |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json |
| else |
| # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json |
| fi |
| """ |
| } |
| } |
| } |
| stage('Switch Configurations in ONOS') { |
| steps { |
| script { |
| if ( deployment_config.fabric_switches.size() > 0 ) { |
| timeout(1) { |
| def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json" |
| if (params.inBandManagement){ |
| netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json" |
| } |
| sh """ |
| curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg} |
| curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active |
| """ |
| } |
| timeout(1) { |
| waitUntil { |
| sr_active_out = sh returnStatus: true, script: """ |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay" |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa" |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt" |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager" |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager" |
| curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false" |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false" |
| sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false" |
| """ |
| return sr_active_out == 0 |
| } |
| } |
| timeout(7) { |
| for(int i=0; i < deployment_config.hosts.src.size(); i++) { |
| for(int j=0; j < deployment_config.olts.size(); j++) { |
| def aggPort = -1 |
| if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){ |
| aggPort = deployment_config.olts[j].aggPort |
| if(aggPort == -1){ |
| throw new Exception("Upstream port for the olt is not configured, field aggPort is empty") |
| } |
| sh """ |
| sleep 30 # NOTE why are we sleeping? |
| curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect' |
| """ |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| stage('Reinstall OLT software') { |
| steps { |
| script { |
| if ( params.reinstallOlt ) { |
| for(int i=0; i < deployment_config.olts.size(); i++) { |
| // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation? |
| sh returnStdout: true, script: """ |
| if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then |
| ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}" |
| fi |
| if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then |
| ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}" |
| fi |
| if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then |
| ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}" |
| fi |
| if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then |
| ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}" |
| fi |
| sleep 10 |
| """ |
| timeout(5) { |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: """ |
| if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l' |
| else |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l' |
| fi |
| if (${deployment_config.olts[i].fortygig}); then |
| if [[ "${params.inBandManagement}" == "true" ]]; then |
| ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/' |
| fi |
| fi |
| """ |
| return olt_sw_present.toInteger() > 0 |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| stage('Restart OLT processes') { |
| steps { |
| script { |
| for(int i=0; i < deployment_config.olts.size(); i++) { |
| int waitTimerForOltUp = 360 |
| if ( params.inBandManagement ) { |
| waitTimerForOltUp = 540 |
| } |
| timeout(15) { |
| sh returnStdout: true, script: """ |
| ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true |
| sleep ${waitTimerForOltUp} |
| """ |
| } |
| timeout(15) { |
| waitUntil { |
| devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'" |
| return devprocess.toInteger() > 0 |
| } |
| } |
| timeout(15) { |
| waitUntil { |
| openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'" |
| return openoltprocess.toInteger() > 0 |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| post { |
| aborted { |
| getPodsInfo("$WORKSPACE/failed") |
| sh """ |
| kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true |
| """ |
| archiveArtifacts artifacts: '**/*.log,**/*.txt' |
| } |
| failure { |
| getPodsInfo("$WORKSPACE/failed") |
| sh """ |
| kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true |
| """ |
| archiveArtifacts artifacts: '**/*.log,**/*.txt' |
| } |
| always { |
| archiveArtifacts artifacts: '*.txt' |
| } |
| } |
| } |