| // Copyright 2019-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // deploy VOLTHA using kind-voltha and performs a scale test |
| |
| pipeline { |
| |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: 60, unit: 'MINUTES') |
| } |
| environment { |
| JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done |
| KUBECONFIG="$HOME/.kube/config" |
| VOLTCONFIG="$HOME/.volt/config" |
| SSHPASS="karaf" |
| PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" |
| SCHEDULE_ON_CONTROL_NODES="yes" |
| FANCY=0 |
| WITH_SIM_ADAPTERS="no" |
| WITH_RADIUS="yes" |
| WITH_BBSIM="yes" |
| LEGACY_BBSIM_INDEX="no" |
| DEPLOY_K8S="no" |
| CONFIG_SADIS="external" |
| WITH_KAFKA="kafka.default.svc.cluster.local" |
| WITH_ETCD="etcd.default.svc.cluster.local" |
| VOLTHA_ETCD_PORT=9999 |
| |
| // install everything in the default namespace |
| VOLTHA_NS="default" |
| ADAPTER_NS="default" |
| INFRA_NS="default" |
| BBSIM_NS="default" |
| |
| // configurable options |
| WITH_EAPOL="${withEapol}" |
| WITH_DHCP="${withDhcp}" |
| WITH_IGMP="${withIgmp}" |
| VOLTHA_LOG_LEVEL="${logLevel}" |
| NUM_OF_BBSIM="${olts}" |
| NUM_OF_OPENONU="${openonuAdapterReplicas}" |
| NUM_OF_ONOS="${onosReplicas}" |
| NUM_OF_ATOMIX="${atomixReplicas}" |
| WITH_PPROF="${withProfiling}" |
| EXTRA_HELM_FLAGS="${extraHelmFlags} " // note that the trailing space is required to separate the parameters from appends done later |
| VOLTHA_CHART="${volthaChart}" |
| VOLTHA_BBSIM_CHART="${bbsimChart}" |
| VOLTHA_ADAPTER_OPEN_OLT_CHART="${openoltAdapterChart}" |
| VOLTHA_ADAPTER_OPEN_ONU_CHART="${openonuAdapterChart}" |
| ONOS_CLASSIC_CHART="${onosChart}" |
| |
| APPS_TO_LOG="etcd kafka onos-onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius" |
| LOG_FOLDER="$WORKSPACE/logs" |
| } |
| |
| stages { |
| stage ('Cleanup') { |
| steps { |
| timeout(time: 11, unit: 'MINUTES') { |
| sh returnStdout: false, script: """ |
| helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com |
| helm repo add stable https://kubernetes-charts.storage.googleapis.com |
| helm repo add onf https://charts.opencord.org |
| helm repo add cord https://charts.opencord.org |
| helm repo add onos https://charts.onosproject.org |
| helm repo add atomix https://charts.atomix.io |
| helm repo add bbsim-sadis https://ciena.github.io/bbsim-sadis-server/charts |
| helm repo update |
| |
| # removing ETCD port forward |
| P_ID="\$(ps e -ww -A | grep "_TAG=etcd-port-forward" | grep -v grep | awk '{print \$1}')" |
| if [ -n "\$P_ID" ]; then |
| kill -9 \$P_ID |
| fi |
| |
| for hchart in \$(helm list -q | grep -E -v 'docker-registry|kafkacat'); |
| do |
| echo "Purging chart: \${hchart}" |
| helm delete "\${hchart}" |
| done |
| bash /home/cord/voltha-scale/wait_for_pods.sh |
| |
| test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down |
| |
| cd $WORKSPACE |
| rm -rf $WORKSPACE/* |
| """ |
| } |
| } |
| } |
| stage('Clone kind-voltha') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/kind-voltha", |
| refspec: "${kindVolthaChange}" |
| ]], |
| branches: [[ name: "master", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| script { |
| sh(script:""" |
| if [ '${kindVolthaChange}' != '' ] ; then |
| cd $WORKSPACE/kind-voltha; |
| git fetch https://gerrit.opencord.org/kind-voltha ${kindVolthaChange} && git checkout FETCH_HEAD |
| fi |
| """) |
| } |
| } |
| } |
| stage('Clone voltha-system-tests') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/voltha-system-tests", |
| refspec: "${volthaSystemTestsChange}" |
| ]], |
| branches: [[ name: "${release}", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| script { |
| sh(script:""" |
| if [ '${volthaSystemTestsChange}' != '' ] ; then |
| cd $WORKSPACE/voltha-system-tests; |
| git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD |
| fi |
| """) |
| } |
| } |
| } |
| stage('Deploy common infrastructure') { |
| // includes monitoring, kafka, etcd |
| steps { |
| sh ''' |
| helm install kafka incubator/kafka --set replicas=${kafkaReplicas} --set persistence.enabled=false --set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false |
| |
| # the ETCD chart use "auth" for resons different than BBsim, so strip that away |
| ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g' |
| ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} " |
| helm install -f $WORKSPACE/kind-voltha/values.yaml --set replicas=${etcdReplicas} etcd incubator/etcd $ETCD_FLAGS |
| |
| if [ ${withMonitoring} = true ] ; then |
| helm install nem-monitoring cord/nem-monitoring \ |
| -f $HOME/voltha-scale/grafana.yaml \ |
| --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \ |
| --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false |
| fi |
| |
| # TODO download this file from https://github.com/opencord/helm-charts/blob/master/scripts/wait_for_pods.sh |
| bash /home/cord/voltha-scale/wait_for_pods.sh |
| ''' |
| } |
| } |
| stage('Deploy Voltha') { |
| steps { |
| script { |
| sh returnStdout: false, script: """ |
| |
| cd $WORKSPACE/kind-voltha/ |
| |
| export EXTRA_HELM_FLAGS+=' ' |
| |
| # Load the release defaults |
| if [ '${release.trim()}' != 'master' ]; then |
| source $WORKSPACE/kind-voltha/releases/${release} |
| EXTRA_HELM_FLAGS+=" ${extraHelmFlags} " |
| fi |
| |
| # BBSim custom image handling |
| if [ '${bbsimImg.trim()}' != '' ]; then |
| IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}' |
| EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag " |
| fi |
| |
| # VOLTHA and ofAgent custom image handling |
| # NOTE to override the rw-core image in a released version you must set the ofAgent image too |
| if [ '${rwCoreImg.trim()}' != '' ] && [ '${ofAgentImg.trim()}' != '' ]; then |
| IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}' |
| IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}' |
| EXTRA_HELM_FLAGS+="--set images.rw_core.repository=\$rwCoreRepo,images.rw_core.tag=\$rwCoreTag,images.ofagent.repository=\$ofAgentRepo,images.ofagent.tag=\$ofAgentTag " |
| fi |
| |
| # OpenOLT custom image handling |
| if [ '${openoltAdapterImg.trim()}' != '' ]; then |
| IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}' |
| EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=\$openoltAdapterRepo,images.adapter_open_olt.tag=\$openoltAdapterTag " |
| fi |
| |
| # OpenONU custom image handling |
| if [ '${openonuAdapterImg.trim()}' != '' ]; then |
| IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}' |
| EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=\$openonuAdapterRepo,images.adapter_open_onu.tag=\$openonuAdapterTag " |
| fi |
| |
| # ONOS custom image handling |
| if [ '${onosImg.trim()}' != '' ]; then |
| IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}' |
| EXTRA_HELM_FLAGS+="--set images.onos.repository=\$onosRepo,images.onos.tag=\$onosTag " |
| fi |
| |
| # set BBSim parameters |
| EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus} ' |
| |
| # disable the securityContext, this is a development cluster |
| EXTRA_HELM_FLAGS+='--set securityContext.enabled=false ' |
| |
| # No persistent-volume-claims in Atomix |
| EXTRA_HELM_FLAGS+="--set atomix.persistence.enabled=false " |
| |
| echo "Installing with the following extra arguments:" |
| echo $EXTRA_HELM_FLAGS |
| |
| # if it's newer than voltha-2.4 set the correct BBSIM_CFG |
| if [ '${release.trim()}' != 'voltha-2.4' ]; then |
| export BBSIM_CFG="$WORKSPACE/kind-voltha/configs/bbsim-sadis-${workflow}.yaml" |
| fi |
| |
| ./voltha up |
| |
| # Forward the ETCD port onto $VOLTHA_ETCD_PORT |
| _TAG=etcd-port-forward kubectl port-forward --address 0.0.0.0 -n default service/etcd $VOLTHA_ETCD_PORT:2379& |
| """ |
| } |
| sh returnStdout: false, script: ''' |
| # start logging with kail |
| |
| mkdir -p $LOG_FOLDER |
| |
| list=($APPS_TO_LOG) |
| for app in "${list[@]}" |
| do |
| echo "Starting logs for: ${app}" |
| _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log& |
| done |
| ''' |
| // bbsim-sadis server takes a while to cache the subscriber entries |
| // wait for that before starting the tests |
| sleep(120) |
| } |
| } |
| stage('Configuration') { |
| steps { |
| sh ''' |
| #Setting link discovery |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP} |
| |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true |
| |
| kubectl exec onos-onos-classic-0 -- bash /root/onos/apache-karaf-4.2.9/bin/client log:set TRACE org.opencord.aaa |
| kubectl exec onos-onos-classic-1 -- bash /root/onos/apache-karaf-4.2.9/bin/client log:set TRACE org.opencord.aaa |
| kubectl exec onos-onos-classic-2 -- bash /root/onos/apache-karaf-4.2.9/bin/client log:set TRACE org.opencord.aaa |
| |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.onosproject.net.flow.impl.FlowRuleManager |
| |
| #Setting LOG level to ${logLevel} |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set ${logLevel} |
| kubectl exec $(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print $1}') -- bbsimctl log ${logLevel} false |
| |
| # Set Flows/Ports/Meters poll frequency |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval} |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval} |
| |
| if [ ${withFlows} = false ]; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt |
| fi |
| |
| if [ ${withMibTemplate} = true ] ; then |
| rm -f BBSM-12345123451234512345-00000000000001-v1.json |
| wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json |
| cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it $(kubectl get pods -l app=etcd | awk 'NR==2{print $1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001 |
| fi |
| |
| # Start the tcp-dump in ofagent |
| if [ ${withPcap} = true ] ; then |
| export OF_AGENT=$(kubectl get pods -l app=ofagent -o name) |
| kubectl exec $OF_AGENT -- apk update |
| kubectl exec $OF_AGENT -- apk add tcpdump |
| kubectl exec $OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump |
| _TAG=ofagent-tcpdump kubectl exec $OF_AGENT -- tcpdump -nei eth0 -w out.pcap& |
| |
| export BBSIM=$(kubectl get pods -l app=bbsim -o name) |
| _TAG=bbsim-tcpdump kubectl exec $BBSIM -- tcpdump -nei nni -w out.pcap& |
| fi |
| ''' |
| } |
| } |
| stage('Run Test') { |
| steps { |
| sh ''' |
| mkdir -p $WORKSPACE/RobotLogs |
| cd $WORKSPACE/voltha-system-tests |
| make vst_venv |
| ''' |
| sh ''' |
| if [ ${withProfiling} = true ] ; then |
| mkdir -p $LOG_FOLDER/pprof |
| echo $PATH |
| #Creating Python script for ONU Detection |
| cat << EOF > $WORKSPACE/pprof.sh |
| timestamp() { |
| date +"%T" |
| } |
| |
| i=0 |
| while [[ true ]]; do |
| ((i++)) |
| ts=$(timestamp) |
| go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png |
| go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png |
| curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10 |
| go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png |
| |
| go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png |
| go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png |
| curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10 |
| go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png |
| |
| go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png |
| go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png |
| curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10 |
| go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png |
| |
| sleep 10 |
| done |
| EOF |
| |
| _TAG="pprof" |
| _TAG=$_TAG bash $WORKSPACE/pprof.sh & |
| fi |
| ''' |
| timeout(time: 11, unit: 'MINUTES') { |
| sh ''' |
| ROBOT_PARAMS="-v olt:${olts} \ |
| -v pon:${pons} \ |
| -v onu:${onus} \ |
| -v workflow:${workflow} \ |
| -v withEapol:${withEapol} \ |
| -v withDhcp:${withDhcp} \ |
| -v withIgmp:${withIgmp} \ |
| --noncritical non-critical \ |
| -e teardown " |
| |
| if [ ${withEapol} = false ] ; then |
| ROBOT_PARAMS+="-e authentication " |
| fi |
| |
| if [ ${withDhcp} = false ] ; then |
| ROBOT_PARAMS+="-e dhcp " |
| fi |
| |
| if [ ${provisionSubscribers} = false ] ; then |
| # if we're not considering subscribers then we don't care about authentication and dhcp |
| ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp " |
| fi |
| |
| if [ ${withFlows} = false ] ; then |
| ROBOT_PARAMS+="-i setup -i activation " |
| fi |
| |
| cd $WORKSPACE/voltha-system-tests |
| source ./vst_venv/bin/activate |
| robot -d $WORKSPACE/RobotLogs \ |
| $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot |
| ''' |
| } |
| } |
| } |
| } |
| post { |
| always { |
| // collect result, done in the "post" step so it's executed even in the |
| // event of a timeout in the tests |
| sh ''' |
| |
| # stop the kail processes |
| list=($APPS_TO_LOG) |
| for app in "${list[@]}" |
| do |
| echo "Stopping logs for: ${app}" |
| _TAG="kail-$app" |
| P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')" |
| if [ -n "$P_IDS" ]; then |
| echo $P_IDS |
| for P_ID in $P_IDS; do |
| kill -9 $P_ID |
| done |
| fi |
| done |
| |
| if [ ${withPcap} = true ] ; then |
| # stop ofAgent tcpdump |
| P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')" |
| if [ -n "\$P_ID" ]; then |
| kill -9 \$P_ID |
| fi |
| |
| # stop bbsim tcpdump |
| P_ID="\$(ps e -ww -A | grep "_TAG=bbsim-tcpdump" | grep -v grep | awk '{print \$1}')" |
| if [ -n "\$P_ID" ]; then |
| kill -9 \$P_ID |
| fi |
| |
| # copy the file |
| export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true |
| kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true |
| |
| export BBSIM=$(kubectl get pods -l app=bbsim | awk 'NR==2{print $1}') || true |
| kubectl cp $BBSIM:out.pcap $LOG_FOLDER/bbsim.pcap || true |
| fi |
| |
| cd voltha-system-tests |
| source ./vst_venv/bin/activate |
| python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true |
| cat $WORKSPACE/execution-time.txt |
| ''' |
| sh ''' |
| if [ ${withProfiling} = true ] ; then |
| _TAG="pprof" |
| P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')" |
| if [ -n "$P_IDS" ]; then |
| echo $P_IDS |
| for P_ID in $P_IDS; do |
| kill -9 $P_ID |
| done |
| fi |
| fi |
| ''' |
| plot([ |
| csvFileName: 'scale-test.csv', |
| csvSeries: [ |
| [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''], |
| ], |
| group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true |
| ]) |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: 'RobotLogs/log.html', |
| otherFiles: '', |
| outputFileName: 'RobotLogs/output.xml', |
| outputPath: '.', |
| passThreshold: 100, |
| reportFileName: 'RobotLogs/report.html', |
| unstableThreshold: 0]); |
| // get all the logs from kubernetes PODs |
| sh returnStdout: false, script: ''' |
| |
| # store information on running charts |
| helm ls > $LOG_FOLDER/helm-list.txt || true |
| |
| # store information on the running pods |
| kubectl get pods -o wide > $LOG_FOLDER/pods.txt || true |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true |
| |
| # copy the ONOS logs directly from the container to avoid the color codes |
| printf '%s\n' $(kubectl get pods -l app=onos-onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true |
| |
| # get radius logs out of the container |
| kubectl cp $(kubectl get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER//radius.log || true |
| ''' |
| // dump all the BBSim(s) ONU information |
| sh ''' |
| BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}') |
| IDS=($BBSIM_IDS) |
| |
| for bbsim in "${IDS[@]}" |
| do |
| kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true |
| kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true |
| done |
| ''' |
| // get DHCP server stats |
| sh ''' |
| BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}') |
| IDS=($BBSIM_IDS) |
| |
| for bbsim in "${IDS[@]}" |
| do |
| kubectl exec -t $bbsim -- dhcpd -lf /var/lib/dhcp/dhcpd.leases -play /tmp/dhcplog 2>&1 | tee $LOG_FOLDER/$bbsim-dhcp-replay.txt || true |
| kubectl cp $bbsim:/tmp/dhcplog $LOG_FOLDER/$bbsim-dhcp-logs || true |
| kubectl cp $bbsim:/var/lib/dhcp/dhcpd.leases $LOG_FOLDER/$bbsim-dhcp-leases || true |
| done |
| ''' |
| // get ONOS debug infos |
| sh ''' |
| |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt || true |
| |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt || true |
| |
| if [ ${withFlows} = true ] ; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt || true |
| fi |
| |
| if [ ${provisionSubscribers} = true ]; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt || true |
| fi |
| |
| if [ ${withEapol} = true ] ; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt || true |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt || true |
| fi |
| |
| if [ ${withDhcp} = true ] ; then |
| sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt || true |
| fi |
| ''' |
| // collect etcd metrics |
| sh ''' |
| mkdir -p $WORKSPACE/etcd-metrics |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true |
| curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true |
| ''' |
| // get VOLTHA debug infos |
| script { |
| try { |
| sh ''' |
| voltctl -m 8MB device list -o json > $LOG_FOLDER/device-list.json || true |
| python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true |
| rm $LOG_FOLDER/device-list.json || true |
| voltctl -m 8MB device list > $LOG_FOLDER/voltha-devices-list.txt || true |
| |
| printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I# bash -c "voltctl -m 8MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true |
| printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true |
| |
| printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true |
| printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true |
| ''' |
| } catch(e) { |
| sh ''' |
| echo "Can't get device list from voltclt" |
| ''' |
| } |
| } |
| // get cpu usage by container |
| sh ''' |
| if [ ${withMonitoring} = true ] ; then |
| cd $WORKSPACE/voltha-system-tests |
| source ./vst_venv/bin/activate |
| sleep 60 # we have to wait for prometheus to collect all the information |
| python tests/scale/sizing.py -o $WORKSPACE/plots || true |
| fi |
| ''' |
| archiveArtifacts artifacts: 'kind-voltha/install-minimal.log,execution-time.txt,logs/*,logs/pprof/*,RobotLogs/*,plots/*,etcd-metrics/*' |
| } |
| } |
| } |