blob: 461500bb3e21b27793115d31c16beda37680d314 [file] [log] [blame]
// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// voltha-2.x e2e tests
// uses kind-voltha to deploy voltha-2.X
// uses bbsim to simulate OLT/ONUs
pipeline {
/* no label, executor is determined by JJB */
agent {
label "${params.buildNode}"
}
options {
timeout(time: 90, unit: 'MINUTES')
}
environment {
KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
VOLTCONFIG="$HOME/.volt/config-minimal"
PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
NAME="minimal"
FANCY=0
WITH_SIM_ADAPTERS="no"
WITH_RADIUS="yes"
WITH_BBSIM="yes"
DEPLOY_K8S="yes"
VOLTHA_LOG_LEVEL="DEBUG"
CONFIG_SADIS="external"
BBSIM_CFG="configs/bbsim-sadis-att.yaml"
ROBOT_MISC_ARGS="-e PowerSwitch ${params.extraRobotArgs}"
KARAF_HOME="${params.karafHome}"
DIAGS_PROFILE="VOLTHA_PROFILE"
NUM_OF_BBSIM="${olts}"
}
stages {
stage('Clone kind-voltha') {
steps {
checkout([
$class: 'GitSCM',
userRemoteConfigs: [[
url: "https://gerrit.opencord.org/kind-voltha",
// refspec: "${kindVolthaChange}"
]],
branches: [[ name: "master", ]],
extensions: [
[$class: 'WipeWorkspace'],
[$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
[$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
],
])
}
}
stage('Cleanup') {
steps {
sh """
cd $WORKSPACE/kind-voltha/
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down || ./voltha down
"""
}
}
stage('Clone voltha-system-tests') {
steps {
checkout([
$class: 'GitSCM',
userRemoteConfigs: [[
url: "https://gerrit.opencord.org/voltha-system-tests",
// refspec: "${volthaSystemTestsChange}"
]],
branches: [[ name: "${branch}", ]],
extensions: [
[$class: 'WipeWorkspace'],
[$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
[$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
],
])
}
}
stage('Deploy Voltha') {
steps {
sh """
export EXTRA_HELM_FLAGS=""
if [ "${branch}" != "master" ]; then
echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
source "$WORKSPACE/kind-voltha/releases/${branch}"
else
echo "on master, using default settings for kind-voltha"
fi
EXTRA_HELM_FLAGS+="--set log_agent.enabled=False ${params.extraHelmFlags} --set defaults.image_registry=mirror.registry.opennetworking.org/ "
cd $WORKSPACE/kind-voltha/
./voltha up
"""
}
}
stage('Run E2E Tests 1t1gem') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/1t1gem"
}
steps {
sh '''
# start logging
mkdir -p $WORKSPACE/1t1gem
_TAG=kail-1t1gem kail -n voltha -n default > $WORKSPACE/1t1gem/onos-voltha-combined.log &
mkdir -p $ROBOT_LOGS_DIR/1t1gem
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR"
export TARGET_DEFAULT=openonu-go-adapter-test
export NAME=voltha_voltha
make -C $WORKSPACE/voltha-system-tests \$TARGET_DEFAULT || true
# stop logging
P_IDS="$(ps e -ww -A | grep "_TAG=kail-1t1gem" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
# get pods information
kubectl get pods -o wide --all-namespaces > $WORKSPACE/1t1gem/pods.txt || true
'''
}
}
stage('Run E2E Tests 1t4gem') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/1t4gem"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
#source $NAME-env.sh
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set log_agent.enabled=False ${extraHelmFlags} "
# start logging
mkdir -p $WORKSPACE/1t4gem
_TAG=kail-1t4gem kail -n voltha -n default > $WORKSPACE/1t4gem/onos-voltha-combined.log &
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR/1t4gem
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR"
export TARGET_DEFAULT=1t4gem-openonu-go-adapter-test
export NAME=voltha_voltha
make -C $WORKSPACE/voltha-system-tests \$TARGET_DEFAULT || true
# stop logging
P_IDS="$(ps e -ww -A | grep "_TAG=kail-1t4gem" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
# get pods information
kubectl get pods -o wide --all-namespaces > $WORKSPACE/1t4gem/pods.txt || true
'''
}
}
stage('Run E2E Tests 1t8gem') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/1t8gem"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
#source $NAME-env.sh
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set log_agent.enabled=False ${extraHelmFlags} "
# start logging
mkdir -p $WORKSPACE/1t8gem
_TAG=kail-1t8gem kail -n voltha -n default > $WORKSPACE/1t8gem/onos-voltha-combined.log &
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR/1t8gem
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR"
export TARGET_1T8GEM=1t8gem-openonu-go-adapter-test
export NAME=voltha_voltha
make -C $WORKSPACE/voltha-system-tests \$TARGET_1T8GEM || true
# stop logging
P_IDS="$(ps e -ww -A | grep "_TAG=kail-1t8gem" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
# get pods information
kubectl get pods -o wide --all-namespaces > $WORKSPACE/1t8gem/pods.txt || true
'''
}
}
stage('Run MIB Upload Tests') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/openonu-go-MIB"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
#source $NAME-env.sh
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set log_agent.enabled=False ${extraHelmFlags} "
export EXTRA_HELM_FLAGS+="--set pon=2,onu=2,controlledActivation=only-onu "
# start logging
mkdir -p $WORKSPACE/mib
_TAG=kail-mib kail -n voltha -n default > $WORKSPACE/mib/onos-voltha-combined.log &
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR"
export TARGET_DEFAULT=mib-upload-templating-openonu-go-adapter-test
make -C $WORKSPACE/voltha-system-tests \$TARGET_DEFAULT || true
# stop logging
P_IDS="$(ps e -ww -A | grep "_TAG=kail-mib" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
# get pods information
kubectl get pods -o wide --all-namespaces > $WORKSPACE/mib/pods.txt || true
'''
}
}
stage('Reconcile DT workflow') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ReconcileDT"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
#source $NAME-env.sh
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set log_agent.enabled=False ${extraHelmFlags} "
# Workflow-specific flags
export WITH_RADIUS=no
export WITH_EAPOL=no
export WITH_DHCP=no
export WITH_IGMP=no
export CONFIG_SADIS="external"
export BBSIM_CFG="configs/bbsim-sadis-dt.yaml"
# start logging
mkdir -p $WORKSPACE/dt
_TAG=kail-reconcile-dt kail -n voltha -n default > $WORKSPACE/reconciledt/onos-voltha-combined.log &
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR -e PowerSwitch"
export TARGET=reconcile-openonu-go-adapter-test-dt
make -C $WORKSPACE/voltha-system-tests \$TARGET || true
# stop logging
P_IDS="$(ps e -ww -A | grep "_TAG=kail-reconcile-dt" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
# get pods information
kubectl get pods -o wide --all-namespaces > $WORKSPACE/reconciledt/pods.txt || true
'''
}
}
stage('Reconcile ATT workflow') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ReconcileATT"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set log_agent.enabled=False ${extraHelmFlags} "
# Workflow-specific flags
export WITH_RADIUS=yes
export WITH_EAPOL=yes
export WITH_BBSIM=yes
export DEPLOY_K8S=yes
export CONFIG_SADIS="external"
export BBSIM_CFG="configs/bbsim-sadis-att.yaml"
if [ "${gerritProject}" = "voltctl" ]; then
export VOLTCTL_VERSION=$(cat $WORKSPACE/voltctl/VERSION)
cp $WORKSPACE/voltctl/voltctl $WORKSPACE/kind-voltha/bin/voltctl
md5sum $WORKSPACE/kind-voltha/bin/voltctl
fi
# start logging
mkdir -p $WORKSPACE/att
_TAG=kail-reconcile-att kail -n voltha -n default > $WORKSPACE/reconcileatt/onos-voltha-combined.log &
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR -e PowerSwitch"
export TARGET=reconcile-openonu-go-adapter-test
make -C $WORKSPACE/voltha-system-tests \$TARGET || true
# stop logging
P_IDS="$(ps e -ww -A | grep "_TAG=kail-reconcile-att" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
# get pods information
kubectl get pods -o wide --all-namespaces > $WORKSPACE/reconcileatt/pods.txt || true
'''
}
}
stage('Reconcile TT workflow') {
environment {
ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ReconcileTT"
}
steps {
sh '''
cd $WORKSPACE/kind-voltha/
WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down
export EXTRA_HELM_FLAGS+="--set log_agent.enabled=False ${extraHelmFlags} "
# Workflow-specific flags
export WITH_RADIUS=no
export WITH_EAPOL=no
export WITH_DHCP=yes
export WITH_IGMP=yes
export CONFIG_SADIS="external"
export BBSIM_CFG="configs/bbsim-sadis-tt.yaml"
# start logging
mkdir -p $WORKSPACE/tt
_TAG=kail-reconcile-tt kail -n voltha -n default > $WORKSPACE/reconcilett/onos-voltha-combined.log &
DEPLOY_K8S=n ./voltha up
mkdir -p $ROBOT_LOGS_DIR
export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR -e PowerSwitch"
export TARGET=reconcile-openonu-go-adapter-test-tt
make -C $WORKSPACE/voltha-system-tests \$TARGET || true
# stop logging
P_IDS="$(ps e -ww -A | grep "_TAG=kail-reconcile-tt" | grep -v grep | awk '{print $1}')"
if [ -n "$P_IDS" ]; then
echo $P_IDS
for P_ID in $P_IDS; do
kill -9 $P_ID
done
fi
# get pods information
kubectl get pods -o wide --all-namespaces > $WORKSPACE/reconcilett/pods.txt || true
'''
}
}
}
post {
always {
sh '''
set +e
# get pods information
kubectl get pods -o wide
kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}"
helm ls
sync
pkill kail || true
md5sum $WORKSPACE/kind-voltha/bin/voltctl
## Pull out errors from log files
extract_errors_go() {
echo
echo "Error summary for $1:"
grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
echo
}
extract_errors_python() {
echo
echo "Error summary for $1:"
grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
echo
}
extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log || true
extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log || true
extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log || true
extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log || true
gzip $WORKSPACE/onos-voltha-combined.log || true
'''
step([$class: 'RobotPublisher',
disableArchiveOutput: false,
logFileName: 'RobotLogs/*/log*.html',
otherFiles: '',
outputFileName: 'RobotLogs/*/output*.xml',
outputPath: '.',
passThreshold: 100,
reportFileName: 'RobotLogs/*/report*.html',
unstableThreshold: 0]);
archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.txt'
}
}
}