Merge "Frequently discarding old build for jobs that take up a lot of space"
diff --git a/jjb/cord-test/voltha.yaml b/jjb/cord-test/voltha.yaml
index 9d6f665..1434069 100644
--- a/jjb/cord-test/voltha.yaml
+++ b/jjb/cord-test/voltha.yaml
@@ -426,6 +426,7 @@
Jenkinsfile: 'Jenkinsfile-voltha-build'
configurePod: true
profile: '1T8GEM'
+ in-band-management: true
time: '10'
@@ -439,6 +440,7 @@
branch: 'master'
test-repo: 'voltha-system-tests'
profile: '1T8GEM'
+ in-band-management: true
power-switch: True
pipeline-script: 'voltha-dt-physical-functional-tests-openonu-go.groovy'
@@ -626,6 +628,7 @@
test-repo: 'voltha-system-tests'
profile: '1T8GEM'
power-switch: True
+ pipeline-script: 'voltha-dt-physical-functional-tests.groovy'
# Berlin pod with olt/onu - voltha-2.5 Default tech profile and timer based job
- 'build_voltha_pod_release_timer':
@@ -771,7 +774,7 @@
test-repo: 'voltha-system-tests'
profile: '1T8GEM'
power-switch: True
- pipeline-script: 'voltha-dt-physical-functional-tests-openonu-go.groovy'
+ pipeline-script: 'voltha-dt-physical-functional-tests.groovy'
# Berlin pod with gpon olt/onu - voltha-2.4 1T8GEM tech profile and timer based job
- 'build_voltha_pod_release_timer':
diff --git a/jjb/pipeline/voltha-scale-multi-stack.groovy b/jjb/pipeline/voltha-scale-multi-stack.groovy
new file mode 100644
index 0000000..1bc7b5b
--- /dev/null
+++ b/jjb/pipeline/voltha-scale-multi-stack.groovy
@@ -0,0 +1,714 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA using kind-voltha and performs a scale test
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 60, unit: 'MINUTES')
+ }
+ environment {
+ JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+ KUBECONFIG="$HOME/.kube/config"
+ SSHPASS="karaf"
+ PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ SCHEDULE_ON_CONTROL_NODES="yes"
+ FANCY=0
+ WAIT_ON_DOWN="yes"
+ WITH_SIM_ADAPTERS="no"
+ WITH_RADIUS="${withRadius}"
+ WITH_BBSIM="yes"
+ LEGACY_BBSIM_INDEX="no"
+ DEPLOY_K8S="no"
+ CONFIG_SADIS="external"
+ WITH_KAFKA="yes"
+ WITH_ETCD="yes"
+ VOLTHA_ETCD_PORT=9999
+
+ // VOLTHA namespaces are defined at runtime depending on the stack we're installing
+ // VOLTHA_NS="default"
+ // ADAPTER_NS="default"
+ // BBSIM_NS="default"
+ INFRA_NS="infra"
+
+ // configurable options
+ WITH_EAPOL="${withEapol}"
+ WITH_DHCP="${withDhcp}"
+ WITH_IGMP="${withIgmp}"
+ VOLTHA_LOG_LEVEL="${logLevel}"
+ NUM_OF_BBSIM="${olts}"
+ NUM_OF_OPENONU="${openonuAdapterReplicas}"
+ NUM_OF_ONOS="${onosReplicas}"
+ NUM_OF_ATOMIX="${atomixReplicas}"
+ NUM_OF_KAFKA="${kafkaReplicas}"
+ NUM_OF_ETCD="${etcdReplicas}"
+ WITH_PPROF="${withProfiling}"
+ EXTRA_HELM_FLAGS="${extraHelmFlags} " // note that the trailing space is required to separate the parameters from appends done later
+ VOLTHA_CHART="${volthaChart}"
+ VOLTHA_BBSIM_CHART="${bbsimChart}"
+ VOLTHA_ADAPTER_OPEN_OLT_CHART="${openoltAdapterChart}"
+ VOLTHA_ADAPTER_OPEN_ONU_CHART="${openonuAdapterChart}"
+ ONOS_CLASSIC_CHART="${onosChart}"
+ RADIUS_CHART="${radiusChart}"
+
+ APPS_TO_LOG="etcd kafka onos-onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius"
+ LOG_FOLDER="$WORKSPACE/logs"
+
+ GERRIT_PROJECT="${GERRIT_PROJECT}"
+ }
+
+ stages {
+ stage ('Cleanup') {
+ steps {
+ timeout(time: 11, unit: 'MINUTES') {
+ sh returnStdout: false, script: """
+ helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com
+ helm repo add stable https://kubernetes-charts.storage.googleapis.com
+ helm repo add onf https://charts.opencord.org
+ helm repo add cord https://charts.opencord.org
+ helm repo add onos https://charts.onosproject.org
+ helm repo add atomix https://charts.atomix.io
+ helm repo add bbsim-sadis https://ciena.github.io/bbsim-sadis-server/charts
+ helm repo update
+
+ # removing ETCD port forward
+ P_ID="\$(ps e -ww -A | grep "_TAG=etcd-port-forward" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+
+ for hchart in \$(helm list -q | grep -E -v 'docker-registry|kafkacat');
+ do
+ echo "Purging chart: \${hchart}"
+ helm delete "\${hchart}"
+ done
+ bash /home/cord/voltha-scale/wait_for_pods.sh
+
+ test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down
+
+ ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs kill -9
+
+ cd $WORKSPACE
+ rm -rf $WORKSPACE/*
+ """
+ }
+ }
+ }
+ stage('Clone kind-voltha') {
+ steps {
+ checkout([
+ $class: 'GitSCM',
+ userRemoteConfigs: [[
+ url: "https://gerrit.opencord.org/kind-voltha",
+ refspec: "${kindVolthaChange}"
+ ]],
+ branches: [[ name: "master", ]],
+ extensions: [
+ [$class: 'WipeWorkspace'],
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
+ [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+ ],
+ ])
+ script {
+ sh(script:"""
+ if [ '${kindVolthaChange}' != '' ] ; then
+ cd $WORKSPACE/kind-voltha;
+ git fetch https://gerrit.opencord.org/kind-voltha ${kindVolthaChange} && git checkout FETCH_HEAD
+ fi
+ """)
+ }
+ }
+ }
+ stage('Clone voltha-system-tests') {
+ steps {
+ checkout([
+ $class: 'GitSCM',
+ userRemoteConfigs: [[
+ url: "https://gerrit.opencord.org/voltha-system-tests",
+ refspec: "${volthaSystemTestsChange}"
+ ]],
+ branches: [[ name: "${release}", ]],
+ extensions: [
+ [$class: 'WipeWorkspace'],
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+ [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+ ],
+ ])
+ script {
+ sh(script:"""
+ if [ '${volthaSystemTestsChange}' != '' ] ; then
+ cd $WORKSPACE/voltha-system-tests;
+ git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+ fi
+ """)
+ }
+ }
+ }
+ stage('Build patch') {
+ when {
+ expression {
+ return params.GERRIT_PROJECT
+ }
+ }
+ steps {
+ sh """
+ git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
+ cd \$GERRIT_PROJECT
+ git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
+
+ DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
+ DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
+ """
+ }
+ }
+ stage('Deploy common infrastructure') {
+ // includes monitoring, kafka, etcd
+ steps {
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ helm install nem-monitoring cord/nem-monitoring \
+ -f $HOME/voltha-scale/grafana.yaml \
+ --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+ --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+ fi
+
+ # TODO download this file from https://github.com/opencord/helm-charts/blob/master/scripts/wait_for_pods.sh
+ bash /home/cord/voltha-scale/wait_for_pods.sh
+ '''
+ }
+ }
+ stage('Deploy VOLTHA infrastructure') {
+ steps {
+ sh returnStdout: false, script: '''
+ cd $WORKSPACE/kind-voltha/
+
+ # KAFKA config
+ NUM_OF_KAFKA=${kafkaReplicas}
+ EXTRA_HELM_FLAGS+=' --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default '
+
+ # ETCD config
+ EXTRA_HELM_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
+
+ NAME=infra JUST_INFRA=y ./voltha up
+
+ # Forward the ETCD port onto $VOLTHA_ETCD_PORT
+ _TAG=etcd-port-forward kubectl -n \$INFRA_NS port-forward --address 0.0.0.0 -n default service/etcd $VOLTHA_ETCD_PORT:2379&
+ '''
+ }
+ }
+ stage('Deploy Voltha') {
+ steps {
+ deploy_voltha_stacks(params.volthaStacks)
+ }
+ }
+ stage('Start logging') {
+ steps {
+ sh returnStdout: false, script: '''
+ # start logging with kail
+
+ mkdir -p $LOG_FOLDER
+
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Starting logs for: ${app}"
+ _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+ done
+ '''
+ }
+ }
+ stage('Configuration') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ #Setting link discovery
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 1000
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+
+ ONOSES=\$((\$NUM_OF_ONOS - 1))
+ for i in \$(seq 0 \$ONOSES); do
+ INSTANCE="onos-onos-classic-\$i"
+
+ #Setting LOG level to ${logLevel}
+ kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set ${logLevel} org.onosproject
+ kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set ${logLevel} org.opencord
+
+ kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set DEBUG org.opencord.olt
+
+ kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set TRACE org.onosproject.net.meter.impl
+ done
+
+ # Set Flows/Ports/Meters poll frequency
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+
+ if [ ${withFlows} = false ]; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
+ fi
+
+ if [ ${withMibTemplate} = true ] ; then
+ rm -f BBSM-12345123451234512345-00000000000001-v1.json
+ wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
+ cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl -n \$INFRA_NS exec -it \$(kubectl -n \$INFRA_NS get pods -l app=etcd | awk 'NR==2{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
+ fi
+
+ if [ ${withPcap} = true ] && [ ${volthaStacks} -eq 1 ] ; then
+ # FIXME ofagent pcap has to be replicated per stack
+ # Start the tcp-dump in ofagent
+ export OF_AGENT=\$(kubectl -n \$INFRA_NS get pods -l app=ofagent -o name)
+ kubectl exec \$OF_AGENT -- apk update
+ kubectl exec \$OF_AGENT -- apk add tcpdump
+ kubectl exec \$OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+ _TAG=ofagent-tcpdump kubectl -n \$INFRA_NS exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
+
+ # Start the tcp-dump in radius
+ export RADIUS=\$(kubectl -n \$INFRA_NS get pods -l app=radius -o name)
+ kubectl exec \$RADIUS -- apt-get update
+ kubectl exec \$RADIUS -- apt-get install -y tcpdump
+ _TAG=radius-tcpdump kubectl -n \$INFRA_NS exec \$RADIUS -- tcpdump -w out.pcap&
+
+ # Start the tcp-dump in ONOS
+ for i in \$(seq 0 \$ONOSES); do
+ INSTANCE="onos-onos-classic-\$i"
+ kubectl exec \$INSTANCE -- apt-get update
+ kubectl exec \$INSTANCE -- apt-get install -y tcpdump
+ kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+ _TAG=\$INSTANCE kubectl -n \$INFRA_NS exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
+ done
+ else
+ echo "PCAP not supported for multiple VOLTHA stacks"
+ fi
+ """
+ }
+ }
+ }
+ stage('Setup Test') {
+ steps {
+ sh '''
+ mkdir -p $WORKSPACE/RobotLogs
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ sh '''
+ if [ ${withProfiling} = true ] ; then
+ mkdir -p $LOG_FOLDER/pprof
+ cat << EOF > $WORKSPACE/pprof.sh
+timestamp() {
+ date +"%T"
+}
+
+i=0
+while [[ true ]]; do
+ ((i++))
+ ts=$(timestamp)
+ go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
+
+ go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
+
+ go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
+
+ sleep 10
+done
+EOF
+
+ _TAG="pprof"
+ _TAG=$_TAG bash $WORKSPACE/pprof.sh &
+ fi
+ '''
+ // bbsim-sadis server takes a while to cache the subscriber entries
+ // wait for that before starting the tests
+ sleep(60)
+ }
+ }
+ stage('Run Test') {
+ steps {
+ test_voltha_stacks(params.volthaStacks)
+ }
+ }
+ }
+ post {
+ always {
+ // collect result, done in the "post" step so it's executed even in the
+ // event of a timeout in the tests
+ sh '''
+
+ # stop the kail processes
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Stopping logs for: ${app}"
+ _TAG="kail-$app"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ done
+
+ if [ ${withPcap} = true ] ; then
+ # stop ofAgent tcpdump
+ P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+
+ # stop radius tcpdump
+ P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+
+ # stop onos tcpdump
+ LIMIT=$(($NUM_OF_ONOS - 1))
+ for i in $(seq 0 $LIMIT); do
+ INSTANCE="onos-onos-classic-$i"
+ P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+ done
+
+ # copy the file
+ export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
+ kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
+
+ export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
+ kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
+
+ LIMIT=$(($NUM_OF_ONOS - 1))
+ for i in $(seq 0 $LIMIT); do
+ INSTANCE="onos-onos-classic-$i"
+ kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
+ done
+ fi
+
+ cd voltha-system-tests
+ source ./vst_venv/bin/activate
+ python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
+ cat $WORKSPACE/execution-time.txt
+ '''
+ sh '''
+ if [ ${withProfiling} = true ] ; then
+ _TAG="pprof"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ fi
+ '''
+ plot([
+ csvFileName: 'scale-test.csv',
+ csvSeries: [
+ [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ ],
+ group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
+ ])
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/report.html',
+ unstableThreshold: 0]);
+ // get all the logs from kubernetes PODs
+ sh returnStdout: false, script: '''
+
+ # store information on running charts
+ helm ls > $LOG_FOLDER/helm-list.txt || true
+
+ # store information on the running pods
+ kubectl get pods -o wide > $LOG_FOLDER/pods.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
+
+ # copy the ONOS logs directly from the container to avoid the color codes
+ printf '%s\n' $(kubectl get pods -l app=onos-onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+ # get radius logs out of the container
+ kubectl cp $(kubectl get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER//radius.log || true
+ '''
+ // dump all the BBSim(s) ONU information
+ sh '''
+ # TODO parametrize for stacks
+ BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
+ IDS=($BBSIM_IDS)
+
+ for bbsim in "${IDS[@]}"
+ do
+ kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
+ kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
+ done
+ '''
+ // get ONOS debug infos
+ sh '''
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt || true
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt || true
+
+ if [ ${withFlows} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt || true
+ fi
+
+ if [ ${provisionSubscribers} = true ]; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt || true
+ fi
+
+ if [ ${withEapol} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt || true
+ fi
+
+ if [ ${withDhcp} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt || true
+ fi
+ '''
+ // collect etcd metrics
+ sh '''
+ mkdir -p $WORKSPACE/etcd-metrics
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+ '''
+ // get VOLTHA debug infos
+ script {
+ try {
+ sh '''
+ # TODO parametrize for multiple stacks
+ voltctl -m 8MB device list -o json > $LOG_FOLDER/device-list.json || true
+ python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
+ rm $LOG_FOLDER/device-list.json || true
+ voltctl -m 8MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
+
+ printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I# bash -c "voltctl -m 8MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
+ printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
+
+ printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
+ printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
+ '''
+ } catch(e) {
+ sh '''
+ echo "Can't get device list from voltclt"
+ '''
+ }
+ }
+ // get cpu usage by container
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ sleep 60 # we have to wait for prometheus to collect all the information
+ python tests/scale/sizing.py -o $WORKSPACE/plots || true
+ fi
+ '''
+ archiveArtifacts artifacts: 'kind-voltha/install-minimal.log,execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
+ }
+ }
+}
+
+def deploy_voltha_stacks(numberOfStacks) {
+ for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+ stage("Deploy VOLTHA stack " + i) {
+ sh returnStdout: false, script: """
+ cd $WORKSPACE/kind-voltha/
+
+ export NAME=voltha${i}
+ export VOLTHA_NS=voltha${i}
+ export ADAPTER_NS=voltha${i}
+ export BBSIM_NS=voltha${i}
+ export BBSIM_BASE_INDEX=${i}
+ export WITH_ETCD=etcd.\$INFRA_NS.svc:2379
+ export WITH_KAFKA=kafka.\$INFRA_NS.svc:9092
+ export WITH_ONOS=onos-onos-classic-hs.\$INFRA_NS.svc:6653
+
+ export EXTRA_HELM_FLAGS+=' '
+
+ # Load the release defaults
+ if [ '${release.trim()}' != 'master' ]; then
+ source $WORKSPACE/kind-voltha/releases/${release}
+ EXTRA_HELM_FLAGS+=" ${extraHelmFlags} "
+ fi
+
+ # BBSim custom image handling
+ if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
+ IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
+ fi
+
+ # VOLTHA and ofAgent custom image handling
+ # NOTE to override the rw-core image in a released version you must set the ofAgent image too
+ # TODO split ofAgent and voltha-go
+ if [ '${rwCoreImg.trim()}' != '' ] && [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
+ IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
+ IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set images.rw_core.repository=\$rwCoreRepo,images.rw_core.tag=\$rwCoreTag,images.ofagent.repository=\$ofAgentRepo,images.ofagent.tag=\$ofAgentTag "
+ fi
+
+ # OpenOLT custom image handling
+ if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
+ IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=\$openoltAdapterRepo,images.adapter_open_olt.tag=\$openoltAdapterTag "
+ fi
+
+ # OpenONU custom image handling
+ if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
+ IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=\$openonuAdapterRepo,images.adapter_open_onu.tag=\$openonuAdapterTag "
+ fi
+
+ # ONOS custom image handling
+ if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
+ IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set images.onos.repository=\$onosRepo,images.onos.tag=\$onosTag "
+ fi
+
+ # set BBSim parameters
+ EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus} '
+
+ # disable the securityContext, this is a development cluster
+ EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
+
+ # No persistent-volume-claims in Atomix
+ EXTRA_HELM_FLAGS+="--set atomix.persistence.enabled=false "
+
+ echo "Installing with the following extra arguments:"
+ echo $EXTRA_HELM_FLAGS
+
+ # if it's newer than voltha-2.4 set the correct BBSIM_CFG
+ if [ '${release.trim()}' != 'voltha-2.4' ]; then
+ export BBSIM_CFG="$WORKSPACE/kind-voltha/configs/bbsim-sadis-${workflow}.yaml"
+ fi
+
+ # Use custom built images
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
+ EXTRA_HELM_FLAGS+="--set images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,images.rw_core.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
+ EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,images.adapter_open_olt.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
+ EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,images.adapter_open_onu.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
+ EXTRA_HELM_FLAGS+="--set images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,images.ofagent.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
+ EXTRA_HELM_FLAGS+="--set images.onos.repository=${dockerRegistry}/voltha/voltha-onos,images.onos.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
+ EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
+ fi
+
+ ./voltha up
+ """
+ }
+ }
+}
+
+def test_voltha_stacks(numberOfStacks) {
+ for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+ stage("Test VOLTHA stack " + i) {
+ timeout(time: 15, unit: 'MINUTES') {
+ sh """
+ export VOLTCONFIG="$HOME/.volt/config-voltha${i}"
+ ROBOT_PARAMS="-v stackId:${i} \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ --noncritical non-critical \
+ -e teardown "
+
+ if [ ${withEapol} = false ] ; then
+ ROBOT_PARAMS+="-e authentication "
+ fi
+
+ if [ ${withDhcp} = false ] ; then
+ ROBOT_PARAMS+="-e dhcp "
+ fi
+
+ if [ ${provisionSubscribers} = false ] ; then
+ # if we're not considering subscribers then we don't care about authentication and dhcp
+ ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+ fi
+
+ if [ ${withFlows} = false ] ; then
+ ROBOT_PARAMS+="-i setup -i activation "
+ fi
+
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $WORKSPACE/RobotLogs/voltha${i} \
+ \$ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+ """
+ }
+ }
+ }
+}
diff --git a/jjb/pipeline/voltha-scale-test.groovy b/jjb/pipeline/voltha-scale-test.groovy
index c4e7a59..b83b3b3 100644
--- a/jjb/pipeline/voltha-scale-test.groovy
+++ b/jjb/pipeline/voltha-scale-test.groovy
@@ -177,14 +177,16 @@
// includes monitoring, kafka, etcd
steps {
sh '''
- helm install kafka incubator/kafka --set replicas=${kafkaReplicas} --set persistence.enabled=false \
+ helm repo add bitnami https://charts.bitnami.com/bitnami
+ helm install kafka bitnami/kafka --set replicaCount=${kafkaReplicas} --set persistence.enabled=false \
--set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false \
--set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default
# the ETCD chart use "auth" for resons different than BBsim, so strip that away
ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g'
+ ETCD_FLAGS+=" --set auth.rbac.enabled=false,persistence.enabled=false,statefulset.replicaCount=${etcdReplicas}"
ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
- helm install -f $WORKSPACE/kind-voltha/values.yaml --set replicas=${etcdReplicas} etcd incubator/etcd $ETCD_FLAGS
+ helm install -f $WORKSPACE/kind-voltha/values.yaml --set replicas=${etcdReplicas} etcd bitnami/etcd $ETCD_FLAGS
if [ ${withMonitoring} = true ] ; then
helm install nem-monitoring cord/nem-monitoring \
@@ -354,7 +356,7 @@
if [ ${withMibTemplate} = true ] ; then
rm -f BBSM-12345123451234512345-00000000000001-v1.json
wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
- cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods -l app=etcd | awk 'NR==2{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
+ cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods |grep etcd | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
fi
if [ ${withPcap} = true ] ; then
diff --git a/jjb/verify/voltha-eponolt-adapter.yaml b/jjb/verify/voltha-eponolt-adapter.yaml
new file mode 100644
index 0000000..8574be8
--- /dev/null
+++ b/jjb/verify/voltha-eponolt-adapter.yaml
@@ -0,0 +1,32 @@
+---
+# verification jobs for 'voltha-eponolt-adapter' repo
+
+- project:
+ name: voltha-eponolt-adapter
+ project: '{name}'
+
+ jobs:
+ - 'verify-voltha-eponolt-adapter-jobs':
+ branch-regexp: '{all-branches-regexp}'
+ - 'publish-voltha-eponolt-adapter-jobs':
+ branch-regexp: '{all-branches-regexp}'
+
+- job-group:
+ name: 'verify-voltha-eponolt-adapter-jobs'
+ jobs:
+ - 'verify-licensed'
+ - 'tag-collision-reject':
+ dependency-jobs: 'verify_voltha-eponolt-adapter_licensed'
+ - 'make-unit-test':
+ dest-gopath: "github.com/opencord"
+ unit-test-targets: 'lint sca test'
+ unit-test-keep-going: 'true'
+
+- job-group:
+ name: 'publish-voltha-eponolt-adapter-jobs'
+ jobs:
+ - 'docker-publish':
+ build-timeout: 30
+ docker-repo: 'voltha'
+ dependency-jobs: 'version-tag'
+ extraEnvironmentVars: BUILD_PROFILED=true
diff --git a/jjb/verify/voltha-openonu-adapter-go.yaml b/jjb/verify/voltha-openonu-adapter-go.yaml
index 00bfd35..c55dabd 100644
--- a/jjb/verify/voltha-openonu-adapter-go.yaml
+++ b/jjb/verify/voltha-openonu-adapter-go.yaml
@@ -16,7 +16,20 @@
jobs:
- 'verify-licensed'
- 'tag-collision-reject'
- - 'make-unit-test'
+ - 'make-unit-test':
+ dest-gopath: "github.com/opencord"
+ name-extension: "-lint"
+ unit-test-targets: 'lint sca'
+ unit-test-keep-going: 'true'
+ junit-allow-empty-results: true
+ build-node: 'ubuntu16.04-basebuild-2c-4g'
+ - 'make-unit-test':
+ dest-gopath: "github.com/opencord"
+ name-extension: "-tests"
+ unit-test-targets: 'test'
+ unit-test-keep-going: 'true'
+ junit-allow-empty-results: true
+ build-node: 'ubuntu16.04-basebuild-2c-4g'
- 'voltha-patch-test':
pipeline-script: 'voltha-openonu-go-tests.groovy'
diff --git a/jjb/voltha-scale.yaml b/jjb/voltha-scale.yaml
index adf2758..9e08b81 100644
--- a/jjb/voltha-scale.yaml
+++ b/jjb/voltha-scale.yaml
@@ -27,7 +27,6 @@
openonuAdapterReplicas: 1
openonuAdapterImg: voltha/voltha-openonu-adapter-go:master
extraHelmFlags: '--set use_openonu_adapter_go=true'
- onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
- 'voltha-scale-measurements':
name: 'voltha-openonu-go-scale-measurements-master-1-16-32-att-subscribers'
@@ -44,7 +43,6 @@
withIgmp: false
openonuAdapterReplicas: 1
openonuAdapterImg: voltha/voltha-openonu-adapter-go:master
- onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
extraHelmFlags: '--set use_openonu_adapter_go=true,authRetry=true,dhcpRetry=true'
# this job will be used to test custom images without disrupting tests on master
@@ -66,6 +64,29 @@
extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
withPcap: true
+ - 'voltha-scale-measurements':
+ name: 'voltha-scale-measurements-master-experimental-multi-stack'
+ build-node: 'onf-pod1-head-node'
+ pipeline-script: 'voltha-scale-multi-stack.groovy'
+ 'disable-job': false
+ # trigger on Feb 29th (a.k.a only trigger it manually)
+ # time-trigger: "H 0 29 2 *"
+ time-trigger: "H H/4 * * *"
+ withMonitoring: false
+ volthaStacks: 2
+ olts: 2
+ pons: 8
+ onus: 16
+ withFlows: true
+ provisionSubscribers: true
+ withEapol: true
+ withDhcp: true
+ withIgmp: false
+ extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
+ withPcap: true
+ volthaSystemTestsChange: refs/changes/27/21627/2
+ kindVolthaChange: refs/changes/85/21485/8
+
# jobs for 512 ONUs with a 8 openonu-adapters and clustered ONOS (1 OLT)
- 'voltha-scale-measurements':
@@ -82,7 +103,6 @@
withDhcp: true
withIgmp: false
extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
- onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-1-16-32-tt-subscribers'
@@ -99,7 +119,6 @@
withDhcp: true
withIgmp: true
extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
- onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-1-16-32-dt-subscribers'
@@ -132,7 +151,6 @@
withDhcp: true
withIgmp: false
extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
- onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-2-16-32-dt-subscribers'
@@ -149,7 +167,6 @@
withDhcp: false
withIgmp: false
extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
- onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-2-16-32-tt-subscribers'
@@ -169,7 +186,6 @@
onosReplicas: 3
atomixReplicas: 3
extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
- onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
# voltha-2.5 Jobs
- 'voltha-scale-measurements':
@@ -315,6 +331,11 @@
name: voltha-scale-job-parameters
parameters:
- string:
+ name: pipeline-script
+ default: '{pipeline-script}'
+ description: 'The pipeline script to use'
+
+ - string:
name: release
default: '{release}'
description: 'Version of the code to test (matches a branch in kind-voltha and voltha-system-tests repos)'
@@ -335,6 +356,11 @@
description: 'Log level for all the components'
- string:
+ name: volthaStacks
+ default: '{volthaStacks}'
+ description: 'Number of VOLTHA Stacks to deploy'
+
+ - string:
name: onus
default: '{onus}'
description: 'Number of ONUs to provision'
@@ -527,7 +553,6 @@
- job-template:
id: 'voltha-scale-measurements'
name: '{name}'
- pipeline-script: 'voltha-scale-test.groovy'
disabled: '{disable-job}'
description: |
@@ -547,6 +572,7 @@
jenkins-ssh-credential: '{jenkins-ssh-credential}'
# default values
+ pipeline-script: 'voltha-scale-test.groovy'
release: master
bbsimImg: voltha/bbsim:master
@@ -563,6 +589,7 @@
onosChart: onos/onos-classic
radiusChart: onf/freeradius
+ volthaStacks: 1
olts: 2
pons: 2
onus: 2
@@ -628,7 +655,6 @@
- job-template:
id: 'voltha-scale-measurements-dev'
name: '{name}'
- pipeline-script: 'voltha-scale-test.groovy'
description: |
<!-- Managed by Jenkins Job Builder -->
@@ -647,6 +673,7 @@
jenkins-ssh-credential: '{jenkins-ssh-credential}'
# default values
+ pipeline-script: 'voltha-scale-test.groovy'
release: master
bbsimImg: voltha/bbsim:master
@@ -663,6 +690,7 @@
onosChart: onos/onos-classic
radiusChart: onf/freeradius
+ volthaStacks: 1
olts: 2
pons: 2
onus: 2