[VOL-3780] Unifying tucson POD pipelines and migrating to voltha charts
Change-Id: I010087d59ae9745904aa1effa0b4bbad5e5b84f1
diff --git a/jjb/pipeline/voltha/master/tucson-build-and-test.groovy b/jjb/pipeline/voltha/master/tucson-build-and-test.groovy
new file mode 100644
index 0000000..d400681
--- /dev/null
+++ b/jjb/pipeline/voltha/master/tucson-build-and-test.groovy
@@ -0,0 +1,312 @@
+
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// used to deploy VOLTHA and configure ONOS physical PODs
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+def clusterName = "kind-ci"
+pipeline {
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 120, unit: 'MINUTES')
+ }
+ environment {
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+ KUBECONFIG="$HOME/.kube/kind-${clusterName}"
+ VOLTCONFIG="$HOME/.volt/config"
+ }
+ stages{
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ gerritProject: "${gerritProject}",
+ gerritRefspec: "${gerritRefspec}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage ("Parse deployment configuration file") {
+ steps {
+ sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+ sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
+ script {
+ if ( params.workflow.toUpperCase() == "DT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ }
+ else if ( params.workflow.toUpperCase() == "TT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+ else {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ }
+ }
+ }
+ stage('Clean up') {
+ steps {
+ timeout(15) {
+ script {
+ helmTeardown(["default", infraNamespace, volthaNamespace])
+ }
+ timeout(1) {
+ sh returnStdout: false, script: '''
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
+ '''
+ }
+ }
+ }
+ }
+ stage('Build patch') {
+ steps {
+ // NOTE that the correct patch has already been checked out
+ // during the getVolthaCode step
+ buildVolthaComponent("${gerritProject}")
+ }
+ }
+ stage('Create K8s Cluster') {
+ steps {
+ script {
+ def clusterExists = sh returnStdout: true, script: """
+ kind get clusters | grep ${clusterName} | wc -l
+ """
+ if (clusterExists.trim() == "0") {
+ createKubernetesCluster([nodes: 3, name: clusterName])
+ }
+ }
+ }
+ }
+ stage('Load image in kind nodes') {
+ steps {
+ loadToKind()
+ }
+ }
+ stage('Install Voltha') {
+ steps {
+ timeout(20) {
+ script {
+ imageFlags = getVolthaImageFlags(gerritProject)
+ // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+ def localCharts = false
+ if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts") {
+ localCharts = true
+ }
+ def extraHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml ${imageFlags} "
+ // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+ extraHelmFlags = extraHelmFlags + "--set onos-classic.onosSshPort=30115 " +
+ "--set onos-classic.onosApiPort=30120 " +
+ "--set onos-classic.onosOfPort=31653 " +
+ "--set onos-classic.individualOpenFlowNodePorts=true "
+ volthaDeploy([
+ workflow: workFlow.toLowerCase(),
+ extraHelmFlags: extraHelmFlags,
+ localCharts: localCharts,
+ kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+ onosReplica: 3,
+ atomixReplica: 3,
+ kafkaReplica: 3,
+ etcdReplica: 3,
+ ])
+ }
+ // start logging
+ sh """
+ mkdir -p $WORKSPACE/${workFlow}
+ _TAG=kail-${workFlow} kail -n infra -n voltha > $WORKSPACE/${workFlow}/onos-voltha-combined.log &
+ """
+ sh """
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+ ps aux | grep port-forward
+ """
+ getPodsInfo("$WORKSPACE")
+ }
+ }
+ }
+ stage('Deploy Kafka Dump Chart') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ helm repo add cord https://charts.opencord.org
+ helm repo update
+ if helm version -c --short|grep v2 -q; then
+ helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+ else
+ helm install voltha-kafka-dump cord/voltha-kafka-dump
+ fi
+ """
+ }
+ }
+ }
+ stage('Push Tech-Profile') {
+ when {
+ expression { params.profile != "Default" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+ kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+ """
+ }
+ }
+
+ stage('Push Sadis-config') {
+ steps {
+ sh returnStdout: false, script: """
+ ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
+ ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+
+ if [[ "${workFlow.toUpperCase()}" == "DT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+ elif [[ "${workFlow.toUpperCase()}" == "TT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+ else
+ # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+ fi
+ """
+ }
+ }
+ stage('Reinstall OLT software') {
+ when {
+ expression { params.reinstallOlt }
+ }
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 0
+ }
+ if ( params.branch == 'voltha-2.3' ) {
+ oltDebVersion = oltDebVersionVoltha23
+ } else {
+ oltDebVersion = oltDebVersionMaster
+ }
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 1
+ }
+ if ( olt.fortygig ) {
+ // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+ }
+ }
+ }
+ }
+ }
+
+ stage('Restart OLT processes') {
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+ sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
+ sleep 120
+ """
+ waitUntil {
+ onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+ return onu_discovered.toInteger() > 0
+ }
+ }
+ }
+ }
+ }
+ stage('Run E2E Tests') {
+ steps {
+ script {
+ if ( params.workflow.toUpperCase() == "DT" ) {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ }
+ else if ( params.workflow.toUpperCase() == "TT" ) {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+ else {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ }
+ sh returnStdout: false, script: """
+ mkdir -p $WORKSPACE/RobotLogs
+
+ export ROBOT_CONFIG_FILE="$WORKSPACE/${robotConfigFile}"
+ export ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+ export ROBOT_FILE="Voltha_PODTests.robot"
+
+ # If the Gerrit comment contains a line with "functional tests" then run the full
+ # functional test suite. This covers tests tagged either 'sanity' or 'functional'.
+ # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+ REGEX="functional tests"
+ if [[ "${gerritComment}" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i functional"
+ fi
+ # Likewise for dataplane tests
+ REGEX="dataplane tests"
+ if [[ "${gerritComment}" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i dataplane"
+ fi
+
+ make -C $WORKSPACE/voltha-system-tests voltha-test || true
+ """
+ }
+ }
+ }
+ post {
+ always {
+ // stop logging
+ sh """
+ P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workFlow}" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_IDS" ]; then
+ echo \$P_IDS
+ for P_ID in \$P_IDS; do
+ kill -9 \$P_ID
+ done
+ fi
+ gzip $WORKSPACE/${workFlow}/onos-voltha-combined.log || true
+ """
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output*.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/report*.html',
+ unstableThreshold: 0]);
+ archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz'
+ }
+ }
+}
+
+// refs/changes/06/24206/5