| // Copyright 2017-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| // voltha-2.x e2e tests |
| // uses kind-voltha to deploy voltha-2.X |
| // uses bbsim to simulate OLT/ONUs |
| |
| pipeline { |
| |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: 90, unit: 'MINUTES') |
| } |
| environment { |
| KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal" |
| VOLTCONFIG="$HOME/.volt/config-minimal" |
| PATH="$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" |
| TYPE="minimal" |
| FANCY=0 |
| WITH_SIM_ADAPTERS="n" |
| WITH_RADIUS="y" |
| WITH_BBSIM="y" |
| DEPLOY_K8S="y" |
| VOLTHA_LOG_LEVEL="DEBUG" |
| CONFIG_SADIS="external" |
| BBSIM_CFG="configs/bbsim-sadis-att.yaml" |
| ROBOT_MISC_ARGS="-d $WORKSPACE/RobotLogs" |
| } |
| stages { |
| stage('Clone kind-voltha') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/kind-voltha", |
| refspec: "${kindVolthaChange}" |
| ]], |
| branches: [[ name: "master", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| sh """ |
| if [ '${kindVolthaChange}' != '' ] ; then |
| cd $WORKSPACE/kind-voltha |
| git fetch https://gerrit.opencord.org/kind-voltha ${kindVolthaChange} && git checkout FETCH_HEAD |
| fi |
| """ |
| } |
| } |
| stage('Clone voltha-system-tests') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/voltha-system-tests", |
| refspec: "${volthaSystemTestsChange}" |
| ]], |
| branches: [[ name: "${branch}", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| sh """ |
| if [ '${volthaSystemTestsChange}' != '' ] ; then |
| cd $WORKSPACE/voltha-system-tests |
| git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD |
| fi |
| """ |
| } |
| } |
| // If the repo under test is not kind-voltha |
| // then download it and checkout the patch |
| stage('Download Patch') { |
| when { |
| expression { |
| return "${gerritProject}" != 'kind-voltha'; |
| } |
| } |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/${gerritProject}", |
| refspec: "${gerritRefspec}" |
| ]], |
| branches: [[ name: "${branch}", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "${gerritProject}"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| sh """ |
| pushd $WORKSPACE/${gerritProject} |
| git fetch https://gerrit.opencord.org/${gerritProject} ${gerritRefspec} && git checkout FETCH_HEAD |
| echo "Currently on commit: \n" |
| git log -1 --oneline |
| popd |
| """ |
| } |
| } |
| // If the repo under test is kind-voltha we don't need to download it again, |
| // as we already have it, simply checkout the patch |
| stage('Checkout kind-voltha patch') { |
| when { |
| expression { |
| return "${gerritProject}" == 'kind-voltha'; |
| } |
| } |
| steps { |
| sh """ |
| cd $WORKSPACE/kind-voltha |
| git fetch https://gerrit.opencord.org/kind-voltha ${gerritRefspec} && git checkout FETCH_HEAD |
| """ |
| } |
| } |
| stage('Create K8s Cluster') { |
| steps { |
| sh """ |
| cd $WORKSPACE/kind-voltha/ |
| JUST_K8S=y ./voltha up |
| bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b "$WORKSPACE/kind-voltha/bin" |
| """ |
| } |
| } |
| |
| stage('Build Images') { |
| steps { |
| sh """ |
| make -C $WORKSPACE/voltha-openonu-adapter-go DOCKER_REPOSITORY=voltha/ DOCKER_TAG=citest docker-build |
| """ |
| } |
| } |
| |
| stage('Push Images') { |
| steps { |
| sh ''' |
| docker images | grep citest |
| for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}"); do echo "Pushing \$image to nodes"; kind load docker-image \$image:citest --name voltha-\$TYPE --nodes voltha-\$TYPE-worker,voltha-\$TYPE-worker2; done |
| ''' |
| } |
| } |
| stage('Deploy Voltha') { |
| steps { |
| sh ''' |
| export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} " |
| |
| IMAGES="adapter_open_onu_go" |
| |
| for I in \$IMAGES |
| do |
| EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never " |
| done |
| |
| cd $WORKSPACE/kind-voltha/ |
| echo \$EXTRA_HELM_FLAGS |
| kail -n voltha -n default > $WORKSPACE/onos-voltha-combined.log & |
| ./voltha up |
| ''' |
| } |
| } |
| |
| stage('Run E2E Tests') { |
| environment { |
| ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/openonu-go" |
| } |
| steps { |
| sh ''' |
| mkdir -p $ROBOT_LOGS_DIR |
| export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR" |
| export TARGET_DEFAULT=openonu-go-adapter-test |
| |
| make -C $WORKSPACE/voltha-system-tests \$TARGET_DEFAULT || true |
| |
| export TARGET_1T8GEM=1t8gem-openonu-go-adapter-test |
| |
| make -C $WORKSPACE/voltha-system-tests \$TARGET_1T8GEM || true |
| ''' |
| } |
| } |
| |
| stage('Run MIB Upload Tests') { |
| environment { |
| ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/openonu-go-MIB" |
| } |
| steps { |
| sh ''' |
| cd $WORKSPACE/kind-voltha/ |
| #source $NAME-env.sh |
| WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down |
| |
| export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} " |
| |
| export EXTRA_HELM_FLAGS+="--set pon=2,onu=2,controlledActivation=only-onu " |
| |
| IMAGES="adapter_open_onu_go" |
| |
| for I in \$IMAGES |
| do |
| EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never " |
| done |
| |
| DEPLOY_K8S=n ./voltha up |
| |
| mkdir -p $ROBOT_LOGS_DIR |
| export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR" |
| export TARGET_DEFAULT=mib-upload-templating-openonu-go-adapter-test |
| |
| make -C $WORKSPACE/voltha-system-tests \$TARGET_DEFAULT || true |
| ''' |
| } |
| } |
| |
| stage('DT workflow') { |
| environment { |
| ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/DTWorkflow" |
| } |
| steps { |
| sh ''' |
| cd $WORKSPACE/kind-voltha/ |
| #source $NAME-env.sh |
| WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down |
| |
| export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} " |
| |
| IMAGES="adapter_open_onu_go" |
| |
| for I in \$IMAGES |
| do |
| EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never " |
| done |
| |
| # Workflow-specific flags |
| export WITH_RADIUS=no |
| export WITH_EAPOL=no |
| export WITH_DHCP=no |
| export WITH_IGMP=no |
| export CONFIG_SADIS="external" |
| export BBSIM_CFG="configs/bbsim-sadis-dt.yaml" |
| |
| DEPLOY_K8S=n ./voltha up |
| |
| mkdir -p $ROBOT_LOGS_DIR |
| export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR -e PowerSwitch" |
| |
| # By default, all tests tagged 'sanityDt' are run. This covers basic functionality |
| # like running through the DT workflow for a single subscriber. |
| export TARGET=sanity-kind-dt |
| |
| # If the Gerrit comment contains a line with "functional tests" then run the full |
| # functional test suite. This covers tests tagged either 'sanityDt' or 'functionalDt'. |
| # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line |
| REGEX="functional tests" |
| if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then |
| TARGET=functional-single-kind-dt |
| fi |
| |
| make -C $WORKSPACE/voltha-system-tests \$TARGET || true |
| ''' |
| } |
| } |
| |
| stage('ATT workflow') { |
| environment { |
| ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ATTWorkflow" |
| } |
| steps { |
| sh ''' |
| cd $WORKSPACE/kind-voltha/ |
| WAIT_ON_DOWN=y DEPLOY_K8S=n ./voltha down |
| |
| export EXTRA_HELM_FLAGS+="--set use_openonu_adapter_go=true,log_agent.enabled=False ${extraHelmFlags} " |
| |
| IMAGES="adapter_open_onu_go" |
| |
| for I in \$IMAGES |
| do |
| EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never " |
| done |
| |
| # Workflow-specific flags |
| export WITH_RADIUS=yes |
| export WITH_EAPOL=yes |
| export WITH_BBSIM=yes |
| export DEPLOY_K8S=yes |
| export CONFIG_SADIS="external" |
| export BBSIM_CFG="configs/bbsim-sadis-att.yaml" |
| |
| if [ "${gerritProject}" = "voltctl" ]; then |
| export VOLTCTL_VERSION=$(cat $WORKSPACE/voltctl/VERSION) |
| cp $WORKSPACE/voltctl/voltctl $WORKSPACE/kind-voltha/bin/voltctl |
| md5sum $WORKSPACE/kind-voltha/bin/voltctl |
| fi |
| |
| DEPLOY_K8S=n ./voltha up |
| |
| mkdir -p $ROBOT_LOGS_DIR |
| export ROBOT_MISC_ARGS="-d $ROBOT_LOGS_DIR -e PowerSwitch" |
| |
| # By default, all tests tagged 'sanity' are run. This covers basic functionality |
| # like running through the ATT workflow for a single subscriber. |
| export TARGET=sanity-single-kind |
| |
| # If the Gerrit comment contains a line with "functional tests" then run the full |
| # functional test suite. This covers tests tagged either 'sanity' or 'functional'. |
| # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line |
| REGEX="functional tests" |
| if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then |
| TARGET=functional-single-kind |
| fi |
| |
| make -C $WORKSPACE/voltha-system-tests \$TARGET || true |
| ''' |
| } |
| } |
| } |
| post { |
| always { |
| sh ''' |
| set +e |
| cp $WORKSPACE/kind-voltha/install-minimal.log $WORKSPACE/ |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq |
| kubectl get nodes -o wide |
| kubectl get pods -o wide |
| kubectl get pods -n voltha -o wide |
| |
| sync |
| pkill kail || true |
| md5sum $WORKSPACE/kind-voltha/bin/voltctl |
| |
| ## Pull out errors from log files |
| extract_errors_go() { |
| echo |
| echo "Error summary for $1:" |
| grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg' |
| echo |
| } |
| |
| extract_errors_python() { |
| echo |
| echo "Error summary for $1:" |
| grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2- |
| echo |
| } |
| |
| extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log |
| extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log |
| extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log |
| extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log |
| |
| gzip $WORKSPACE/onos-voltha-combined.log |
| |
| |
| ## shut down kind-voltha |
| if [ "${branch}" != "master" ]; then |
| echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}" |
| source "$WORKSPACE/kind-voltha/releases/${branch}" |
| else |
| echo "on master, using default settings for kind-voltha" |
| fi |
| |
| cd $WORKSPACE/kind-voltha |
| WAIT_ON_DOWN=y ./voltha down |
| ''' |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: 'RobotLogs/*/log*.html', |
| otherFiles: '', |
| outputFileName: 'RobotLogs/*/output*.xml', |
| outputPath: '.', |
| passThreshold: 100, |
| reportFileName: 'RobotLogs/*/report*.html', |
| unstableThreshold: 0]); |
| archiveArtifacts artifacts: '*.log,*.gz' |
| } |
| } |
| } |