blob: 3ffe2238f8bb57478446175ffa1dbe6d7541903e [file] [log] [blame]
// Copyright 2021-2023 Open Networking Foundation (ONF) and the ONF Contributors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// voltha-2.x e2e tests for openonu-go
// uses bbsim to simulate OLT/ONUs
// [TODO] Update syntax below to the latest supported
library identifier: 'cord-jenkins-libraries@master',
retriever: modernSCM([
$class: 'GitSCMSource',
remote: 'https://gerrit.opencord.org/ci-management.git'
])
//------------------//
//---] GLOBAL [---//
//------------------//
String clusterName = 'kind-ci' // was def
// -----------------------------------------------------------------------
// Intent:
// -----------------------------------------------------------------------
String branchName() {
String name = 'master'
// [TODO] Sanity check the target branch
// if (name != jenkins.branch) { fatal }
return(name)
}
// -----------------------------------------------------------------------
// Intent: Due to lack of a reliable stack trace, construct a literal.
// Jenkins will re-write the call stack for serialization.
// -----------------------------------------------------------------------
String getIam(String func) {
String branchName = branchName()
String src = [
'ci-management',
'jjb',
'pipeline',
'voltha',
branchName,
'bbsim-tests.groovy'
].join('/')
String name = [src, func].join('::')
return(name)
}
// -----------------------------------------------------------------------
// Intent: Determine if working on a release branch.
// Note: Conditional is legacy, should also check for *-dev or *-pre
// -----------------------------------------------------------------------
Boolean isReleaseBranch(String name)
{
// List modifiers = ['-dev', '-pre', 'voltha-x.y.z-pre']
// if branchName in modifiers
return(name != 'master') // OR branchName.contains('-')
}
// -----------------------------------------------------------------------
// Intent:
// -----------------------------------------------------------------------
void execute_test(testTarget, workflow, testLogging, teardown, testSpecificHelmFlags='')
{
String infraNamespace = 'default'
String volthaNamespace = 'voltha'
String logsDir = "$WORKSPACE/${testTarget}"
stage('IAM')
{
script
{
// Announce ourselves for log usability
String iam = getIam('execute_test')
println("${iam}: ENTER")
println("${iam}: LEAVE")
}
}
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Cleanup')
{
if (teardown) {
timeout(15) {
script {
helmTeardown(['default', infraNamespace, volthaNamespace])
}
timeout(1) {
sh returnStdout: false, script: '''
# remove orphaned port-forward from different namespaces
ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
'''
}
}
}
}
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Deploy common infrastructure')
{
sh '''
helm repo add onf https://charts.opencord.org
helm repo update
if [ ${withMonitoring} = true ] ; then
helm install nem-monitoring onf/nem-monitoring \
--set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
--set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
fi
'''
}
stage('Deploy Voltha')
{
if (teardown)
{
timeout(10)
{
script
{
sh """
mkdir -p ${logsDir}
_TAG=kail-startup kail -n ${infraNamespace} -n ${volthaNamespace} > ${logsDir}/onos-voltha-startup-combined.log &
"""
// if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
Boolean localCharts = false
if (volthaHelmChartsChange != ''
|| gerritProject == 'voltha-helm-charts'
|| isReleaseBranch(branch) // branch != 'master'
) {
localCharts = true
}
String branchName = branchName()
Boolean is_release = isReleaseBranch(branch)
println([
" ** localCharts=${localCharts}",
"branchName=${branchName}",
"branch=${branch}",
"branch=isReleaseBranch=${is_release}",
].join(', '))
// -----------------------------------------------------------------------
// Rewrite localHelmFlags using array join, moving code around and
// refactoring into standalone functions
// -----------------------------------------------------------------------
// hudson.remoting.ProxyException: groovy.lang.MissingMethodException:
// No signature of method: java.lang.String.positive() is applicable for argument types: () values: []
// -----------------------------------------------------------------------
// NOTE temporary workaround expose ONOS node ports
// -----------------------------------------------------------------------
String localHelmFlags = [
extraHelmFlags.trim(),
"--set global.log_level=${logLevel.toUpperCase()}",
'--set onos-classic.onosSshPort=30115',
'--set onos-classic.onosApiPort=30120',
'--set onos-classic.onosOfPort=31653',
'--set onos-classic.individualOpenFlowNodePorts=true',
testSpecificHelmFlags
].join(' ')
println("** localHelmFlags = ${localHelmFlags}")
if (gerritProject != '') {
localHelmFlags = "${localHelmFlags} " + getVolthaImageFlags("${gerritProject}")
}
println('volthaDeploy: ENTER')
volthaDeploy([
infraNamespace: infraNamespace,
volthaNamespace: volthaNamespace,
workflow: workflow.toLowerCase(),
withMacLearning: enableMacLearning.toBoolean(),
extraHelmFlags: localHelmFlags,
localCharts: localCharts,
bbsimReplica: olts.toInteger(),
dockerRegistry: registry,
])
println('volthaDeploy: LEAVE')
} // script
// -----------------------------------------------------------------------
// Intent: Replacing P_IDS with pgrep/pkill is a step forward.
// Why not simply use a pid file, capture _TAG=kail-startup above
// Grep runs the risk of terminating stray commands (??-good <=> bad-??)
// -----------------------------------------------------------------------
script {
println('Try out pgrep/pkill commands')
sh('''pgrep --list-full kail-startup || true''')
}
// -----------------------------------------------------------------------
// stop logging
// -----------------------------------------------------------------------
sh """
P_IDS="\$(ps e -ww -A | grep "_TAG=kail-startup" | grep -v grep | awk '{print \$1}')"
if [ -n "\$P_IDS" ]; then
echo \$P_IDS
for P_ID in \$P_IDS; do
kill -9 \$P_ID
done
fi
cd ${logsDir}
gzip -k onos-voltha-startup-combined.log
rm onos-voltha-startup-combined.log
"""
}
sh """
JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
bbsimDmiPortFwd=50075
for i in {0..${olts.toInteger() - 1}}; do
JENKINS_NODE_COOKIE="dontKillMe" _TAG="bbsim\${i}" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/bbsim\${i} \${bbsimDmiPortFwd}:50075; done"&
((bbsimDmiPortFwd++))
done
if [ ${withMonitoring} = true ] ; then
JENKINS_NODE_COOKIE="dontKillMe" _TAG="nem-monitoring-prometheus-server" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n default svc/nem-monitoring-prometheus-server 31301:80; done"&
fi
ps aux | grep port-forward
"""
// setting ONOS log level
script
{
println('** setOnosLogLevels: ENTER')
setOnosLogLevels([
onosNamespace: infraNamespace,
apps: [
'org.opencord.dhcpl2relay',
'org.opencord.olt',
'org.opencord.aaa',
'org.opencord.maclearner',
'org.onosproject.net.flowobjective.impl.FlowObjectiveManager',
'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager'
],
logLevel: logLevel
])
println('** setOnosLogLevels: LEAVE')
} // script
} // if (teardown)
} // stage('Deploy Voltha')
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage("Run test ${testTarget} on workflow ${workflow}")
{
sh """
echo -e '** Monitor memory consumption: ENTER'
if [ ${withMonitoring} = true ] ; then
cat <<EOM
** -----------------------------------------------------------------------
** Monitoring memory usage with mem_consumption.py
** -----------------------------------------------------------------------
EOM
mkdir -p "$WORKSPACE/voltha-pods-mem-consumption-${workflow}"
cd "$WORKSPACE/voltha-system-tests"
echo '** Installing python virtualenv'
make venv-activate-patched
set +u && source .venv/bin/activate && set -u
# Collect initial memory consumption
python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption-${workflow} -a 0.0.0.0:31301 -n ${volthaNamespace}
fi
echo -e '** Monitor memory consumption: LEAVE\n'
"""
sh """
echo -e "\n** make testTarget=[${testTarget}]"
mkdir -p ${logsDir}
export ROBOT_MISC_ARGS="-d ${logsDir} ${params.extraRobotArgs} "
ROBOT_MISC_ARGS+="-v ONOS_SSH_PORT:30115 -v ONOS_REST_PORT:30120 -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace} -v container_log_dir:${logsDir} -v logging:${testLogging}"
export KVSTOREPREFIX=voltha/voltha_voltha
make -C "$WORKSPACE/voltha-system-tests" ${testTarget}
"""
getPodsInfo("${logsDir}")
sh """
echo -e '\n** Gather robot Framework logs: ENTER'
# set +e
# collect logs collected in the Robot Framework StartLogging keyword
cd ${logsDir}
gzip *-combined.log
rm -f *-combined.log
echo -e '** Gather robot Framework logs: LEAVE\n'
"""
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
sh """
echo -e '** Monitor pod-mem-consumption: ENTER'
if [ ${withMonitoring} = true ] ; then
cat <<EOM
** -----------------------------------------------------------------------
** Monitoring pod-memory-consumption using mem_consumption.py
** -----------------------------------------------------------------------
EOM
cd "$WORKSPACE/voltha-system-tests"
echo '** Installing python virtualenv'
make venv-activate-patched
set +u && source .venv/bin/activate && set -u
# Collect memory consumption of voltha pods once all the tests are complete
python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption-${workflow} -a 0.0.0.0:31301 -n ${volthaNamespace}
fi
echo -e '** Monitor pod-mem-consumption: LEAVE\n'
"""
} // stage
return
} // execute_test()
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
def collectArtifacts(exitStatus) {
String iam = getIam('execute_test')
echo '''
** -----------------------------------------------------------------------
** collectArtifacts
** -----------------------------------------------------------------------
'''
println("${iam}: ENTER (exitStatus=${exitStatus})")
getPodsInfo("$WORKSPACE/${exitStatus}")
sh """
kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/${exitStatus}/voltha.log
"""
archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.txt,**/*.html,**/voltha-pods-mem-consumption-att/*,**/voltha-pods-mem-consumption-dt/*,**/voltha-pods-mem-consumption-tt/*'
sh(returnStdout:true, script: '''
sync
echo '** Running: pgrep --list-full kail-startup (ENTER)'
pgrep --list-full 'kail-startup' || true
[[ $(pgrep --count kail) -gt 0 ]] && pkill --echo kail
echo '** Running: pgrep --list-full kail-startup (LEAVE)'
''')
println("${iam}: ENTER RobotPublisher")
step([$class: 'RobotPublisher',
disableArchiveOutput: false,
logFileName: '**/*/log*.html',
otherFiles: '',
outputFileName: '**/*/output*.xml',
outputPath: '.',
passThreshold: 100,
reportFileName: '**/*/report*.html',
unstableThreshold: 0,
onlyCritical: true]);
println("${iam}: LEAVE RobotPublisher")
println("${iam}: LEAVE (exitStatus=${exitStatus})")
return
}
// -----------------------------------------------------------------------
// Intent: main
// -----------------------------------------------------------------------
pipeline {
/* no label, executor is determined by JJB */
agent {
label "${params.buildNode}"
}
options {
timeout(time: "${timeout}", unit: 'MINUTES')
}
environment {
KUBECONFIG = "$HOME/.kube/kind-${clusterName}"
VOLTCONFIG = "$HOME/.volt/config"
PATH = "$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
DIAGS_PROFILE = 'VOLTHA_PROFILE'
SSHPASS = 'karaf'
}
stages {
stage('Download Code') {
steps {
getVolthaCode([
branch: "${branch}",
gerritProject: "${gerritProject}",
gerritRefspec: "${gerritRefspec}",
volthaSystemTestsChange: "${volthaSystemTestsChange}",
volthaHelmChartsChange: "${volthaHelmChartsChange}",
])
}
}
stage('Build patch v1.1')
{
// build the patch only if gerritProject is specified
when
{
expression
{
return !gerritProject.isEmpty()
}
}
steps
{
// NOTE that the correct patch has already been checked out
// during the getVolthaCode step
buildVolthaComponent("${gerritProject}")
}
}
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Install Kail')
{
steps
{
script
{
String cmd = [
'make',
'--no-print-directory',
'-C', "$WORKSPACE/voltha-system-tests",
"KAIL_PATH=\"$WORKSPACE/bin\"",
'kail',
].join(' ')
println(" ** Running: ${cmd}:\n")
sh("${cmd}")
} // script
} // steps
} // stage
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Install Kind')
{
steps
{
script
{
String cmd = [
'make',
'--no-print-directory',
'-C', "$WORKSPACE/voltha-system-tests",
"KIND_PATH=\"$WORKSPACE/bin\"",
'install-command-kind',
].join(' ')
println(" ** Running: ${cmd}:\n")
sh("${cmd}")
} // script
} // steps
} // stage
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Create K8s Cluster')
{
steps
{
script
{
def clusterExists = sh(
returnStdout: true,
script: """kind get clusters | grep "${clusterName}" | wc -l""")
if (clusterExists.trim() == '0')
{
createKubernetesCluster([nodes: 3, name: clusterName])
}
} // script
} // steps
} // stage('Create K8s Cluster')
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Replace voltctl')
{
// if the project is voltctl, override the downloaded one with the built one
when {
expression {
return gerritProject == 'voltctl'
}
}
// Hmmmm(?) where did the voltctl download happen ?
// Likely Makefile but would be helpful to document here.
steps
{
println("${iam} Running: installVoltctl($branch)")
installVoltctl("$branch")
} // steps
} // stage
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Load image in kind nodes')
{
when {
expression {
return !gerritProject.isEmpty()
}
}
steps {
loadToKind()
} // steps
} // stage
// -----------------------------------------------------------------------
// -----------------------------------------------------------------------
stage('Parse and execute tests')
{
steps {
script {
def tests = readYaml text: testTargets
tests.eachWithIndex { test, idx ->
println "** readYaml test suite[$idx]) test=[${test}]"
// def test = tests[i]
String target = test['target']
String workflow = test['workflow']
String flags = test['flags']
Boolean teardown = test['teardown'].toBoolean()
Boolean logging = test['logging'].toBoolean()
String testLogging = (logging) ? 'True' : 'False'
println "Executing test ${target} on workflow ${workflow} with logging ${testLogging} and extra flags ${flags}"
println "Executing test ${target}: ENTER"
execute_test(target, workflow, testLogging, teardown, flags)
println "Executing test ${target}: LEAVE"
} // for
String iam = getIam('Parse and execute tests')
println("** ${iam} ran to completion")
} // script
} // steps
} // stage
} // stages
post
{
aborted { collectArtifacts('aborted') }
failure { collectArtifacts('failed') }
always { collectArtifacts('always') }
}
} // pipeline
// EOF