| #!/usr/bin/env groovy |
| // ----------------------------------------------------------------------- |
| // Copyright 2021-2023 Open Networking Foundation (ONF) and the ONF Contributors |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // ----------------------------------------------------------------------- |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| String getIam(String func) { |
| // Cannot rely on a stack trace due to jenkins manipulation |
| String src = 'vars/volthaStackDeploy.groovy' |
| String iam = [src, func].join('::') |
| return iam |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Log progress message |
| // ----------------------------------------------------------------------- |
| void enter(String name) { |
| // Announce ourselves for log usability |
| String iam = getIam(name) |
| println("${iam}: ENTER") |
| return |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Log progress message |
| // ----------------------------------------------------------------------- |
| void leave(String name) { |
| // Announce ourselves for log usability |
| String iam = getIam(name) |
| println("${iam}: LEAVE") |
| return |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: |
| // ----------------------------------------------------------------------- |
| void deployVolthaStack(Map cfg) { |
| enter('deployVolthaStack') |
| |
| sh(label : "Create VOLTHA Stack ${cfg.stackName}, (namespace=${cfg.volthaNamespace})", |
| script : """ |
| |
| helm upgrade --install --create-namespace \ |
| -n ${cfg.volthaNamespace} ${cfg.stackName} ${cfg.volthaStackChart} \ |
| --set global.stack_name=${cfg.stackName} \ |
| --set global.voltha_infra_name=voltha-infra \ |
| --set voltha.onos_classic.replicas=${cfg.onosReplica} \ |
| --set global.voltha_infra_namespace=${cfg.infraNamespace} \ |
| ${cfg.extraHelmFlags} |
| """) |
| |
| for (int i = 0; i < cfg.bbsimReplica; i++) { |
| // NOTE we don't need to update the tag for DT |
| script { |
| sh(label : "Create config[$i]: bbsimCfg${cfg.stackId}${i}.yaml", |
| script : "rm -f $WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml", |
| ) |
| |
| if (cfg.workflow == 'att' || cfg.workflow == 'tt') { |
| int startingStag = 900 |
| def serviceConfigFile = cfg.workflow // type(?) String |
| if (cfg.withMacLearning && cfg.workflow == 'tt') { |
| serviceConfigFile = 'tt-maclearner' |
| } |
| // bbsimCfg: type(?) Map |
| def bbsimCfg = readYaml file: "$WORKSPACE/voltha-helm-charts/examples/${serviceConfigFile}-values.yaml" |
| // NOTE we assume that the only service that needs a different s_tag is the first one in the list |
| bbsimCfg['servicesConfig']['services'][0]['s_tag'] = startingStag + i |
| println "Using BBSim Service config ${bbsimCfg['servicesConfig']}" |
| writeYaml file: "$WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml", data: bbsimCfg |
| } else { |
| // NOTE if it's DT just copy the file over |
| sh(label : 'DT install', |
| script : """ |
| cp $WORKSPACE/voltha-helm-charts/examples/${cfg.workflow}-values.yaml \ |
| $WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml |
| """) |
| } // if (cfg) |
| } // script |
| |
| sh(label : "HELM: Create namespace=${cfg.volthaNamespace} bbsim${i}", |
| script : """ |
| helm upgrade --install --create-namespace -n ${cfg.volthaNamespace} bbsim${i} ${cfg.bbsimChart} \ |
| --set olt_id="${cfg.stackId}${i}" \ |
| -f $WORKSPACE/bbsimCfg${cfg.stackId}${i}.yaml \ |
| ${cfg.extraHelmFlags} |
| """) |
| } // for |
| |
| leave('deployVolthaStack') |
| return |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Wait until the pod completed, meaning ONOS fully deployed |
| // ----------------------------------------------------------------------- |
| // Todo: Move logic like this into a standalone script. |
| // Use jenkins stash or native JJB logic to publish out to nodes. |
| // ----------------------------------------------------------------------- |
| void launchVolthaStack(Map cfg) { |
| enter('launchVolthaStack') |
| |
| /* ----------------------------------------------------------------------- |
| * % kubectl get pods |
| 17:40:15 bbsim0-868479698c-z66mk 0/1 ContainerCreating 0 6s |
| 17:40:15 voltha-voltha-adapter-openolt-68c84bf786-z98rh 0/1 Running 0 8s |
| |
| * % kubectl port-forward --address 0.0.0.0 |
| 17:40:15 error: unable to forward port because pod is not running. Current status=Pending |
| * ----------------------------------------------------------------------- |
| */ |
| sh(label : "Wait for VOLTHA Stack (stack=${cfg.stackName}, namespace=${cfg.volthaNamespace}) to start", |
| script : """ |
| |
| cat <<EOM |
| |
| ** ----------------------------------------------------------------------- |
| ** Wait for VOLTHA Stack (stack=${cfg.stackName}, namespace=${cfg.volthaNamespace}) to start |
| ** ----------------------------------------------------------------------- |
| EOM |
| |
| # set -euo pipefail |
| set +x # # Logs are noisy when commented |
| |
| declare -i count=0 |
| declare -i debug=1 # uncomment to enable debugging |
| # declare -i verbose=1 # uncomment to enable debugging |
| vsd_log='volthaStackDeploy.tmp' |
| echo > \$vsd_log |
| |
| declare -i rc=0 # exit status |
| while true; do |
| |
| # Gather |
| kubectl get pods -n ${cfg.volthaNamespace} \ |
| -l app.kubernetes.io/part-of=voltha --no-headers \ |
| > \$vsd_log |
| |
| count=\$((\$count - 1)) |
| |
| # Display activity every iteration ? |
| [[ -v verbose ]] && { count=0; } |
| |
| # Display activity every minute or so {sleep(5) x count=10} |
| if [[ \$count -lt 1 ]]; then |
| count=10 |
| cat \$vsd_log |
| fi |
| |
| ## ----------------------- |
| ## Probe for cluster state |
| ## ----------------------- |
| if grep -q -e 'ContainerCreating' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: ContainerCrating active' |
| [[ -v debug ]] && grep -e 'ContainerCreating' \$vsd_log |
| |
| elif grep -q -e '0/' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: Waiting for status=Running' |
| [[ -v debug ]] && grep -e '0/' \$vsd_log |
| |
| elif ! grep -q '/' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: Waiting for initial pod activity' |
| [[ ! -v verbose ]] && { cat \$vsd_log; } |
| |
| # ----------------------------------------------------------------------- |
| # voltha-adapter-openolt-68c84bf786-8xsfc 0/1 CrashLoopBackOff 2 69s |
| # voltha-adapter-openolt-68c84bf786-8xsfc 0/1 Error 3 85s |
| # ----------------------------------------------------------------------- |
| elif grep -q 'Error' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: Detected cluster state=Error' |
| cat \$vsd_log |
| rc=1 # fatal |
| break |
| |
| # ----------------------------------------------------------------------- |
| # An extra conditon needed here but shell coding is tricky: |
| # "svc x/y Running 0 6s |
| # Verify (x == y) && (x > 0) |
| # Wait until job failure/we have an actual need for it. |
| # ----------------------------------------------------------------------- |
| # Could check for all services 'Running', is that reliable (?) |
| # ----------------------------------------------------------------------- |
| else |
| echo -e '\nvolthaStackDeploy.groovy: Voltha stack has launched' |
| [[ ! -v verbose ]] && { cat \$vsd_log; } |
| break |
| fi |
| |
| ## Support argument --timeout (?) |
| sleep 5 |
| |
| done |
| rm -f \$vsd_log |
| exit \$rc |
| """) |
| |
| leave('launchVolthaStack') |
| return |
| } |
| |
| // ----------------------------------------------------------------------- |
| // Intent: Wait until the pod completed, meaning ONOS fully deployed |
| // ----------------------------------------------------------------------- |
| void waitForOnosDeploy(Map cfg) { |
| enter('waitForOnosDeploy') |
| |
| sh(label : 'Wait for ONOS full deployment', |
| script : """ |
| |
| cat <<EOM |
| |
| ** ----------------------------------------------------------------------- |
| ** Wait for ONOS full deployment |
| ** ----------------------------------------------------------------------- |
| EOM |
| |
| # set -euo pipefail |
| set +x # # Noisy when commented (default: uncommented) |
| |
| declare -i count=0 |
| declare -i debug=1 # uncomment to enable debugging |
| # declare -i verbose=1 # uncomment to enable debugging |
| vsd_log='volthaStackDeploy.tmp' |
| echo > \$vsd_log |
| |
| declare -i rc=0 # exit status |
| while true; do |
| |
| # Gather -- should we check for count(svc > 1) ? |
| kubectl get pods -l app=onos-config-loader \ |
| -n ${cfg.infraNamespace} --no-headers \ |
| --field-selector=status.phase=Running \ |
| > \$vsd_log |
| |
| count=\$((\$count - 1)) |
| |
| # Display activity every iteration ? |
| [[ -v verbose ]] && { count=0; } |
| |
| # Display activity every minute or so {sleep(5) x count=10} |
| if [[ \$count -lt 1 ]]; then |
| count=10 |
| cat \$vsd_log |
| fi |
| |
| ## ----------------------- |
| ## Probe for cluster state |
| ## ----------------------- |
| if grep -q -e 'ContainerCreating' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: ContainerCrating active' |
| [[ -v debug ]] && grep -e 'ContainerCreating' \$vsd_log |
| |
| elif grep -q -e '0/' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: Waiting for status=Running' |
| [[ -v debug ]] && grep -e '0/' \$vsd_log |
| |
| elif ! grep -q '/' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: Waiting for initial pod activity' |
| [[ ! -v verbose ]] && { cat \$vsd_log; } |
| |
| # ----------------------------------------------------------------------- |
| # voltha-adapter-openolt-68c84bf786-8xsfc 0/1 CrashLoopBackOff 2 69s |
| # voltha-adapter-openolt-68c84bf786-8xsfc 0/1 Error 3 85s |
| # ----------------------------------------------------------------------- |
| elif grep -q 'Error' \$vsd_log; then |
| echo -e '\nvolthaStackDeploy.groovy: Detected cluster state=Error' |
| cat \$vsd_log |
| rc=1 # fatal |
| break |
| |
| # ----------------------------------------------------------------------- |
| # An extra conditon needed here but shell coding is tricky: |
| # "svc x/y Running 0 6s |
| # Verify (x == y) && (x > 0) |
| # Wait until job failure/we have an actual need for it. |
| # ----------------------------------------------------------------------- |
| # Could check for all services 'Running', is that reliable (?) |
| # ----------------------------------------------------------------------- |
| else |
| echo -e '\nvolthaStackDeploy.groovy: Voltha stack has launched' |
| [[ ! -v verbose ]] && { cat \$vsd_log; } |
| break |
| fi |
| |
| ## Support argument --timeout (?) |
| sleep 5 |
| |
| done |
| rm -f \$vsd_log |
| exit \$rc |
| """) |
| |
| leave('waitForOnosDeploy') |
| return |
| } |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| void process(Map config) { |
| enter('process') |
| |
| // note that I can't define this outside the function as there's no global scope in Groovy |
| Map defaultConfig = [ |
| bbsimReplica: 1, |
| infraNamespace: 'infra', |
| volthaNamespace: 'voltha', |
| stackName: 'voltha', |
| stackId: 1, // NOTE this is used to differentiate between BBSims across multiple stacks |
| workflow: 'att', |
| withMacLearning: false, |
| withFttb: false, |
| extraHelmFlags: '', |
| localCharts: false, |
| onosReplica: 1, |
| adaptersToWait: 2, |
| ] |
| |
| Map cfg = defaultConfig + config |
| |
| // Augment config map |
| cfg.volthaStackChart = 'onf/voltha-stack' |
| cfg.bbsimChart = 'onf/bbsim' |
| |
| if (cfg.localCharts) { |
| cfg.volthaStackChart = "$WORKSPACE/voltha-helm-charts/voltha-stack" |
| cfg.bbsimChart = "$WORKSPACE/voltha-helm-charts/bbsim" |
| |
| sh(label : 'HELM: Update voltha-stack deps', |
| script : """ |
| pushd $WORKSPACE/voltha-helm-charts/voltha-stack |
| helm dep update |
| popd |
| """) |
| } |
| |
| println "Deploying VOLTHA Stack with the following parameters: ${cfg}." |
| deployVolthaStack(cfg) |
| launchVolthaStack(cfg) |
| waitForAdapters(cfg) |
| waitForOnosDeploy(cfg) |
| leave('process') |
| |
| return |
| } |
| |
| // ----------------------------------------------------------------------- |
| // ----------------------------------------------------------------------- |
| def call(Map config=[:]) { // Function return type(?) |
| try { |
| enter('main') |
| process(config) |
| } |
| catch (Exception err) { // groovylint-disable-line CatchException |
| ans = false |
| println("** volthaStackDeploy.groovy: EXCEPTION ${err}") |
| throw err |
| } |
| finally { |
| leave('main') |
| } |
| return |
| } |
| |
| // [EOF] |