blob: 4a0a9d68b363e60b5898e5294ff1e9fe7aa0b78e [file] [log] [blame]
Matteo Scandolod82d1de2021-04-06 14:55:58 -07001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15// used to deploy VOLTHA and configure ONOS physical PODs
16
17// NOTE we are importing the library even if it's global so that it's
18// easier to change the keywords during a replay
19library identifier: 'cord-jenkins-libraries@master',
20 retriever: modernSCM([
21 $class: 'GitSCMSource',
22 remote: 'https://gerrit.opencord.org/ci-management.git'
23])
24
25def infraNamespace = "infra"
26def volthaNamespace = "voltha"
27
28pipeline {
29
30 /* no label, executor is determined by JJB */
31 agent {
32 label "${params.buildNode}"
33 }
34 options {
35 timeout(time: 35, unit: 'MINUTES')
36 }
37 environment {
38 PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
Matteo Scandolod43bb302021-04-20 10:19:29 -070039 KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
Matteo Scandolod82d1de2021-04-06 14:55:58 -070040 }
41
42 stages{
43 stage('Download Code') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070044 steps {
45 getVolthaCode([
46 branch: "${branch}",
47 volthaHelmChartsChange: "${volthaHelmChartsChange}",
48 ])
49 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070050 }
51 stage ("Parse deployment configuration file") {
Matteo Scandolod43bb302021-04-20 10:19:29 -070052 steps {
53 sh returnStdout: true, script: "rm -rf ${configBaseDir}"
54 sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
55 script {
56 if ( params.workFlow == "DT" ) {
57 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
58 }
59 else if ( params.workFlow == "TT" )
60 {
61 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
62 }
63 else
64 {
65 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
66 }
67 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070068 }
69 }
70 stage('Clean up') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070071 steps {
72 timeout(15) {
73 script {
74 helmTeardown(["default", infraNamespace, volthaNamespace])
75 }
76 timeout(1) {
77 sh returnStdout: false, script: '''
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070078 # remove orphaned port-forward from different namespaces
79 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
Matteo Scandolod43bb302021-04-20 10:19:29 -070080 '''
81 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070082 }
83 }
84 }
85 stage('Install Voltha') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070086 steps {
87 timeout(20) {
88 script {
89 // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
90 def localCharts = false
91 if (volthaHelmChartsChange != "") {
92 localCharts = true
93 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070094
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070095 // should the config file be suffixed with the workflow? see "deployment_config"
Matteo Scandolod43bb302021-04-20 10:19:29 -070096 def extraHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml "
Matteo Scandolod82d1de2021-04-06 14:55:58 -070097
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070098 if (workFlow.toLowerCase() == "dt") {
99 extraHelmFlags += " --set radius.enabled=false "
100 }
101 if (workFlow.toLowerCase() == "tt") {
102 extraHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
103 }
104
Matteo Scandolod43bb302021-04-20 10:19:29 -0700105 // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -0700106 extraHelmFlags = extraHelmFlags + " --set onos-classic.onosSshPort=30115 " +
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700107 "--set onos-classic.onosApiPort=30120 " +
108 "--set onos-classic.onosOfPort=31653 " +
109 "--set onos-classic.individualOpenFlowNodePorts=true "
110
Matteo Scandolod43bb302021-04-20 10:19:29 -0700111 volthaDeploy([
112 workflow: workFlow.toLowerCase(),
113 extraHelmFlags: extraHelmFlags,
114 localCharts: localCharts,
115 kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
116 onosReplica: params.NumOfOnos,
117 atomixReplica: params.NumOfAtomix,
118 // NOTE does this needs to be configured?
119 kafkaReplica: 3,
120 etcdReplica: 3,
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -0700121 bbsimReplica: 0,
Matteo Scandolod43bb302021-04-20 10:19:29 -0700122 ])
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700123 }
124 sh """
Matteo Scandolo79f133f2021-04-27 13:53:21 -0700125 JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
126 JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
127 JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
Matteo Scandolod43bb302021-04-20 10:19:29 -0700128 ps aux | grep port-forward
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700129 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700130 getPodsInfo("$WORKSPACE")
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700131 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700132 }
133 }
134 stage('Push Tech-Profile') {
135 steps {
136 script {
137 if ( params.configurePod && params.profile != "Default" ) {
138 for(int i=0; i < deployment_config.olts.size(); i++) {
139 def tech_prof_directory = "XGS-PON"
140 // If no debian package is specified we default to GPON for the ADTRAN OLT.
141 if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){
142 tech_prof_directory = "GPON"
143 }
144 timeout(1) {
145 sh returnStatus: true, script: """
146 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
147 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
148 if [[ "${workFlow}" == "TT" ]]; then
149 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
150 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
151 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
152 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
153 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST.json \$etcd_container:/tmp/mcast.json
154 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
155 else
156 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
157 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
158 fi
159 """
160 }
161 timeout(1) {
162 sh returnStatus: true, script: """
163 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
164 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
165 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
166 """
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700167 }
168 }
169 }
170 }
171 }
172 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700173 stage('Push MIB templates') {
174 steps {
175 sh """
176 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
177 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
178 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
179 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
180 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
181 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
182 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
183 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
184 """
185 }
186 }
187 stage('Push Sadis-config') {
188 steps {
189 timeout(1) {
190 sh returnStatus: true, script: """
191 if [[ "${workFlow}" == "DT" ]]; then
192 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
193 elif [[ "${workFlow}" == "TT" ]]; then
194 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
195 else
196 # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
197 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700198 fi
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700199 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700200 }
201 }
202 }
203 stage('Switch Configurations in ONOS') {
204 steps {
205 script {
206 if ( deployment_config.fabric_switches.size() > 0 ) {
207 timeout(1) {
208 def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
209 if (params.inBandManagement){
210 netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
211 }
212 sh """
213 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
214 curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700215 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700216 }
217 timeout(1) {
218 waitUntil {
219 sr_active_out = sh returnStatus: true, script: """
220 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
221 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
222 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
223 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
224 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
225 curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
226 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
227 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
228 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
229 """
230 return sr_active_out == 0
231 }
232 }
233 timeout(5) {
234 for(int i=0; i < deployment_config.hosts.src.size(); i++) {
235 for(int j=0; j < deployment_config.olts.size(); j++) {
236 def aggPort = -1
237 if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
238 aggPort = deployment_config.olts[j].aggPort
239 if(aggPort == -1){
240 throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
241 }
242 sh """
243 sleep 30 # NOTE why are we sleeping?
244 curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
245 """
246 }
247 }
248 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700249 }
250 }
251 }
252 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700253 }
254 stage('Reinstall OLT software') {
255 steps {
256 script {
257 if ( params.reinstallOlt ) {
258 for(int i=0; i < deployment_config.olts.size(); i++) {
259 // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
260 sh returnStdout: true, script: """
261 if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
262 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
263 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
264 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
265 fi
266 if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
267 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
268 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
269 fi
270 if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
271 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
272 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
273 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
274 fi
275 if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
276 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
277 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
278 fi
279 sleep 10
280 """
281 timeout(5) {
282 waitUntil {
283 olt_sw_present = sh returnStdout: true, script: """
284 if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
285 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
286 else
287 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
288 fi
289 if (${deployment_config.olts[i].fortygig}); then
290 if [[ "${params.inBandManagement}" == "true" ]]; then
291 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
292 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
293 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
294 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
295 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
296 fi
297 fi
298 """
299 return olt_sw_present.toInteger() > 0
300 }
301 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700302 }
303 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700304 }
305 }
306 }
307 stage('Restart OLT processes') {
308 steps {
309 script {
310 for(int i=0; i < deployment_config.olts.size(); i++) {
311 int waitTimerForOltUp = 360
312 if ( params.inBandManagement ) {
313 waitTimerForOltUp = 540
314 }
315 timeout(15) {
316 sh returnStdout: true, script: """
317 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
Andrea Campanellafdb8f3b2021-05-03 10:41:17 +0200318 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot -f > /dev/null &' || true
Matteo Scandolod43bb302021-04-20 10:19:29 -0700319 sleep ${waitTimerForOltUp}
320 """
321 }
322 timeout(15) {
323 waitUntil {
324 devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
325 return devprocess.toInteger() > 0
326 }
327 }
328 timeout(15) {
329 waitUntil {
330 openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
331 return openoltprocess.toInteger() > 0
332 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700333 }
334 }
335 }
336 }
337 }
338 }
339
340 post {
341 always {
342 archiveArtifacts artifacts: '*.txt'
343 }
344 }
345}