blob: 3dbd97a1e86901331297eea1d0363dde58555bee [file] [log] [blame]
Hardik Windlass6d9a82e2021-07-08 16:23:21 +00001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15// used to deploy VOLTHA and configure ONOS physical PODs
16
17// NOTE we are importing the library even if it's global so that it's
18// easier to change the keywords during a replay
19library identifier: 'cord-jenkins-libraries@master',
20 retriever: modernSCM([
21 $class: 'GitSCMSource',
22 remote: 'https://gerrit.opencord.org/ci-management.git'
23])
24
25def infraNamespace = "infra"
26def volthaNamespace = "voltha"
27
28pipeline {
29
30 /* no label, executor is determined by JJB */
31 agent {
32 label "${params.buildNode}"
33 }
34 options {
35 timeout(time: 35, unit: 'MINUTES')
36 }
37 environment {
38 PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
39 KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
40 }
41
42 stages{
43 stage('Download Code') {
44 steps {
45 getVolthaCode([
46 branch: "${branch}",
47 volthaSystemTestsChange: "${volthaSystemTestsChange}",
48 volthaHelmChartsChange: "${volthaHelmChartsChange}",
49 ])
50 }
51 }
52 stage ("Parse deployment configuration file") {
53 steps {
54 sh returnStdout: true, script: "rm -rf ${configBaseDir}"
Hardik Windlass6f854a12021-07-12 13:20:21 +000055 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
Hardik Windlass6d9a82e2021-07-08 16:23:21 +000056 script {
57 if ( params.workFlow == "DT" ) {
58 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
59 }
60 else if ( params.workFlow == "TT" )
61 {
62 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
63 }
64 else
65 {
66 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
67 }
68 }
69 }
70 }
71 stage('Clean up') {
72 steps {
73 timeout(15) {
74 script {
75 helmTeardown(["default", infraNamespace, volthaNamespace])
76 }
77 timeout(1) {
78 sh returnStdout: false, script: '''
79 # remove orphaned port-forward from different namespaces
80 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
81 '''
82 }
83 }
84 }
85 }
86 stage('Install Voltha') {
87 steps {
88 timeout(20) {
89 script {
90 // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
91 def localCharts = false
92 if (volthaHelmChartsChange != "" || branch != "master") {
93 localCharts = true
94 }
95
96 // should the config file be suffixed with the workflow? see "deployment_config"
97 def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
98
99 if (workFlow.toLowerCase() == "dt") {
100 localHelmFlags += " --set radius.enabled=false "
101 }
102 if (workFlow.toLowerCase() == "tt") {
103 localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
104 if (enableMultiUni.toBoolean()) {
105 localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} "
106 }
107 }
108
109 // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
110 // and to connect the ofagent to all instances of ONOS
111 localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
112 "--set onos-classic.onosApiPort=30120 " +
113 "--set onos-classic.onosOfPort=31653 " +
114 "--set onos-classic.individualOpenFlowNodePorts=true " +
115 "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
116
117 if (bbsimReplicas.toInteger() != 0) {
118 localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
119 }
120
121 // adding user specified helm flags at the end so they'll have priority over everything else
122 localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
123
124 volthaDeploy([
125 workflow: workFlow.toLowerCase(),
126 extraHelmFlags: localHelmFlags,
127 localCharts: localCharts,
128 kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
129 onosReplica: params.NumOfOnos,
130 atomixReplica: params.NumOfAtomix,
131 kafkaReplica: params.NumOfKafka,
132 etcdReplica: params.NumOfEtcd,
133 bbsimReplica: bbsimReplicas.toInteger(),
134 ])
135 }
136 sh """
137 JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
138 JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
139 JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
140 ps aux | grep port-forward
141 """
142 getPodsInfo("$WORKSPACE")
143 }
144 }
145 }
146 stage('Push Tech-Profile') {
147 steps {
148 script {
149 if ( params.configurePod && params.profile != "Default" ) {
150 for(int i=0; i < deployment_config.olts.size(); i++) {
151 def tech_prof_directory = "XGS-PON"
152 // If no debian package is specified we default to GPON for the ADTRAN OLT.
153 if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){
154 tech_prof_directory = "GPON"
155 }
156 timeout(1) {
157 sh returnStatus: true, script: """
158 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
159 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
160 if [[ "${workFlow}" == "TT" ]]; then
161 if [[ "${params.enableMultiUni}" == "true" ]]; then
162 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-HSIA.json \$etcd_container:/tmp/hsia.json
163 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
164 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-VoIP.json \$etcd_container:/tmp/voip.json
165 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
166 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
167 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
168 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
169 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
170 else
171 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
172 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
173 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
174 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
175 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
176 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
177 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
178 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
179 fi
180 else
181 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
182 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
183 fi
184 """
185 }
186 timeout(1) {
187 sh returnStatus: true, script: """
188 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
189 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
190 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
191 """
192 }
193 }
194 }
195 }
196 }
197 }
198 stage('Push MIB templates') {
199 steps {
200 sh """
201 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
202 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
203 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
204 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
205 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
206 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
207 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
208 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
209 """
210 }
211 }
212 stage('Push Sadis-config') {
213 steps {
214 timeout(1) {
215 sh returnStatus: true, script: """
216 if [[ "${workFlow}" == "DT" ]]; then
217 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
218 elif [[ "${workFlow}" == "TT" ]]; then
219 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
220 else
221 # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
222 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
223 fi
224 """
225 }
226 }
227 }
228 stage('Switch Configurations in ONOS') {
229 steps {
230 script {
231 if ( deployment_config.fabric_switches.size() > 0 ) {
232 timeout(1) {
233 def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
234 if (params.inBandManagement){
235 netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
236 }
237 sh """
238 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
239 curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
240 """
241 }
242 timeout(1) {
243 waitUntil {
244 sr_active_out = sh returnStatus: true, script: """
245 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
246 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
247 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
248 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
249 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
250 curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
251 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
252 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
253 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
254 """
255 return sr_active_out == 0
256 }
257 }
258 timeout(7) {
259 for(int i=0; i < deployment_config.hosts.src.size(); i++) {
260 for(int j=0; j < deployment_config.olts.size(); j++) {
261 def aggPort = -1
262 if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
263 aggPort = deployment_config.olts[j].aggPort
264 if(aggPort == -1){
265 throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
266 }
267 sh """
268 sleep 30 # NOTE why are we sleeping?
269 curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
270 """
271 }
272 }
273 }
274 }
275 }
276 }
277 }
278 }
279 stage('Reinstall OLT software') {
280 steps {
281 script {
282 if ( params.reinstallOlt ) {
283 for(int i=0; i < deployment_config.olts.size(); i++) {
284 // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
285 sh returnStdout: true, script: """
Hardik Windlass6cdbfa22021-07-13 06:21:35 +0000286 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
287 if [ "${params.inBandManagement}" == "true" ]; then
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000288 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000289 fi
Hardik Windlass6cdbfa22021-07-13 06:21:35 +0000290 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
Hardik Windlass6d9a82e2021-07-08 16:23:21 +0000291 sleep 10
292 """
293 timeout(5) {
294 waitUntil {
295 olt_sw_present = sh returnStdout: true, script: """
296 if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
297 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
298 else
299 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
300 fi
301 if (${deployment_config.olts[i].fortygig}); then
302 if [[ "${params.inBandManagement}" == "true" ]]; then
303 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
304 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
305 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
306 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
307 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
308 fi
309 fi
310 """
311 return olt_sw_present.toInteger() > 0
312 }
313 }
314 }
315 }
316 }
317 }
318 }
319 stage('Restart OLT processes') {
320 steps {
321 script {
322 for(int i=0; i < deployment_config.olts.size(); i++) {
323 int waitTimerForOltUp = 360
324 if ( params.inBandManagement ) {
325 waitTimerForOltUp = 540
326 }
327 timeout(15) {
328 sh returnStdout: true, script: """
329 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
330 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
331 sleep ${waitTimerForOltUp}
332 """
333 }
334 timeout(15) {
335 waitUntil {
336 devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
337 return devprocess.toInteger() > 0
338 }
339 }
340 timeout(15) {
341 waitUntil {
342 openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
343 return openoltprocess.toInteger() > 0
344 }
345 }
346 }
347 }
348 }
349 }
350 }
351
352 post {
353 aborted {
354 getPodsInfo("$WORKSPACE/failed")
355 sh """
356 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true
357 """
358 archiveArtifacts artifacts: '**/*.log,**/*.txt'
359 }
360 failure {
361 getPodsInfo("$WORKSPACE/failed")
362 sh """
363 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true
364 """
365 archiveArtifacts artifacts: '**/*.log,**/*.txt'
366 }
367 always {
368 archiveArtifacts artifacts: '*.txt'
369 }
370 }
371}