blob: 6dd5a95bc87ce2178fc37124d74443239b986419 [file] [log] [blame]
Matteo Scandoloe43b5f82019-09-23 15:21:04 -07001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15// voltha-2.x e2e tests
16// uses kind-voltha to deploy voltha-2.X
17// uses bbsim to simulate OLT/ONUs
18
19pipeline {
20
21 /* no label, executor is determined by JJB */
22 agent {
23 label "${params.executorNode}"
24 }
25 options {
26 timeout(time: 40, unit: 'MINUTES')
27 }
28
29 stages {
30
31 stage('Download kind-voltha') {
32 steps {
33 sh """
Matteo Scandoloa61c6d62019-09-23 17:17:27 -070034 rm -rf kind-voltha
Matteo Scandoloe43b5f82019-09-23 15:21:04 -070035 git clone https://github.com/ciena/kind-voltha.git
36 """
37 }
38 }
39
40 stage('Deploy Voltha') {
41 steps {
42 sh """
43 cd kind-voltha/
44 EXTRA_HELM_FLAGS="${params.extraHelmFlags}" VOLTHA_LOG_LEVEL=DEBUG TYPE=minimal WITH_RADIUS=y WITH_BBSIM=n INSTALL_ONOS_APPS=y CONFIG_SADIS=y FANCY=0 ./voltha up
45 """
46 }
47 }
48
Matteo Scandoloa61c6d62019-09-23 17:17:27 -070049 stage('Download BBSim repo') {
Matteo Scandoloe43b5f82019-09-23 15:21:04 -070050 steps {
51 sh """
52 cd $WORKSPACE
Matteo Scandoloa61c6d62019-09-23 17:17:27 -070053 rm -rf bbsim
Matteo Scandoloe43b5f82019-09-23 15:21:04 -070054 git clone https://github.com/opencord/bbsim.git bbsim
Matteo Scandoloa61c6d62019-09-23 17:17:27 -070055 """
56 }
57 }
58
59 stage('config ONOS with BBSim sadis values') {
60 steps {
61 sh """
62 cd $WORKSPACE/bbsim
Matteo Scandoloe43b5f82019-09-23 15:21:04 -070063 curl --user karaf:karaf -X POST --header 'Content-Type: application/json' --header 'Accept: application/json' -d @examples/sadis-minimal.json http://127.0.0.1:8181/onos/v1/network/configuration/apps
64 curl --user karaf:karaf -X POST --header 'Content-Type: application/json' --header 'Accept: application/json' -d @examples/onos-dhcp.json http://127.0.0.1:8181/onos/v1/network/configuration/apps
Matteo Scandoloe43b5f82019-09-23 15:21:04 -070065 """
66 }
67 }
68
Matteo Scandoloa61c6d62019-09-23 17:17:27 -070069 stage('Build and Deploy BBSim') {
70 // This step doing multple things as it is (hopefully) a temporary step
71 // once the new-bbsim is integrated with kind-voltha this all pipeline should be dismissed
72 steps {
73 sh '''
74 cd $WORKSPACE/kind-voltha/
75 export KUBECONFIG="$(./bin/kind get kubeconfig-path --name="voltha-minimal")"
76 export VOLTCONFIG="/home/jenkins/.volt/config-minimal"
77 export PATH=$WORKSPACE/kind-voltha/bin:$PATH
78 cd $WORKSPACE/bbsim
79 # DOCKER_TAG=candidate make docker-build
80 # TYPE=minimal kind load docker-image voltha/bbsim:candidate --name voltha-\$TYPE --nodes voltha-\$TYPE-worker,voltha-\$TYPE-worker2;
81 # helm install -n bbsim deployments/helm-chart/bbsim/ --set images.bbsim.tag=candidate --set images.bbsim.pullPolicy=IfNotProsent
82 helm install -n bbsim deployments/helm-chart/bbsim/ --set images.bbsim.tag=master
83 '''
84 }
85 }
86
Matteo Scandoloe43b5f82019-09-23 15:21:04 -070087 stage('Run E2E Tests') {
88 steps {
89 sh '''
90 git clone https://gerrit.opencord.org/voltha-system-tests
91 cd kind-voltha/
92 export KUBECONFIG="$(./bin/kind get kubeconfig-path --name="voltha-minimal")"
93 export VOLTCONFIG="/home/jenkins/.volt/config-minimal"
94 export PATH=$WORKSPACE/kind-voltha/bin:$PATH
95 cd $WORKSPACE/voltha-system-tests/tests/sanity
96 robot -v ONOS_REST_PORT:8181 -v ONOS_SSH_PORT:8101 -e notready --critical sanity -v num_onus:1 -v BBSIM_IP:bbsim-olt-id-0 -v BBSIM_OLT_SN:BBSIM_OLT_0 -b BBSIM_ONU_SN:BBSM00000001 sanity.robot || true
97 '''
98 }
99 }
100 }
101
102 post {
103 always {
104 sh '''
105 # copy robot logs
106 if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs
107 cp -r $WORKSPACE/voltha-system-tests/tests/sanity/*ml ./RobotLogs || true
108 cd kind-voltha/
109 cp install-minimal.log $WORKSPACE/
110 export KUBECONFIG="$(./bin/kind get kubeconfig-path --name="voltha-minimal")"
111 export VOLTCONFIG="/home/jenkins/.volt/config-minimal"
112 export PATH=$WORKSPACE/kind-voltha/bin:$PATH
113 kubectl get pods --all-namespaces -o jsonpath="{..image}" |tr -s "[[:space:]]" "\n" | sort | uniq -c
114 kubectl get nodes -o wide
115 kubectl get pods -o wide
116 kubectl get pods -n voltha -o wide
117 ## get default pod logs
118 for pod in \$(kubectl get pods --no-headers | awk '{print \$1}');
119 do
120 if [[ \$pod == *"onos"* && \$pod != *"onos-service"* ]]; then
121 kubectl logs \$pod onos> $WORKSPACE/\$pod.log;
122 else
123 kubectl logs \$pod> $WORKSPACE/\$pod.log;
124 fi
125 done
126 ## get voltha pod logs
127 for pod in \$(kubectl get pods --no-headers -n voltha | awk '{print \$1}');
128 do
129 if [[ \$pod == *"-api-"* ]]; then
130 kubectl logs \$pod arouter -n voltha > $WORKSPACE/\$pod.log;
131 else
132 kubectl logs \$pod -n voltha > $WORKSPACE/\$pod.log;
133 fi
134 done
135 ## clean up node
136 WAIT_ON_DOWN=y ./voltha down
137 cd $WORKSPACE/
138 rm -rf kind-voltha/ voltha-system-tests/ || true
139 '''
140 step([$class: 'RobotPublisher',
141 disableArchiveOutput: false,
142 logFileName: 'RobotLogs/log*.html',
143 otherFiles: '',
144 outputFileName: 'RobotLogs/output*.xml',
145 outputPath: '.',
146 passThreshold: 80,
147 reportFileName: 'RobotLogs/report*.html',
148 unstableThreshold: 0]);
149 archiveArtifacts artifacts: '*.log'
150
151 }
152 }
153}