blob: 1b66c03a56416413b04c7ec14264d0173985b95b [file] [log] [blame]
Matteo Scandolod82d1de2021-04-06 14:55:58 -07001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15// used to deploy VOLTHA and configure ONOS physical PODs
16
17// NOTE we are importing the library even if it's global so that it's
18// easier to change the keywords during a replay
19library identifier: 'cord-jenkins-libraries@master',
20 retriever: modernSCM([
21 $class: 'GitSCMSource',
22 remote: 'https://gerrit.opencord.org/ci-management.git'
23])
24
25def infraNamespace = "infra"
26def volthaNamespace = "voltha"
27
28pipeline {
29
30 /* no label, executor is determined by JJB */
31 agent {
32 label "${params.buildNode}"
33 }
34 options {
35 timeout(time: 35, unit: 'MINUTES')
36 }
37 environment {
38 PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
Matteo Scandolod43bb302021-04-20 10:19:29 -070039 KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
Matteo Scandolod82d1de2021-04-06 14:55:58 -070040 }
41
42 stages{
43 stage('Download Code') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070044 steps {
45 getVolthaCode([
46 branch: "${branch}",
47 volthaHelmChartsChange: "${volthaHelmChartsChange}",
48 ])
49 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070050 }
51 stage ("Parse deployment configuration file") {
Matteo Scandolod43bb302021-04-20 10:19:29 -070052 steps {
53 sh returnStdout: true, script: "rm -rf ${configBaseDir}"
54 sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
55 script {
56 if ( params.workFlow == "DT" ) {
57 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
58 }
59 else if ( params.workFlow == "TT" )
60 {
61 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
62 }
63 else
64 {
65 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
66 }
67 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070068 }
69 }
70 stage('Clean up') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070071 steps {
72 timeout(15) {
73 script {
74 helmTeardown(["default", infraNamespace, volthaNamespace])
75 }
76 timeout(1) {
77 sh returnStdout: false, script: '''
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070078 # remove orphaned port-forward from different namespaces
Andrea Campanella4c8af942021-05-12 10:12:13 +020079 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
Matteo Scandolod43bb302021-04-20 10:19:29 -070080 '''
81 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070082 }
83 }
84 }
85 stage('Install Voltha') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070086 steps {
87 timeout(20) {
88 script {
89 // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
90 def localCharts = false
91 if (volthaHelmChartsChange != "") {
92 localCharts = true
93 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070094
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070095 // should the config file be suffixed with the workflow? see "deployment_config"
Matteo Scandolo6ddb0152021-05-07 11:25:17 -070096 def extraHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
Matteo Scandolod82d1de2021-04-06 14:55:58 -070097
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070098 if (workFlow.toLowerCase() == "dt") {
99 extraHelmFlags += " --set radius.enabled=false "
100 }
101 if (workFlow.toLowerCase() == "tt") {
102 extraHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
103 }
104
Matteo Scandolod43bb302021-04-20 10:19:29 -0700105 // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -0700106 extraHelmFlags = extraHelmFlags + " --set onos-classic.onosSshPort=30115 " +
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700107 "--set onos-classic.onosApiPort=30120 " +
108 "--set onos-classic.onosOfPort=31653 " +
109 "--set onos-classic.individualOpenFlowNodePorts=true "
110
Hardik Windlassc7379022021-05-12 13:52:24 +0530111 def bbsimReplica = 0
Matteo Scandolo1c895512021-05-13 10:30:13 -0700112 if (installBBSim.toBoolean()) {
Hardik Windlassc7379022021-05-12 13:52:24 +0530113 bbsimReplica = 1
114 extraHelmFlags = extraHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
115 }
116
Matteo Scandolod43bb302021-04-20 10:19:29 -0700117 volthaDeploy([
118 workflow: workFlow.toLowerCase(),
119 extraHelmFlags: extraHelmFlags,
120 localCharts: localCharts,
121 kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
122 onosReplica: params.NumOfOnos,
123 atomixReplica: params.NumOfAtomix,
Hardik Windlassc7379022021-05-12 13:52:24 +0530124 kafkaReplica: params.NumOfKafka,
Hardik Windlass1685e5b2021-05-13 14:07:44 +0530125 etcdReplica: params.NumOfEtcd,
Hardik Windlassc7379022021-05-12 13:52:24 +0530126 bbsimReplica: bbsimReplica.toInteger(),
Matteo Scandolod43bb302021-04-20 10:19:29 -0700127 ])
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700128 }
129 sh """
Matteo Scandolo79f133f2021-04-27 13:53:21 -0700130 JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
131 JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
132 JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
Matteo Scandolod43bb302021-04-20 10:19:29 -0700133 ps aux | grep port-forward
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700134 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700135 getPodsInfo("$WORKSPACE")
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700136 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700137 }
138 }
139 stage('Push Tech-Profile') {
140 steps {
141 script {
142 if ( params.configurePod && params.profile != "Default" ) {
143 for(int i=0; i < deployment_config.olts.size(); i++) {
144 def tech_prof_directory = "XGS-PON"
145 // If no debian package is specified we default to GPON for the ADTRAN OLT.
146 if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){
147 tech_prof_directory = "GPON"
148 }
149 timeout(1) {
150 sh returnStatus: true, script: """
151 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
152 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
153 if [[ "${workFlow}" == "TT" ]]; then
154 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
155 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
156 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
157 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
Hardik Windlassfc2cdcb2021-05-18 08:38:06 +0000158 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
159 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
160 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
161 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
Matteo Scandolod43bb302021-04-20 10:19:29 -0700162 else
163 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
164 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
165 fi
166 """
167 }
168 timeout(1) {
169 sh returnStatus: true, script: """
170 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
171 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
172 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
173 """
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700174 }
175 }
176 }
177 }
178 }
179 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700180 stage('Push MIB templates') {
181 steps {
182 sh """
183 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
184 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
185 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
186 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
187 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
188 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
189 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
190 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
191 """
192 }
193 }
194 stage('Push Sadis-config') {
195 steps {
196 timeout(1) {
197 sh returnStatus: true, script: """
198 if [[ "${workFlow}" == "DT" ]]; then
199 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
200 elif [[ "${workFlow}" == "TT" ]]; then
201 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
202 else
203 # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
204 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700205 fi
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700206 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700207 }
208 }
209 }
210 stage('Switch Configurations in ONOS') {
211 steps {
212 script {
213 if ( deployment_config.fabric_switches.size() > 0 ) {
214 timeout(1) {
215 def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
216 if (params.inBandManagement){
217 netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
218 }
219 sh """
220 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
221 curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700222 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700223 }
224 timeout(1) {
225 waitUntil {
226 sr_active_out = sh returnStatus: true, script: """
227 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
228 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
229 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
230 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
231 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
232 curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
233 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
234 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
235 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
236 """
237 return sr_active_out == 0
238 }
239 }
240 timeout(5) {
241 for(int i=0; i < deployment_config.hosts.src.size(); i++) {
242 for(int j=0; j < deployment_config.olts.size(); j++) {
243 def aggPort = -1
244 if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
245 aggPort = deployment_config.olts[j].aggPort
246 if(aggPort == -1){
247 throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
248 }
249 sh """
250 sleep 30 # NOTE why are we sleeping?
251 curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
252 """
253 }
254 }
255 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700256 }
257 }
258 }
259 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700260 }
261 stage('Reinstall OLT software') {
262 steps {
263 script {
264 if ( params.reinstallOlt ) {
265 for(int i=0; i < deployment_config.olts.size(); i++) {
266 // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
267 sh returnStdout: true, script: """
268 if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
269 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
270 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
271 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
272 fi
273 if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
274 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
275 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
276 fi
277 if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
278 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
279 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
280 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
281 fi
282 if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
283 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
284 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
285 fi
286 sleep 10
287 """
288 timeout(5) {
289 waitUntil {
290 olt_sw_present = sh returnStdout: true, script: """
291 if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
292 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
293 else
294 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
295 fi
296 if (${deployment_config.olts[i].fortygig}); then
297 if [[ "${params.inBandManagement}" == "true" ]]; then
298 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
299 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
300 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
301 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
302 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
303 fi
304 fi
305 """
306 return olt_sw_present.toInteger() > 0
307 }
308 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700309 }
310 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700311 }
312 }
313 }
314 stage('Restart OLT processes') {
315 steps {
316 script {
317 for(int i=0; i < deployment_config.olts.size(); i++) {
318 int waitTimerForOltUp = 360
319 if ( params.inBandManagement ) {
320 waitTimerForOltUp = 540
321 }
322 timeout(15) {
323 sh returnStdout: true, script: """
324 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
Andrea Campanellafdb8f3b2021-05-03 10:41:17 +0200325 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot -f > /dev/null &' || true
Matteo Scandolod43bb302021-04-20 10:19:29 -0700326 sleep ${waitTimerForOltUp}
327 """
328 }
329 timeout(15) {
330 waitUntil {
331 devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
332 return devprocess.toInteger() > 0
333 }
334 }
335 timeout(15) {
336 waitUntil {
337 openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
338 return openoltprocess.toInteger() > 0
339 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700340 }
341 }
342 }
343 }
344 }
345 }
346
347 post {
Matteo Scandolo0da60532021-05-06 08:59:42 -0700348 aborted {
349 getPodsInfo("$WORKSPACE/failed")
350 sh """
351 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true
352 """
353 archiveArtifacts artifacts: '**/*.log,**/*.txt'
354 }
355 failure {
356 getPodsInfo("$WORKSPACE/failed")
357 sh """
358 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true
359 """
360 archiveArtifacts artifacts: '**/*.log,**/*.txt'
361 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700362 always {
363 archiveArtifacts artifacts: '*.txt'
364 }
365 }
366}