blob: 818e24d2184be75dbb3acfdec9394c200b50ca48 [file] [log] [blame]
Matteo Scandolofbcbdb82020-05-06 15:41:32 -07001// Copyright 2019-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
Matteo Scandolo39c531a2021-01-22 16:05:32 -080015// deploy VOLTHA and performs a scale test
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070016
Matteo Scandolobaf74892021-04-02 11:03:51 -070017library identifier: 'cord-jenkins-libraries@master',
18 retriever: modernSCM([
19 $class: 'GitSCMSource',
20 remote: 'https://gerrit.opencord.org/ci-management.git'
21])
22
Matteo Scandolo0e8c23a2021-03-26 11:21:54 -070023// this function generates the correct parameters for ofAgent
24// to connect to multple ONOS instances
25def ofAgentConnections(numOfOnos, releaseName, namespace) {
26 def params = " "
27 numOfOnos.times {
28 params += "--set voltha.services.controller[${it}].address=${releaseName}-onos-classic-${it}.${releaseName}-onos-classic-hs.${namespace}.svc:6653 "
29 }
30 return params
31}
32
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070033pipeline {
34
35 /* no label, executor is determined by JJB */
36 agent {
37 label "${params.buildNode}"
38 }
39 options {
Andrea Campanellac68b8d72020-09-24 11:25:47 +020040 timeout(time: 60, unit: 'MINUTES')
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070041 }
42 environment {
Matteo Scandoloc3dea532020-06-04 10:46:49 -070043 JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070044 KUBECONFIG="$HOME/.kube/config"
45 VOLTCONFIG="$HOME/.volt/config"
Matteo Scandolob70b3e02020-05-07 11:50:26 -070046 SSHPASS="karaf"
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070047 VOLTHA_LOG_LEVEL="${logLevel}"
48 NUM_OF_BBSIM="${olts}"
Matteo Scandolo0430f672020-05-07 11:50:26 -070049 NUM_OF_OPENONU="${openonuAdapterReplicas}"
50 NUM_OF_ONOS="${onosReplicas}"
51 NUM_OF_ATOMIX="${atomixReplicas}"
Matteo Scandolod3247ae2021-04-07 12:55:55 -070052 EXTRA_HELM_FLAGS=" "
Matteo Scandolo7d6695c2020-08-25 13:13:16 -070053
Matteo Scandoloecc7c7f2021-03-16 09:34:45 -070054 APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader"
Matteo Scandolof54c9b32020-08-27 07:58:27 -070055 LOG_FOLDER="$WORKSPACE/logs"
Matteo Scandolo5f72f522020-11-02 17:59:44 -080056
57 GERRIT_PROJECT="${GERRIT_PROJECT}"
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070058 }
59
60 stages {
61 stage ('Cleanup') {
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070062 steps {
Matteo Scandoloa731f8f2020-05-11 10:27:26 -070063 timeout(time: 11, unit: 'MINUTES') {
Matteo Scandolobaf74892021-04-02 11:03:51 -070064 script {
65 helmTeardown(["default"])
66 }
Matteo Scandolo39c531a2021-01-22 16:05:32 -080067 sh returnStdout: false, script: '''
Matteo Scandolod2e2a0d2020-06-10 18:02:03 -070068 helm repo add onf https://charts.opencord.org
Matteo Scandolod2e2a0d2020-06-10 18:02:03 -070069 helm repo update
70
Matteo Scandolod4064492020-11-13 10:48:30 -080071 # remove orphaned port-forward from different namespaces
Matteo Scandolo39c531a2021-01-22 16:05:32 -080072 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
Matteo Scandolod4064492020-11-13 10:48:30 -080073
Matteo Scandoloa731f8f2020-05-11 10:27:26 -070074 cd $WORKSPACE
75 rm -rf $WORKSPACE/*
Matteo Scandolo39c531a2021-01-22 16:05:32 -080076 '''
Matteo Scandolo3f2e4152020-09-22 15:55:27 -070077 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070078 }
79 }
80 stage('Clone voltha-system-tests') {
81 steps {
82 checkout([
83 $class: 'GitSCM',
Matteo Scandolo9aae4952020-09-14 13:05:53 -070084 userRemoteConfigs: [[
85 url: "https://gerrit.opencord.org/voltha-system-tests",
Matteo Scandoloa42c6f52020-09-19 01:35:12 +000086 refspec: "${volthaSystemTestsChange}"
Matteo Scandolo9aae4952020-09-14 13:05:53 -070087 ]],
Matteo Scandolod43064b2020-07-13 17:18:45 -070088 branches: [[ name: "${release}", ]],
Matteo Scandolofbcbdb82020-05-06 15:41:32 -070089 extensions: [
90 [$class: 'WipeWorkspace'],
91 [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
92 [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
93 ],
94 ])
Matteo Scandolo3f2e4152020-09-22 15:55:27 -070095 script {
96 sh(script:"""
97 if [ '${volthaSystemTestsChange}' != '' ] ; then
98 cd $WORKSPACE/voltha-system-tests;
99 git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
100 fi
101 """)
102 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700103 }
104 }
Matteo Scandolo11311742021-01-25 13:56:22 -0800105 stage('Clone voltha-helm-charts') {
106 steps {
107 checkout([
108 $class: 'GitSCM',
109 userRemoteConfigs: [[
110 url: "https://gerrit.opencord.org/voltha-helm-charts",
111 refspec: "${volthaHelmChartsChange}"
112 ]],
113 branches: [[ name: "master", ]],
114 extensions: [
115 [$class: 'WipeWorkspace'],
116 [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-helm-charts"],
117 [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
118 ],
119 ])
120 script {
121 sh(script:"""
122 if [ '${volthaHelmChartsChange}' != '' ] ; then
123 cd $WORKSPACE/voltha-helm-charts;
124 git fetch https://gerrit.opencord.org/voltha-helm-charts ${volthaHelmChartsChange} && git checkout FETCH_HEAD
125 fi
126 """)
127 }
128 }
129 }
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700130 stage('Build patch') {
131 when {
132 expression {
Matteo Scandolo65f80bf2020-11-03 10:57:03 -0800133 return params.GERRIT_PROJECT
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700134 }
135 }
136 steps {
137 sh """
Matteo Scandolo5f72f522020-11-02 17:59:44 -0800138 git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
139 cd \$GERRIT_PROJECT
140 git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700141
142 DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
143 DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
144 """
145 }
146 }
Matteo Scandolo0430f672020-05-07 11:50:26 -0700147 stage('Deploy common infrastructure') {
Matteo Scandoloa8afe122020-05-11 10:45:56 -0700148 // includes monitoring, kafka, etcd
Matteo Scandolo0430f672020-05-07 11:50:26 -0700149 steps {
150 sh '''
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800151 helm install kafka $HOME/teone/helm-charts/kafka --set replicaCount=${kafkaReplicas},replicas=${kafkaReplicas} --set persistence.enabled=false \
Matteo Scandolo070ded82020-11-02 12:54:05 -0800152 --set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false \
153 --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default
Matteo Scandolo0430f672020-05-07 11:50:26 -0700154
Matteo Scandolocb580f62020-06-12 12:55:07 -0700155 # the ETCD chart use "auth" for resons different than BBsim, so strip that away
156 ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g'
Matteo Scandolo70a1aa82020-11-10 14:04:59 -0800157 ETCD_FLAGS+=" --set auth.rbac.enabled=false,persistence.enabled=false,statefulset.replicaCount=${etcdReplicas}"
Matteo Scandoloccc06192020-06-22 10:16:17 -0700158 ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800159 helm install --set replicas=${etcdReplicas} etcd $HOME/teone/helm-charts/etcd $ETCD_FLAGS
Matteo Scandoloa8afe122020-05-11 10:45:56 -0700160
Matteo Scandolo0430f672020-05-07 11:50:26 -0700161 if [ ${withMonitoring} = true ] ; then
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800162 helm install nem-monitoring onf/nem-monitoring \
Matteo Scandolo8f185c32020-07-16 16:30:04 -0700163 -f $HOME/voltha-scale/grafana.yaml \
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700164 --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
165 --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
Matteo Scandolo0430f672020-05-07 11:50:26 -0700166 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700167 '''
168 }
169 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700170 stage('Deploy Voltha') {
171 steps {
Matteo Scandolob2de2032021-02-26 10:04:02 -0800172 timeout(time: 10, unit: 'MINUTES') {
173 script {
Matteo Scandolo064efbc2021-03-29 17:24:34 -0700174 sh returnStdout: false, script: '''
175 # start logging with kail
176
177 mkdir -p $LOG_FOLDER
178
179 list=($APPS_TO_LOG)
180 for app in "${list[@]}"
181 do
182 echo "Starting logs for: ${app}"
183 _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
184 done
185 '''
Andrea Campanella238bd362021-04-07 12:30:15 +0200186 def returned_flags = sh (returnStdout: true, script: """
Matteo Scandolod43064b2020-07-13 17:18:45 -0700187
Matteo Scandolob2de2032021-02-26 10:04:02 -0800188 export EXTRA_HELM_FLAGS+=' '
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700189
Matteo Scandolob2de2032021-02-26 10:04:02 -0800190 # BBSim custom image handling
191 if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
192 IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
193 EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
194 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700195
Matteo Scandolob2de2032021-02-26 10:04:02 -0800196 # VOLTHA custom image handling
197 if [ '${rwCoreImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
198 IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
199 EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=\$rwCoreRepo,voltha.images.rw_core.tag=\$rwCoreTag "
200 fi
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800201
Matteo Scandolob2de2032021-02-26 10:04:02 -0800202 # ofAgent custom image handling
203 if [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'of-agent' ]; then
204 IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
205 EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=\$ofAgentRepo,voltha.images.ofagent.tag=\$ofAgentTag "
206 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700207
Matteo Scandolob2de2032021-02-26 10:04:02 -0800208 # OpenOLT custom image handling
209 if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
210 IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
211 EXTRA_HELM_FLAGS+="--set voltha-adapter-openolt.images.adapter_open_olt.repository=\$openoltAdapterRepo,voltha-adapter-openolt.images.adapter_open_olt.tag=\$openoltAdapterTag "
212 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700213
Matteo Scandolob2de2032021-02-26 10:04:02 -0800214 # OpenONU custom image handling
215 if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
216 IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
217 EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu.repository=\$openonuAdapterRepo,voltha-adapter-openonu.images.adapter_open_onu.tag=\$openonuAdapterTag "
218 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700219
Matteo Scandolob2de2032021-02-26 10:04:02 -0800220 # OpenONU GO custom image handling
221 if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
222 IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
223 EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,voltha-adapter-openonu.images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
224 fi
Andrea Campanella28763082020-11-18 10:55:31 +0100225
Matteo Scandolob2de2032021-02-26 10:04:02 -0800226 # ONOS custom image handling
227 if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
228 IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100229 EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=\$onosRepo,onos-classic.image.tag=\$onosTag "
Matteo Scandolob2de2032021-02-26 10:04:02 -0800230 fi
Matteo Scandolo7e8a6962020-08-04 12:19:59 -0700231
Matteo Scandolob2de2032021-02-26 10:04:02 -0800232 # set BBSim parameters
233 EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus} '
Matteo Scandolo1c5ffab2020-07-17 08:53:01 -0700234
Matteo Scandolob2de2032021-02-26 10:04:02 -0800235 # disable the securityContext, this is a development cluster
236 EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
Matteo Scandolo1c5ffab2020-07-17 08:53:01 -0700237
Matteo Scandolob2de2032021-02-26 10:04:02 -0800238 # No persistent-volume-claims in Atomix
239 EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
Matteo Scandolod2e2a0d2020-06-10 18:02:03 -0700240
Matteo Scandolob2de2032021-02-26 10:04:02 -0800241 # Use custom built images
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700242
Matteo Scandolob2de2032021-02-26 10:04:02 -0800243 if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
244 EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,voltha.images.rw_core.tag=voltha-scale "
245 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700246
Matteo Scandolob2de2032021-02-26 10:04:02 -0800247 if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
248 EXTRA_HELM_FLAGS+="--set voltha-openolt-adapter.images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,voltha-openolt-adapter.images.adapter_open_olt.tag=voltha-scale "
249 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700250
Matteo Scandolob2de2032021-02-26 10:04:02 -0800251 if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
252 EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter.images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,voltha-openonu-adapter.images.adapter_open_onu.tag=voltha-scale "
253 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700254
Matteo Scandolob2de2032021-02-26 10:04:02 -0800255 if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
256 EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter-go.images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,voltha-openonu-adapter-go.images.adapter_open_onu_go.tag=voltha-scale "
257 fi
Andrea Campanellaed026982020-11-20 10:06:42 +0100258
Matteo Scandolob2de2032021-02-26 10:04:02 -0800259 if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
260 EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,ofagent-go.images.ofagent.tag=voltha-scale "
261 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700262
Matteo Scandolob2de2032021-02-26 10:04:02 -0800263 if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100264 EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=${dockerRegistry}/voltha/voltha-onos,onos-classic.image.tag=voltha-scale "
Matteo Scandolob2de2032021-02-26 10:04:02 -0800265 fi
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700266
Matteo Scandolob2de2032021-02-26 10:04:02 -0800267 if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
268 EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
269 fi
Andrea Campanella238bd362021-04-07 12:30:15 +0200270 echo \$EXTRA_HELM_FLAGS
271
272 """).trim()
273
Matteo Scandolod3247ae2021-04-07 12:55:55 -0700274 def extraHelmFlags = returned_flags
Matteo Scandoloed1afdd2021-04-02 16:25:45 -0700275 def infraHelmFlags =
Matteo Scandolobaf74892021-04-02 11:03:51 -0700276 " --set etcd.enabled=false,kafka.enabled=false" +
Matteo Scandoloed1afdd2021-04-02 16:25:45 -0700277 " --set global.log_level=${logLevel} " +
Matteo Scandolod3247ae2021-04-07 12:55:55 -0700278 extraHelmFlags + params.extraHelmFlags
Matteo Scandolobaf74892021-04-02 11:03:51 -0700279
Andrea Campanella238bd362021-04-07 12:30:15 +0200280 println "Passing the following parameters to the VOLTHA infra deploy: ${infraHelmFlags}."
281
Matteo Scandolobaf74892021-04-02 11:03:51 -0700282 volthaInfraDeploy([
283 workflow: workflow,
284 infraNamespace: "default",
285 extraHelmFlags: infraHelmFlags,
286 localCharts: false, // TODO support custom charts
287 onosReplica: onosReplicas,
288 atomixReplica: atomixReplicas,
289 ])
290
Matteo Scandoloed1afdd2021-04-02 16:25:45 -0700291 def stackHelmFlags = "${ofAgentConnections(onosReplicas.toInteger(), "voltha-infra", "default")} " +
Matteo Scandolobaf74892021-04-02 11:03:51 -0700292 "--set voltha.services.kafka.adapter.address=kafka.default.svc:9092 " +
293 "--set voltha.services.kafka.cluster.address=kafka.default.svc:9092 " +
294 "--set voltha.services.etcd.address=etcd.default.svc:2379 " +
295 "--set voltha-adapter-openolt.services.kafka.adapter.address=kafka.default.svc:9092 " +
296 "--set voltha-adapter-openolt.services.kafka.cluster.address=kafka.default.svc:9092 " +
297 "--set voltha-adapter-openolt.services.etcd.address=etcd.default.svc:2379 " +
298 "--set voltha-adapter-openonu.services.kafka.adapter.address=kafka.default.svc:9092 " +
299 "--set voltha-adapter-openonu.services.kafka.cluster.address=kafka.default.svc:9092 " +
300 "--set voltha-adapter-openonu.services.etcd.address=etcd.default.svc:2379"
301
302 stackHelmFlags += " --set onu=${onus},pon=${pons} --set global.log_level=${logLevel.toLowerCase()} "
Matteo Scandoloed1afdd2021-04-02 16:25:45 -0700303 stackHelmFlags += extraHelmFlags
Matteo Scandolobaf74892021-04-02 11:03:51 -0700304
305 volthaStackDeploy([
306 bbsimReplica: olts.toInteger(),
307 infraNamespace: "default",
308 volthaNamespace: "default",
309 stackName: "voltha1", // TODO support custom charts
310 workflow: workflow,
311 extraHelmFlags: stackHelmFlags,
312 localCharts: false,
313 ])
Matteo Scandolodbda3272021-03-04 14:50:07 -0800314 sh """
315 set +x
Matteo Scandolob2de2032021-02-26 10:04:02 -0800316
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100317 echo -ne "\nWaiting for VOLTHA and ONOS to start..."
Matteo Scandolo39c531a2021-01-22 16:05:32 -0800318 voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100319 onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
Andrea Campanellaae871e42021-03-08 18:52:25 +0100320 while [[ \$voltha != 0 || \$onos != 0 ]]; do
Matteo Scandolob2de2032021-02-26 10:04:02 -0800321 sleep 5
322 echo -ne "."
323 voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
Andrea Campanella4fca92c2021-03-08 13:08:28 +0100324 onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
Matteo Scandolob2de2032021-02-26 10:04:02 -0800325 done
Andrea Campanellaae871e42021-03-08 18:52:25 +0100326 echo -ne "\nVOLTHA and ONOS pods ready\n"
327 kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l
328 kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l
Matteo Scandolob2de2032021-02-26 10:04:02 -0800329 """
Matteo Scandolodbda3272021-03-04 14:50:07 -0800330 start_port_forward(olts)
Matteo Scandolob2de2032021-02-26 10:04:02 -0800331 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700332 }
333 }
334 }
Matteo Scandolo0430f672020-05-07 11:50:26 -0700335 stage('Configuration') {
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700336 steps {
Matteo Scandolo37cba472020-10-26 14:15:34 -0700337 script {
Andrea Campanellaf2460e8fb2021-03-15 22:03:09 +0100338 def tech_prof_directory = "XGS-PON"
Matteo Scandolo37cba472020-10-26 14:15:34 -0700339 sh returnStdout: false, script: """
Matteo Scandolo0430f672020-05-07 11:50:26 -0700340 #Setting link discovery
Matteo Scandolodbda3272021-03-04 14:50:07 -0800341 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
Matteo Scandolo0430f672020-05-07 11:50:26 -0700342
Matteo Scandolodbda3272021-03-04 14:50:07 -0800343 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
344 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
Matteo Scandolo2264d9c2020-10-16 14:25:32 -0700345
Matteo Scandolo9cdacc52020-10-21 14:54:06 -0700346
Matteo Scandoloea061332021-03-25 16:26:22 -0700347 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
Andrea Campanelladeec1582020-10-28 09:37:58 +0100348
Matteo Scandolodbda3272021-03-04 14:50:07 -0800349 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
Andrea Campanelladeec1582020-10-28 09:37:58 +0100350
Matteo Scandoloea061332021-03-25 16:26:22 -0700351 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
352
Andrea Campanellaae871e42021-03-08 18:52:25 +0100353 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set ${logLevel} org.onosproject
354 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set ${logLevel} org.opencord
Andrea Campanella33b48722020-10-23 12:31:47 +0200355
Matteo Scandolo89f58332021-03-26 15:40:00 -0700356 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.opencord.cordmcast
357 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.onosproject.mcast
358 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.opencord.igmpproxy
359 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.opencord.olt
Matteo Scandoloc348aea2020-10-07 13:36:04 -0700360
Matteo Scandolo37cba472020-10-26 14:15:34 -0700361 kubectl exec \$(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print \$1}') -- bbsimctl log ${logLevel.toLowerCase()} false
Matteo Scandolo0430f672020-05-07 11:50:26 -0700362
Matteo Scandolo3136cca2020-05-15 14:14:27 -0700363 # Set Flows/Ports/Meters poll frequency
Matteo Scandolodbda3272021-03-04 14:50:07 -0800364 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
365 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
Matteo Scandolo3136cca2020-05-15 14:14:27 -0700366
Matteo Scandolo0430f672020-05-07 11:50:26 -0700367 if [ ${withFlows} = false ]; then
Matteo Scandolodbda3272021-03-04 14:50:07 -0800368 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
Matteo Scandolo0430f672020-05-07 11:50:26 -0700369 fi
370
Andrea Campanellaf2460e8fb2021-03-15 22:03:09 +0100371 if [ '${workflow}' = 'tt' ]; then
372 etcd_container=\$(kubectl get pods --all-namespaces | grep etcd | awk 'NR==1{print \$2}')
373 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
374 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64')
375 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
376 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65')
377 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST.json \$etcd_container:/tmp/mcast.json
378 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66')
379 fi
380
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700381 if [ ${withPcap} = true ] ; then
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700382 # Start the tcp-dump in ofagent
Matteo Scandolo37cba472020-10-26 14:15:34 -0700383 export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
384 kubectl exec \$OF_AGENT -- apk update
385 kubectl exec \$OF_AGENT -- apk add tcpdump
386 kubectl exec \$OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
387 _TAG=ofagent-tcpdump kubectl exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
Matteo Scandolo77fa78d2020-09-16 16:53:50 -0700388
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700389 # Start the tcp-dump in radius
Matteo Scandolo37cba472020-10-26 14:15:34 -0700390 export RADIUS=\$(kubectl get pods -l app=radius -o name)
391 kubectl exec \$RADIUS -- apt-get update
392 kubectl exec \$RADIUS -- apt-get install -y tcpdump
393 _TAG=radius-tcpdump kubectl exec \$RADIUS -- tcpdump -w out.pcap&
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700394
395 # Start the tcp-dump in ONOS
Matteo Scandolo37cba472020-10-26 14:15:34 -0700396 for i in \$(seq 0 \$ONOSES); do
397 INSTANCE="onos-onos-classic-\$i"
398 kubectl exec \$INSTANCE -- apt-get update
399 kubectl exec \$INSTANCE -- apt-get install -y tcpdump
400 kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
401 _TAG=\$INSTANCE kubectl exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700402 done
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700403 fi
Matteo Scandolo37cba472020-10-26 14:15:34 -0700404 """
405 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700406 }
407 }
Matteo Scandolofcb75632021-04-06 16:25:19 -0700408 stage('Load MIB Template') {
409 when {
410 expression {
411 return params.withMibTemplate
412 }
413 }
414 steps {
415 sh """
416 # load MIB template
417 wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter-go/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
418 cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods |grep etcd | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/go_templates/BBSM/12345123451234512345/00000000000001
419 """
420 }
421 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700422 stage('Run Test') {
423 steps {
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700424 sh '''
425 mkdir -p $WORKSPACE/RobotLogs
426 cd $WORKSPACE/voltha-system-tests
427 make vst_venv
428 '''
429 sh '''
430 if [ ${withProfiling} = true ] ; then
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700431 mkdir -p $LOG_FOLDER/pprof
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700432 echo $PATH
433 #Creating Python script for ONU Detection
434 cat << EOF > $WORKSPACE/pprof.sh
Matteo Scandolo3ddd3fb2020-05-12 14:31:14 -0700435timestamp() {
436 date +"%T"
437}
438
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700439i=0
440while [[ true ]]; do
441 ((i++))
Matteo Scandolo3ddd3fb2020-05-12 14:31:14 -0700442 ts=$(timestamp)
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700443 go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
444 go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
445 curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
446 go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700447
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700448 go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
449 go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
450 curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
451 go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700452
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700453 go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
454 go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
455 curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
456 go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
Matteo Scandolo731d12c2020-05-13 14:33:26 -0700457
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700458 sleep 10
459done
460EOF
461
462 _TAG="pprof"
463 _TAG=$_TAG bash $WORKSPACE/pprof.sh &
464 fi
465 '''
Matteo Scandolob7d60ba2020-11-06 09:46:11 -0800466 timeout(time: 15, unit: 'MINUTES') {
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700467 sh '''
Matteo Scandolofebf6512021-03-02 11:37:37 -0800468 ROBOT_PARAMS="--exitonfailure \
469 -v olt:${olts} \
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700470 -v pon:${pons} \
471 -v onu:${onus} \
472 -v workflow:${workflow} \
473 -v withEapol:${withEapol} \
474 -v withDhcp:${withDhcp} \
475 -v withIgmp:${withIgmp} \
476 --noncritical non-critical \
Hardik Windlassc716a882021-02-03 15:21:07 +0000477 -e igmp -e teardown "
Matteo Scandolo0430f672020-05-07 11:50:26 -0700478
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700479 if [ ${withEapol} = false ] ; then
480 ROBOT_PARAMS+="-e authentication "
481 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700482
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700483 if [ ${withDhcp} = false ] ; then
484 ROBOT_PARAMS+="-e dhcp "
485 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700486
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700487 if [ ${provisionSubscribers} = false ] ; then
Matteo Scandolocd59fd02020-05-12 15:00:35 -0700488 # if we're not considering subscribers then we don't care about authentication and dhcp
Matteo Scandolo111c8932020-05-12 18:28:05 -0700489 ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700490 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700491
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700492 if [ ${withFlows} = false ] ; then
493 ROBOT_PARAMS+="-i setup -i activation "
494 fi
Matteo Scandolo0430f672020-05-07 11:50:26 -0700495
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700496 cd $WORKSPACE/voltha-system-tests
Matteo Scandolo9b0728b2020-05-11 08:25:57 -0700497 source ./vst_venv/bin/activate
498 robot -d $WORKSPACE/RobotLogs \
499 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
500 '''
501 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700502 }
503 }
Hardik Windlassc716a882021-02-03 15:21:07 +0000504 stage('Run Igmp Tests') {
505 environment {
506 ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/IgmpTests"
507 }
508 when {
509 expression {
510 return params.withIgmp
511 }
512 }
513 steps {
Andrea Campanella6fe1b032021-04-01 17:47:15 +0200514 sh returnStdout: false, script: """
515 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.onosproject.store.group.impl
516 """
Hardik Windlassc716a882021-02-03 15:21:07 +0000517 sh '''
518 set +e
Andrea Campanella7ba63af2021-03-09 10:48:07 +0100519 mkdir -p $ROBOT_LOGS_DIR
Hardik Windlassc716a882021-02-03 15:21:07 +0000520 cd $WORKSPACE/voltha-system-tests
521 make vst_venv
522 '''
Matteo Scandolofebf6512021-03-02 11:37:37 -0800523 timeout(time: 11, unit: 'MINUTES') {
Hardik Windlassc716a882021-02-03 15:21:07 +0000524 sh '''
Matteo Scandolofebf6512021-03-02 11:37:37 -0800525 ROBOT_PARAMS="--exitonfailure \
526 -v olt:${olts} \
Hardik Windlassc716a882021-02-03 15:21:07 +0000527 -v pon:${pons} \
528 -v onu:${onus} \
529 -v workflow:${workflow} \
530 -v withEapol:${withEapol} \
531 -v withDhcp:${withDhcp} \
532 -v withIgmp:${withIgmp} \
533 --noncritical non-critical \
534 -i igmp \
535 -e setup -e activation -e flow-before \
536 -e authentication -e provision -e flow-after \
537 -e dhcp -e teardown "
538 cd $WORKSPACE/voltha-system-tests
539 source ./vst_venv/bin/activate
540 robot -d $ROBOT_LOGS_DIR \
541 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
542 '''
543 }
544 }
545 }
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700546 }
547 post {
548 always {
Matteo Scandolo157f66c2020-05-12 09:26:19 -0700549 // collect result, done in the "post" step so it's executed even in the
550 // event of a timeout in the tests
551 sh '''
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700552
Matteo Scandolo7d6695c2020-08-25 13:13:16 -0700553 # stop the kail processes
554 list=($APPS_TO_LOG)
555 for app in "${list[@]}"
556 do
557 echo "Stopping logs for: ${app}"
558 _TAG="kail-$app"
559 P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
560 if [ -n "$P_IDS" ]; then
561 echo $P_IDS
562 for P_ID in $P_IDS; do
563 kill -9 $P_ID
564 done
565 fi
566 done
567
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700568 if [ ${withPcap} = true ] ; then
569 # stop ofAgent tcpdump
570 P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
571 if [ -n "\$P_ID" ]; then
572 kill -9 \$P_ID
573 fi
574
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700575 # stop radius tcpdump
576 P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
577 if [ -n "\$P_ID" ]; then
578 kill -9 \$P_ID
579 fi
580
581 # stop onos tcpdump
582 LIMIT=$(($NUM_OF_ONOS - 1))
583 for i in $(seq 0 $LIMIT); do
584 INSTANCE="onos-onos-classic-$i"
585 P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
586 if [ -n "\$P_ID" ]; then
587 kill -9 \$P_ID
588 fi
589 done
590
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700591 # copy the file
Matteo Scandoloa7600f12020-09-21 16:09:27 -0700592 export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
593 kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
Matteo Scandolo77fa78d2020-09-16 16:53:50 -0700594
Andrea Campanella190854a2020-10-20 14:30:42 +0200595 export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
596 kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
Matteo Scandolo34d6a7a2020-10-20 09:29:58 -0700597
598 LIMIT=$(($NUM_OF_ONOS - 1))
599 for i in $(seq 0 $LIMIT); do
600 INSTANCE="onos-onos-classic-$i"
601 kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
602 done
Matteo Scandoloc9dd44f2020-06-18 15:06:04 -0700603 fi
604
Matteo Scandolo157f66c2020-05-12 09:26:19 -0700605 cd voltha-system-tests
606 source ./vst_venv/bin/activate
Matteo Scandolo7d6695c2020-08-25 13:13:16 -0700607 python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
Matteo Scandolo157f66c2020-05-12 09:26:19 -0700608 cat $WORKSPACE/execution-time.txt
609 '''
Matteo Scandoloa731f8f2020-05-11 10:27:26 -0700610 sh '''
611 if [ ${withProfiling} = true ] ; then
612 _TAG="pprof"
613 P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
614 if [ -n "$P_IDS" ]; then
615 echo $P_IDS
616 for P_ID in $P_IDS; do
617 kill -9 $P_ID
618 done
619 fi
620 fi
621 '''
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700622 plot([
623 csvFileName: 'scale-test.csv',
624 csvSeries: [
Matteo Scandolo272aed42020-05-08 15:05:57 -0700625 [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
626 [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
627 [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo64966762020-05-13 11:51:38 -0700628 [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo272aed42020-05-08 15:05:57 -0700629 [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
630 [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
631 [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo64966762020-05-13 11:51:38 -0700632 [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolo272aed42020-05-08 15:05:57 -0700633 [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
634 [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700635 ],
636 group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
637 ])
638 step([$class: 'RobotPublisher',
639 disableArchiveOutput: false,
Hardik Windlassc716a882021-02-03 15:21:07 +0000640 logFileName: '**/log*.html',
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700641 otherFiles: '',
Hardik Windlassc716a882021-02-03 15:21:07 +0000642 outputFileName: '**/output*.xml',
643 outputPath: 'RobotLogs',
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700644 passThreshold: 100,
Hardik Windlassc716a882021-02-03 15:21:07 +0000645 reportFileName: '**/report*.html',
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700646 unstableThreshold: 0]);
Matteo Scandolo502644b2020-05-18 08:56:18 -0700647 // get all the logs from kubernetes PODs
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700648 sh returnStdout: false, script: '''
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700649
Matteo Scandoloc495b362020-07-17 10:44:12 -0700650 # store information on running charts
Matteo Scandolo9214ebd2020-07-30 17:57:10 -0700651 helm ls > $LOG_FOLDER/helm-list.txt || true
Matteo Scandoloc495b362020-07-17 10:44:12 -0700652
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700653 # store information on the running pods
Matteo Scandolo9214ebd2020-07-30 17:57:10 -0700654 kubectl get pods -o wide > $LOG_FOLDER/pods.txt || true
655 kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
656 kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
Matteo Scandoloede5abd2020-05-22 10:57:10 -0700657
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700658 # copy the ONOS logs directly from the container to avoid the color codes
Matteo Scandolodbda3272021-03-04 14:50:07 -0800659 printf '%s\n' $(kubectl get pods -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
Matteo Scandoloa2f07fc2020-10-08 18:30:54 -0700660
Matteo Scandolo064efbc2021-03-29 17:24:34 -0700661 # get ONOS cfg from the 3 nodes
662 printf '%s\n' $(kubectl get pods -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl exec -it # -- ${karafHome}/bin/client cfg get > $LOG_FOLDER/#.cfg" || true
663
664
Matteo Scandoloa2f07fc2020-10-08 18:30:54 -0700665 # get radius logs out of the container
Matteo Scandolob2de2032021-02-26 10:04:02 -0800666 kubectl cp $(kubectl get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER/radius.log || true
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700667 '''
Matteo Scandolo27553c02020-07-16 17:21:57 -0700668 // dump all the BBSim(s) ONU information
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700669 sh '''
670 BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
671 IDS=($BBSIM_IDS)
672
673 for bbsim in "${IDS[@]}"
674 do
Matteo Scandolo900e5112020-09-08 10:16:31 -0700675 kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
676 kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
Matteo Scandolo6b66b582021-03-10 14:33:47 -0800677 kubectl exec -t $bbsim -- bbsimctl olt resources GEM_PORT > $LOG_FOLDER/$bbsim-flows-gem-ports.txt || true
678 kubectl exec -t $bbsim -- bbsimctl olt resources ALLOC_ID > $LOG_FOLDER/$bbsim-flows-alloc-ids.txt || true
679 kubectl exec -t $bbsim -- bbsimctl olt pons > $LOG_FOLDER/$bbsim-pon-resources.txt || true
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700680 done
681 '''
Matteo Scandolodbda3272021-03-04 14:50:07 -0800682 script {
683 // first make sure the port-forward is still running,
684 // sometimes Jenkins kills it relardless of the JENKINS_NODE_COOKIE=dontKillMe
685 def running = sh (
686 script: 'ps aux | grep port-forw | grep -E "onos|voltha" | grep -v grep | wc -l',
687 returnStdout: true
688 ).trim()
689 // if any of the voltha-api, onos-rest, onos-ssh port-forwards are not there
690 // kill all and restart
691 if (running != "3") {
692 start_port_forward(olts)
693 }
694 }
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700695 // get ONOS debug infos
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700696 sh '''
Matteo Scandolobbd8f902020-09-24 08:40:58 -0700697
Matteo Scandolodbda3272021-03-04 14:50:07 -0800698 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt
699 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt
700 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt
701 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt
Andrea Campanellae0c839f2021-03-16 17:53:40 +0100702 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg get > $LOG_FOLDER/onos-cfg.txt
Andrea Campanella9eeb4e72021-03-19 10:00:43 +0100703 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 netcfg > $LOG_FOLDER/onos-netcfg.txt
Matteo Scandolodbda3272021-03-04 14:50:07 -0800704
705 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt
706 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700707
708 if [ ${withFlows} = true ] ; then
Matteo Scandolodbda3272021-03-04 14:50:07 -0800709 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt
710 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt
711 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700712 fi
713
Matteo Scandolo0bf7e9e2020-05-29 18:17:50 -0700714 if [ ${provisionSubscribers} = true ]; then
Matteo Scandolodbda3272021-03-04 14:50:07 -0800715 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt
716 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt
717 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt
718 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700719 fi
720
Matteo Scandolo172c9ca2020-06-10 12:23:48 -0700721 if [ ${withEapol} = true ] ; then
Matteo Scandolodbda3272021-03-04 14:50:07 -0800722 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt
723 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700724 fi
725
Matteo Scandolo172c9ca2020-06-10 12:23:48 -0700726 if [ ${withDhcp} = true ] ; then
Matteo Scandolodbda3272021-03-04 14:50:07 -0800727 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt
Matteo Scandolofebf6512021-03-02 11:37:37 -0800728 fi
729
730 if [ ${withIgmp} = true ] ; then
Matteo Scandolodbda3272021-03-04 14:50:07 -0800731 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 mcast-host-routes > $LOG_FOLDER/onos-mcast-host-routes.txt
732 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 mcast-host-show > $LOG_FOLDER/onos-mcast-host-show.txt
733 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 groups > $LOG_FOLDER/onos-groups.txt
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700734 fi
Matteo Scandolob70b3e02020-05-07 11:50:26 -0700735 '''
Shrey Baidcf652c82020-05-21 13:35:04 +0530736 // collect etcd metrics
737 sh '''
Matteo Scandolo77fa78d2020-09-16 16:53:50 -0700738 mkdir -p $WORKSPACE/etcd-metrics
Matteo Scandolo9214ebd2020-07-30 17:57:10 -0700739 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
740 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
741 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
742 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
Andrea Campanella31fd31f2020-11-20 19:02:58 +0100743 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-sum.json || true
744 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-bucket.json || true
745 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_wal_fsync_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-wal-fsync-time-bucket.json || true
Andrea Campanella23a1c322020-11-25 17:11:55 +0100746 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_network_peer_round_trip_time_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-network-peer-round-trip-time-seconds.json || true
747
Shrey Baidcf652c82020-05-21 13:35:04 +0530748 '''
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700749 // get VOLTHA debug infos
Matteo Scandolo502644b2020-05-18 08:56:18 -0700750 script {
751 try {
752 sh '''
Matteo Scandolof54c9b32020-08-27 07:58:27 -0700753 voltctl -m 8MB device list -o json > $LOG_FOLDER/device-list.json || true
754 python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
755 rm $LOG_FOLDER/device-list.json || true
756 voltctl -m 8MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700757
Matteo Scandolobe823242020-11-20 13:48:13 -0800758 printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
759 printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
Matteo Scandolo32da27d2020-05-29 10:38:31 -0700760
Matteo Scandolobe823242020-11-20 13:48:13 -0800761 printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
762 printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
Matteo Scandolo502644b2020-05-18 08:56:18 -0700763 '''
764 } catch(e) {
765 sh '''
766 echo "Can't get device list from voltclt"
767 '''
768 }
769 }
Matteo Scandolo27553c02020-07-16 17:21:57 -0700770 // get cpu usage by container
771 sh '''
Matteo Scandolo7d6695c2020-08-25 13:13:16 -0700772 if [ ${withMonitoring} = true ] ; then
773 cd $WORKSPACE/voltha-system-tests
774 source ./vst_venv/bin/activate
775 sleep 60 # we have to wait for prometheus to collect all the information
776 python tests/scale/sizing.py -o $WORKSPACE/plots || true
777 fi
Matteo Scandolo27553c02020-07-16 17:21:57 -0700778 '''
Matteo Scandolo7cf2fc22021-03-01 18:33:42 -0800779 archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
Matteo Scandolofbcbdb82020-05-06 15:41:32 -0700780 }
781 }
782}
Matteo Scandolodbda3272021-03-04 14:50:07 -0800783
784def start_port_forward(olts) {
785 sh """
786 daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/voltha-infra-onos-classic-hs 8101:8101
787 daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/voltha-infra-onos-classic-hs 8181:8181
788 daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/voltha1-voltha-api 55555:55555
789
790 bbsimRestPortFwd=50071
791 for i in {0..${olts.toInteger() - 1}}; do
792 daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/bbsim\${i} \${bbsimRestPortFwd}:50071
793 ((bbsimRestPortFwd++))
794 done
795 """
796}