blob: 88d60706ed0469f7e81a1215226eacd6e83d5251 [file] [log] [blame]
Joey Armstrong7adbfb02023-01-24 17:02:37 -05001// Copyright 2019-2023 Open Networking Foundation (ONF) and the ONF Contributors
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15// deploy VOLTHA and performs a scale test
16
17library identifier: 'cord-jenkins-libraries@master',
18 retriever: modernSCM([
19 $class: 'GitSCMSource',
20 remote: 'https://gerrit.opencord.org/ci-management.git'
21])
22
23// this function generates the correct parameters for ofAgent
24// to connect to multiple ONOS instances
25def ofAgentConnections(numOfOnos, releaseName, namespace) {
26 def params = " "
27 numOfOnos.times {
28 params += "--set voltha.services.controller[${it}].address=${releaseName}-onos-classic-${it}.${releaseName}-onos-classic-hs.${namespace}.svc:6653 "
29 }
30 return params
31}
32
33pipeline {
34
35 /* no label, executor is determined by JJB */
36 agent {
37 label "${params.buildNode}"
38 }
39 options {
40 timeout(time: 60, unit: 'MINUTES')
41 }
42 environment {
43 JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
44 KUBECONFIG="$HOME/.kube/config"
45 VOLTCONFIG="$HOME/.volt/config"
46 SSHPASS="karaf"
47 VOLTHA_LOG_LEVEL="${logLevel}"
48 NUM_OF_BBSIM="${olts}"
49 NUM_OF_OPENONU="${openonuAdapterReplicas}"
50 NUM_OF_ONOS="${onosReplicas}"
51 NUM_OF_ATOMIX="${atomixReplicas}"
52 EXTRA_HELM_FLAGS=" "
53 LOG_FOLDER="$WORKSPACE/logs"
54 GERRIT_PROJECT="${GERRIT_PROJECT}"
55 PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
56 }
57
58 stages {
59 stage ('Cleanup') {
60 steps {
61 script {
62 try {
63 timeout(time: 5, unit: 'MINUTES') {
64 sh returnStdout: false, script: '''
65 cd $WORKSPACE
66 rm -rf $WORKSPACE/*
67 '''
68 // removing the voltha-infra chart first
69 // if we don't ONOS might get stuck because of all the events when BBSim goes down
70 sh returnStdout: false, script: '''
71 set +x
72 helm del voltha-infra || true
73 echo -ne "\nWaiting for ONOS to be removed..."
74 onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
75 while [[ $onos != 0 ]]; do
76 onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
77 sleep 5
78 echo -ne "."
79 done
80 '''
81 }
82 } catch(org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
83 // if we have a timeout in the Cleanup fase most likely ONOS got stuck somewhere, thuse force remove the pods
84 sh '''
85 kubectl get pods | grep Terminating | awk '{print $1}' | xargs kubectl delete pod --force --grace-period=0
86 '''
87 }
88 timeout(time: 10, unit: 'MINUTES') {
89 script {
90 helmTeardown(["default", "voltha1", "infra"])
91 }
92 sh returnStdout: false, script: '''
93 helm repo add onf https://charts.opencord.org
94 helm repo update
95
96 # remove all persistent volume claims
97 kubectl delete pvc --all-namespaces --all
98 PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
99 while [[ \$PVCS != 0 ]]; do
100 sleep 5
101 PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
102 done
103
104 # remove orphaned port-forward from different namespaces
105 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
106 '''
107 }
108 }
109 }
110 }
111 stage('Download Code') {
112 steps {
113 getVolthaCode([
114 branch: "${release}",
115 volthaSystemTestsChange: "${volthaSystemTestsChange}",
116 volthaHelmChartsChange: "${volthaHelmChartsChange}",
117 ])
118 }
119 }
120 stage('Build patch') {
121 when {
122 expression {
123 return params.GERRIT_PROJECT
124 }
125 }
126 steps {
127 sh """
128 git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
129 cd \$GERRIT_PROJECT
130 git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
131
132 DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
133 DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
134 """
135 }
136 }
137 stage('Deploy common infrastructure') {
138 steps {
139 sh '''
140 if [ ${withMonitoring} = true ] ; then
141 helm install nem-monitoring onf/nem-monitoring \
142 -f $HOME/voltha-scale/grafana.yaml \
143 --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
144 --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
145 fi
146 '''
147 }
148 }
149 stage('Deploy Voltha') {
150 steps {
151 timeout(time: 10, unit: 'MINUTES') {
152 installVoltctl("${release}")
153 script {
154 startComponentsLogs([
155 appsToLog: [
156 'app.kubernetes.io/name=etcd',
157 'app.kubernetes.io/name=kafka',
158 'app=voltha-infra-atomix',
159 'app=onos-classic',
160 'app=adapter-open-onu',
161 'app=adapter-open-olt',
162 'app=rw-core',
163 'app=ofagent',
164 'app=bbsim',
165 'app=radius',
166 'app=bbsim-sadis-server',
167 'app=onos-config-loader',
168 ]
169 ])
170 def returned_flags = sh (returnStdout: true, script: """
171
172 export EXTRA_HELM_FLAGS+=' '
173
174 # BBSim custom image handling
175 if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
176 IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
177 EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
178 fi
179
180 # VOLTHA custom image handling
181 if [ '${rwCoreImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
182 IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
183 EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=\$rwCoreRepo,voltha.images.rw_core.tag=\$rwCoreTag "
184 fi
185
186 # ofAgent custom image handling
187 if [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'of-agent' ]; then
188 IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
189 EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=\$ofAgentRepo,voltha.images.ofagent.tag=\$ofAgentTag "
190 fi
191
192 # OpenOLT custom image handling
193 if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
194 IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
195 EXTRA_HELM_FLAGS+="--set voltha-adapter-openolt.images.adapter_open_olt.repository=\$openoltAdapterRepo,voltha-adapter-openolt.images.adapter_open_olt.tag=\$openoltAdapterTag "
196 fi
197
198 # OpenONU custom image handling
199 if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
200 IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
201 EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu.repository=\$openonuAdapterRepo,voltha-adapter-openonu.images.adapter_open_onu.tag=\$openonuAdapterTag "
202 fi
203
204 # OpenONU GO custom image handling
205 if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
206 IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
207 EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,voltha-adapter-openonu.images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
208 fi
209
210 # ONOS custom image handling
211 if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
212 IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
213 EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=\$onosRepo,onos-classic.image.tag=\$onosTag "
214 fi
215
216 # set BBSim parameters
217 EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus},uni=${unis} '
218
219 # disable the securityContext, this is a development cluster
220 EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
221
222 # No persistent-volume-claims in Atomix
223 EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
224
225 # Use custom built images
226
227 if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
228 EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,voltha.images.rw_core.tag=voltha-scale "
229 fi
230
231 if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
232 EXTRA_HELM_FLAGS+="--set voltha-openolt-adapter.images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,voltha-openolt-adapter.images.adapter_open_olt.tag=voltha-scale "
233 fi
234
235 if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
236 EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter.images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,voltha-openonu-adapter.images.adapter_open_onu.tag=voltha-scale "
237 fi
238
239 if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
240 EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter-go.images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,voltha-openonu-adapter-go.images.adapter_open_onu_go.tag=voltha-scale "
241 fi
242
243 if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
244 EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,ofagent-go.images.ofagent.tag=voltha-scale "
245 fi
246
247 if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
248 EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=${dockerRegistry}/voltha/voltha-onos,onos-classic.image.tag=voltha-scale "
249 fi
250
251 if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
252 EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
253 fi
254 echo \$EXTRA_HELM_FLAGS
255
256 """).trim()
257
258 def extraHelmFlags = returned_flags
259 // The added space before params.extraHelmFlags is required due to the .trim() above
260 def infraHelmFlags =
261 "--set global.log_level=${logLevel} " +
262 "--set radius.enabled=${withEapol} " +
263 "--set onos-classic.onosSshPort=30115 " +
264 "--set onos-classic.onosApiPort=30120 " +
265 extraHelmFlags + " " + params.extraHelmFlags
266
267 println "Passing the following parameters to the VOLTHA infra deploy: ${infraHelmFlags}."
268
269 def localCharts = false
270 if (volthaHelmChartsChange != "") {
271 localCharts = true
272 }
273
274 volthaInfraDeploy([
275 workflow: workflow,
276 infraNamespace: "default",
277 extraHelmFlags: infraHelmFlags,
278 localCharts: localCharts,
279 onosReplica: onosReplicas,
280 atomixReplica: atomixReplicas,
281 kafkaReplica: kafkaReplicas,
282 etcdReplica: etcdReplicas,
283 ])
284
285 stackHelmFlags = " --set onu=${onus},pon=${pons},uni=${unis} --set global.log_level=${logLevel.toLowerCase()} "
286 stackHelmFlags += " --set voltha.ingress.enabled=true --set voltha.ingress.enableVirtualHosts=true --set voltha.fullHostnameOverride=voltha.scale1.dev "
287 stackHelmFlags += extraHelmFlags + " " + params.extraHelmFlags
288
289 volthaStackDeploy([
290 bbsimReplica: olts.toInteger(),
291 infraNamespace: "default",
292 volthaNamespace: "default",
293 stackName: "voltha1", // TODO support custom charts
294 workflow: workflow,
295 extraHelmFlags: stackHelmFlags,
296 localCharts: localCharts,
297 onosReplica: onosReplicas,
298 ])
299 sh """
300 set +x
301
302 echo -ne "\nWaiting for VOLTHA and ONOS to start..."
303 voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
304 onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
305 while [[ \$voltha != 0 || \$onos != 0 ]]; do
306 sleep 5
307 echo -ne "."
308 voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
309 onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
310 done
311 echo -ne "\nVOLTHA and ONOS pods ready\n"
312 kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l
313 kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l
314 """
315 start_port_forward(olts)
316 }
317 }
318 }
319 }
320 stage('Configuration') {
321 steps {
322 script {
323 setOnosLogLevels([
324 onosNamespace: "default",
325 apps: [
326 'org.opencord.dhcpl2relay',
327 'org.opencord.olt',
328 'org.opencord.aaa',
329 'org.opencord.maclearner',
330 'org.onosproject.net.flowobjective.impl.FlowObjectiveManager',
331 'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager'
332 ],
333 logLevel: logLevel
334 ])
335 def tech_prof_directory = "XGS-PON"
336 sh returnStdout: false, script: """
337 #Setting link discovery
338 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
339
340 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
341 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
342
343
344 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
345
346 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
347
348 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
349
350 # BBSim logs at debug level don't slow down the system much and are very helpful while troubleshooting
351 BBSIM_IDS=\$(kubectl get pods | grep bbsim | grep -v server | awk '{print \$1}')
352 IDS=(\$BBSIM_IDS)
353
354 for bbsim in "\${IDS[@]}"
355 do
356 kubectl exec -t \$bbsim -- bbsimctl log debug false
357 done
358
359 # Set Flows/Ports/Meters/Groups poll frequency
360 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
361 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
362 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.group.impl.OpenFlowGroupProvider groupPollInterval ${onosGroupInterval}
363 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.FlowObjectiveManager numThreads ${flowObjWorkerThreads}
364 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager objectiveTimeoutMs 300000
365
366 if [ ${withFlows} = false ]; then
367 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 app deactivate org.opencord.olt
368 fi
369
370 if [ '${workflow}' = 'tt' ]; then
371 etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
372 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
373 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64')
374 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
375 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65')
376 kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast.json
377 put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66')
378 fi
379
380 if [ ${withPcap} = true ] ; then
381 # Start the tcp-dump in ofagent
382 export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
383 kubectl exec \$OF_AGENT -- apk update
384 kubectl exec \$OF_AGENT -- apk add tcpdump
385 _TAG=ofagent-tcpdump kubectl exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
386
387 # Start the tcp-dump in radius
388 export RADIUS=\$(kubectl get pods -l app=radius -o name)
389 kubectl exec \$RADIUS -- apt-get update
390 kubectl exec \$RADIUS -- apt-get install -y tcpdump
391 _TAG=radius-tcpdump kubectl exec \$RADIUS -- tcpdump -w out.pcap&
392
393 # Start the tcp-dump in ONOS
394 for i in \$(seq 0 \$ONOSES); do
395 INSTANCE="onos-onos-classic-\$i"
396 kubectl exec \$INSTANCE -- apt-get update
397 kubectl exec \$INSTANCE -- apt-get install -y tcpdump
398 kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
399 _TAG=\$INSTANCE kubectl exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
400 done
401 fi
402 """
403 }
404 }
405 }
406 stage('Load MIB Template') {
407 when {
408 expression {
409 return params.withMibTemplate
410 }
411 }
412 steps {
413 sh """
414 # load MIB template
415 wget ${mibTemplateUrl} -O mibTemplate.json
416 cat mibTemplate.json | kubectl exec -it \$(kubectl get pods |grep etcd-0 | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/go_templates/BBSM/v0.0.1/BBSM_IMG_00001
417 """
418 }
419 }
420 stage('Run Test') {
421 steps {
422 sh '''
423 mkdir -p $WORKSPACE/RobotLogs
424 cd $WORKSPACE/voltha-system-tests
425 make vst_venv
426 '''
427 sh '''
428 if [ ${withProfiling} = true ] ; then
429 mkdir -p $LOG_FOLDER/pprof
430 echo $PATH
431 #Creating Python script for ONU Detection
432 cat << EOF > $WORKSPACE/pprof.sh
433timestamp() {
434 date +"%T"
435}
436
437i=0
438while [[ true ]]; do
439 ((i++))
440 ts=$(timestamp)
441 go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
442 go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
443 curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
444 go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
445
446 go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
447 go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
448 curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
449 go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
450
451 go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
452 go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
453 curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
454 go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
455
456 sleep 10
457done
458EOF
459
460 _TAG="pprof"
461 _TAG=$_TAG bash $WORKSPACE/pprof.sh &
462 fi
463 '''
464 timeout(time: "${testTimeout.toInteger() + 5}", unit: 'MINUTES') {
465 sh '''
466 ROBOT_PARAMS="--exitonfailure \
467 -v olt:${olts} \
468 -v pon:${pons} \
469 -v onu:${onus} \
470 -v ONOS_SSH_PORT:30115 \
471 -v ONOS_REST_PORT:30120 \
472 -v workflow:${workflow} \
473 -v withEapol:${withEapol} \
474 -v withDhcp:${withDhcp} \
475 -v withIgmp:${withIgmp} \
476 -v timeout:${testTimeout}m \
477 -v withMaclearning:${withMaclearning} \
478 --noncritical non-critical \
479 -e onu-upgrade -e igmp -e teardown "
480
481 if [ ${withEapol} = false ] ; then
482 ROBOT_PARAMS+="-e authentication "
483 fi
484
485 if [ ${withDhcp} = false ] ; then
486 ROBOT_PARAMS+="-e dhcp "
487 fi
488
489 if [ ${provisionSubscribers} = false ] ; then
490 # if we're not considering subscribers then we don't care about authentication and dhcp
491 ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
492 fi
493
494 if [ ${withFlows} = false ] ; then
495 ROBOT_PARAMS+="-i setup -i activation "
496 fi
497
498 if [ ${withOnuUpgrade} = true ] ; then
499 ROBOT_PARAMS+="-e flow-before "
500 fi
501
502 cd $WORKSPACE/voltha-system-tests
503 source ./vst_venv/bin/activate
504 robot -d $WORKSPACE/RobotLogs \
505 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
506
507 python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
508 cat $WORKSPACE/execution-time.txt
509 '''
510 }
511 }
512 }
513 stage('Run ONU Upgrade Tests') {
514 environment {
515 ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/OnuUpgradeTests"
516 }
517 when {
518 expression {
519 return params.withOnuUpgrade
520 }
521 }
522 options {
523 timeout(time: "${testTimeout.toInteger() + 1}", unit: 'MINUTES')
524 }
525 steps {
526 sh '''
527 set +e
528 mkdir -p $ROBOT_LOGS_DIR
529 cd $WORKSPACE/voltha-system-tests
530 make vst_venv
531 '''
532 script {
533 Exception caughtException = null
534
535 catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
536 try {
537 sh '''
538 ROBOT_PARAMS="--exitonfailure \
539 -v olt:${olts} \
540 -v pon:${pons} \
541 -v onu:${onus} \
542 -v workflow:${workflow} \
543 -v withEapol:${withEapol} \
544 -v withDhcp:${withDhcp} \
545 -v withIgmp:${withIgmp} \
546 -v timeout:${testTimeout}m \
547 -v withMaclearning:${withMaclearning}
548 -v image_version:BBSM_IMG_00002 \
549 -v image_url:http://bbsim0:50074/images/software-image.img \
550 -v image_vendor:BBSM \
551 -v image_activate_on_success:false \
552 -v image_commit_on_success:false \
553 -v image_crc:0 \
554 -v ONOS_SSH_PORT:30115 \
555 -v ONOS_REST_PORT:30120 \
556 --noncritical non-critical \
557 -i onu-upgrade \
558 -e setup -e activation -e flow-before \
559 -e authentication -e provision -e flow-after \
560 -e dhcp -e igmp -e teardown "
561 cd $WORKSPACE/voltha-system-tests
562 source ./vst_venv/bin/activate
563 robot -d $ROBOT_LOGS_DIR \
564 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
565 '''
566 } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
567 // if the error is a timeout don't mark the build as failed
568 println "ONU Upgrade test timed out"
569 } catch (Throwable e) {
570 caughtException = e
571 }
572 }
573
574 if (caughtException) {
575 error caughtException.message
576 }
577 }
578 }
579 }
580 stage('Run Igmp Tests') {
581 environment {
582 ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/IgmpTests"
583 }
584 when {
585 expression {
586 return params.withIgmp
587 }
588 }
589 options {
590 timeout(time: "${testTimeout.toInteger() + 1}", unit: 'MINUTES')
591 }
592 steps {
593 sh returnStdout: false, script: """
594 # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.store.group.impl
595 """
596 sh '''
597 set +e
598 mkdir -p $ROBOT_LOGS_DIR
599 cd $WORKSPACE/voltha-system-tests
600 make vst_venv
601 '''
602 script {
603 Exception caughtException = null
604
605 catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
606 try {
607 sh '''
608 ROBOT_PARAMS="--exitonfailure \
609 -v olt:${olts} \
610 -v pon:${pons} \
611 -v onu:${onus} \
612 -v workflow:${workflow} \
613 -v withEapol:${withEapol} \
614 -v withDhcp:${withDhcp} \
615 -v withIgmp:${withIgmp} \
616 -v timeout:${testTimeout}m \
617 -v withMaclearning:${withMaclearning}
618 -v ONOS_SSH_PORT:30115 \
619 -v ONOS_REST_PORT:30120 \
620 --noncritical non-critical \
621 -i igmp \
622 -e setup -e activation -e flow-before \
623 -e authentication -e provision -e flow-after \
624 -e dhcp -e onu-upgrade -e teardown "
625 cd $WORKSPACE/voltha-system-tests
626 source ./vst_venv/bin/activate
627 robot -d $ROBOT_LOGS_DIR \
628 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
629 '''
630 } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
631 // if the error is a timeout don't mark the build as failed
632 println "IGMP test timed out"
633 } catch (Throwable e) {
634 caughtException = e
635 }
636 }
637
638 if (caughtException) {
639 error caughtException.message
640 }
641 }
642 }
643 }
644 stage("Device removal") {
645 options {
646 timeout(time: "${testTimeout.toInteger() + 5}", unit: 'MINUTES')
647 }
648 steps {
649 sh '''
650 set +e
651 mkdir -p $ROBOT_LOGS_DIR
652 cd $WORKSPACE/voltha-system-tests
653 make vst_venv
654 '''
655 script {
656 Exception caughtException = null
657
658 catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
659 try {
660 sh '''
661 ROBOT_PARAMS="--exitonfailure \
662 -v olt:${olts} \
663 -v pon:${pons} \
664 -v onu:${onus} \
665 -v ONOS_SSH_PORT:30115 \
666 -v ONOS_REST_PORT:30120 \
667 -v workflow:${workflow} \
668 -v withEapol:${withEapol} \
669 -v withDhcp:${withDhcp} \
670 -v withIgmp:${withIgmp} \
671 -v timeout:${testTimeout}m \
672 -v withMaclearning:${withMaclearning} \
673 --noncritical non-critical \
674 -i teardown"
675
676 cd $WORKSPACE/voltha-system-tests
677 source ./vst_venv/bin/activate
678 robot -d $WORKSPACE/RobotLogs \
679 $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
680 '''
681 } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
682 // if the error is a timeout don't mark the build as failed
683 println "Cleanup test timed out"
684 } catch (Throwable e) {
685 caughtException = e
686 }
687 }
688 }
689 }
690 }
691 }
692 post {
693 always {
694 stopComponentsLogs()
695 // collect result, done in the "post" step so it's executed even in the
696 // event of a timeout in the tests
697 sh '''
698 if [ ${withPcap} = true ] ; then
699 # stop ofAgent tcpdump
700 P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
701 if [ -n "\$P_ID" ]; then
702 kill -9 \$P_ID
703 fi
704
705 # stop radius tcpdump
706 P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
707 if [ -n "\$P_ID" ]; then
708 kill -9 \$P_ID
709 fi
710
711 # stop onos tcpdump
712 LIMIT=$(($NUM_OF_ONOS - 1))
713 for i in $(seq 0 $LIMIT); do
714 INSTANCE="onos-onos-classic-$i"
715 P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
716 if [ -n "\$P_ID" ]; then
717 kill -9 \$P_ID
718 fi
719 done
720
721 # copy the file
722 export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
723 kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
724
725 export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
726 kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
727
728 LIMIT=$(($NUM_OF_ONOS - 1))
729 for i in $(seq 0 $LIMIT); do
730 INSTANCE="onos-onos-classic-$i"
731 kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
732 done
733 fi
734 '''
735 sh '''
736 if [ ${withProfiling} = true ] ; then
737 _TAG="pprof"
738 P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
739 if [ -n "$P_IDS" ]; then
740 echo $P_IDS
741 for P_ID in $P_IDS; do
742 kill -9 $P_ID
743 done
744 fi
745 fi
746 '''
747 plot([
748 csvFileName: 'scale-test.csv',
749 csvSeries: [
750 [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
751 [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
752 [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
753 [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
754 [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
755 [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
756 [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
757 [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
758 [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
759 [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
760 ],
761 group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus}, UNIs: ${unis})", yaxis: 'Time (s)', useDescr: true
762 ])
763 script {
764 try {
765 step([$class: 'RobotPublisher',
766 disableArchiveOutput: false,
767 logFileName: '**/log*.html',
768 otherFiles: '',
769 outputFileName: '**/output*.xml',
770 outputPath: 'RobotLogs',
771 passThreshold: 100,
772 reportFileName: '**/report*.html',
773 onlyCritical: true,
774 unstableThreshold: 0]);
775 } catch (Exception e) {
776 println "Cannot archive Robot Logs: ${e.toString()}"
777 }
778 }
779
780 getPodsInfo("$LOG_FOLDER")
781 // get all the logs from kubernetes PODs
782 sh returnStdout: false, script: '''
783 # copy the ONOS logs directly from the container to avoid the color codes
784 printf '%s\n' $(kubectl get pods -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
785
786 # get ONOS cfg from the 3 nodes
787 # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-0-cfg.txt || true
788 # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-1-cfg.txt || true
789 # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-2-cfg.txt || true
790
791 # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-0-next-objs.txt || true
792 # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-1-next-objs.txt || true
793 # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-2-next-objs.txt || true
794
795 # get radius logs out of the container
796 kubectl cp $(kubectl get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER/radius.log || true
797 '''
798 // dump all the BBSim(s) ONU information
799 sh '''
800 BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
801 IDS=($BBSIM_IDS)
802
803 for bbsim in "${IDS[@]}"
804 do
805 kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
806 kubectl exec -t $bbsim -- bbsimctl uni list > $LOG_FOLDER/$bbsim-uni-list.txt || true
807 kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
808 kubectl exec -t $bbsim -- bbsimctl olt resources GEM_PORT > $LOG_FOLDER/$bbsim-flows-gem-ports.txt || true
809 kubectl exec -t $bbsim -- bbsimctl olt resources ALLOC_ID > $LOG_FOLDER/$bbsim-flows-alloc-ids.txt || true
810 kubectl exec -t $bbsim -- bbsimctl olt pons > $LOG_FOLDER/$bbsim-pon-resources.txt || true
811 done
812 '''
813 script {
814 // first make sure the port-forward is still running,
815 // sometimes Jenkins kills it regardless of the JENKINS_NODE_COOKIE=dontKillMe
816 def running = sh (
817 script: 'ps aux | grep port-forw | grep -E "onos|voltha" | grep -v grep | wc -l',
818 returnStdout: true
819 ).trim()
820 // if any of the voltha-api, onos-rest, onos-ssh port-forwards are not there
821 // kill all and restart
822 if (running != "3") {
823 start_port_forward(olts)
824 }
825 }
826 // get ONOS debug infos
827 sh '''
828
829 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt
830 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt
831 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt
832 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt
833 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg get > $LOG_FOLDER/onos-cfg.txt
834 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 netcfg > $LOG_FOLDER/onos-netcfg.txt
835
836 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt
837 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt
838
839 if [ ${withFlows} = true ] ; then
840 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt
841 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt
842 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt
843 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-port-status > $LOG_FOLDER/onos-volt-port-status.txt
844 fi
845
846 if [ ${provisionSubscribers} = true ]; then
847 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt
848 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt
849 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt
850 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt
851 fi
852
853 if [ ${withEapol} = true ] ; then
854 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt
855 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt
856 fi
857
858 if [ ${withDhcp} = true ] ; then
859 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt
860 fi
861
862 if [ ${withIgmp} = true ] ; then
863 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-routes > $LOG_FOLDER/onos-mcast-host-routes.txt
864 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-show > $LOG_FOLDER/onos-mcast-host-show.txt
865 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 groups > $LOG_FOLDER/onos-groups.txt
866 fi
867
868 if [ ${withMaclearning} = true ] ; then
869 sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mac-learner-get-mapping > $LOG_FOLDER/onos-maclearning-host-mappings.txt
870 fi
871 '''
872 // collect etcd metrics
873 sh '''
874 mkdir -p $WORKSPACE/etcd-metrics
875 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
876 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
877 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
878 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
879 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-sum.json || true
880 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-bucket.json || true
881 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_wal_fsync_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-wal-fsync-time-bucket.json || true
882 curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_network_peer_round_trip_time_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-network-peer-round-trip-time-seconds.json || true
883 etcd_namespace=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$1}')
884 etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
885 kubectl exec -it -n \$etcd_namespace \$etcd_container -- etcdctl defrag --cluster || true
886 kubectl exec -it -n \$etcd_namespace \$etcd_container -- etcdctl endpoint status -w table > $WORKSPACE/etcd-metrics/etcd-status-table.txt || true
887
888 '''
889 // get VOLTHA debug infos
890 script {
891 try {
892 sh '''
893 voltctl -m 32MB device list -o json > $LOG_FOLDER/device-list.json || true
894 python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
895 rm $LOG_FOLDER/device-list.json || true
896 voltctl -m 32MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
897
898 printf '%s\n' $(voltctl -m 32MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
899 printf '%s\n' $(voltctl -m 32MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
900
901 printf '%s\n' $(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
902 printf '%s\n' $(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
903 '''
904 } catch(e) {
905 sh '''
906 echo "Can't get device list from voltclt"
907 '''
908 }
909 }
910 // get cpu usage by container
911 sh '''
912 if [ ${withMonitoring} = true ] ; then
913 cd $WORKSPACE/voltha-system-tests
914 make vst_venv
915 source ./vst_venv/bin/activate || true
916 sleep 60 # we have to wait for prometheus to collect all the information
917 python scripts/sizing.py -o $WORKSPACE/plots || true
918 fi
919 '''
920 archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
921 }
922 }
923}
924
925def start_port_forward(olts) {
926 sh """
927 bbsimRestPortFwd=50071
928 for i in {0..${olts.toInteger() - 1}}; do
929 daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/bbsim\${i} \${bbsimRestPortFwd}:50071
930 ((bbsimRestPortFwd++))
931 done
932 """
933}