| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Test various end-to-end scenarios with ATT workflow |
| Suite Setup Setup Suite |
| Suite Teardown Teardown Suite |
| Test Setup Setup Test |
| Test Teardown Teardown Test |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../Framework/utils/utils.py |
| Resource ../../Framework/utils/utils.robot |
| Library ../../Framework/restApi.py |
| Resource ../../Framework/Subscriber.robot |
| Resource ../../Framework/ATTWorkFlowDriver.robot |
| Resource ../../Framework/Kubernetes.robot |
| Resource ../../Framework/ONU.robot |
| Resource ../../Framework/OLT.robot |
| Resource ../../Framework/DHCP.robot |
| Variables ../../Properties/RestApiProperties.py |
| |
| *** Variables *** |
| ${POD_NAME} flex-pod1-olt |
| ${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs |
| ${HELM_CHARTS_DIR} ~/helm-charts |
| ${WHITELIST_PATHFILE} ${CURDIR}/data/${POD_NAME}/ATTWhiteList.json |
| ${SUBSCRIBER_PATHFILE} ${CURDIR}/data/${POD_NAME}/ATTSubscriber.json |
| ${VOLT_DEVICE_PATHFILE} ${CURDIR}/data/${POD_NAME}/RealOLTDevice.json |
| ${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml |
| ${VOLTHA_POD_NUM} 8 |
| |
| *** Test Cases *** |
| ONU in Correct Location |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| |
| ONU in Correct Location -> Remove ONU from Whitelist -> Add ONU to Whitelist |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| ... Remove ONU from whitelist |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Add ONU to whitelist |
| ... Validate successful authentication/DHCP/E2E ping |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| Clean Up Linux |
| Remove Whitelist |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication False wpa_supplicant.conf |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Create Whitelist |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| |
| ONU in Correct Location -> ONU in Wrong Location -> ONU in Correct Location |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| ... Update whitelist with wrong ONU location |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Update whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| Clean Up Linux |
| Update Whitelist with Wrong Location |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication False wpa_supplicant.conf |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Update Whitelist with Correct Location |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| |
| ONU in Correct Location -> Remove Subscriber -> Create Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| ... Remove subscriber model |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Recreate subscriber model |
| ... Validate successful authentication/DHCP/E2E ping |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| Clean Up Linux |
| Remove Subscriber |
| Validate Authentication False wpa_supplicant.conf |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| |
| ONU in Correct Location (Skip Subscriber Provisioning) -> Provision Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location and skip provisioning subscriber |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Provision subscriber |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| Create Whitelist |
| Create VOLT |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Validate Authentication False wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| |
| ONU in Correct Location (Skip Authentication) |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location and skip RG authentication |
| ... Validate failed authentication/DHCP/E2E ping |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate DHCP and Ping False False |
| |
| ONU not in Whitelist |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Skip whitelist configuration for ONU |
| ... Validate failed authentication/DHCP/E2E ping |
| [Setup] None |
| Create Subscriber |
| Create VOLT |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication False wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate DHCP and Ping False False |
| |
| ONU not in Whitelist (Skip Subscriber Provisioning) -> Add ONU to Whitelist -> Provision Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Skip whitelist configuration for ONU and subscriber provisioning |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Configure whitelist with correct ONU location |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Provision subscriber |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| Create VOLT |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Validate Authentication False wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Create Whitelist |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Validate Authentication False wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| |
| ONU in Wrong Location |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with wrong ONU location |
| ... Validate failed authentication/DHCP/E2E ping |
| Update Whitelist with Wrong Location |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication False wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate DHCP and Ping False False |
| |
| ONU with Wrong Location (Skip Subscriber Provisioning) -> ONU with Correct Location -> Provision Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with wrong ONU location and skip subscriber provisioning |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Configure whitelist with correct ONU location |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Provision subscriber |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| [Tags] Debug |
| Create VOLT |
| Create Whitelist |
| Update Whitelist with Wrong Location |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Validate Authentication False wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Update Whitelist with Correct Location |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Validate Authentication False wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Validate DHCP and Ping False False |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Validate Authentication True wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Validate DHCP and Ping True True |
| |
| *** Keywords *** |
| Setup Suite |
| ${auth} = Create List ${XOS_USER} ${XOS_PASSWD} |
| ${HEADERS} Create Dictionary Content-Type=application/json |
| Create Session ${server_ip} http://${server_ip}:${server_port} auth=${AUTH} headers=${HEADERS} |
| ${att_workflow_service_id}= Get Service Owner Id ${ATT_SERVICE} |
| ${volt_service_id}= Get Service Owner Id ${VOLT_SERVICE} |
| ${AttWhiteListList}= utils.jsonToList ${WHITELIST_PATHFILE} AttWhiteListInfo |
| Set Suite Variable ${AttWhiteListList} |
| ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0 |
| ${AttWhiteListDict}= utils.setFieldValueInDict ${AttWhiteListDict} owner_id ${att_workflow_service_id} |
| ${onu_device}= Get From Dictionary ${AttWhiteListDict} serial_number |
| Set Global Variable ${onu_device} |
| ${onu_location}= Get From Dictionary ${AttWhiteListDict} pon_port_id |
| Set Global Variable ${onu_location} |
| ${SubscriberList}= utils.jsonToList ${SUBSCRIBER_PATHFILE} SubscriberInfo |
| Set Global Variable ${SubscriberList} |
| ${SubscriberDict}= utils.listToDict ${SubscriberList} 0 |
| ${s_tag}= utils.getFieldValueFromDict ${SubscriberDict} s_tag |
| ${c_tag}= utils.getFieldValueFromDict ${SubscriberDict} c_tag |
| ${VoltDeviceList}= utils.jsonToList ${VOLT_DEVICE_PATHFILE} VOLTDeviceInfo |
| Set Global Variable ${VoltDeviceList} |
| Set Suite Variable ${s_tag} |
| Set Suite Variable ${c_tag} |
| Set Global Variable ${export_kubeconfig} export KUBECONFIG=${KUBERNETES_CONF} |
| # Read variables from yaml file |
| ${src_ip}= Evaluate ${hosts}.get("src").get("ip") |
| ${src_user}= Evaluate ${hosts}.get("src").get("user") |
| ${src_pass}= Evaluate ${hosts}.get("src").get("pass") |
| ${src_container_name}= Evaluate ${hosts}.get("src").get("container_name") |
| ${src_iface}= Evaluate ${hosts}.get("src").get("dp_iface_name") |
| ${dst_ip}= Evaluate ${hosts}.get("dst").get("ip") |
| ${dst_user} = Evaluate ${hosts}.get("dst").get("user") |
| ${dst_pass}= Evaluate ${hosts}.get("dst").get("pass") |
| ${dst_container_name}= Evaluate ${hosts}.get("dst").get("container_name") |
| ${dst_dp_iface}= Evaluate ${hosts}.get("dst").get("dp_iface_name") |
| ${dst_dp_ip}= Evaluate ${hosts}.get("dst").get("dp_iface_ip_qinq") |
| ${olt_ip}= Evaluate ${olts}[0].get("ip") |
| ${olt_user}= Evaluate ${olts}[0].get("user") |
| ${olt_pass}= Evaluate ${olts}[0].get("pass") |
| Set Suite Variable ${src_ip} |
| Set Suite Variable ${src_user} |
| Set Suite Variable ${src_pass} |
| Set Suite Variable ${src_container_name} |
| Set Suite Variable ${src_iface} |
| Set Suite Variable ${dst_ip} |
| Set Suite Variable ${dst_user} |
| Set Suite Variable ${dst_pass} |
| Set Suite Variable ${dst_container_name} |
| Set Suite Variable ${dst_dp_iface} |
| Set Suite Variable ${dst_dp_ip} |
| Set Suite Variable ${olt_ip} |
| Set Suite Variable ${olt_user} |
| Set Suite Variable ${olt_pass} |
| |
| Teardown Suite |
| [Documentation] Performs any additional cleanup required |
| Log Suite Teardown cleanup |
| Delete All Sessions |
| |
| Setup Test |
| [Documentation] Re-create Subscriber, whitelist, and olt-device models to test |
| Log Re-creating objects |
| Create Whitelist |
| Create Subscriber |
| Create VOLT |
| |
| Create Whitelist |
| ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0 |
| CORD Post ${ATT_WHITELIST} ${AttWhiteListDict} |
| |
| Create Subscriber |
| ${SubscriberDict}= utils.listToDict ${SubscriberList} 0 |
| Wait Until Keyword Succeeds 120s 15s CORD Post ${VOLT_SUBSCRIBER} ${SubscriberDict} |
| |
| Create VOLT |
| ${VoltDeviceDict}= utils.listToDict ${VoltDeviceList} 0 |
| CORD Post ${VOLT_DEVICE} ${VoltDeviceDict} |
| |
| Teardown Test |
| [Documentation] Delete xos objects, kills processes and cleans up interfaces on src+dst servers |
| Clean Up Linux |
| Clean Up XOS |
| |
| Clean Up Linux |
| [Documentation] Kill processes and clean up interfaces on src+dst servers |
| Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword And Ignore Error Kill Linux Process [d]hclient ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword If '${dst_ip}' != '${None}' Run Keyword And Ignore Error Kill Linux Process [d]hcpd ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_name} |
| Delete IP Addresses from Interface on Remote Host ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword If '${dst_ip}' != '${None}' Delete Interface on Remote Host ${dst_dp_iface}.${s_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_name} |
| |
| Clean Up XOS |
| [Documentation] Clean up all XOS objects and reinstall voltha after OLT reboots |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_SUBSCRIBER} |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_DEVICE} |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${ATT_WHITELIST} |
| Wait Until Keyword Succeeds 120s 10s Check Remote System Reachability False ${olt_ip} |
| Wait Until Keyword Succeeds 120s 10s Check Remote System Reachability True ${olt_ip} |
| Wait Until Keyword Succeeds 120s 10s Openolt is Up ${olt_ip} ${olt_user} ${olt_pass} |
| Wait Until Keyword Succeeds 300s 10s Reinstall Voltha |
| |
| Remove Whitelist |
| ${whitelist_id}= Retrieve Whitelist Entry ${onu_device} |
| CORD Delete ${ATT_WHITELIST} ${whitelist_id} |
| |
| Update Whitelist with Wrong Location |
| ${whitelist_id}= Retrieve Whitelist Entry ${onu_device} |
| CORD Put ${ATT_WHITELIST} {"pon_port_id": 55 } ${whitelist_id} |
| |
| Update Whitelist with Correct Location |
| ${whitelist_id}= Retrieve Whitelist Entry ${onu_device} |
| CORD Put ${ATT_WHITELIST} {"pon_port_id": ${onu_location} } ${whitelist_id} |
| |
| Validate ONU States |
| [Arguments] ${expected_op_status} ${expected_admin_status} |
| ${operational_status} ${admin_status} ONU Status Check ${onu_device} |
| Should Be Equal ${operational_status} ${expected_op_status} |
| Should Be Equal ${admin_status} ${expected_admin_status} |
| |
| Validate ATT Workflow Driver SI |
| [Arguments] ${expected_status} ${expected_auth_status} |
| ${onu_state} ${authentication_status} Service Instance Status Check ${onu_device} |
| Should Be Equal ${onu_state} ${expected_status} |
| Should Be Equal ${authentication_status} ${expected_auth_status} |
| |
| Validate Subscriber Status |
| [Arguments] ${exepected_status} |
| ${status} Subscriber Status Check ${onu_device} |
| Should Be Equal ${status} ${exepected_status} |
| |
| Validate Authentication |
| [Arguments] ${auth_pass} ${conf_file} |
| [Documentation] Executes a particular auth request on the RG and verifies if it succeeds. auth_pass determines if authentication should pass |
| Send EAPOL Message ${src_iface} ${conf_file} ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds 30s 2s Check Remote File Contents True /tmp/wpa.log authentication completed successfully ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword If '${auth_pass}' == 'False' Sleep 10s |
| Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log authentication completed successfully ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| |
| Validate DHCP and Ping |
| [Arguments] ${dhcp_should_pass} ${ping_should_pass} |
| Run Keyword If '${dst_ip}' != '${None}' Run Keywords |
| ... Add Double Vlan Interface on Host ${dst_dp_iface} ${s_tag} ${c_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_name} AND |
| ... Add IP Address on Interface on Host ${dst_dp_ip}/24 ${dst_dp_iface}.${s_tag}.${c_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_name} AND |
| ... Start DHCP Server on Remote Host ${dst_dp_iface}.${s_tag}.${c_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_name} |
| Send Dhclient Request ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword If '${dhcp_should_pass}' == 'True' Wait Until Keyword Succeeds 60s 5s Check IPv4 Address on DHCP Client True ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword If '${dhcp_should_pass}' == 'False' Sleep 10s |
| Run Keyword If '${dhcp_should_pass}' == 'False' Check IPv4 Address on DHCP Client False ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| Run Keyword If '${ping_should_pass}' == 'True' Wait Until Keyword Succeeds 60s 5s Check Ping True ${dst_dp_ip} ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| ... ELSE Wait Until Keyword Succeeds 60s 5s Check Ping False ${dst_dp_ip} ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_name} |
| |
| Reinstall Voltha |
| Run ${export_kubeconfig}; helm delete --purge voltha |
| Wait Until Keyword Succeeds 60s 10s Helm Chart is Removed voltha |
| Wait Until Keyword Succeeds 120s 10s Kubernetes PODs in Namespace are Removed voltha |
| Run ${export_kubeconfig}; cd ${HELM_CHARTS_DIR}; helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/ |
| Run ${export_kubeconfig}; cd ${HELM_CHARTS_DIR}; helm dep up voltha |
| Run ${export_kubeconfig}; helm install -n voltha -f ${KUBERNETES_YAML} --set etcd-operator.customResources.createEtcdClusterCRD=false ${HELM_CHARTS_DIR}/voltha |
| Run ${export_kubeconfig}; helm upgrade -f ${KUBERNETES_YAML} --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ${HELM_CHARTS_DIR}/voltha |
| Wait Until Keyword Succeeds 60s 10s Kubernetes PODs in Namespace are Running voltha ${VOLTHA_POD_NUM} |
| Sleep 10s |