| import os |
| import sys |
| import unittest |
| from nose.tools import * |
| from CordTestConfig import setup_module |
| from CordTestUtils import log_test |
| from VolthaCtrl import VolthaCtrl |
| |
| class voltha_exchange(unittest.TestCase): |
| |
| OLT_TYPE = 'tibit_olt' |
| OLT_MAC = '00:0c:e2:31:12:00' |
| VOLTHA_HOST = 'localhost' |
| VOLTHA_REST_PORT = 8881 |
| voltha = None |
| |
| @classmethod |
| def setUpClass(cls): |
| cls.voltha = VolthaCtrl(cls.VOLTHA_HOST, rest_port = cls.VOLTHA_REST_PORT) |
| |
| def test_olt_enable(self): |
| log_test.info('Enabling OLT type %s, MAC %s' %(self.OLT_TYPE, self.OLT_MAC)) |
| status = self.voltha.enable_device(self.OLT_TYPE, self.OLT_MAC) |
| assert_equal(status, True) |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue auth request packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber is authenticated successfully. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_failure(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls without cert auth packet is being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_using_invalid_cert(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets and exchange invalid cert from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls with invalid cert auth packet is being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_with_aaa_app_deactivation(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls without sending client hello, it's not being exchanged between client, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_radius_server(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls with restart of radius server and packets are being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_with_disabled_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Disable olt which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_disabling_uni_port_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Disable uni port which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Restart olt which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_onu(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Restart onu which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between two subscriber, onos and freeradius. |
| 5. Verify that two subscribers are authenticated successfully. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_using_same_certificates(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that two valid certificates are being exchanged between two subscriber, onos and freeradius. |
| 5. Verify that two subscribers are not authenticated. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_initiating_invalid_tls_packets_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between valid subscriber, onos and freeradius. |
| 5. Validate that eap tls valid auth packets are being exchanged between invalid client, onos and freeradius. |
| 6. Verify that valid subscriber authenticated successfully. |
| 7. Verify that invalid subscriber are not authenticated successfully. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_initiating_invalid_cert_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between valid subscriber, onos and freeradius. |
| 5. Validate that eap tls invalid cert auth packets are being exchanged between invalid subscriber, onos and freeradius. |
| 6. Verify that valid subscriber authenticated successfully. |
| 7. Verify that invalid subscriber are not authenticated successfully. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_with_one_uni_port_disabled(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between two subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Disable one of the uni port which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between one subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| 10. Verify that other subscriber authenticated successfully. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_request_with_invalid_broadcast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac broadcast from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_request_with_invalid_multicast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac multicast from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_request_with_invalid_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac zero from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_request_and_release(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send dhcp release from residential subscrber to dhcp server which is running as onos app. |
| 6 Verify that subscriber should not get ip from dhcp server, ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_starvation_positive_scenario(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Repeat step 3 and 4 for 10 times. |
| 6 Verify that subscriber should get ip from dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_starvation_negative_scenario(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber without of pool ip to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| 5. Repeat steps 3 and 4 for 10 times. |
| 6 Verify that subscriber should not get ip from dhcp server. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_sending_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Repeat step 3 for 50 times. |
| 6 Verify that subscriber should get same ip which was received from 1st discover from dhcp server. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_sending_multiple_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send DHCP request to dhcp server which is running as onos app. |
| 6. Repeat step 5 for 50 times. |
| 7. Verify that subscriber should get same ip which was received from 1st discover from dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_requesting_desired_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired ip address from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip which was requested in step 3 from dhcp server successfully. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcp_requesting_desired_out_pool_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired out of pool ip address from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip which was requested in step 3 from dhcp server, and its offered only within dhcp pool of ip. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_deactivate_dhcp_app_in_onos(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Deactivate dhcp server app in onos. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_renew_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send dhcp renew packet to dhcp server which is running as onos app. |
| 6. Repeat step 4. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_rebind_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send dhcp rebind packet to dhcp server which is running as onos app. |
| 6. Repeat step 4. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_disable_olt_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_disable_enable_olt_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| 8. Enable olt devices which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_disable_onu_port_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| """ |
| def test_subscriber_with_voltha_for_dhcp_disable_enable_onu_port_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| 8. Enable onu port which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcp_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got different ips from dhcp server successfully. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcp_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Repeat step 3 and 4 for 10 times for both subscribers. |
| 6 Verify that subscribers should get same ips which are offered the first time from dhcp server. |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_multiple_discover_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Repeat step 3 and 4 for 10 times for only one subscriber and ping to gateway from other subscriber. |
| 6 Verify that subscriber should get same ip which is offered the first time from dhcp server and other subscriber ping to gateway should not failed |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_discover_desired_ip_address_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from one residential subscriber to dhcp server which is running as onos app. |
| 3. Send dhcp request with desired ip from other residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got different ips (one subscriber desired ip and other subscriber random ip) from dhcp server successfully. |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_discover_within_and_wothout_dhcp_pool_ip_addresses(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired wihtin dhcp pool ip from one residential subscriber to dhcp server which is running as onos app. |
| 3. Send dhcp request with desired without in dhcp pool ip from other residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got different ips (both subscriber got random ips within dhcp pool) from dhcp server successfully. |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_disable_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should not failed. |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_disable_enable_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should not failed. |
| 8. Enable onu port on which was disable at step 5 and ping to gateway from other subscriber. |
| 9. Repeat step 3 and 4 for one subscriber where uni port is up now. |
| 10. Verify that subscriber should get ip from dhcp server and other subscriber ping to gateway should not failed. |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_disable_olt_detected_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed. |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_disable_enable_olt_detected_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed. |
| 8. Enable the olt device which is detected in voltha. |
| 9. Verify that subscriber should get ip from dhcp server and other subscriber ping to gateway should not failed. |
| """ |
| def test_two_subscriber_with_voltha_for_dhcp_pause_olt_detected_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Pause the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed. |
| """ |
| def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server successfully. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_with_invalid_broadcast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac broadcast from residential subscrber to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_with_invalid_multicast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac multicast from residential subscrber to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_with_invalid_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac zero from residential subscrber to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_and_release(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server successfully. |
| 5. Send dhcp release from residential subscrber to external dhcp server. |
| 6 Verify that subscriber should not get ip from external dhcp server, ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_starvation(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Repeat step 3 and 4 for 10 times. |
| 6 Verify that subscriber should get ip from external dhcp server.. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_starvation_negative_scenario(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber without of pool ip to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server.. |
| 5. Repeat steps 3 and 4 for 10 times. |
| 6 Verify that subscriber should not get ip from external dhcp server.. |
| """ |
| def test_subscriber_with_voltha_for_dhcpRelay_sending_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Repeat step 3 for 50 times. |
| 6 Verify that subscriber should get same ip which was received from 1st discover from external dhcp server.. |
| """ |
| def test_subscriber_with_voltha_for_dhcpRelay_sending_multiple_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Send DHCP request to external dhcp server. |
| 6. Repeat step 5 for 50 times. |
| 7. Verify that subscriber should get same ip which was received from 1st discover from external dhcp server.. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_requesting_desired_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired ip address from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip which was requested in step 3 from external dhcp server. successfully. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_requesting_desired_out_of_pool_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired out of pool ip address from residential subscriber to external dhcp server. |
| 4. Verify that subscriber should not get ip which was requested in step 3 from external dhcp server., and its offered only within dhcp pool of ip. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_deactivating_dhcpRelay_app_in_onos(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Deactivate dhcp server app in onos. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_renew_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Send dhcp renew packet to external dhcp server. |
| 6. Repeat step 4. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_rebind_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Send dhcp rebind packet to external dhcp server. |
| 6. Repeat step 4. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_disable_olt_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_toggling_olt_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| 8. Enable olt devices which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_disable_onu_port_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcpRelay_disable_enable_onu_port_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| 8. Enable onu port which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got different ips from external dhcp server. successfully. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Repeat step 3 and 4 for 10 times for both subscribers. |
| 6 Verify that subscribers should get same ips which are offered the first time from external dhcp server.. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_multiple_discover_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Repeat step 3 and 4 for 10 times for only one subscriber and ping to gateway from other subscriber. |
| 6 Verify that subscriber should get same ip which is offered the first time from external dhcp server. and other subscriber ping to gateway should not failed |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_discover_desired_ip_address_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from one residential subscriber to external dhcp server. |
| 3. Send dhcp request with desired ip from other residential subscriber to external dhcp server. |
| 4. Verify that subscribers had got different ips (one subscriber desired ip and other subscriber random ip) from external dhcp server. successfully. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_discover_in_range_and_out_of_range_from_dhcp_pool_ip_addresses(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired wihtin dhcp pool ip from one residential subscriber to external dhcp server. |
| 3. Send dhcp request with desired without in dhcp pool ip from other residential subscriber to external dhcp server. |
| 4. Verify that subscribers had got different ips (both subscriber got random ips within dhcp pool) from external dhcp server. successfully. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_disable_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_toggle_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| 8. Enable onu port on which was disable at step 5 and ping to gateway from other subscriber. |
| 9. Repeat step 3 and 4 for one subscriber where uni port is up now. |
| 10. Verify that subscriber should get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_disable_olt_detected_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_toggle_olt_detected_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed. |
| 8. Enable the olt device which is detected in voltha. |
| 9. Verify that subscriber should get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| """ |
| |
| def test_two_subscriber_with_voltha_for_dhcpRelay_pause_olt_detected_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Pause the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed. |
| """ |